May 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 371487] New: Add support for Telstra/NextG CDMA
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=371487 User captain.magnus(a)opensuse.org added comment https://bugzilla.novell.com/show_bug.cgi?id=371487#c1 Summary: Add support for Telstra/NextG CDMA Product: openSUSE 11.0 Version: Alpha 2plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Hotplug AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: captain.magnus(a)opensuse.org QAContact: qa(a)suse.de Found By: --- Hello, Can we please add support for Telstra/NextG CDMA card (Australia). The following information needs to go into /usr/share/hal/fdi/information/10freedesktop/10-modem.fdi for NetworkManager to recognize the card; <match key="@info.parent:usb.vendor_id" int="0x19d2"> <match key="@info.parent:usb.product_id" int="0x0001"> <match key="@info.parent:usb.interface.number" int="0"> <append key="info.capabilities" type="strlist">modem</append> <append key="modem.command_sets" type="strlist">GSM-07.07</append> <append key="modem.command_sets" type="strlist">GSM-07.05</append> </match> </match> </match> The following is from /var/log/messages when doing 'modprobe usbserial vendor=0x19d2 product=0x0001' Mar 15 21:30:39 mblxws01 klogd: usbcore: registered new interface driver usbserial Mar 15 21:30:39 mblxws01 klogd: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic Mar 15 21:30:39 mblxws01 klogd: usbserial_generic 6-1:1.0: generic converter detected Mar 15 21:30:39 mblxws01 klogd: usb 6-1: generic converter now attached to ttyUSB0 Mar 15 21:30:39 mblxws01 klogd: usbserial_generic 6-1:1.1: generic converter detected Mar 15 21:30:39 mblxws01 klogd: usb 6-1: generic converter now attached to ttyUSB1 Mar 15 21:30:39 mblxws01 klogd: usbserial_generic 6-1:1.2: generic converter detected Mar 15 21:30:39 mblxws01 klogd: usb 6-1: generic converter now attached to ttyUSB2 Mar 15 21:30:39 mblxws01 klogd: usbcore: registered new interface driver usbserial_generic Mar 15 21:30:39 mblxws01 klogd: drivers/usb/serial/usb-serial.c: USB Serial Driver core The following information is from /var/log/messages when card is inserted; Mar 15 21:28:31 mblxws01 klogd: pccard: CardBus card inserted into slot 0 Mar 15 21:28:31 mblxws01 klogd: PCI: Enabling device 0000:0c:00.0 (0000 -> 0002) Mar 15 21:28:31 mblxws01 klogd: ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Mar 15 21:28:31 mblxws01 klogd: PCI: Setting latency timer of device 0000:0c:00.0 to 64 Mar 15 21:28:31 mblxws01 klogd: ohci_hcd 0000:0c:00.0: OHCI Host Controller Mar 15 21:28:31 mblxws01 klogd: ohci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 6 Mar 15 21:28:31 mblxws01 klogd: ohci_hcd 0000:0c:00.0: irq 16, io mem 0xb8000000 Mar 15 21:28:31 mblxws01 klogd: usb usb6: configuration #1 chosen from 1 choice Mar 15 21:28:31 mblxws01 klogd: hub 6-0:1.0: USB hub found Mar 15 21:28:31 mblxws01 klogd: hub 6-0:1.0: 3 ports detected Mar 15 21:28:31 mblxws01 klogd: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 Mar 15 21:28:31 mblxws01 klogd: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Mar 15 21:28:31 mblxws01 klogd: usb usb6: Product: OHCI Host Controller Mar 15 21:28:31 mblxws01 klogd: usb usb6: Manufacturer: Linux 2.6.25-rc4-git1-2-default ohci_hcd Mar 15 21:28:31 mblxws01 klogd: usb usb6: SerialNumber: 0000:0c:00.0 Mar 15 21:28:34 mblxws01 klogd: usb 6-1: new full speed USB device using ohci_hcd and address 2 Mar 15 21:28:34 mblxws01 klogd: usb 6-1: configuration #1 chosen from 1 choice Mar 15 21:28:34 mblxws01 klogd: usb 6-1: New USB device found, idVendor=19d2, idProduct=0001 Mar 15 21:28:34 mblxws01 klogd: usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Mar 15 21:28:34 mblxws01 klogd: usb 6-1: Product: ZTE CDMA Technologies MSM Mar 15 21:28:34 mblxws01 klogd: usb 6-1: Manufacturer: Qualcomm, Incorporated -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 257789] New: After this mornings update Kernel fails to boot with "waiting for device /dev/disk/by-id/ata-FUJITSU... to appear"
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=257789 Summary: After this mornings update Kernel fails to boot with "waiting for device /dev/disk/by-id/ata-FUJITSU... to appear" Product: openSUSE 10.3 Version: Alpha 2 Platform: i686 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: casualprogrammer(a)yahoo.com QAContact: qa(a)suse.de BugsThisDependsOn: 257340 +++ This bug was initially created as a copy of Bug #257340 +++ On an FSC Amilo Si1520 with openSuSE 10.3 alpha2plus, after updating to Kernel 2.6.21-rc4-git5-3-default the system is left unbootable :-( After correcting the boot device ( see bug 257340 ) the boot process is initiated, but stops again with: "waiting for device /dev/disk/by-id/ata-FUJITSU... to appear" After reverse updating to the old kernel and installing kernel 2.6.21-rc4-git5-3-debug, booting seems to work fine for 2.6.21-rc4-git5-3-debug . Booting to 2.6.21-rc4-git5-3-default still not possible. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 33

[Bug 257340] New: After this mornings update Kernel fails to boot with Error 23 (Error while parsing number)
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=257340 Summary: After this mornings update Kernel fails to boot with Error 23 (Error while parsing number) Product: openSUSE 10.3 Version: Alpha 2 Platform: i686 OS/Version: SuSE Other Status: NEW Severity: Blocker Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: casualprogrammer(a)yahoo.com QAContact: qa(a)suse.de On an FSC Amilo Si1520 with openSuSE 10.3 alpha2plus, after updating to Kernel 2.6.21-rc4-git5-3-default the system is left unbootable :-( -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 23

[Bug 384157] New: Fresh install from Factory does not default to NetworkManager
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=384157 Summary: Fresh install from Factory does not default to NetworkManager Product: openSUSE 11.0 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: captain.magnus(a)opensuse.org QAContact: jsrain(a)novell.com Found By: --- Created an attachment (id=210700) --> (https://bugzilla.novell.com/attachment.cgi?id=210700) yast2 logs A fresh install from todays Factory with the GNOME pattern does not default to NetworkManager. This should be changed and NM should be used. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 304841] New: Quota Support Does Not Work
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=304841 Summary: Quota Support Does Not Work Product: openSUSE 10.3 Version: Beta 2 Platform: i386 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: taroth(a)novell.com QAContact: jsrain(a)novell.com Found By: Documentation After installing Beta 2, I enabled the quota support in the Fstab options of the root partition (as I don't have a separate partition for the user homes on my test machine). YaST additionally installed the quota package and I applied the changes in the partitioner. But when trying to launch the quota plugin from the user module afterwards, YaST tells me that quota is not enabled on my system. Switching back to the partitioner and disabling and enabling the quota checkbox again did not help - I still get the same message from the user management module that quota support is not enabled. If you need logfiles or config-files from my machine to check this, please let me know which yast-logs or further files I should provide and I'll attach them. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 25

[Bug 386005] New: Promise TX4310 and RAID doesn't show logical disk
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=386005 Summary: Promise TX4310 and RAID doesn't show logical disk Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Blocker Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: info(a)mg-informatica.it QAContact: kernel-maintainers(a)forge.provo.novell.com Found By: Other Hi, the first time i start opensuse 10.3 install with the raid card and the system doesn't recognize the TX4310 Promise card. So i've remove the card and install opensuse 10.3. I've update all system, now the kernel is 2.6.22.17-0.1-default i686. I've insert the TX4310 Promise card and in the boot sequence i see that the card is recognize with kernel driver sata_promise. I've reboot and connect 4 hard drive x 320GB. I've configure RAID 5 in card bios. Now after have it recognize the card show many error on the boot: <6>scsi2 : sata_promise <6>scsi3 : sata_promise <6>scsi4 : sata_promise <6>scsi5 : sata_promise <6>ata3: SATA max UDMA/133 cmd 0xf881a200 ctl 0xf881a238 bmdma 0x00000000 irq 16 <6>ata4: SATA max UDMA/133 cmd 0xf881a280 ctl 0xf881a2b8 bmdma 0x00000000 irq 16 <6>ata5: SATA max UDMA/133 cmd 0xf881a300 ctl 0xf881a338 bmdma 0x00000000 irq 16 <6>ata6: SATA max UDMA/133 cmd 0xf881a380 ctl 0xf881a3b8 bmdma 0x00000000 irq 16 <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <6>ata3: EH pending after completion, repeating EH (cnt=4) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <6>ata3: EH pending after completion, repeating EH (cnt=3) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <6>ata3: EH pending after completion, repeating EH (cnt=2) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <6>ata3: EH pending after completion, repeating EH (cnt=1) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <3>ata3: EH pending after 5 tries, giving up <6>ata3: EH complete <6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <4>ata4.00: failed to read native max address (err_mask=0x100) <4>ata4: failed to recover some devices, retrying in 5 secs <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata4.00: failed to read native max address (err_mask=0x100) <3>ata4.00: revalidation failed (errno=-5) <4>ata4: limiting SATA link speed to 1.5 Gbps <4>ata4.00: limiting speed to UDMA7:PIO5 <4>ata4: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link .................. continue So the RAID disk is not visible and i can' use it. There is some patch? Thank you. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 386294] New: Missing support for NVIDIA-Linux-x86-173. 08 and Quadro FX 3600M
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=386294 Summary: Missing support for NVIDIA-Linux-x86-173.08 and Quadro FX 3600M Product: openSUSE 10.3 Version: Final Platform: HP OS/Version: openSUSE 10.3 Status: NEW Severity: Major Priority: P5 - None Component: SaX2 AssignedTo: ms(a)novell.com ReportedBy: nteknikk(a)monet.no QAContact: qa(a)suse.de Found By: --- Created an attachment (id=212060) --> (https://bugzilla.novell.com/attachment.cgi?id=212060) Sreenshot of SaX2, Sreen resolution and Desktop Effects The most powerful mobile workstations now use the latest NVIDIA Quadro FX 3600M GPU, so also HP Compac 8710w (a previous model with FX1500M was also certified for SLED10). The latest Nvidia Display driver for Linux version 173.08 does support FX 3600M. I followed the suggested steps to install and compile this driver and to configure X on openSUSE 10.3 as described by Nvidia http://www.nvidia.com/object/linux_display_ia32_173.08.html Afterwards it's possible with SaX2 to configure the WUXGA monitor as a LCD 1920x1200@75Hz, but SaX2 doesn't discover the GPU card and use only a generic VESA frame buffer instead. NVIDIA is not seen on the options list either. The display resolution alone works ok. For one or another reason the Gnome Control Center screen resolution tool tells the refresh rate is only 50Hz. However; Desktop Effects tells the graphic card is not supported by Xgl, and SaX2 tells that 3D acceleration is not supported and cannot be activated because the card/driver doesn't support 3D. See the attached screenshot. The corresponding and similar problem arise also on openSUSE and SLED10SP1. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 297234] New: Java applets do not work with Mozilla-Firefox
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=297234 Summary: Java applets do not work with Mozilla-Firefox Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Java AssignedTo: dbornkessel(a)novell.com ReportedBy: pnemec(a)novell.com QAContact: qa(a)suse.de Found By: --- MozillaFirefox-2.0.0.6-2.1 rpm -qa | grep java java-1_4_2-gcj-compat-32bit-1.4.2.0-66 java-1_4_2-sun-1.4.2_update13-3.1 java-1_5_0-sun-devel-1.5.0_update12-3.1 gcc-java-4.1.3-29 java-1_5_0-sun-1.5.0_update12-3.1 java-1_5_0-sun-alsa-1.5.0_update12-3.1 java-1_4_2-gcj-compat-1.4.2.0-66 java-1_5_0-sun-src-1.5.0_update12-3.1 gcc41-java-4.1.2_20061115-5 java-1_5_0-sun-plugin-1.5.0_update12-3.1 kdebindings3-javascript-3.5.7-24.7 java-1_5_0-sun-demo-1.5.0_update12-3.1 First i realise that there is no java plugin installed. I do not understand why pluggn for browser is not in standard java ...huh. Anyway, i success to install right package. Problem is that Firefox still not going to load applet. When i started firefox from konsole i get: (firefox-bin:7608): Gtk-WARNING **: Nemohu nalézt knihovnu pro témata v module_path: "xfce", Exec of "/usr/lib/jvm/java-1.5.0-sun-1.5.0_update12/jre/bin/java_vm" failed: not file or directory ** (Gecko:7633): WARNING **: Serious fd usage error 42 ** (Gecko:7633): WARNING **: Serious fd usage error 40 Could not read ack from child process Plugin: Java VM process has died. plugin: java process exited with status 6 Could not start JavaVM! VM did not start up properly Exec of "/usr/lib/jvm/java-1.5.0-sun-1.5.0_update12/jre/bin/java_vm" failed: not a file or directory ** (Gecko:7634): WARNING **: Serious fd usage error 42 ** (Gecko:7634): WARNING **: Serious fd usage error 40 Could not read ack from child process Plugin: Java VM process has died. plugin: java process exited with status 6 Could not start JavaVM! VM did not start up properly Exec of "/usr/lib/jvm/java-1.5.0-sun-1.5.0_update12/jre/bin/java_vm" failed: není souborem ani adresářem ** (Gecko:7635): WARNING **: Serious fd usage error 42 ** (Gecko:7635): WARNING **: Serious fd usage error 40 Could not read ack from child process Plugin: Java VM process has died. plugin: java process exited with status 6 Could not start JavaVM! VM did not start up properly Exec of "/usr/lib/jvm/java-1.5.0-sun-1.5.0_update12/jre/bin/java_vm" failed: not a file or directory ** (Gecko:7636): WARNING **: Serious fd usage error 42 ** (Gecko:7636): WARNING **: Serious fd usage error 40 Could not read ack from child process Plugin: Java VM process has died. plugin: java process exited with status 6 Could not start JavaVM! VM did not start up properly Konqueror work great. (except Konqueror ignore java security stuff) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 386558] New: KDE Beta2 stuck in KIWI CD Boot-System...
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=386558 Summary: KDE Beta2 stuck in KIWI CD Boot-System... Product: openSUSE 11.0 Version: Beta 2 Platform: x86 OS/Version: OS/2 Status: NEW Severity: Blocker Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fzf7a2c02(a)sneakemail.com QAContact: qa(a)suse.de Found By: --- The KDE version of the 11.0 Beta2 gets stuck after loading the kernel with default values after probing the modules in console F2: sata_sil, sata_via, pata_amdehci-hcd, uhci-hcd, ohci-hcd. Then the next line reads: "Drive not ready yet... waiting" This repeats 6 more times and then it says: "Couldn't find CD image configuration file. reboot Exception: error consoles F3/F4. reboot Exception: Reboot in 120s..." In console F3 it repeatedly says: + for i in '$cddev' + mount /dev/sr1 /cdrom mount: you must specify the filesystem type + '[' -f /cdrom/config.isoclient ']' + umount /dev/sr1 umount: /dev/sr1: not mounted -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 343291] New: Touchpad and keyboard are not detected in Lenovo Y500
by bugzilla_noreply＠novell.com 05 May '08

05 May '08

https://bugzilla.novell.com/show_bug.cgi?id=343291 Summary: Touchpad and keyboard are not detected in Lenovo Y500 Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Blocker Priority: P5 - None Component: Mobile Devices AssignedTo: behlert(a)novell.com ReportedBy: gaganpreet.arora(a)gmail.com QAContact: qa(a)suse.de Found By: --- Created an attachment (id=184214) --> (https://bugzilla.novell.com/attachment.cgi?id=184214) sax log called with sax2 -r -m 0=nvidia I installed 10.3 final on my Lenovo Y500. The touchpad and keyboard were not detected during installation. I installed it using an USB keyboard, hoping it might work later. But still it isn't working. It was working fine in 10.2 though. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12