July 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 382708] New: no description in some groupwise appointments ...
by bugzilla_noreply＠novell.com 14 Mar '09

14 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=382708 Summary: no description in some groupwise appointments ... Product: openSUSE 11.0 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Blocker Priority: P5 - None Component: Evolution AssignedTo: bnc-team-evolution(a)forge.provo.novell.com ReportedBy: mmeeks(a)novell.com QAContact: lakhil(a)novell.com CC: kframe(a)novell.com, jpr(a)novell.com Found By: --- I received a Groupwise appointment from Kelli: it showed up in my calendar at the correct time etc. & all was well :-) However - the description with what was required for the meeting, call-in-details (etc.) was missing. This is not true for other / older groupwise appointments (eg. the recurring staff meeting) - which has a fine description. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 19

[Bug 407531] New: "Error - No kernel was found. The installation may have failed" after new DomU installation.
by bugzilla_noreply＠novell.com 13 Mar '09

13 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=407531 Summary: "Error - No kernel was found. The installation may have failed" after new DomU installation. Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Xen AssignedTo: cgriffin(a)novell.com ReportedBy: mgould(a)novell.com QAContact: qa(a)suse.de Found By: Field Engineer openSUSE 11 (2.6.25.5-1.1-xen and 2.6.25.9-0.2-xen) on 4Gb Dell D830 (Intel Core2 Duo CPU T9300 64 Bit) using traditional networking (ifconfig) and hard IP address (not DHCP). KDE: 3.5.9 "release 49.1" Two guest OS - different manifestation of the same issue, I believe: (1) If I install SLED *or* SLES 10SP2 (just do a default install: next, next, next...) then it will go through all the install screens and copy all the files but when it gets to the first reboot will display "Error - No kernel was found. The installation may have failed." (2) If I install NetWare 6.5SP7 then when I boot from the DVD ISO it says "Preparing to start NetWare... Press any key to interrupt" (so I wait) then it says: Error: 1323 Error: 1391 Error: 871 Type: S to Start NetWare P to specify start parameters H for Help Selecting anything displays "error loading server" and it loops through the above. I am successfully running Xen on SLES10 on other hardware. I have successfully run Xen on SLED10SP1 on *this* hardware. (It was running SLED & Xen OK then I rebuilt it with openSUSE 11 & Xen which is not OK). I have tried different installation sources so my source media is not corrupt. I have removed and re-added the Xen components via YaST. Can find nothing via Bugzilla, Google, Novell's forums or openSUSE forums. ***NOTE*** During UK work hours I'm on Novell's internal network if anyone wants to ssh in and see this first hand ***NOTE*** -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 31

[Bug 407592] New: USB HC takeover failed! (BIOS/SMM bug) pantech
by bugzilla_noreply＠novell.com 13 Mar '09

13 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=407592 User rrawson(a)ciscony.com added comment https://bugzilla.novell.com/show_bug.cgi?id=407592#c4 Summary: USB HC takeover failed! (BIOS/SMM bug) pantech Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: rrawson(a)ciscony.com QAContact: qa(a)suse.de Found By: Customer Dell Lattitude D830, 4Gb RAM, Pantech (Verizon) PC5750 WWAN adapter Problem is that adapter is not detected so it cannot be set up as a modem. Removing and re-inserting card, the following is displayed in dmesg: pccard: CardBus card inserted into slot 0 PCI: Enabling device 0000:04:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:04:00.0 to 64 ohci_hcd 0000:04:00.0: OHCI Host Controller ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 ohci_hcd 0000:04:00.0: USB HC takeover failed! (BIOS/SMM bug) ohci_hcd 0000:04:00.0: can't setup ohci_hcd 0000:04:00.0: USB bus 8 deregistered ACPI: PCI interrupt for device 0000:04:00.0 disabled ohci_hcd 0000:04:00.0: init 0000:04:00.0 fail, -16 ohci_hcd: probe of 0000:04:00.0 failed with error -16 PCI: Enabling device 0000:04:00.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:04:00.1 to 64 ohci_hcd 0000:04:00.1: OHCI Host Controller ohci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 8 ohci_hcd 0000:04:00.1: USB HC takeover failed! (BIOS/SMM bug) ohci_hcd 0000:04:00.1: can't setup ohci_hcd 0000:04:00.1: USB bus 8 deregistered lspci ----- 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) Subsystem: Dell Device 01fe Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Dell Device 01fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at efe8 [size=8] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) Subsystem: Dell Device 01fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 01fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f20 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 01fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device 01fe Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) Subsystem: Dell Device 01fe Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 2, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0300c Data: 4161 Capabilities: [90] Subsystem: Dell Device 01fe Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 Memory behind bridge: fe800000-fe8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0300c Data: 4169 Capabilities: [90] Subsystem: Dell Device 01fe Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe600000-fe7fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 5, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0300c Data: 4171 Capabilities: [90] Subsystem: Dell Device 01fe Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Memory behind bridge: fe500000-fe5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee0300c Data: 4179 Capabilities: [90] Subsystem: Dell Device 01fe Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 01fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f80 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 01fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f60 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 01fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 6f40 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device 01fe Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=07, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: fe400000-fe4fffff Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Dell Device 01fe 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) Subsystem: Dell Device 01fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device 01fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 6fa0 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix, pata_acpi, ata_generic, ide-pci-generic, piix 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device 01fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 6eb0 [size=8] Region 1: I/O ports at 6eb8 [size=4] Region 2: I/O ports at 6ec0 [size=8] Region 3: I/O ports at 6ec8 [size=4] Region 4: I/O ports at 6ee0 [size=16] Region 5: I/O ports at eff0 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ata_piix Kernel modules: ata_piix, pata_acpi, ata_generic, ide-pci-generic 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) Subsystem: Dell Device 01fe Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe9fbf00 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21) Subsystem: Dell Device 01fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe400000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: f4000000-f7fff000 (prefetchable) Memory window 1: 20000000-23fff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) (prog-if 10 [OHCI]) Subsystem: Dell Device 01fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe4ff000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at fe4fe800 (32-bit, non-prefetchable) [size=2K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: ohci1394 Kernel modules: ohci1394 04:00.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) Subsystem: Device 19cd:a500 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 19 Region 0: Memory at 120000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: ohci-hcd 04:00.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) Subsystem: Device 19cd:a500 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 0: Memory at 120001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: ohci-hcd 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02) Subsystem: Dell Device 01fe Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 4347 Region 0: Memory at fe5f0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0100c Data: 4199 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 06-50-9f-fe-ff-23-1c-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01) Subsystem: Dell Device 0007 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [d0] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Kernel driver in use: b43-pci-bridge Kernel modules: ssb lspci -nnq ---------- 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) 03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21) 03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) 04:00.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 04:00.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02) 0c:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan mini-PCI [14e4:4311] (rev 01) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 95

[Bug 410684] New: unable to change video modes w/Thinkpad
by bugzilla_noreply＠novell.com 13 Mar '09

13 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=410684 Summary: unable to change video modes w/Thinkpad Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa(a)suse.de Found By: --- In opensuse 10.3, I could use my special keys to change from external monitor to the LCD and vice-versa. This no longer works with 11.0. I've attached the output from cat /proc/acpi/battery/BAT0/* /proc/acpi/thermal_zone/THM*/* /proc/acpi/processor/*/* /proc/acpi/ibm/* | tee 2.6.25.9 for each of 2.6.22.18 and 2.6.25.9. Both in single-user mode as the 2.6.22.18 kernel and openSUSE 11.0 don't play nice together. This is on a Thinkpad T61p. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18

[Bug 371756] New: No keyboard auto-repeat in X11 during installation
by bugzilla_noreply＠novell.com 13 Mar '09

13 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=371756 Summary: No keyboard auto-repeat in X11 during installation Product: openSUSE 11.0 Version: Alpha 2plus Platform: 32bit OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: sh(a)novell.com QAContact: jsrain(a)novell.com Found By: Development Keyboard auto-repeat does not work for me in X11 during installation. It works fine in a text console (Alt-F2), but not at all in X11. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 39

[Bug 350034] New: Login problems between buildservice and wiki
by bugzilla_noreply＠novell.com 13 Mar '09

13 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=350034 Summary: Login problems between buildservice and wiki Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: wiki AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: tschmidt(a)novell.com QAContact: adrian(a)novell.com Found By: --- How to reproduce (only happens every ~2nd time): - Go to https://build.opensuse.org/ - Perform login now I have cookies for opensuse.org: s_cc : true s_sq : %5B%5BB%5D%5D IPCZQX018efxxxxx : 000073002d0d4a3e023xxxxx - Go to http://en.opensuse.org/Welcome_to_openSUSE.org It shows I am not logged in. - Click on http://en.opensuse.org/index.php?title=Special:Userlogin&returnto=Welcome_t… -> It now recognices me as logged in without me entering a password. Used browser is firefox 2.0.0.10-1.1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 410712] New: Dolphin crashes when trying to paste a file to CF-Disk
by bugzilla_noreply＠novell.com 13 Mar '09

13 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=410712 User monkey9(a)iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=410712#c5 Summary: Dolphin crashes when trying to paste a file to CF-Disk Product: openSUSE 11.1 Version: Alpha 0 Platform: 64bit OS/Version: SuSE Other Status: NEW Severity: Minor Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: monkey9(a)iae.nl QAContact: qa(a)suse.de Found By: Beta-Customer If i copy a file to a CF-Disk, dolphin vanishes... Programma: Dolphin (dolphin), signaal SIGSEGV [?1034h(no debugging symbols found) [snip] (no debugging symbols found) [Thread debugging using libthread_db enabled] (no debugging symbols found) [snip] (no debugging symbols found) [KCrash handler] #5 0x00007fcea25e9c77 in QObject::disconnect () from /usr/lib64/libQtCore.so.4 #6 0x00007fcea42ff6d3 in DolphinController::setItemView () from /usr/lib64/libdolphinprivate.so.4 #7 0x00007fcea4306884 in ?? () from /usr/lib64/libdolphinprivate.so.4 #8 0x00007fcea4306be1 in ?? () from /usr/lib64/libdolphinprivate.so.4 #9 0x00007fce9f3de4fa in QWidget::event () from /usr/lib64/libQtGui.so.4 #10 0x00007fce9f799b7d in QAbstractItemView::viewportEvent () from /usr/lib64/libQtGui.so.4 #11 0x00007fcea25d60d8 in QCoreApplicationPrivate::sendThroughObjectEventFilters () from /usr/lib64/libQtCore.so.4 #12 0x00007fce9f39192c in QApplicationPrivate::notify_helper () from /usr/lib64/libQtGui.so.4 #13 0x00007fce9f3992ae in QApplication::notify () from /usr/lib64/libQtGui.so.4 #14 0x00007fcea385ecfb in KApplication::notify () from /usr/lib64/libkdeui.so.5 #15 0x00007fcea25d6df1 in QCoreApplication::notifyInternal () from /usr/lib64/libQtCore.so.4 #16 0x00007fce9f398678 in QApplicationPrivate::sendMouseEvent () from /usr/lib64/libQtGui.so.4 #17 0x00007fce9f3ef97c in ?? () from /usr/lib64/libQtGui.so.4 #18 0x00007fce9f3ee5ab in QApplication::x11ProcessEvent () from /usr/lib64/libQtGui.so.4 #19 0x00007fce9f4125bc in ?? () from /usr/lib64/libQtGui.so.4 #20 0x00007fcea25d5742 in QEventLoop::processEvents () from /usr/lib64/libQtCore.so.4 #21 0x00007fcea25d58d5 in QEventLoop::exec () from /usr/lib64/libQtCore.so.4 #22 0x00007fcea25d7985 in QCoreApplication::exec () from /usr/lib64/libQtCore.so.4 #23 0x00000000004403dd in _start () -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 410714] New: Confusing mounted CF-Disks.
by bugzilla_noreply＠novell.com 13 Mar '09

13 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=410714 Summary: Confusing mounted CF-Disks. Product: openSUSE 11.1 Version: Alpha 0 Platform: 64bit OS/Version: SuSE Other Status: NEW Severity: Minor Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: monkey9(a)iae.nl QAContact: qa(a)suse.de Found By: --- The filesystem is not visible, or not the correct one is displayed, and another name is used, so one does'nt know what partition one is putting files on... Names that do not exist anymore, are still in the list. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 406583] New: Fonts fallback with external monitor
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=406583 Summary: Fonts fallback with external monitor Product: openSUSE 11.0 Version: Final Platform: x86 OS/Version: openSUSE 10.3 Status: NEW Severity: Minor Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: jw(a)novell.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com CC: behlert(a)novell.com Blocks: 357354 Found By: --- lenovo x60s, KDE-3.5.7 on openSUSE 11.0 When the xserver is restarted with an external monitor connected to VGA I get quite different fonts. It appears to be a tiny default font. The external monitor is not configured in xorg.conf, it is a samsung syncmaster 226bw supporting 1680x1050, whereas the LVDS of the X60s is at 024x768. Using a smaller font with a bigger monitor is not helpful. My workaround is to disconnect the monitor during X-server start, and connect it only later. compare attached screenshots. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 408334] New: wake on lan not working with "VT6120/VT6121/ VT6122 Gigabit Ethernet Adapter"
by bugzilla_noreply＠novell.com 12 Mar '09

12 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=408334 Summary: wake on lan not working with "VT6120/VT6121/VT6122 Gigabit Ethernet Adapter" Product: openSUSE 11.0 Version: Final Platform: x86 OS/Version: openSUSE 11.0 Status: NEW Severity: Minor Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andreas.pfaller(a)gmail.com QAContact: qa(a)suse.de Found By: --- For some reason "wake-on-lan" is not working with this adapter. However if I insert "ifconfig eth1 192.168.1.7 up" immediately before the last line of /etc/init.d/halt everything works as expected. # ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: puag Wake-on: g Current message level: 0x00000002 (2) Link detected: yes # cat /etc/sysconfig/network/ifcfg-eth1 BOOTPROTO='static' IPADDR='192.168.1.7/24' BROADCAST='' STARTMODE='auto' NAME='VT6120/VT6121/VT6122 Gigabit Ethernet Adapter' ETHTOOL_OPTIONS='wol g' MTU='' NETWORK='' REMOTE_IPADDR='' USERCONTROL='no' # lspci -v ... 00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter (rev 11) Subsystem: Micro-Star International Co., Ltd. Device 0470 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 I/O ports at e400 [size=256] Memory at febf7c00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Kernel driver in use: via-velocity Kernel modules: via-velocity .. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12