September 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 382889] New: logrotate's "mailfirst" option is not correctly working
by bugzilla_noreply＠novell.com 06 Mar '09

06 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=382889 Summary: logrotate's "mailfirst" option is not correctly working Product: openSUSE 10.2 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andreas.pfaller(a)gmail.com QAContact: qa(a)suse.de Found By: --- logrotate mails the "about-to-expire" files in addition to the "just-rotated" files despite the use of the "mailfirst" option if mailing of logs is requested with the "mail" option. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 337072] New: XEN Can't start a Domain: Error: (12, ' Cannot allocate memory')
by bugzilla_noreply＠novell.com 06 Mar '09

06 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=337072 Summary: XEN Can't start a Domain: Error: (12, 'Cannot allocate memory') Product: openSUSE 10.3 Version: Final Platform: x86 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Xen AssignedTo: cgriffin(a)novell.com ReportedBy: franz.fleischmann(a)landshut.org QAContact: qa(a)suse.de Found By: --- Created an attachment (id=180802) --> (https://bugzilla.novell.com/attachment.cgi?id=180802) Output from dmesg On our xen-server there was running during the last week no domain. Today I started a PVM-Domain without any problems. When I try to start a HVM-Domain i get the error-msg: Error: (12, 'Cannot allocate memory'). But this should not be possible. The system has 12 GB memory and the pvm-domain uses only 396 M. The free command in the dom0 shows more than 11 GB free: total used free shared buffers cached Mem: 12059648 797592 11262056 0 170612 277596 -/+ buffers/cache: 349384 11710264 Swap: 506036 0 506036 After reducing the memory in Dom0 to 1 GB with xm mem-set Domain-0 1024 i tried to start the PVM-domain again and the system freezes. After a reboot of the system there is no problem to start both PVM and HVM-domains. For better diagnostics i attached some files. Most important are the output from "xm desg" and the xend.log -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 19

[Bug 327391] New: Pidgin doesn't use keyring
by bugzilla_noreply＠novell.com 06 Mar '09

06 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=327391 Summary: Pidgin doesn't use keyring Product: openSUSE 10.3 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: alberto.passalacqua(a)tin.it QAContact: qa(a)suse.de Found By: --- Pidgin doesn't save passwords in GNOME keyring, but it uses its own file. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 335555] New: scim/skim input method causes serious focus problems
by bugzilla_noreply＠novell.com 06 Mar '09

06 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=335555 Summary: scim/skim input method causes serious focus problems Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: kq8z67r6309fo9001(a)sneakemail.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Under a variety of circumstances, having skim running can cause applications to permanently lose the ability to receive keyboard input. Many programs seem to be affected, including xterm, opera, swing-based java applications, but triggering the bug reliably is not simple. Sometimes switching desktops will do it. Sometimes rapidly opening and closing a dialog, or otherwise changing focus within an application will do it. The following is the only completely reliable trigger I've found: 1. Log in to kde, making sure skim starts (it appears to do so automatically if it's installed) 2. Start openoffice.org calc 3. ctrl+f to open the find dialog 4. esc to close the find dialog The result is that OO apparently no longer receives keyboard events. The program itself operates properly otherwise, and responds to the mouse. As mentioned previously, there are many other instances where similar results can be obtained, though in some cases the application can be revived up opening a new window, typing in it, and closing it. In other cases, it appears to be a complete loss. Using the gtk-scim panel applet rather than skim or using a different window manager seems to influence some of these bugs, but never eliminates them. This is with: skim-1.4.5-120 scim-anthy-1.2.4-28 scim-m17n-0.2.2-70 scim-1.4.7-24 scim-qtimm-0.9.4-121 installed and no manual configuration. I've verified this on two 10.3 installs and a 10.2 install, so this has probably been around for awhile. Sorry if this is a duplicate: Novell bugzilla's search has just been returning "gateway unreachable" for me. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 290279] New: sound card C-media CM6501 not listed
by bugzilla_noreply＠novell.com 05 Mar '09

05 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=290279 Summary: sound card C-media CM6501 not listed Product: openSUSE 10.3 Version: Alpha 5 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: m.munnix(a)redcross.be QAContact: jsrain(a)novell.com Found By: --- Created an attachment (id=150164) --> (https://bugzilla.novell.com/attachment.cgi?id=150164) log from hwinfo --sound --log log this sound device is integrated on the main board (ASRock AM2NF3-VSTA) and is listed in the manual as C-Media CM6501. The manual does not state that it is a usb device, so it would be nice if YaST sound module could at least list it with the correct driver. 1. model CM6501 not listed for this manufacturer 2. not detected as sound device by hwinfo The driver "snd_usb_audio" works # lsusb Bus 003 Device 002: ID 0424:20fc Standard Microsystems Corp. 6-in-1 Card Reader Bus 003 Device 001: ID 0000:0000 Bus 002 Device 002: ID 0d8c:0201 C-Media Electronics, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 # hwinfo --sound lists nothing but # hwinfo --usb lists a PnP Audio Device 14: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_d8c_201_noserial_if0 Unique ID: Zj8l.wilKvUxD7v0 Parent ID: pBe4.XN7UF4mi9R2 SysFS ID: /devices/pci0000:00/0000:00:02.1/usb2/2-4/2-4:1.0 SysFS BusID: 2-4:1.0 Hardware Class: unknown Model: "PnP Audio Device" Hotplug: USB Vendor: usb 0x0d8c Device: usb 0x0201 "PnP Audio Device" Revision: "0.10" Driver: "snd-usb-audio" Driver Modules: "snd_usb_audio" Speed: 12 Mbps Module Alias: "usb:v0D8Cp0201d0010dc00dsc00dp00ic01isc01ip00" Driver Info #0: Driver Status: snd_usb_audio is active Driver Activation Cmd: "modprobe snd_usb_audio" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #11 (Hub) attaching log from # hwinfo --sound --log log where the device was examined but not selected for listing of audio devices -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 30

[Bug 327503] New: KDE Menu Item "Calender" Icon Looks Dated
by bugzilla_noreply＠novell.com 05 Mar '09

05 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=327503 Summary: KDE Menu Item "Calender" Icon Looks Dated Product: openSUSE 10.3 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: malv_star(a)hotmail.com QAContact: qa(a)suse.de Found By: --- This icon for the KDE Menu Item "Office" -> "Calender" looks extremely out of place compared to the smoothness of the other icons in the menu. Perhaps this icon could be replaced with a different one for the sake of visual consistency? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 334676] New: after a while keyboard is dead
by bugzilla_noreply＠novell.com 05 Mar '09

05 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=334676 Summary: after a while keyboard is dead Product: openSUSE 10.3 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: bluedzins(a)wp.pl QAContact: qa(a)suse.de Found By: --- I cannot say anything about how to reproduce it. It just happened for me several times (in OS 10.3 only, in OS 10.2 -- never), and it looks like it happen again. So... I simply work, switch desktop, write something, use KMail, Konqueror, nothing unusual. And all of the sudden keyboard is dead -- pressing caps lock does not help, adding additional keyboard does not change anything. I have to close all apps using mouse, end session, and keyboard works. So I am able to log in again and work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 63

[Bug 373124] New: runlevel scripts is crossing time settings.
by bugzilla_noreply＠novell.com 05 Mar '09

05 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=373124 Summary: runlevel scripts is crossing time settings. Product: openSUSE 10.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: root(a)proximasociale.cz QAContact: qa(a)suse.de Found By: --- runlevel scripts is crossing time settings, which results into state, when time is every boot and poweroff set to false value .. it is done by commands hwclock --set 'new-time' && hwclock --hctosys reference about this issue can be found here :: http://lists.opensuse.org/opensuse/2002-01/msg00537.html http://suseforums.net/lofiversion/index.php/t41692.html and om much more places :: work-around is:: run $(yast sysconfig) and there find key 'system->environment->systohc' and set there value to no. is a smart to have by default this option enabled? ps. because i am quite lazy, i let my clock lives as they wanted and i've lived with inaccurate time for weeks and months.. i've found this key accidentally. regards by ntz -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 361270] New: We should try to get rid of SuSEconfig.groff
by bugzilla_noreply＠novell.com 05 Mar '09

05 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=361270 Summary: We should try to get rid of SuSEconfig.groff Product: openSUSE 11.0 Version: Alpha 2 Platform: All OS/Version: Linux Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mfabian(a)novell.com QAContact: qa(a)suse.de Found By: Development We should try to get rid of SuSEconfig.groff. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 345617] New: no (easy?) way to change system font hinting setting
by bugzilla_noreply＠novell.com 05 Mar '09

05 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=345617 Summary: no (easy?) way to change system font hinting setting Product: openSUSE 10.3 Version: Final Platform: Other OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: jdluhos(a)novell.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- I have not found any way to change the default font hinting used by openSUSE. It can be easily overriden for a specific user - there are GUI tools for it, e.g. in KDE - but there is no appropriate tool for setting the system-wide default setting (not even in the YaST config file editor). The only way to achieve this is manually adding /etc/fonts/local.conf with desired settings. This is occassionally needed because OpenOffice seems not to honor the per-user setting, and changing the system default is the only way to change its hinting (the default hinting unfortunately looks ugly on some LCDs). :-( -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10