August 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 412190] New: Can' t add a custom firewall rule with colon separated port range.
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=412190 Summary: Can't add a custom firewall rule with colon separated port range. Product: openSUSE 10.3 Version: Final Platform: All OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: nice(a)titanic.nyme.hu QAContact: jsrain(a)novell.com Found By: Other YaST accepts colon separated ranges neither as source nor a destination port in the yast firewall config module at "custom rules" (despite offering this possibility). The desired effect can be achieved only by editing /etc/sysconfig/SuSEfirewall2 manually. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 402517] New: Installation from tar balls not working
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=402517 Summary: Installation from tar balls not working Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: U.Koehler(a)gmx.de QAContact: jsrain(a)novell.com Found By: Customer I changed the installation option to use tar ball instead of rpm packages. I switched it off by mistake and reactivated it. As a result, the installation failed with warnings the libzio could not be found. Installation without changing the option worked fine from tar balls. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 386546] New: Pulse audio applet is useless and confusing
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=386546 Summary: Pulse audio applet is useless and confusing Product: openSUSE 11.0 Version: Beta 2 Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: christian.jaeger(a)rub.de QAContact: qa(a)suse.de Found By: --- With regard to the discussin on the GNOME mailing-list (http://lists.opensuse.org/opensuse-gnome/2008-05/msg00000.html) I want to suggest to remove pulse audio applet from the default GNOME configuration. It is a hardware-related applet that will hardly ever touched by an average user and only leads to confusion and wasted screen-estate. A user expects to get a volume-control when clicking on an audio-applet; nothing more. The pulse audio applet would require the user to make three clicks before getting to the volume control - and he/she would have to find that control first! So please keep GNOME usable and replace that applet by GNOME's good, old volume control applet. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 355241] New: Iconsistent name usage
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=355241 Summary: Iconsistent name usage Product: openSUSE 11.0 Version: Alpha 1 Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Joachim.Reichelt(a)helmholtz-hzi.de QAContact: qa(a)suse.de Found By: Beta-Customer The system creates /dev/tape/.... if there is a tape found. mt and related tools use as the default /dev/tape as the char-dev (translated: mt: /dev/tape ist keine Buchstaben-Spezial-Datei) it whould be nice to make (tar ?? and) mt using the first real tape, if there is on. I know, that several users/programmers insist of tar falling back to stdin/stdout. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 399998] New: provide a way to group online repos
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=399998 Summary: provide a way to group online repos Product: openSUSE 11.1 Version: Alpha 0 Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: YaST2 AssignedTo: locilka(a)novell.com ReportedBy: coolo(a)novell.com QAContact: jsrain(a)novell.com Found By: --- I want main repos first no matter what their name says -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 392086] New: Harddrivehandling when trying to upgrade from 10. 3 to Opensuse 11.0
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=392086 Summary: Harddrivehandling when trying to upgrade from 10.3 to Opensuse 11.0 Product: openSUSE 11.0 Version: Beta 3 Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: skunze(a)novell.com QAContact: jsrain(a)novell.com Found By: --- In my System are 2 SATA Drive and 1 IDE Drive. In 10.3 they are recognized as follows: SATA 1 /dev/sda SATA 2 /dev/sdb IDE /dev/sdc The 10.3 partitioning is as follows: /dev/sda1 /boot ext2 /dev/sda2 /swap swap /dev/sda3 / ext3 /dev/sda4 /home ext3 /dev/sdc1 /Files ext3 /dev/sdb is empty When i am trying to install 11.0 Beta3 the hard drives are recognized as follows IDE /dev/sda SATA1 /dev/sdb SATA2 /dev/sdc When i am trying to upgrade the 10.3 partitions - he gives me one Partition which i can upgrade - /dev/sdb3 - which is logical. But when i select it YaST tries to mount the /boot and the /home and fails because he cannot mount /dev/sdc1 and /dev/sdc4 . When i manually change this to /dev/sdb1 and /dev/sdb4 YaST is able to mount the partitions. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 19

[Bug 407688] New: mounting old file systems failed when updating a 10. 3 to 11.0
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=407688 Summary: mounting old file systems failed when updating a 10.3 to 11.0 Product: openSUSE 11.0 Version: Final Platform: 32bit OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: rfno(a)fietze-home.de QAContact: jsrain(a)novell.com Found By: Customer Created an attachment (id=226821) --> (https://bugzilla.novell.com/attachment.cgi?id=226821) sfdisk listing The system to be updated is a 10.3 using 3 disks, one IDE and two SCSI disks. The IDE disk contains some LVM partitions. The fstab of the old system is in the attachment as, well as the outputs of sfdisk, pvscan, fgscan and lvscan. The root partition is detected bu the openSUSE 11.0 installer, trying to mount all the other file systems fails with sda3 and sdb7. Somehow the installer is confused. Exactly the same constellation worked when updating from 10.0 to 10.1 to 10.2 and to 10.3 (the separate /var was a problem in the last update, as you might know). I tried to scan for PVs, VGs and LVs on tty after I got the errors and checked y2log. I really do not yet know why mounting my old problems should be a problem at all. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 414092] New: [games/micropolis] incorrect rpm macro used in spec
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=414092 Summary: [games/micropolis] incorrect rpm macro used in spec Product: openSUSE.org Version: unspecified Platform: All OS/Version: All Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: prusnak(a)novell.com ReportedBy: wolfgang(a)rosenauer.org QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- perl -pi -e 's,GAMESDATADIR,%{_gamesdatadir},;s,LIBDIR,%{_libdir},' Micropolis %{_gamesdatadir} is used in the resulting startscript -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 401873] New: Installer breaks fstab
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=401873 Summary: Installer breaks fstab Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Update Problems AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: cus(a)fazekas.hu QAContact: jsrain(a)novell.com Found By: --- I did an update from OpenSuSE 10.3 to 11.0. I had the following line in my fstab, before the update: /dev/disk/by-id/ata-SAMSUNG_SP2504C_S09QJ1QP301209-part6 /data2 It turned to: /dev/sda6 /data2 This is totally wrong, because /dev/sda is another hard disk, /dev/sdb6 would be the correct partition. In fact, /dev/sda6 is part of a software raid array here. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 414198] New: 3D graphics is uber-slow with openSuse 11 and Intel i965GM
by bugzilla_noreply＠novell.com 04 Aug '08

04 Aug '08

https://bugzilla.novell.com/show_bug.cgi?id=414198 Summary: 3D graphics is uber-slow with openSuse 11 and Intel i965GM Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: tony(a)daylessday.org QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Hardware: Lenovo Thinkpad T61 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) Both Openarena and Nexuiz became barely usable after 10.3 -> 11.0 upgrade, they consume nearly 100% all the time, even if I turn off all possible features. DRI is enabled in xorg.conf, I tried applying all tweaks I found (including changing AccelMethod, setting MigrationHeuristic to "gready" etc. etc. No changes at all. Installing 11.0 updates doesn't change anything. Updating to Factory makes it 2x _slower_ (which is probably another issue, but still worth to mention). I can see there is a total mess in i965 drivers (upstream) with patches being applied in random order, but I couldn't find any patches that would fix the issue. openSuse 10.3 worked like a charm, please make it work again. If you need any info, let me know. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2