January 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 293806] New: no DMAPI support in XFS
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=293806 Summary: no DMAPI support in XFS Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: Joachim.Reichelt(a)helmholtz-hzi.de QAContact: qa(a)suse.de Found By: Beta-Customer I want to mount a drive using in fstab: /dev/sdb1 /galaxy xfs rw,noauto,dmapi,mtpt=/galaxy 0 0 dmesg: SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS: unknown mount option [dmapi]. We need DMAPI for oure migration system to get old files from the disk to the background server -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 341537] New: via velocity: if MTU > 1500 is used, at boot, ifup sigsegs and entire boot halts
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=341537#c1 Summary: via velocity: if MTU > 1500 is used, at boot, ifup sigsegs and entire boot halts Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa(a)suse.de Found By: Field Engineer I have a pair of VIA Velocity network cards. If I set their MTU > 1500 in /etc/sysconfig/ifcfg-eth0, upon reboot ifup sigsegs and the entire boot process halts. I have to boot into single user mode and edit the file (removing the MTU or setting it to ''). Kernel is the latest kernel for openSUSE 10.3 as of this writing Linux frank 2.6.22.12-0.1-default #1 SMP 2007/11/06 23:05:18 UTC i686 athlon i386 GNU/Linux and is unmodified, etc.. Happens 100% of the time. Since the VIA Velocity is a GiG-E NIC, using > 1500 MTU should be fairly common. NOTE: This has been a problem since openSUSE 10.2. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 327684] New: iwl4965: Connecting to WLAN via NetworkManager fails
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=327684 Summary: iwl4965: Connecting to WLAN via NetworkManager fails Product: openSUSE 10.3 Version: RC 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: stefan.bogner(a)novell.com QAContact: qa(a)suse.de Found By: --- On my ThinkPad t61p, connecting to Wireless LANs fails (most of the time). I have been able to connect to a wireless LAN once (last week in a Hotel). The available WLANs are shown correctly in KNetworkManager, connecting is not possible though. dmesg tells me: ADDRCONF(NETDEV_UP): wlan0: link is not ready -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 29

[Bug 351910] New: Fingerprint / screensaver integration
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=351910 Summary: Fingerprint / screensaver integration Product: openSUSE 11.0 Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: mboman(a)novell.com QAContact: qa(a)suse.de Found By: --- The should be a possibility to unlock the screensaver via fingerprint reader. I am pretty sure that we had this enabled at one stage but it is gone in 10.3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 342682] New: Mirror hosted by UOL lacks files.
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=342682 Summary: Mirror hosted by UOL lacks files. Product: openSUSE 10.3 Version: Final Platform: 64bit OS/Version: openSUSE 10.3 Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: paternot(a)snap.com.br QAContact: jsrain(a)novell.com Found By: --- >From time to time Yast complains about some files missing, during update/install. After some time I tracked it down to a problem with UOL's mirror. This error is reproductible, but may take some time. That'sbecause UOL uses load balancing, and some machines are OK. Keep hiting the "refresh" button, and the error will show up. The URLs I tested: http://mirrors.uol.com.br/pub/opensuse/distribution/10.3/repo/non-oss/ http://mirrors.uol.com.br/pub/opensuse/distribution/10.3/repo/oss/ http://mirrors.uol.com.br/pub/opensuse/update/10.3/ I know they are part of the official mirrors of Suse 10.3 - and that means a lot of brazilians must be getting the same problem. I got this exact behaviour in 4 machines and 2 different ISPs, so it's not an isolated problem. I will upload 2 screenshots to show the problem. One with the files, and another with an "error 404". Both where taken today, with less than a minute apart. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 346178] New: System crashes after launching Yast under Xen kernel
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=346178 Summary: System crashes after launching Yast under Xen kernel Product: openSUSE 10.3 Version: Final Platform: 32bit OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Xen AssignedTo: cgriffin(a)novell.com ReportedBy: laurent.henry(a)ehess.fr QAContact: qa(a)suse.de CC: laurent.henry(a)ehess.fr Found By: Other On a new installation of an Opensuse 10.3 (32 bits). While booting on the default-2.6.22.13-0.3 kernel, i can do normal usage of Yast. While booting with the xen-2.6.22.13-0.3 kernel, use of yast produces a complete crash of my system instantly (freezed, total loss of control, the system doesn't even answer to ping anymore). I have seen the error message before the crash: sbin/yast: line 386: 4075 Erreur de segmentation $ybindir/y2base menu ncurses $NCTHREADS After this I used apt-get update and apt-get dist-upgrade. Then i succeeded using yast once fine. Now, i still suffer the same crashes everitime i try to launch yast, but without the error message. ps: this is requalification of yesterday's bug i wrongly post (345866) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 309129] New: "a modern boot manager like LILO"
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=309129#c308994 Summary: "a modern boot manager like LILO" Product: openSUSE 10.3 Version: Beta 3 Platform: All OS/Version: openSUSE 10.3 Status: NEW Severity: Minor Priority: P5 - None Component: Translations AssignedTo: fehr(a)novell.com ReportedBy: ke(a)novell.com QAContact: ke(a)novell.com Depends on: 308994 Found By: Beta-Customer +++ This bug was initially created as a clone of Bug #308994 +++ [...] Also, where the German text states that "a modern boot manager like LILO" allows booting from an extended partition, it seems to imply that the default boot manager GRUB doesn't. This could be formulated more clearly, perhaps by simply adding "oder GRUB". [...] ============================================================================= Thomas, I'd like you to update the English string first (for 10.4 or later). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 349881] New: xen kernel crash after trying to umount a usb disk
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=349881 User reitenbach(a)rapideye.de added comment https://bugzilla.novell.com/show_bug.cgi?id=349881#c1 Summary: xen kernel crash after trying to umount a usb disk Product: openSUSE 10.3 Version: Final Platform: 64bit OS/Version: openSUSE 10.3 Status: NEW Severity: Critical Priority: P5 - None Component: Xen AssignedTo: cgriffin(a)novell.com ReportedBy: reitenbach(a)rapideye.de QAContact: qa(a)suse.de Found By: Customer I had mounted a usb disk, 500GB, and was copying data from it onto the local disk. some hours later, I tried to access the mounted disk, got an i/o error. Then I tried to umount the /usbdisk and it ended in a segmentation fault. Immediately after that the server became unresponsive. After reboot I found the following kernel crash dump in /var/log/messages: Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600008. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600009. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000a. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000b. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000c. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000d. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000e. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000f. Dec 19 18:21:14 xen1 kernel: sd 6:0:0:0: [sdd] Device not ready: <6>: Sense Key : Not Ready [current] Dec 19 18:21:14 xen1 kernel: : Add. Sense: Logical unit not ready, initializing command required Dec 19 18:21:14 xen1 kernel: end_request: I/O error, dev sdd, sector 6291527 Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600008. Dec 19 18:21:23 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:23 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:24 xen1 kernel: printk: 2 messages suppressed. Dec 19 18:21:24 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:29 xen1 kernel: printk: 1 messages suppressed. Dec 19 18:21:29 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:34 xen1 kernel: printk: 13 messages suppressed. Dec 19 18:21:34 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:51 xen1 kernel: general protection fault: 0000 [1] SMP Dec 19 18:21:51 xen1 kernel: last sysfs file: /devices/pci0000:00/0000:00:01.0/irq Dec 19 18:21:51 xen1 kernel: CPU 1 Dec 19 18:21:51 xen1 kernel: Modules linked in: nfsd exportfs lockd nfs_acl sunrpc nls_utf8 ntfs usb_storage af_packet netbk netloop blkbk blktap xenbus_be bridge 8021q iptable_filter ip_tables ip6_tables x_tables edd loop dm_round_robin dm_multipath dm_mod ch st osst sr_mod cdrom mptspi tg3 scsi_transport_spi sata_svw ata_generic pata_serverworks libata generic container k8temp thermal processor button hwmon r tc_cmos rtc_core rtc_lib shpchp pci_hotplug 8250_pnp 8250 serio_raw serverworks serial_core sg ide_core i2c_piix4 i2c_core ext3 jbd mbcach e sd_mod usbhid hid ff_memless mptsas mptscsih mptbase scsi_transport_sas scsi_mod ehci_hcd ohci_hcd usbcore xenblk xennet Dec 19 18:21:51 xen1 kernel: Pid: 11874, comm: umount Tainted: G N 2.6.22.13-0.3-xen #1 Dec 19 18:21:51 xen1 kernel: RIP: e030:[<ffffffff8029b758>] [<ffffffff8029b758>] sync_buffer+0x10/0x40 Dec 19 18:21:51 xen1 kernel: RSP: e02b:ffff88005d3c5c08 EFLAGS: 00010286 Dec 19 18:21:51 xen1 kernel: RAX: 9fa39e969285757b RBX: ffff880029268f68 RCX: ffff88005d3c5c80 Dec 19 18:21:51 xen1 kernel: RDX: ffffffffff5f9000 RSI: 0000000000000000 RDI: ffff880029268f68 Dec 19 18:21:51 xen1 kernel: RBP: ffff88005d3c5c58 R08: ffff88000316f118 R09: 0000000000000003 Dec 19 18:21:51 xen1 kernel: R10: 0000000000000000 R11: ffffffff8029c3d0 R12: ffff88000316f118 Dec 19 18:21:51 xen1 kernel: R13: ffff88005d3c5c68 R14: 0000000000000002 R15: ffffffff8029b748 Dec 19 18:21:51 xen1 kernel: FS: 00002b27b7fb7b00(0000) GS:ffffffff804dc080(0000) knlGS:0000000000000000 Dec 19 18:21:51 xen1 kernel: CS: e033 DS: 0000 ES: 0000 Dec 19 18:21:51 xen1 kernel: Process umount (pid: 11874, threadinfo ffff88005d3c4000, task ffff880000bc1040) Dec 19 18:21:51 xen1 kernel: Stack: ffff88000316f118 ffffffff803edb8e ffff88006fd4fb10 ffff880029268f68 Dec 19 18:21:51 xen1 kernel: ffff8800020b3398 0000000000000002 0000000000000002 ffffffff8029b748 Dec 19 18:21:51 xen1 kernel: 0000000000000000 ffffffff803edc2d ffff880029268f68 0000000000000002 Dec 19 18:21:51 xen1 kernel: Call Trace: Dec 19 18:21:51 xen1 kernel: [<ffffffff803edb8e>] __wait_on_bit_lock+0x3f/0x72 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff803edc2d>] out_of_line_wait_on_bit_lock+0x6c/0x78 Dec 19 18:21:51 xen1 kernel: [<ffffffff8023c2c4>] wake_bit_function+0x0/0x23 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029c437>] block_invalidatepage+0x67/0xc8 Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f65b>] truncate_complete_page+0x28/0x45 Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f70d>] truncate_inode_pages_range+0x95/0x294 Dec 19 18:21:51 xen1 kernel: [<ffffffff802122e3>] xen_send_IPI_mask+0x9c/0xf1 Dec 19 18:21:51 xen1 kernel: [<ffffffff8028dc37>] iput+0x42/0x7b Dec 19 18:21:51 xen1 kernel: [<ffffffff8028e844>] dispose_list+0x50/0xf7 Dec 19 18:21:51 xen1 kernel: [<ffffffff8028ed08>] invalidate_inodes+0xd5/0xf3 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d914>] generic_shutdown_super+0x39/0xf0 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d9d8>] kill_block_super+0xd/0x1e Dec 19 18:21:51 xen1 kernel: [<ffffffff8027daa3>] deactivate_super+0x6a/0x82 Dec 19 18:21:51 xen1 kernel: [<ffffffff80290df9>] sys_umount+0x249/0x25a Dec 19 18:21:51 xen1 kernel: [<ffffffff8026b102>] remove_vma+0x4c/0x53 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027ef3d>] sys_newstat+0x19/0x31 Dec 19 18:21:51 xen1 kernel: [<ffffffff802094c6>] system_call+0x86/0x8b Dec 19 18:21:51 xen1 kernel: [<ffffffff80209440>] system_call+0x0/0x8b Dec 19 18:21:51 xen1 kernel: Dec 19 18:21:51 xen1 kernel: Dec 19 18:21:51 xen1 kernel: Code: 48 8b 40 08 48 8b 80 08 01 00 00 48 85 c0 74 16 48 8b 78 68 Dec 19 18:21:51 xen1 kernel: RIP [<ffffffff8029b758>] sync_buffer+0x10/0x40 Dec 19 18:21:51 xen1 kernel: RSP <ffff88005d3c5c08> Dec 19 18:21:51 xen1 kernel: WARNING: at kernel/exit.c:872 do_exit() Dec 19 18:21:51 xen1 kernel: Dec 19 18:21:51 xen1 kernel: Call Trace: Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff8022c16b>] do_exit+0x51/0x870 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff8020a685>] kernel_math_error+0x0/0x71 Dec 19 18:21:51 xen1 kernel: [<ffffffff803ef6f7>] error_exit+0x0/0x79 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029c3d0>] block_invalidatepage+0x0/0xc8 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b758>] sync_buffer+0x10/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff803edb8e>] __wait_on_bit_lock+0x3f/0x72 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff803edc2d>] out_of_line_wait_on_bit_lock+0x6c/0x78 Dec 19 18:21:51 xen1 kernel: [<ffffffff8023c2c4>] wake_bit_function+0x0/0x23 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029c437>] block_invalidatepage+0x67/0xc8 Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f65b>] truncate_complete_page+0x28/0x45 Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f70d>] truncate_inode_pages_range+0x95/0x294 Dec 19 18:21:51 xen1 kernel: [<ffffffff802122e3>] xen_send_IPI_mask+0x9c/0xf1 Dec 19 18:21:51 xen1 kernel: [<ffffffff8028dc37>] iput+0x42/0x7b Dec 19 18:21:51 xen1 kernel: [<ffffffff8028e844>] dispose_list+0x50/0xf7 Dec 19 18:21:51 xen1 kernel: [<ffffffff8028ed08>] invalidate_inodes+0xd5/0xf3 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d914>] generic_shutdown_super+0x39/0xf0 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d9d8>] kill_block_super+0xd/0x1e Dec 19 18:21:51 xen1 kernel: [<ffffffff8027daa3>] deactivate_super+0x6a/0x82 Dec 19 18:21:51 xen1 kernel: [<ffffffff80290df9>] sys_umount+0x249/0x25a Dec 19 18:21:51 xen1 kernel: [<ffffffff8026b102>] remove_vma+0x4c/0x53 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027ef3d>] sys_newstat+0x19/0x31 Dec 19 18:35:52 xen1 syslog-ng[6970]: syslog-ng version 1.6.12 starting all available updates by today were installed, here a dmesg: Linux version 2.6.22.13-0.3-xen (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/11/19 15:02:58 UTC Command line: root=/dev/disk/by-id/scsi-3500000e01625dfd0-part2 vga=normal BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000007588f000 (usable) Entering add_active_range(0, 0, 481423) 0 entries of 256 used end_pfn_map = 481423 DMI present. Entering add_active_range(0, 0, 481423) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 481423 DMA32 481423 -> 481423 Normal 481423 -> 481423 early_node_map[1] active PFN ranges 0: 0 -> 481423 On node 0 totalpages: 481423 DMA zone: 6581 pages used for memmap DMA zone: 0 pages reserved DMA zone: 474842 pages, LIFO batch:31 DMA32 zone: 0 pages used for memmap Normal zone: 0 pages used for memmap ACPI: RSDP 000F8510, 0024 (r2 PTLTD ) ACPI: XSDT 7F762B1D, 006C (r1 PTLTD XSDT 6040000 LTP 0) ACPI: FACP 7F762B89, 0084 (r2 HP TREX 6040000 MSFT 2000001) ACPI: DSDT 7F762C0D, 3F8A (r1 HP TREX 6040000 MSFT 2000002) ACPI: FACS 7F76FFC0, 0040 ACPI: SPMI 7F766B97, 0040 (r5 HP TREX 6040000 PTL 1) ACPI: SSDT 7F766BD7, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) ACPI: SRAT 7F766DDD, 00A0 (r1 AMD HAMMER 6040000 AMD 1) ACPI: HPET 7F766E7D, 0038 (r1 BRCM EXPLOSN 6040000 BRCM 2000001) ACPI: SSDT 7F766EB5, 0049 (r1 PTLTD SSDT 6040000 AMD 2000001) ACPI: MCFG 7F766EFE, 003C (r1 PTLTD MCFG 6040000 AMD 2000001) ACPI: SPCR 7F766F3A, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) ACPI: APIC 7F766F8A, 0076 (r1 PTLTD APIC 6040000 LTP 0) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 3, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 4, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7f800000:7f400000) PERCPU: Allocating 24952 bytes of per cpu data Built 1 zonelists. Total pages: 474842 Kernel command line: root=/dev/disk/by-id/scsi-3500000e01625dfd0-part2 vga=normal Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2194.618 MHz processor. Console: colour VGA+ 80x50 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Software IO TLB enabled: Aperture: 2 megabytes Kernel range: ffff88000351d000 - ffff88000371d000 Address size: 25 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 1862912k/1925692k available (2007k kernel code, 53944k reserved, 918k data, 188k init) Calibrating delay using timer specific routine.. 4390.50 BogoMIPS (lpj=8781008) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code Unpacking initramfs... done Freeing initrd memory: 10571k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 715 Objects with 88 Devices 245 Methods 23 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 1 Objects with 0 Devices 1 Methods 0 Regions tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful SMP alternatives: switching to SMP code Brought up 2 CPUs Initializing CPU#1 migration_cost=499 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 3F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:......................................................................... Initialized 18/23 Regions 0/0 Fields 19/19 Buffers 36/39 Packages (733 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 0 _STA executions (examined 94 objects) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_.PPBX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4.NICB._PRT] ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKS] (IRQs 5 *7 11) ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 *5 7 11 12 14 15) ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 *5 7 11 12 14 15) ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 *11 12 14 15) ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 *5 7 11 12 14 15) ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 *11 12 14 15) ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 pnp: 00:00: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:08: ioport range 0x40b-0x40b has been reserved pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:08: ioport range 0x500-0x560 has been reserved pnp: 00:08: ioport range 0x558-0x55b has been reserved PCI: Bridge: 0000:01:0d.0 IO window: 3000-3fff MEM window: dfc00000-dfcfffff PREFETCH window: 80000000-801fffff PCI: Bridge: 0000:00:01.0 IO window: 2000-3fff Time: xen clocksource has been installed. MEM window: dfc00000-dfdfffff PREFETCH window: 80000000-802fffff PCI: Bridge: 0000:03:00.0 IO window: 4000-4fff MEM window: dfa00000-dfafffff PREFETCH window: 80300000-803fffff PCI: Bridge: 0000:00:06.0 IO window: 4000-4fff MEM window: dfa00000-dfbfffff PREFETCH window: 80300000-803fffff PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:08.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: disabled. PCI: Bridge: 0000:08:00.0 IO window: disabled. MEM window: dfe00000-dfefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: dfe00000-dfefffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:03:00.0 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:08.0 to 64 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:09.0 to 64 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:0a.0 to 64 PCI: Setting latency timer of device 0000:08:00.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1198085568.932:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:04.0 PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] PCI: Setting latency timer of device 0000:00:08.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:08.0:pcie00] PCI: Setting latency timer of device 0000:00:09.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:09.0:pcie00] PCI: Setting latency timer of device 0000:00:0a.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0a.0:pcie00] Real Time Clock Driver v1.12ac hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.2 Event-channel device installed. PNP: PS/2 Controller [PNP0303:Z000] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 1 Freeing unused kernel memory: 188k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub SCSI subsystem initialized usbcore: registered new device driver usb Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SAS Host driver 3.04.05 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16 mptbase: Initiating ioc0 bringup ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 10, io mem 0xdff05000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.13-0.3-xen ohci_hcd usb usb1: SerialNumber: 0000:00:03.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 10, io mem 0xdff06000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22.13-0.3-xen ohci_hcd usb usb2: SerialNumber: 0000:00:03.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:03.2: irq 10, io mem 0xdff07000 ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.22.13-0.3-xen ehci_hcd usb usb3: SerialNumber: 0000:00:03.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ioc0: SAS1068: Capabilities={Initiator} usb 3-3: new high speed USB device using ehci_hcd and address 2 usb 3-3: new device found, idVendor=04cc, idProduct=1520 usb 3-3: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-3: configuration #1 chosen from 1 choice hub 3-3:1.0: USB hub found hub 3-3:1.0: 3 ports detected usb 2-2: new full speed USB device using ohci_hcd and address 2 usb 2-2: new device found, idVendor=0000, idProduct=0000 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: SE USB Device usb 2-2: Manufacturer: ServerEngines usb 2-2: SerialNumber: 4004F4854360B4 usb 2-2: configuration #1 chosen from 1 choice scsi0 : ioc0: LSISAS1068, FwRev=01102100h, Ports=1, MaxQ=511, IRQ=16 scsi 0:0:0:0: Direct-Access HP DF072A9844 HPD0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 143374738 512-byte hardware sectors (73408 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:0:0:0: [sda] 143374738 512-byte hardware sectors (73408 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sda:<6>usbcore: registered new interface driver hiddev sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk input: ServerEngines SE USB Device as /class/input/input1 input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:03.1-2 input: ServerEngines SE USB Device as /class/input/input2 input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:03.1-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:04 failed with error -16 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A piix4_smbus 0000:00:02.0: Found 0000:00:02.0 device SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1 SvrWks HT1000: chipset revision 0 SvrWks HT1000: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... libata version 3.00 loaded. Fusion MPT SPI Host driver 3.04.05 ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 32 (level, low) -> IRQ 32 mptbase: Initiating ioc1 bringup sata_svw 0000:01:0e.0: version 2.2 ACPI: PCI Interrupt Link [LNKS] enabled at IRQ 11 ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [LNKS] -> GSI 11 (level, low) -> IRQ 11 scsi1 : sata_svw scsi2 : sata_svw scsi3 : sata_svw scsi4 : sata_svw ata1: SATA max UDMA/133 cmd 0xffffc20000030000 ctl 0xffffc20000030020 bmdma 0xffffc20000030030 irq 11 ata2: SATA max UDMA/133 cmd 0xffffc20000030100 ctl 0xffffc20000030120 bmdma 0xffffc20000030130 irq 11 ata3: SATA max UDMA/133 cmd 0xffffc20000030200 ctl 0xffffc20000030220 bmdma 0xffffc20000030230 irq 11 ata4: SATA max UDMA/133 cmd 0xffffc20000030300 ctl 0xffffc20000030320 bmdma 0xffffc20000030330 irq 11 ata1: SATA link down (SStatus 4 SControl 300) ioc1: 53C1030: Capabilities={Initiator,Target} ata2: SATA link down (SStatus 4 SControl 300) scsi5 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=32 ata3: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) scsi 5:0:0:0: Direct-Access transtec T5016R 0001 PQ: 0 ANSI: 3 target5:0:0: Beginning Domain Validation target5:0:0: Domain Validation skipping write tests target5:0:0: Ending Domain Validation target5:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) sd 5:0:0:0: [sdb] 3515580416 512-byte hardware sectors (1799977 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: ad 00 00 08 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdb] 3515580416 512-byte hardware sectors (1799977 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: ad 00 00 08 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 > sdb: p7 exceeds device capacity sd 5:0:0:0: [sdb] Attached SCSI disk sd 5:0:0:0: Attached scsi generic sg1 type 0 scsi: host 5 channel 0 id 0 lun 0x00000200080c0400 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0xff010000ffffffff has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x00028080000a0000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun33554435 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 0 lun772 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 0 lun 0x0005008002000001 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x0006001440000000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x040703462e800000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x0009000015220000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x070a001130000000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x000bffff080c0400 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0xff0c0000ffffffff has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun168165389 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 0 lun 0x000e0c16c0000080 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x000f00000000d18b has a LUN larger than currently supported. scsi 5:0:1:0: Direct-Access transtec T5016R 0001 PQ: 0 ANSI: 3 target5:0:1: Beginning Domain Validation target5:0:1: Domain Validation skipping write tests target5:0:1: Ending Domain Validation target5:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) sd 5:0:1:0: [sdc] 3515580416 512-byte hardware sectors (1799977 MB) sd 5:0:1:0: [sdc] Write Protect is off sd 5:0:1:0: [sdc] Mode Sense: ad 00 00 08 sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:1:0: [sdc] 3515580416 512-byte hardware sectors (1799977 MB) sd 5:0:1:0: [sdc] Write Protect is off sd 5:0:1:0: [sdc] Mode Sense: ad 00 00 08 sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 5:0:1:0: [sdc] Attached SCSI disk sd 5:0:1:0: Attached scsi generic sg2 type 0 scsi: host 5 channel 0 id 1 lun 0x00000200080c0400 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0xff010000ffffffff has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x00028080000a0000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun33554435 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 1 lun772 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 1 lun 0x0005008002000001 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x0006001440000000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x040703462e800000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x0009000015220000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x070a001130000000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x000bffff080c0400 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0xff0c0000ffffffff has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun168165389 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 1 lun 0x000e0c16c0000080 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x000f00000000d18b has a LUN larger than currently supported. tg3.c:v3.77 (May 31, 2007) ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 36 (level, low) -> IRQ 36 eth0: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:86:fa:2e eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76148000] dma_mask[40-bit] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 36 (level, low) -> IRQ 36 eth1: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:87:4e:9d eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76148000] dma_mask[40-bit] attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160746, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160748, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160750, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160752, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160794, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160796, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160798, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160800, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 Adding 4474060k swap on /dev/sda1. Priority:-1 extents:1 across:4474060k osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ st: Version 20070203, fixed bufsize 32768, s/g segs 256 SCSI Media Changer driver v0.25 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel(a)redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: table: 253:1: multipath: error getting device device-mapper: ioctl: error adding target to table attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160794, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160796, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160798, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160800, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160794, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160796, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160798, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160800, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 loop: module loaded BIOS EDD facility v0.16 2004-Jun-25, 3 devices found attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 printk: 35 messages suppressed. Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160746, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160748, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160750, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160752, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160794, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160796, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160798, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160800, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2b00000, writing 2b00146) ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team PM: Writing back config space on device 0000:09:04.1 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:09:04.1 at offset 1 (was 2b00000, writing 2b00146) tg3: eth1: Link is up at 100 Mbps, full duplex. tg3: eth1: Flow control is off for TX and off for RX. 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com> All bugs added by David S. Miller <davem(a)redhat.com> vlan9: add 01:00:5e:00:00:01 mcast address to master interface vlan8: add 01:00:5e:00:00:01 mcast address to master interface vlan7: add 01:00:5e:00:00:01 mcast address to master interface vlan6: add 01:00:5e:00:00:01 mcast address to master interface vlan5: add 01:00:5e:00:00:01 mcast address to master interface vlan4: add 01:00:5e:00:00:01 mcast address to master interface vlan3: add 01:00:5e:00:00:01 mcast address to master interface vlan12: add 01:00:5e:00:00:01 mcast address to master interface Bridge firewalling registered vlan9: dev_set_promiscuity(master, 1) device eth1 entered promiscuous mode audit(1198085626.112:2): dev=eth1 prom=256 old_prom=0 auid=4294967295 device vlan9 entered promiscuous mode audit(1198085626.112:3): dev=vlan9 prom=256 old_prom=0 auid=4294967295 bridge9: port 1(vlan9) entering learning state bridge9: topology change detected, propagating bridge9: port 1(vlan9) entering forwarding state vlan8: dev_set_promiscuity(master, 1) device vlan8 entered promiscuous mode audit(1198085641.745:4): dev=vlan8 prom=256 old_prom=0 auid=4294967295 bridge8: port 1(vlan8) entering learning state bridge8: topology change detected, propagating bridge8: port 1(vlan8) entering forwarding state vlan7: dev_set_promiscuity(master, 1) device vlan7 entered promiscuous mode audit(1198085657.386:5): dev=vlan7 prom=256 old_prom=0 auid=4294967295 bridge7: port 1(vlan7) entering learning state bridge7: topology change detected, propagating bridge7: port 1(vlan7) entering forwarding state vlan6: dev_set_promiscuity(master, 1) device vlan6 entered promiscuous mode audit(1198085673.043:6): dev=vlan6 prom=256 old_prom=0 auid=4294967295 bridge6: port 1(vlan6) entering learning state bridge6: topology change detected, propagating bridge6: port 1(vlan6) entering forwarding state vlan5: dev_set_promiscuity(master, 1) device vlan5 entered promiscuous mode audit(1198085688.672:7): dev=vlan5 prom=256 old_prom=0 auid=4294967295 bridge5: port 1(vlan5) entering learning state bridge5: topology change detected, propagating bridge5: port 1(vlan5) entering forwarding state vlan4: dev_set_promiscuity(master, 1) device vlan4 entered promiscuous mode audit(1198085704.321:8): dev=vlan4 prom=256 old_prom=0 auid=4294967295 bridge4: port 1(vlan4) entering learning state bridge4: topology change detected, propagating bridge4: port 1(vlan4) entering forwarding state vlan3: dev_set_promiscuity(master, 1) device vlan3 entered promiscuous mode audit(1198085719.970:9): dev=vlan3 prom=256 old_prom=0 auid=4294967295 bridge3: port 1(vlan3) entering learning state bridge3: topology change detected, propagating bridge3: port 1(vlan3) entering forwarding state vlan12: dev_set_promiscuity(master, 1) device vlan12 entered promiscuous mode audit(1198085735.634:10): dev=vlan12 prom=256 old_prom=0 auid=4294967295 bridge12: port 1(vlan12) entering learning state bridge12: topology change detected, propagating bridge12: port 1(vlan12) entering forwarding state bridge0: starting userspace STP failed, staring kernel STP bridge0: port 1(eth1) entering listening state Setting mem allocation to 1917500 kiB Setting mem allocation to 1917500 kiB PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2b00000, writing 2b00146) eth0 renamed to peth0 veth0 renamed to eth0 NET: Registered protocol family 17 device vif0.0 entered promiscuous mode audit(1198085757.308:11): dev=vif0.0 prom=256 old_prom=0 auid=4294967295 xenbr0: port 1(vif0.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 1(vif0.0) entering forwarding state PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2b00000, writing 2b00146) bridge0: port 1(eth1) entering learning state device peth0 entered promiscuous mode audit(1198085767.496:12): dev=peth0 prom=256 old_prom=0 auid=4294967295 bridge0: port 1(eth1) entering forwarding state usb 3-1: new high speed USB device using ehci_hcd and address 4 usb 3-1: new device found, idVendor=0bc2, idProduct=3000 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: FreeAgentDesktop usb 3-1: Manufacturer: Seagate usb 3-1: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 6:0:0:0: Direct-Access Seagate FreeAgentDesktop 100D PQ: 0 ANSI: 4 sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 1c 00 00 00 sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 1c 00 00 00 sd 6:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 6:0:0:0: [sdd] Attached SCSI disk sd 6:0:0:0: Attached scsi generic sg3 type 0 usb-storage: device scan complete NTFS driver 2.1.28 [Flags: R/W MODULE]. NTFS volume version 3.1. printk: 28 messages suppressed. NTFS-fs error (device sdd1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows. (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 6295 to 6937 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 7150 and revoked 0/0 blocks kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. JBD: barrier-based sync failed on dm-1 - disabling barriers Installing knfsd (copyright (C) 1996 okir(a)monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 printk: 12 messages suppressed. Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:04:08.0 PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:04:08.0 PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:04:08.0 ... houndrets and thousands of lines of that are following... xen1:/var/log # uname -a Linux xen1 2.6.22.13-0.3-xen #1 SMP 2007/11/19 15:02:58 UTC x86_64 x86_64 x86_64 GNU/Linux xen1:/var/log # rpm -qa | grep xen xen-3.1.0_15042-51 xen-tools-3.1.0_15042-51 xen-libs-3.1.0_15042-51 kernel-xen-2.6.22.13-0.3 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 349895] New: Plain domU kernel cannot be compiled on/ for x86-64 systems
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=349895 Summary: Plain domU kernel cannot be compiled on/for x86-64 systems Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: nice(a)titanic.nyme.hu QAContact: qa(a)suse.de Found By: Other If I try to compile a plain domU kernel (i.e. the CONFIG_XEN_PRIVILEGED_GUEST option is unset) on/for an x86-64 Linux, then the kernel compiling ends with the following error: CC arch/x86_64/kernel/genapic-xen.o arch/x86_64/kernel/genapic-xen.c:28: error: ‘BAD_APICID’ undeclared here (not in a function) arch/x86_64/kernel/genapic-xen.c: In function ‘send_IPI_self’: arch/x86_64/kernel/genapic-xen.c:82: error: ‘APIC_DEST_SELF’ undeclared (first use in this function) arch/x86_64/kernel/genapic-xen.c:82: error: (Each undeclared identifier is reported only once arch/x86_64/kernel/genapic-xen.c:82: error: for each function it appears in) make[1]: *** [arch/x86_64/kernel/genapic-xen.o] Error 1 make: *** [arch/x86_64/kernel] Error 2 Plain domU kernels can be compiled for 32bit systems. My kernel source version is linux-2.6.22.13-0.3, but the previous poenSUSE 10.3 kernel had this bug too. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 348212] New: Opening this ppt file instantly crashes OOo
by bugzilla_noreply＠novell.com 07 Jan '08

07 Jan '08

https://bugzilla.novell.com/show_bug.cgi?id=348212 Summary: Opening this ppt file instantly crashes OOo Product: openSUSE 10.3 Version: Final Platform: x86 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: OpenOffice.org AssignedTo: eward(a)novell.com ReportedBy: crispin(a)crispincowan.com QAContact: qa(a)suse.de Found By: Customer Created an attachment (id=187306) --> (https://bugzilla.novell.com/attachment.cgi?id=187306) A PowerPoint ppt file that crashes OOo I was browsing the web, and found this ppt file that instantly crashes OOo. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8