March 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 276989] New: ltrace doesn't trace calls made by libraries
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=276989 Summary: ltrace doesn't trace calls made by libraries Product: openSUSE 10.3 Version: Alpha 4 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Development AssignedTo: olh(a)novell.com ReportedBy: max(a)novell.com QAContact: qa(a)suse.de When I try to ltrace /usr/bin/wish, which only contains a few calls into libtcl and libtk, only those calls are printed, but not the calls libtcl and libtk make into other libraries, such as libc and libX11. In comparison, when I ltrace a wish executable that has been linked statically against libtcl and libtk, I get almost 13MB of ltrace output from a wish that starts up and exits immediately. I've experienced this on a 10.2-x86_64 installation with ltrace and ltrace32 from 10.2 and 10.3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3

[Bug 374309] New: EFIKA freezes during installation
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=374309 Summary: EFIKA freezes during installation Product: openSUSE 11.0 Version: Factory Platform: PowerPC OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pczanik(a)genesi-usa.com QAContact: jsrain(a)novell.com Found By: --- With latest factory (2008-03-26), EFIKA PPC freezes during installation. It does not respond to keyboard or VNC any more. When tail -f /var/log/YaST2/y2logs, the last two lines are: Initrd.ycp:249 Module pata_mpc52xx from initial list added to initrd, now contains ["pata_mpc52xx"] StorageControllers.ycp:596 Initialize postinstall_info [] -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 30

[Bug 332691] New: knetworkmanager: more options for openvpn connections ( route)
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=332691 Summary: knetworkmanager: more options for openvpn connections (route) Product: openSUSE 10.3 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: qa(a)suse.de Found By: --- I cannot make one openvpn connection working. I suspect it is problem with route entries in my original script in openvpn. I don't see any such option in KNM. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 265784] New: knetworkmanager: improve readability of systray icons (minor)
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=265784 Summary: knetworkmanager: improve readability of systray icons (minor) Product: openSUSE 10.2 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: qa(a)suse.de I wear glasses plus I use hires (14" with 1400x1050) so maybe that's just me, but on the other hand all other icons (kget, kwifimanager, kwallet) are crystal clear for me. For wifi connected status I would suggest just other colors, and _not shaded_. It is too much, really. Take a look at kwifimanager -- its icon is much more readable (i.e. it presents desired readability). Cable connected -- the icon is a bit too cryptic, the icon size is limited so when you try to put rotated image of the plug, what do you get? Only few pixels to draw image. The same goes for disconnected icons. For two latter ones, please compare it to KGet download list -- it has pretty useful icons for that purpose. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 9

[Bug 307015] New: knetworkmanager: show "permanent" dialog when there is no connection after start
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=307015 Summary: knetworkmanager: show "permanent" dialog when there is no connection after start Product: openSUSE 10.2 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: qa(a)suse.de Found By: --- One of possible typical scenarios: you come to work, you enter your room, turn on computer, go get some tea/coffee, you get back, you check new mail... error, strange, you check KMail, wait a sec, you check KNM --> not connected. In such and only such case, when the computer connects _initially_ to already known network please show "permanent" info/warning dialog. Currently I cannot say if KNM shows anything but those info dialogs closes after some time or does not display anything at all. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 337384] New: add kernel-rt sources package to repo
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=337384 Summary: add kernel-rt sources package to repo Product: openSUSE 10.3 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: qa(a)suse.de Found By: --- There is kernel-rt (thank you for that) but strange -- there is no companion packages with sources. Package with headers only would be great too. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 246966] New: no automatic reconnect to network
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=246966 Summary: no automatic reconnect to network Product: openSUSE 10.3 Version: Alpha 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: aj(a)novell.com QAContact: qa(a)suse.de CC: thoenig(a)novell.com With Alpha1 automatic reconnect does not work after suspend. How to reproduce: * Laptop uses e1000 ethernet network connection * suspend to ram * resume I run nm-tool, it outputs: State: disconnected Device: eth0 ... Capabilities: ... Carrier Detect: yes ... Wired settings: Hardware Link: yes The ethernet led is blinking. If I select now in knetworkmanager manually "Wired network", nm connects to ethernet and it works fine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 28

[Bug 289260] New: update to a glibc without cputuned libs fails
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=289260 Summary: update to a glibc without cputuned libs fails Product: openSUSE 10.3 Version: Alpha 5 Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Update Problems AssignedTo: pbaudis(a)novell.com ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com CC: power-bugs(a)forge.provo.novell.com Found By: --- updating from 10.2 to 10.3 fails on a 64bit system because the cputuned libraries are not compiled anymore. The new linker still finds the old libs during %post. A possible solution is either to reenable the lib building and waste some build power. Or remove the incompatible libs like it is already done for the tls update. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 331255] New: mounting of _netdev devices not available
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=331255 Summary: mounting of _netdev devices not available Product: SUSE Linux 10.1 Version: Final Platform: All OS/Version: SLES 10 Status: NEW Severity: Normal Priority: P5 - None Component: Usability AssignedTo: siegfried.olschner(a)novell.com ReportedBy: brian(a)clusterfs.com QAContact: siegfried.olschner(a)novell.com Found By: Third Party Developer/Partner In other Linux distributions, and I believe in prior SUSE distributions, there is an initscript that is responsible for mounting filesystems that depend on network connectivity. The fallback standard example of this is of course NFS. SUSE 10 seems to support mounting NFS through the (/etc/init.d/)"nfs" initscript in which it specifically mounts NFS filesystems (only). However that leaves other network dependent filesystems such as ours, Lustre, out in the cold. If we use an fstab entry for a Lustre filesystem with an option of "_netdev" specified, there seems to be nothing in the boot process to actually mount this. Simply giving Lustre filesystems the "_netdev" mount option in /etc/fstab works in a number of other Linux distributions, just not SLES. Why have you removed this _netdev mounting option from the initscripts? How do you propose that network filesystems are mounted given this limitation? Is each network filesystem vendor supposed to create an initscript for use on SUSE (only -- as other distros don't need this support)? Your input is greatly appreciated. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 282154] New: autobuild scripts get confused if 'Name:' specified more than once in a .spec file
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=282154 Summary: autobuild scripts get confused if 'Name:' specified more than once in a .spec file Product: openSUSE 10.3 Version: Alpha 4plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: wberrier(a)novell.com QAContact: qa(a)suse.de (Not sure where to file a bug like this) I'm submitting a package that I use in the build service to autobuild. But autobuild's scripts (build and submitpac) get confused as to what the name of my package is. From apache2-mod_mono: %if 0%{?fedora_version} Name: mod_mono %else Name: apache2-mod_mono %endif This works fine in the build service, but I'm not able to 'build' unless I specify apache2-mod_mono first, but I'm never able to 'submitpac', because mod_mono.changes doesn't exist. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4