July 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 346194] New: prevent hard and dvd drive from unnecessary spinups
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=346194 Summary: prevent hard and dvd drive from unnecessary spinups Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: estellnb(a)gmail.com QAContact: qa(a)suse.de Found By: Community of Practice On a system with two hard disks the second disk /dev/sdb spins up from time to time although no file or swap partition is mounted fromout of that drive. This is ala long not good for the physics of that drive and can be very annoying because /dev/sdb is quite noisy; hdparm -Y /dev/sdb helps up to the next spinup (openSuse 10.3; smartctl already mentions a worsened spinup time; maybe because of continuing multiple unnecessary spinups). Similarely on a notebook under Suse10.1 a cdrom is spinned up multiple times during the boot process, if any is inserted, although there is no reason to access the cd during boot time (noisy, slows the boot process down). There should not be any program accessing a drive without mounted partitions. Is there any? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 341415] New: Logwatch does not process Apache2 logs
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=341415#c334167 Summary: Logwatch does not process Apache2 logs Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: David.Walker(a)ucop.edu QAContact: qa(a)suse.de Found By: --- As I mentioned in Bug #334167, logwatch does not process Apache2 logs, as they are not properly mentioned in logwatch's configuration files, and the archives are created with .bz2 compression. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 348026] New: Kdump not working on fenberry with 2.6.24-rc4 kernel
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=348026 Summary: Kdump not working on fenberry with 2.6.24-rc4 kernel Product: openSUSE 10.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: sassmann(a)novell.com ReportedBy: bwalle(a)novell.com QAContact: qa(a)suse.de CC: olh(a)novell.com Found By: Development Kernel version: 2.6.24-rc5-20071211230003-ppc64 ------------------------ fenberry login: SysRq : Emergency Remount R/O^M SysRq : Trigger a crashdump Sending IPI to other cpus... ------------------------ Then nothing happens. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 393951] New: hostname not known during 2nd stage
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=393951 Summary: hostname not known during 2nd stage Product: openSUSE 11.0 Version: Beta 3plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jsuchome(a)novell.com QAContact: jsrain(a)novell.com Found By: --- Created an attachment (id=217793) --> (https://bugzilla.novell.com/attachment.cgi?id=217793) y2logs Kerberos-client configuration should offer reasonable defaults, it takes domain name from Hostname::CurrentDomain() to build some. However, during 2nd stage of installation ([*]) this function returns "site" as current domain: it doesn't know the correct values from DHCP. [*] This means: start installation, use Automatic Configuration, in dialog with user setup select LDAP + Kerberos. In automatic 2nd stage, Kerberos dialog appears after LDAP which is at at time when network configuration should already be done. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 246142] New: Corruption in ZMD updater Icon in System Tray with further repercussion of NO visual update tool available.
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=246142 Summary: Corruption in ZMD updater Icon in System Tray with further repercussion of NO visual update tool available. Product: openSUSE 10.2 Version: Final Platform: i386 OS/Version: SuSE Other Status: NEW Severity: Major Priority: P5 - None Component: Update Problems AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alpha096(a)tpg.com.au QAContact: jsrain(a)novell.com Background: General available update applied 3 days ago - all o.k System Stable, nothing happening out of ordinary. Have AUTO Hibernate turned on after 61Mins. Sometimes after recovery from Hibernate I am asked to input screen saver code and other not. Sometimes after Hibernate - error "Suspend Failed - ok" after which system seems to be functioning correctly. I have no issue nor concern about Hibernate - This is just background info!!!!!!!!!!!!!!!!!! No errors have been reported by any application nor has O/S issues any notable error. This morning I re-booted PC and ZMD icon appeared as a red X and right click options grayed out. Hovering over Icon == "ZMD Not Running" - See Attached. Cold-Boot PC - same incorrect display of Icon. Opened YAST>System>System Services - locate ZMD service - See Attached. Swapped to Expert Mode and started Service - service started without error of any type. - See Attached On Closing System Services Major error from ZMD - See attached After closing error Window, Zen Icon disappears from System tray - See Attached Re-Boot PC - exactly same scenario will occur without exception Attaching Screen shots then ZMD logs - Please advise if you require Yast logs as well -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 16

[Bug 385951] New: mcrypt cannot read files written in openpgp format
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=385951 Summary: mcrypt cannot read files written in openpgp format Product: openSUSE 10.2 Version: Final Platform: x86-64 OS/Version: openSUSE 10.2 Status: NEW Severity: Normal Priority: P5 - None Component: Security AssignedTo: security-team(a)suse.de ReportedBy: R.Vickers(a)cs.rhul.ac.uk QAContact: qa(a)suse.de Found By: Customer Created an attachment (id=211942) --> (https://bugzilla.novell.com/attachment.cgi?id=211942) Unencrypted file The mcrypt command has problems reading files written in OpenPGP format. To demonstrate this, encrypt a file with the -g option and then try to decrypt it on the same machine. For example: $ mcrypt -V -g test.gz Enter the passphrase (maximum of 512 characters) Please use a combination of upper and lower case letters and numbers. Enter passphrase: Enter passphrase: Algorithm: rijndael-128 Keysize: 32 Mode: ncfb Keyword mode: s2k-isalted-sha1 File format: openpgp Input File: test.gz Output File: test.gz.nc File test.gz was encrypted. aspasia$ mcrypt -V -d test.gz.nc An OpenPGP encrypted file has been detected. mcrypt: test.gz already exists; do you wish to overwrite (y or n)? Signal 2 caught. Exiting. aspasia$ cp test.gz.nc try.nc aspasia$ mcrypt -d -V try.nc An OpenPGP encrypted file has been detected. Enter passphrase: decryption: wrong key. Algorithm: rijndael-128 Keysize: 32 Mode: ncfb Keyword mode: s2k-isalted-sha1 File format: openpgp Input File: try.nc Output File: try File try.nc was NOT decrypted successfully. Note that: (1) The file CAN be decrypted on a 10.3 system (2) Using -g when decrypting does not help (3) OpenPGP is the default on 10.3, so files encrypted under 10.3 cannot be decrypted under 10.2 (I will submit a separate bug report about this) (4) The problem occurs on both 64 and 32 bit systems I will attach the files I used for this, and the passphrase is "passphrase". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 410683] New: Bluetooth Headset does not work. Motorola H350. No sound.
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=410683 Summary: Bluetooth Headset does not work. Motorola H350. No sound. Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: carlos.bessa(a)gmail.com QAContact: qa(a)suse.de Found By: Other Created an attachment (id=228906) --> (https://bugzilla.novell.com/attachment.cgi?id=228906) asoundrc file Using openSUSE 11 64bit (KDE3.5) and can't get a bluetooth headset to work. I'm following the instructions on the bluez wiki: Created the .asoundrc file and /etc/bluetooth/audio.service, which didn't exist(yast does not a have a bluetooth module anymore where one would be able to choose/start bluetooth services). The device seems to connect and pair correctly, acording to kbluetooth, but i can't play anything. #mplayer-ao alsa:bluetooth /**.mp3 just shows: #[AO_ALSA] alsa-lib: pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM bluetooth #[AO_ALSA] Playback open error: No such file or directory #Could not open/initialize audio device -> no sound. #Audio: no sound #Video: no video I don't think i'm even running the audio service?! thanks for any help regards, Carlos -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 31

[Bug 341385] New: vlock-1.4-19: missing expression in return statement
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=341385 Summary: vlock-1.4-19: missing expression in return statement Product: openSUSE 10.3 Version: Final Platform: All OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dcb314(a)hotmail.com QAContact: qa(a)suse.de Found By: --- I just tried to compile package vlock-1.4-19 The compiler said sysrq.c:32: warning: 'return' with no value, in function returning non-void sysrq.c:53: warning: 'return' with no value, in function returning non-void The source code is int disable_sysrq(void) { sysrq_file = fopen(SYSRQ_PATH, "r+"); if (!sysrq_file) { fprintf(stderr, "Warning: couldn't open '%s': %s\n", SYSRQ_PATH, strerror(errno)); return; Suggest add expression to return statement. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 350980] New: The system stops doing things till I press a key or move the mouse: every things halts.
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=350980 Summary: The system stops doing things till I press a key or move the mouse: every things halts. Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: robin.listas(a)telefonica.net QAContact: qa(a)suse.de Found By: --- This is very weird. Sometimes, the system simply stops "working". Doesn't crash, simply all tasks seems stopped. Nothing refreshes in the display. The clock stops. A script running a loop in a console: #!/bin/bash while true ; do # date +"%T" | tee -a /home/cer/marca.log date +"%T" >> /home/cer/marca.log sleep 1 done stops as well. Then, as soon as I move the mouse or touch a key (shift, for instance) everything continues and the clock jumps some seconds or minutes to the correct time. I have tried several things, as discussed in the "opensuse" mail list (<http://lists.opensuse.org/opensuse/2007-12/msg01780.html>). No effect. - check the desktop for powersave features - nothing, and there is nothing configurable that would kick in in seconds of no user activity. - pass cpufreq=no as a boot argument --> no good. - Recompile the kernel with "NO_HZ" --> even worse (this is the current state). I will recompile again to undo. And more things I forgot, but you can read the whole story in the mail list or the link above. Sometimes, very random, the system stops completely and does not respond to keyboard, but it awakes when I boot another PC, which I think tries to connect or ask for a service (ntp or dns). My current hack is to leave my router continuously pinging me. My guess is that the pings cause the network card to interrupt the kernel, so it keeps awake. Keyboard or mouse also provokes interrupts. I'm not sure about usb activity. This might be related to other bugs reported by me, I don't know (spamd timeout?) I have been "playing" with the clock (Bug 344356 and a new one not reported yet). The thing is that the kernel defaults to using "acpi_pm" clock and this one misses whole minutes. I have to force use "tsc" (which kernel disabled at boot). jiffies crashes. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 59

[Bug 381132] New: [multiscreen]: Need to add a confirm dialog box after clicking apply
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=381132 Summary: [multiscreen]: Need to add a confirm dialog box after clicking apply Product: openSUSE 11.0 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: captain.magnus(a)opensuse.org QAContact: qa(a)suse.de Found By: --- I have an old CRT monitor that I connected and I set the resolution to high. After I clicked apply, the CRT tells me that the resolution is out of range. Problem is that "Monitor Resolution Settings" moved over to that monitor after apply so I can't see it anymore. We need to have a timed confirm dialog box after clicking apply, wheres if I don't acknowledge the new setup within 10 seconds, it should revert. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9