https://bugzilla.novell.com/show_bug.cgi?id=386005 Summary: Promise TX4310 and RAID doesn't show logical disk Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Blocker Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: info@mg-informatica.it QAContact: kernel-maintainers@forge.provo.novell.com Found By: Other Hi, the first time i start opensuse 10.3 install with the raid card and the system doesn't recognize the TX4310 Promise card. So i've remove the card and install opensuse 10.3. I've update all system, now the kernel is 2.6.22.17-0.1-default i686. I've insert the TX4310 Promise card and in the boot sequence i see that the card is recognize with kernel driver sata_promise. I've reboot and connect 4 hard drive x 320GB. I've configure RAID 5 in card bios. Now after have it recognize the card show many error on the boot: <6>scsi2 : sata_promise <6>scsi3 : sata_promise <6>scsi4 : sata_promise <6>scsi5 : sata_promise <6>ata3: SATA max UDMA/133 cmd 0xf881a200 ctl 0xf881a238 bmdma 0x00000000 irq 16 <6>ata4: SATA max UDMA/133 cmd 0xf881a280 ctl 0xf881a2b8 bmdma 0x00000000 irq 16 <6>ata5: SATA max UDMA/133 cmd 0xf881a300 ctl 0xf881a338 bmdma 0x00000000 irq 16 <6>ata6: SATA max UDMA/133 cmd 0xf881a380 ctl 0xf881a3b8 bmdma 0x00000000 irq 16 <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <6>ata3: EH pending after completion, repeating EH (cnt=4) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <6>ata3: EH pending after completion, repeating EH (cnt=3) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <6>ata3: EH pending after completion, repeating EH (cnt=2) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <6>ata3: EH pending after completion, repeating EH (cnt=1) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3: limiting SATA link speed to 1.5 Gbps <4>ata3.00: limiting speed to UDMA7:PIO5 <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <4>ata3.00: failed to read native max address (err_mask=0x100) <3>ata3.00: revalidation failed (errno=-5) <4>ata3.00: disabled <3>ata3: EH pending after 5 tries, giving up <6>ata3: EH complete <6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <3>ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen <3>ata3: hotplug_status 0x11 <6>ata3: hard resetting link <4>ata4.00: failed to read native max address (err_mask=0x100) <4>ata4: failed to recover some devices, retrying in 5 secs <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata3.00: failed to read native max address (err_mask=0x100) <4>ata3: failed to recover some devices, retrying in 5 secs <6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata4.00: failed to read native max address (err_mask=0x100) <3>ata4.00: revalidation failed (errno=-5) <4>ata4: limiting SATA link speed to 1.5 Gbps <4>ata4.00: limiting speed to UDMA7:PIO5 <4>ata4: failed to recover some devices, retrying in 5 secs <6>ata3: hard resetting link .................. continue So the RAID disk is not visible and i can' use it. There is some patch? Thank you. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.