June 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 397077] New: "debug enabled" cause an error
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=397077 Summary: "debug enabled" cause an error Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: hfiguiere(a)novell.com QAContact: adrian(a)novell.com Found By: --- in build.opensuse.org, in the project expert flags, if I click on "debug enabled" for the project, I get an error: ERROR unknown element: debug -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 397431] New: Firefox doesn't process ipv6 addresses other than ::1 ( localhost)
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=397431 Summary: Firefox doesn't process ipv6 addresses other than ::1 (localhost) Product: openSUSE 11.0 Version: RC 1 Platform: x86 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: Firefox AssignedTo: bnc-team-mozilla(a)forge.provo.novell.com ReportedBy: dsk(a)bglinux.org QAContact: qa(a)suse.de Found By: Outsourced Testing I have apache server bound to listen for ipv4/6 addresses. When I access htt://[::1] - I can see the index page of my apache. But when I try to access http://[fe80::20c:29ff:fed8:2f8] - firefox does nothing. It actually doesn't even make a request for this address. I don't see "can't connect to page" error or something of that sort. here's an output of netstat -nl|grep 80 tcp 0 0 :::80 :::* LISTEN -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 391183] New: downloaing rpm file firefox cant find associated program install program
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=391183 Summary: downloaing rpm file firefox cant find associated program install program Product: openSUSE 11.0 Version: Beta 3 Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Minor Priority: P5 - None Component: Firefox AssignedTo: bnc-team-mozilla(a)forge.provo.novell.com ReportedBy: ingesvensson(a)bredband.net QAContact: qa(a)suse.de Found By: --- 1) With firefox surf to www.skype.com 2) Click download 3) Click openSUSE 10+ 4) Open with Install Program (Standard) 5) Click OK 6) File fetch error: /tmp/skype-2.0.0.68-suse.i586-19.rpm could not be opened because the associated help prograqm doesn't exist. Change assosiation in your settings. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 395568] New: MODIFY_RESOLV_CONF_DYNAMICALLY is ignored
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=395568 User alan.mcgovern(a)gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=395568#c395555 Summary: MODIFY_RESOLV_CONF_DYNAMICALLY is ignored Product: openSUSE 11.0 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alan.mcgovern(a)gmail.com QAContact: qa(a)suse.de Found By: --- The value of that setting is ignored and resolv.conf is always automatically updated. I found this out by trying to workaround #395555. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 390824] New: Error message at end of a "repair the installed system" run
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=390824 Summary: Error message at end of a "repair the installed system" run Product: openSUSE 11.0 Version: Beta 3 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: chuller(a)novell.com QAContact: jsrain(a)novell.com Found By: Component Test Description: After I booted the "repair the installed system" to (eventually successful) fix a broken boot loader installation and the repair system finished I got presented the red ncurses pop up telling me that "An error occurred during the installation" without any further information. Hitting the ok button then leads back to the linuxrc ncurses interface Howto repeat: - boot the "repair the installed system" option from the 11.0 beta3 install disk. - Select boot loader repair - give the right root device - switch to the console - chroot into /mnt and check if /dev, /sys and /proc are mounted -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 391446] New: Speech Engine reads percentage when loading kernel
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=391446 Summary: Speech Engine reads percentage when loading kernel Product: openSUSE 11.0 Version: Beta 3 Platform: All OS/Version: openSUSE 11.0 Status: NEW Severity: Minor Priority: P5 - None Component: Booting AssignedTo: jsrain(a)novell.com ReportedBy: schneida.simon(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- The Speech Engine (which you can enable when pressing F9 during the Menu) reads the current percantage when loading the kernel. The problem is, that the Kernel loads so fast that there is only a long noise. Maybe it would be better to disable the SpeechEngine while loading the kernel. Not important but it would be better for our ears ;-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 394699] New: hwinfo does not detect monitor on VGA on Intel 945G/GL ( DELL 620 box)
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=394699 Summary: hwinfo does not detect monitor on VGA on Intel 945G/GL (DELL 620 box) Product: openSUSE 11.0 Version: Beta 3 Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dirk(a)goe.net QAContact: qa(a)suse.de Found By: --- DELL 620 mini box. lspci shows: 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 29: None 00.0: 10000 Monitor [Created at fb.71] Unique ID: rdCR.EY_qmtb9YY0 Hardware Class: monitor Model: "Generic Monitor" Vendor: "Generic" Device: "Monitor" Resolution: 1024x768@76Hz Driver Info #0: Max. Resolution: 1024x768 Vert. Sync Range: 50-90 Hz Hor. Sync Range: 31-61 kHz Config Status: cfg=new, avail=yes, need=no, active=unknown Works on the DVI port: 28: None 00.0: 10002 LCD Monitor [Created at monitor.93] Unique ID: rdCR.V97YSCE+DI5 Hardware Class: monitor Model: "DELL 1905FP" Vendor: DEL "DELL" Device: eisa 0x400d "DELL 1905FP" Serial ID: "T611758BBHYZ" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@75Hz Resolution: 800x600@60Hz Resolution: 800x600@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1152x864@75Hz Resolution: 1280x1024@60Hz Size: 376x301 mm Detailed Timings: Resolution: 1280x1024 Horizontal: 1280 1328 1440 1688 (+48 +160 +408) +hsync Vertical: 1024 1025 1028 1066 (+1 +4 +42) +vsync Frequencies: 108.00 MHz, 63.98 kHz, 60.02 Hz Driver Info #0: Max. Resolution: 1280x1024 Vert. Sync Range: 56-76 Hz Hor. Sync Range: 30-81 kHz Bandwidth: 108 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown (same situation in older OpenSUSE10.2) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 388327] New: Cannot automatically mount /tmp and /var/tmp with tmpfs
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=388327 Summary: Cannot automatically mount /tmp and /var/tmp with tmpfs Product: openSUSE 11.0 Version: Beta 2 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Booting AssignedTo: jsrain(a)novell.com ReportedBy: suse(a)bugs.jan.ritzerfeld.net QAContact: jsrain(a)novell.com Found By: Beta-Customer Maybe I am doing something wrong, but noone could help me on opensuse-factory. With 10.3, I mounted /tmp and /var/tmp with tmpfs automatically on boot by adding the following two lines to /etc/fstab: tmpfs /tmp tmpfs defaults,noexec,nosuid,nodev 0 0 tmpfs /var/tmp tmpfs defaults,noexec,nosuid,nodev 0 0 However, on 11.0 Beta2, this no longer works. /tmp and /var/tmp are remain on /. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 394686] New: hwinfo does not detect two monitors in some settings
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=394686 Summary: hwinfo does not detect two monitors in some settings Product: openSUSE 11.0 Version: Beta 3 Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dirk(a)goe.net QAContact: qa(a)suse.de Found By: --- Hardware: 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller Asrock, onboard graphics i945G chipset with DVI and VGA connector VGA: LG225 1680x1050 DVI: Acer AL712 hwinfo --monitor 29: None 00.0: 10000 Monitor [Created at monitor.93] Unique ID: rdCR.mlHAFfZX755 Hardware Class: monitor Model: "LG ELECTRONICS L225W" Vendor: GSM "LG ELECTRONICS" Device: eisa 0x5662 "L225W" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1280x1024@60Hz Resolution: 1280x960@60Hz Resolution: 1680x1050@60Hz Size: 474x296 mm Detailed Timings: Resolution: 1680x1050 Horizontal: 1680 1784 1960 2240 (+104 +280 +560) +hsync Vertical: 1050 1053 1059 1089 (+3 +9 +39) -vsync Frequencies: 146.25 MHz, 65.29 kHz, 59.95 Hz Driver Info #0: Max. Resolution: 1680x1050 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 28-83 kHz Bandwidth: 146 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown the DVI monitor is not detected. 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200] 01:05.1 Display controller: ATI Technologies Inc Device 5874 (HP desktop system with onboard graphics and DVI, VGA connector) If only one monitor is connected to DVI: 34: None 00.0: 10002 LCD Monitor [Created at monitor.95] Unique ID: rdCR.8IcUIgVbI76 Hardware Class: monitor Model: "Acer AL712" Vendor: ABO Device: eisa 0x7772 "Acer AL712" Serial ID: "ET701321003C0" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1280x1024@60Hz Size: 338x270 mm Detailed Timings #0: Resolution: 1280x1024 Horizontal: 1280 1328 1440 1688 (+48 +160 +408) +hsync Vertical: 1024 1025 1028 1066 (+1 +4 +42) +vsync Frequencies: 108.00 MHz, 63.98 kHz, 60.02 Hz Driver Info #0: Max. Resolution: 1280x1024 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 24-80 kHz Bandwidth: 108 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown 35: None 00.1: 10002 LCD Monitor [Created at monitor.95] Unique ID: jyhG.8IcUIgVbI76 Hardware Class: monitor Model: "Acer AL712" Vendor: ABO Device: eisa 0x7772 "Acer AL712" Serial ID: "ET701321003C0" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1280x1024@60Hz Size: 338x270 mm Detailed Timings #0: Resolution: 1280x1024 Horizontal: 1280 1328 1440 1688 (+48 +160 +408) +hsync Vertical: 1024 1025 1028 1066 (+1 +4 +42) +vsync Frequencies: 108.00 MHz, 63.98 kHz, 60.02 Hz Driver Info #0: Max. Resolution: 1280x1024 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 24-80 kHz Bandwidth: 108 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown If there is a display connected to VGA then the info from this channel is displayed twice and the DVI connected device ignored. See bugid 387064 too. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 395752] New: yast installer (ncurses): switching [x] check boxes to an plain x
by bugzilla_noreply＠novell.com 06 Jun '08

06 Jun '08

https://bugzilla.novell.com/show_bug.cgi?id=395752 Summary: yast installer (ncurses): switching [x] check boxes to an plain x Product: openSUSE 11.0 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ke(a)novell.com QAContact: jsrain(a)novell.com Found By: Documentation For example, in the "System probing" dialog there are several empty "[ ]" boxes in a vertial row, and while yast is probing, they get properly filled with "[x]" markers. But once the system probing is mostly done, all the [brackets] vanish and only the x letters stay, which looks odd. This happens before you switches to the "Installation Mode" dialog. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8