https://bugzilla.novell.com/show_bug.cgi?id=349881 User reitenbach@rapideye.de added comment https://bugzilla.novell.com/show_bug.cgi?id=349881#c1 Summary: xen kernel crash after trying to umount a usb disk Product: openSUSE 10.3 Version: Final Platform: 64bit OS/Version: openSUSE 10.3 Status: NEW Severity: Critical Priority: P5 - None Component: Xen AssignedTo: cgriffin@novell.com ReportedBy: reitenbach@rapideye.de QAContact: qa@suse.de Found By: Customer I had mounted a usb disk, 500GB, and was copying data from it onto the local disk. some hours later, I tried to access the mounted disk, got an i/o error. Then I tried to umount the /usbdisk and it ended in a segmentation fault. Immediately after that the server became unresponsive. After reboot I found the following kernel crash dump in /var/log/messages: Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600008. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600009. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000a. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000b. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000c. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000d. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000e. Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000f. Dec 19 18:21:14 xen1 kernel: sd 6:0:0:0: [sdd] Device not ready: <6>: Sense Key : Not Ready [current] Dec 19 18:21:14 xen1 kernel: : Add. Sense: Logical unit not ready, initializing command required Dec 19 18:21:14 xen1 kernel: end_request: I/O error, dev sdd, sector 6291527 Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600008. Dec 19 18:21:23 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:23 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:24 xen1 kernel: printk: 2 messages suppressed. Dec 19 18:21:24 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:29 xen1 kernel: printk: 1 messages suppressed. Dec 19 18:21:29 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:34 xen1 kernel: printk: 13 messages suppressed. Dec 19 18:21:34 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record(): Failed with error code 5. Dec 19 18:21:51 xen1 kernel: general protection fault: 0000 [1] SMP Dec 19 18:21:51 xen1 kernel: last sysfs file: /devices/pci0000:00/0000:00:01.0/irq Dec 19 18:21:51 xen1 kernel: CPU 1 Dec 19 18:21:51 xen1 kernel: Modules linked in: nfsd exportfs lockd nfs_acl sunrpc nls_utf8 ntfs usb_storage af_packet netbk netloop blkbk blktap xenbus_be bridge 8021q iptable_filter ip_tables ip6_tables x_tables edd loop dm_round_robin dm_multipath dm_mod ch st osst sr_mod cdrom mptspi tg3 scsi_transport_spi sata_svw ata_generic pata_serverworks libata generic container k8temp thermal processor button hwmon r tc_cmos rtc_core rtc_lib shpchp pci_hotplug 8250_pnp 8250 serio_raw serverworks serial_core sg ide_core i2c_piix4 i2c_core ext3 jbd mbcach e sd_mod usbhid hid ff_memless mptsas mptscsih mptbase scsi_transport_sas scsi_mod ehci_hcd ohci_hcd usbcore xenblk xennet Dec 19 18:21:51 xen1 kernel: Pid: 11874, comm: umount Tainted: G N 2.6.22.13-0.3-xen #1 Dec 19 18:21:51 xen1 kernel: RIP: e030:[<ffffffff8029b758>] [<ffffffff8029b758>] sync_buffer+0x10/0x40 Dec 19 18:21:51 xen1 kernel: RSP: e02b:ffff88005d3c5c08 EFLAGS: 00010286 Dec 19 18:21:51 xen1 kernel: RAX: 9fa39e969285757b RBX: ffff880029268f68 RCX: ffff88005d3c5c80 Dec 19 18:21:51 xen1 kernel: RDX: ffffffffff5f9000 RSI: 0000000000000000 RDI: ffff880029268f68 Dec 19 18:21:51 xen1 kernel: RBP: ffff88005d3c5c58 R08: ffff88000316f118 R09: 0000000000000003 Dec 19 18:21:51 xen1 kernel: R10: 0000000000000000 R11: ffffffff8029c3d0 R12: ffff88000316f118 Dec 19 18:21:51 xen1 kernel: R13: ffff88005d3c5c68 R14: 0000000000000002 R15: ffffffff8029b748 Dec 19 18:21:51 xen1 kernel: FS: 00002b27b7fb7b00(0000) GS:ffffffff804dc080(0000) knlGS:0000000000000000 Dec 19 18:21:51 xen1 kernel: CS: e033 DS: 0000 ES: 0000 Dec 19 18:21:51 xen1 kernel: Process umount (pid: 11874, threadinfo ffff88005d3c4000, task ffff880000bc1040) Dec 19 18:21:51 xen1 kernel: Stack: ffff88000316f118 ffffffff803edb8e ffff88006fd4fb10 ffff880029268f68 Dec 19 18:21:51 xen1 kernel: ffff8800020b3398 0000000000000002 0000000000000002 ffffffff8029b748 Dec 19 18:21:51 xen1 kernel: 0000000000000000 ffffffff803edc2d ffff880029268f68 0000000000000002 Dec 19 18:21:51 xen1 kernel: Call Trace: Dec 19 18:21:51 xen1 kernel: [<ffffffff803edb8e>] __wait_on_bit_lock+0x3f/0x72 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff803edc2d>] out_of_line_wait_on_bit_lock+0x6c/0x78 Dec 19 18:21:51 xen1 kernel: [<ffffffff8023c2c4>] wake_bit_function+0x0/0x23 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029c437>] block_invalidatepage+0x67/0xc8 Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f65b>] truncate_complete_page+0x28/0x45 Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f70d>] truncate_inode_pages_range+0x95/0x294 Dec 19 18:21:51 xen1 kernel: [<ffffffff802122e3>] xen_send_IPI_mask+0x9c/0xf1 Dec 19 18:21:51 xen1 kernel: [<ffffffff8028dc37>] iput+0x42/0x7b Dec 19 18:21:51 xen1 kernel: [<ffffffff8028e844>] dispose_list+0x50/0xf7 Dec 19 18:21:51 xen1 kernel: [<ffffffff8028ed08>] invalidate_inodes+0xd5/0xf3 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d914>] generic_shutdown_super+0x39/0xf0 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d9d8>] kill_block_super+0xd/0x1e Dec 19 18:21:51 xen1 kernel: [<ffffffff8027daa3>] deactivate_super+0x6a/0x82 Dec 19 18:21:51 xen1 kernel: [<ffffffff80290df9>] sys_umount+0x249/0x25a Dec 19 18:21:51 xen1 kernel: [<ffffffff8026b102>] remove_vma+0x4c/0x53 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027ef3d>] sys_newstat+0x19/0x31 Dec 19 18:21:51 xen1 kernel: [<ffffffff802094c6>] system_call+0x86/0x8b Dec 19 18:21:51 xen1 kernel: [<ffffffff80209440>] system_call+0x0/0x8b Dec 19 18:21:51 xen1 kernel: Dec 19 18:21:51 xen1 kernel: Dec 19 18:21:51 xen1 kernel: Code: 48 8b 40 08 48 8b 80 08 01 00 00 48 85 c0 74 16 48 8b 78 68 Dec 19 18:21:51 xen1 kernel: RIP [<ffffffff8029b758>] sync_buffer+0x10/0x40 Dec 19 18:21:51 xen1 kernel: RSP <ffff88005d3c5c08> Dec 19 18:21:51 xen1 kernel: WARNING: at kernel/exit.c:872 do_exit() Dec 19 18:21:51 xen1 kernel: Dec 19 18:21:51 xen1 kernel: Call Trace: Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff8022c16b>] do_exit+0x51/0x870 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff8020a685>] kernel_math_error+0x0/0x71 Dec 19 18:21:51 xen1 kernel: [<ffffffff803ef6f7>] error_exit+0x0/0x79 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029c3d0>] block_invalidatepage+0x0/0xc8 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b758>] sync_buffer+0x10/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff803edb8e>] __wait_on_bit_lock+0x3f/0x72 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40 Dec 19 18:21:51 xen1 kernel: [<ffffffff803edc2d>] out_of_line_wait_on_bit_lock+0x6c/0x78 Dec 19 18:21:51 xen1 kernel: [<ffffffff8023c2c4>] wake_bit_function+0x0/0x23 Dec 19 18:21:51 xen1 kernel: [<ffffffff8029c437>] block_invalidatepage+0x67/0xc8 Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f65b>] truncate_complete_page+0x28/0x45 Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f70d>] truncate_inode_pages_range+0x95/0x294 Dec 19 18:21:51 xen1 kernel: [<ffffffff802122e3>] xen_send_IPI_mask+0x9c/0xf1 Dec 19 18:21:51 xen1 kernel: [<ffffffff8028dc37>] iput+0x42/0x7b Dec 19 18:21:51 xen1 kernel: [<ffffffff8028e844>] dispose_list+0x50/0xf7 Dec 19 18:21:51 xen1 kernel: [<ffffffff8028ed08>] invalidate_inodes+0xd5/0xf3 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d914>] generic_shutdown_super+0x39/0xf0 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d9d8>] kill_block_super+0xd/0x1e Dec 19 18:21:51 xen1 kernel: [<ffffffff8027daa3>] deactivate_super+0x6a/0x82 Dec 19 18:21:51 xen1 kernel: [<ffffffff80290df9>] sys_umount+0x249/0x25a Dec 19 18:21:51 xen1 kernel: [<ffffffff8026b102>] remove_vma+0x4c/0x53 Dec 19 18:21:51 xen1 kernel: [<ffffffff8027ef3d>] sys_newstat+0x19/0x31 Dec 19 18:35:52 xen1 syslog-ng[6970]: syslog-ng version 1.6.12 starting all available updates by today were installed, here a dmesg: Linux version 2.6.22.13-0.3-xen (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/11/19 15:02:58 UTC Command line: root=/dev/disk/by-id/scsi-3500000e01625dfd0-part2 vga=normal BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000007588f000 (usable) Entering add_active_range(0, 0, 481423) 0 entries of 256 used end_pfn_map = 481423 DMI present. Entering add_active_range(0, 0, 481423) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 481423 DMA32 481423 -> 481423 Normal 481423 -> 481423 early_node_map[1] active PFN ranges 0: 0 -> 481423 On node 0 totalpages: 481423 DMA zone: 6581 pages used for memmap DMA zone: 0 pages reserved DMA zone: 474842 pages, LIFO batch:31 DMA32 zone: 0 pages used for memmap Normal zone: 0 pages used for memmap ACPI: RSDP 000F8510, 0024 (r2 PTLTD ) ACPI: XSDT 7F762B1D, 006C (r1 PTLTD XSDT 6040000 LTP 0) ACPI: FACP 7F762B89, 0084 (r2 HP TREX 6040000 MSFT 2000001) ACPI: DSDT 7F762C0D, 3F8A (r1 HP TREX 6040000 MSFT 2000002) ACPI: FACS 7F76FFC0, 0040 ACPI: SPMI 7F766B97, 0040 (r5 HP TREX 6040000 PTL 1) ACPI: SSDT 7F766BD7, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) ACPI: SRAT 7F766DDD, 00A0 (r1 AMD HAMMER 6040000 AMD 1) ACPI: HPET 7F766E7D, 0038 (r1 BRCM EXPLOSN 6040000 BRCM 2000001) ACPI: SSDT 7F766EB5, 0049 (r1 PTLTD SSDT 6040000 AMD 2000001) ACPI: MCFG 7F766EFE, 003C (r1 PTLTD MCFG 6040000 AMD 2000001) ACPI: SPCR 7F766F3A, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) ACPI: APIC 7F766F8A, 0076 (r1 PTLTD APIC 6040000 LTP 0) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 3, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 4, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7f800000:7f400000) PERCPU: Allocating 24952 bytes of per cpu data Built 1 zonelists. Total pages: 474842 Kernel command line: root=/dev/disk/by-id/scsi-3500000e01625dfd0-part2 vga=normal Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2194.618 MHz processor. Console: colour VGA+ 80x50 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Software IO TLB enabled: Aperture: 2 megabytes Kernel range: ffff88000351d000 - ffff88000371d000 Address size: 25 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 1862912k/1925692k available (2007k kernel code, 53944k reserved, 918k data, 188k init) Calibrating delay using timer specific routine.. 4390.50 BogoMIPS (lpj=8781008) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code Unpacking initramfs... done Freeing initrd memory: 10571k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 715 Objects with 88 Devices 245 Methods 23 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 1 Objects with 0 Devices 1 Methods 0 Regions tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful SMP alternatives: switching to SMP code Brought up 2 CPUs Initializing CPU#1 migration_cost=499 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 3F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:......................................................................... Initialized 18/23 Regions 0/0 Fields 19/19 Buffers 36/39 Packages (733 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 0 _STA executions (examined 94 objects) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_.PPBX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4.NICB._PRT] ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKS] (IRQs 5 *7 11) ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 *5 7 11 12 14 15) ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 *5 7 11 12 14 15) ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 *11 12 14 15) ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 *5 7 11 12 14 15) ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 *11 12 14 15) ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 pnp: 00:00: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:08: ioport range 0x40b-0x40b has been reserved pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:08: ioport range 0x500-0x560 has been reserved pnp: 00:08: ioport range 0x558-0x55b has been reserved PCI: Bridge: 0000:01:0d.0 IO window: 3000-3fff MEM window: dfc00000-dfcfffff PREFETCH window: 80000000-801fffff PCI: Bridge: 0000:00:01.0 IO window: 2000-3fff Time: xen clocksource has been installed. MEM window: dfc00000-dfdfffff PREFETCH window: 80000000-802fffff PCI: Bridge: 0000:03:00.0 IO window: 4000-4fff MEM window: dfa00000-dfafffff PREFETCH window: 80300000-803fffff PCI: Bridge: 0000:00:06.0 IO window: 4000-4fff MEM window: dfa00000-dfbfffff PREFETCH window: 80300000-803fffff PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:08.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: disabled. PCI: Bridge: 0000:08:00.0 IO window: disabled. MEM window: dfe00000-dfefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: dfe00000-dfefffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:03:00.0 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:08.0 to 64 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:09.0 to 64 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 32 (level, low) -> IRQ 32 PCI: Setting latency timer of device 0000:00:0a.0 to 64 PCI: Setting latency timer of device 0000:08:00.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1198085568.932:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:04.0 PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] PCI: Setting latency timer of device 0000:00:08.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:08.0:pcie00] PCI: Setting latency timer of device 0000:00:09.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:09.0:pcie00] PCI: Setting latency timer of device 0000:00:0a.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0a.0:pcie00] Real Time Clock Driver v1.12ac hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.2 Event-channel device installed. PNP: PS/2 Controller [PNP0303:Z000] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 1 Freeing unused kernel memory: 188k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub SCSI subsystem initialized usbcore: registered new device driver usb Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SAS Host driver 3.04.05 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16 mptbase: Initiating ioc0 bringup ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 10, io mem 0xdff05000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.13-0.3-xen ohci_hcd usb usb1: SerialNumber: 0000:00:03.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 10, io mem 0xdff06000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22.13-0.3-xen ohci_hcd usb usb2: SerialNumber: 0000:00:03.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:03.2: irq 10, io mem 0xdff07000 ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.22.13-0.3-xen ehci_hcd usb usb3: SerialNumber: 0000:00:03.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ioc0: SAS1068: Capabilities={Initiator} usb 3-3: new high speed USB device using ehci_hcd and address 2 usb 3-3: new device found, idVendor=04cc, idProduct=1520 usb 3-3: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-3: configuration #1 chosen from 1 choice hub 3-3:1.0: USB hub found hub 3-3:1.0: 3 ports detected usb 2-2: new full speed USB device using ohci_hcd and address 2 usb 2-2: new device found, idVendor=0000, idProduct=0000 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: SE USB Device usb 2-2: Manufacturer: ServerEngines usb 2-2: SerialNumber: 4004F4854360B4 usb 2-2: configuration #1 chosen from 1 choice scsi0 : ioc0: LSISAS1068, FwRev=01102100h, Ports=1, MaxQ=511, IRQ=16 scsi 0:0:0:0: Direct-Access HP DF072A9844 HPD0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 143374738 512-byte hardware sectors (73408 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:0:0:0: [sda] 143374738 512-byte hardware sectors (73408 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sda:<6>usbcore: registered new interface driver hiddev sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk input: ServerEngines SE USB Device as /class/input/input1 input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:03.1-2 input: ServerEngines SE USB Device as /class/input/input2 input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:03.1-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:04 failed with error -16 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A piix4_smbus 0000:00:02.0: Found 0000:00:02.0 device SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1 SvrWks HT1000: chipset revision 0 SvrWks HT1000: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... libata version 3.00 loaded. Fusion MPT SPI Host driver 3.04.05 ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 32 (level, low) -> IRQ 32 mptbase: Initiating ioc1 bringup sata_svw 0000:01:0e.0: version 2.2 ACPI: PCI Interrupt Link [LNKS] enabled at IRQ 11 ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [LNKS] -> GSI 11 (level, low) -> IRQ 11 scsi1 : sata_svw scsi2 : sata_svw scsi3 : sata_svw scsi4 : sata_svw ata1: SATA max UDMA/133 cmd 0xffffc20000030000 ctl 0xffffc20000030020 bmdma 0xffffc20000030030 irq 11 ata2: SATA max UDMA/133 cmd 0xffffc20000030100 ctl 0xffffc20000030120 bmdma 0xffffc20000030130 irq 11 ata3: SATA max UDMA/133 cmd 0xffffc20000030200 ctl 0xffffc20000030220 bmdma 0xffffc20000030230 irq 11 ata4: SATA max UDMA/133 cmd 0xffffc20000030300 ctl 0xffffc20000030320 bmdma 0xffffc20000030330 irq 11 ata1: SATA link down (SStatus 4 SControl 300) ioc1: 53C1030: Capabilities={Initiator,Target} ata2: SATA link down (SStatus 4 SControl 300) scsi5 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=32 ata3: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) scsi 5:0:0:0: Direct-Access transtec T5016R 0001 PQ: 0 ANSI: 3 target5:0:0: Beginning Domain Validation target5:0:0: Domain Validation skipping write tests target5:0:0: Ending Domain Validation target5:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) sd 5:0:0:0: [sdb] 3515580416 512-byte hardware sectors (1799977 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: ad 00 00 08 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdb] 3515580416 512-byte hardware sectors (1799977 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: ad 00 00 08 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 > sdb: p7 exceeds device capacity sd 5:0:0:0: [sdb] Attached SCSI disk sd 5:0:0:0: Attached scsi generic sg1 type 0 scsi: host 5 channel 0 id 0 lun 0x00000200080c0400 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0xff010000ffffffff has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x00028080000a0000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun33554435 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 0 lun772 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 0 lun 0x0005008002000001 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x0006001440000000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x040703462e800000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x0009000015220000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x070a001130000000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x000bffff080c0400 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0xff0c0000ffffffff has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun168165389 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 0 lun 0x000e0c16c0000080 has a LUN larger than currently supported. scsi: host 5 channel 0 id 0 lun 0x000f00000000d18b has a LUN larger than currently supported. scsi 5:0:1:0: Direct-Access transtec T5016R 0001 PQ: 0 ANSI: 3 target5:0:1: Beginning Domain Validation target5:0:1: Domain Validation skipping write tests target5:0:1: Ending Domain Validation target5:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) sd 5:0:1:0: [sdc] 3515580416 512-byte hardware sectors (1799977 MB) sd 5:0:1:0: [sdc] Write Protect is off sd 5:0:1:0: [sdc] Mode Sense: ad 00 00 08 sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:1:0: [sdc] 3515580416 512-byte hardware sectors (1799977 MB) sd 5:0:1:0: [sdc] Write Protect is off sd 5:0:1:0: [sdc] Mode Sense: ad 00 00 08 sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 5:0:1:0: [sdc] Attached SCSI disk sd 5:0:1:0: Attached scsi generic sg2 type 0 scsi: host 5 channel 0 id 1 lun 0x00000200080c0400 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0xff010000ffffffff has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x00028080000a0000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun33554435 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 1 lun772 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 1 lun 0x0005008002000001 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x0006001440000000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x040703462e800000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x0009000015220000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x070a001130000000 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x000bffff080c0400 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0xff0c0000ffffffff has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun168165389 has a LUN larger than allowed by the host adapter scsi: host 5 channel 0 id 1 lun 0x000e0c16c0000080 has a LUN larger than currently supported. scsi: host 5 channel 0 id 1 lun 0x000f00000000d18b has a LUN larger than currently supported. tg3.c:v3.77 (May 31, 2007) ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 36 (level, low) -> IRQ 36 eth0: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:86:fa:2e eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76148000] dma_mask[40-bit] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 36 (level, low) -> IRQ 36 eth1: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:87:4e:9d eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76148000] dma_mask[40-bit] attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160746, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160748, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160750, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160752, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160794, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160796, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160798, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160800, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 Adding 4474060k swap on /dev/sda1. Priority:-1 extents:1 across:4474060k osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ st: Version 20070203, fixed bufsize 32768, s/g segs 256 SCSI Media Changer driver v0.25 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: table: 253:1: multipath: error getting device device-mapper: ioctl: error adding target to table attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160794, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160796, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160798, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160800, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160794, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160796, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160798, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160800, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 loop: module loaded BIOS EDD facility v0.16 2004-Jun-25, 3 devices found attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 printk: 35 messages suppressed. Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160746, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160748, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160750, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160752, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160794, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160796, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160798, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160800, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160810, limit=3515580416 PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2b00000, writing 2b00146) ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team PM: Writing back config space on device 0000:09:04.1 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:09:04.1 at offset 1 (was 2b00000, writing 2b00146) tg3: eth1: Link is up at 100 Mbps, full duplex. tg3: eth1: Flow control is off for TX and off for RX. 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller vlan9: add 01:00:5e:00:00:01 mcast address to master interface vlan8: add 01:00:5e:00:00:01 mcast address to master interface vlan7: add 01:00:5e:00:00:01 mcast address to master interface vlan6: add 01:00:5e:00:00:01 mcast address to master interface vlan5: add 01:00:5e:00:00:01 mcast address to master interface vlan4: add 01:00:5e:00:00:01 mcast address to master interface vlan3: add 01:00:5e:00:00:01 mcast address to master interface vlan12: add 01:00:5e:00:00:01 mcast address to master interface Bridge firewalling registered vlan9: dev_set_promiscuity(master, 1) device eth1 entered promiscuous mode audit(1198085626.112:2): dev=eth1 prom=256 old_prom=0 auid=4294967295 device vlan9 entered promiscuous mode audit(1198085626.112:3): dev=vlan9 prom=256 old_prom=0 auid=4294967295 bridge9: port 1(vlan9) entering learning state bridge9: topology change detected, propagating bridge9: port 1(vlan9) entering forwarding state vlan8: dev_set_promiscuity(master, 1) device vlan8 entered promiscuous mode audit(1198085641.745:4): dev=vlan8 prom=256 old_prom=0 auid=4294967295 bridge8: port 1(vlan8) entering learning state bridge8: topology change detected, propagating bridge8: port 1(vlan8) entering forwarding state vlan7: dev_set_promiscuity(master, 1) device vlan7 entered promiscuous mode audit(1198085657.386:5): dev=vlan7 prom=256 old_prom=0 auid=4294967295 bridge7: port 1(vlan7) entering learning state bridge7: topology change detected, propagating bridge7: port 1(vlan7) entering forwarding state vlan6: dev_set_promiscuity(master, 1) device vlan6 entered promiscuous mode audit(1198085673.043:6): dev=vlan6 prom=256 old_prom=0 auid=4294967295 bridge6: port 1(vlan6) entering learning state bridge6: topology change detected, propagating bridge6: port 1(vlan6) entering forwarding state vlan5: dev_set_promiscuity(master, 1) device vlan5 entered promiscuous mode audit(1198085688.672:7): dev=vlan5 prom=256 old_prom=0 auid=4294967295 bridge5: port 1(vlan5) entering learning state bridge5: topology change detected, propagating bridge5: port 1(vlan5) entering forwarding state vlan4: dev_set_promiscuity(master, 1) device vlan4 entered promiscuous mode audit(1198085704.321:8): dev=vlan4 prom=256 old_prom=0 auid=4294967295 bridge4: port 1(vlan4) entering learning state bridge4: topology change detected, propagating bridge4: port 1(vlan4) entering forwarding state vlan3: dev_set_promiscuity(master, 1) device vlan3 entered promiscuous mode audit(1198085719.970:9): dev=vlan3 prom=256 old_prom=0 auid=4294967295 bridge3: port 1(vlan3) entering learning state bridge3: topology change detected, propagating bridge3: port 1(vlan3) entering forwarding state vlan12: dev_set_promiscuity(master, 1) device vlan12 entered promiscuous mode audit(1198085735.634:10): dev=vlan12 prom=256 old_prom=0 auid=4294967295 bridge12: port 1(vlan12) entering learning state bridge12: topology change detected, propagating bridge12: port 1(vlan12) entering forwarding state bridge0: starting userspace STP failed, staring kernel STP bridge0: port 1(eth1) entering listening state Setting mem allocation to 1917500 kiB Setting mem allocation to 1917500 kiB PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2b00000, writing 2b00146) eth0 renamed to peth0 veth0 renamed to eth0 NET: Registered protocol family 17 device vif0.0 entered promiscuous mode audit(1198085757.308:11): dev=vif0.0 prom=256 old_prom=0 auid=4294967295 xenbr0: port 1(vif0.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 1(vif0.0) entering forwarding state PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2b00000, writing 2b00146) bridge0: port 1(eth1) entering learning state device peth0 entered promiscuous mode audit(1198085767.496:12): dev=peth0 prom=256 old_prom=0 auid=4294967295 bridge0: port 1(eth1) entering forwarding state usb 3-1: new high speed USB device using ehci_hcd and address 4 usb 3-1: new device found, idVendor=0bc2, idProduct=3000 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: FreeAgentDesktop usb 3-1: Manufacturer: Seagate usb 3-1: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 6:0:0:0: Direct-Access Seagate FreeAgentDesktop 100D PQ: 0 ANSI: 4 sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 1c 00 00 00 sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 1c 00 00 00 sd 6:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 6:0:0:0: [sdd] Attached SCSI disk sd 6:0:0:0: Attached scsi generic sg3 type 0 usb-storage: device scan complete NTFS driver 2.1.28 [Flags: R/W MODULE]. NTFS volume version 3.1. printk: 28 messages suppressed. NTFS-fs error (device sdd1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows. (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 6295 to 6937 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 7150 and revoked 0/0 blocks kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. JBD: barrier-based sync failed on dm-1 - disabling barriers Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 printk: 12 messages suppressed. Buffer I/O error on device sdb7, logical block 2143228416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228417 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228418 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 Buffer I/O error on device sdb7, logical block 2143228419 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160666, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160668, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160670, limit=3515580416 attempt to access beyond end of device sdb: rw=0, want=5303160672, limit=3515580416 PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:04:08.0 PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:04:08.0 PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:04:08.0 ... houndrets and thousands of lines of that are following... xen1:/var/log # uname -a Linux xen1 2.6.22.13-0.3-xen #1 SMP 2007/11/19 15:02:58 UTC x86_64 x86_64 x86_64 GNU/Linux xen1:/var/log # rpm -qa | grep xen xen-3.1.0_15042-51 xen-tools-3.1.0_15042-51 xen-libs-3.1.0_15042-51 kernel-xen-2.6.22.13-0.3 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.