April 2007 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 263275] New: yast does not recognize the needed disk space for the default install
by bugzilla_noreply＠novell.com 16 Dec '08

16 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=263275 Summary: yast does not recognize the needed disk space for the default install Product: openSUSE 10.3 Version: Alpha 3 Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com 10.3a3 on mango.suse.de mango has a 3GB disk. Every default install fit onto the 2.9GB root partition. But with 10.3a3, a default install takes around 3GB. Yast does not complain that the amount of packages to install does not fit onto the root partition. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 10

[Bug 230912] New: customer center config. -- "creating source ..." not stoppable
by bugzilla_noreply＠novell.com 16 Dec '08

16 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=230912 Summary: customer center config. -- "creating source ..." not stoppable Product: openSUSE 10.2 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: jsrain(a)novell.com Well, run it, and try to stop -- impossible. The close widget is not responding, there is not abort button, I have to wait until CCC is finished. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 13

[Bug 264672] New: "yast2-vm" package should be renamed to "yast2-xen"
by bugzilla_noreply＠novell.com 16 Dec '08

16 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=264672 Summary: "yast2-vm" package should be renamed to "yast2-xen" Product: openSUSE 10.3 Version: Alpha 3 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: al4321(a)gmail.com QAContact: jsrain(a)novell.com hi all ! The "yast2-vm" module deals specifically with Xen VM's, not with virtualization generically, so it's best to rename it according to it's capability: "yast2-xen" Related bug: Confusing term: "Virtual Machine Server" https://bugzilla.novell.com/show_bug.cgi?id=261242 -Alexey "Technologov" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 237309] New: yast and libzypp do not respect the disk space reserved for root user
by bugzilla_noreply＠novell.com 16 Dec '08

16 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=237309 Summary: yast and libzypp do not respect the disk space reserved for root user Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: lslezak(a)novell.com ReportedBy: lslezak(a)novell.com QAContact: jsrain(a)novell.com If e.g. root partition has 70MB free space and 500MB free space reserved for root user yast reports 570MB free. But installation of a package which is greater than 70MB fails: installing package kdelibs3-devel-doc-3.5.5-45 needs 335MB on the / filesystem Yast should display the non=root free space. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 269034] New: Duplicate questions when encountering an error while creating a catalog/installation source
by bugzilla_noreply＠novell.com 16 Dec '08

16 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=269034 Summary: Duplicate questions when encountering an error while creating a catalog/installation source Product: openSUSE 10.3 Version: Alpha 3 Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Update Problems AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: gp(a)novell.com QAContact: jsrain(a)novell.com Unfortunately I do not have YaST logs for this one, but I hope the two screenshots I'll attach show the problem in sufficient detail so that it will be easy to understand for a developer. In the first dialog, I chose "Retry", only to be confronted by another dialog offering "Try again? Yes No". This is really redundant and quite confusing for the user. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 7

[Bug 265863] New: dhcp module incomplete
by bugzilla_noreply＠novell.com 11 Dec '08

11 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=265863 Summary: dhcp module incomplete Product: openSUSE 10.3 Version: Alpha 3 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jt(a)newmarket.k12.nh.us QAContact: jsrain(a)novell.com RFE: I would like to see the DHCP Server module include more configuration choices. In light of Novell's recent announcement into the thin client space it is highly likely that more untrained people will be installing this server service. LTSP contains this very intricate config file. http://pastebin.ca/446503 I can't even read this with the currant module. could someone modify this so that it can be read by yast? and this pooling configuration for SAMBA is impossible at the gui.(it doesn't work anyway) log-facility local7; ddns-update-style none; default-lease-time 86400; max-lease-time 129600; option netbios-name-servers X.X.X.X; option domain-name-servers X.X.X.X, X.X.X.X; option netbios-dd-server X.X.X.X; option netbios-node-type 2; option netbios-scope ""; option ntp-servers X.X.X.X; option ip-forwarding off; class "Lab1" { match if ( (substring(option host-name,0,4) = "Lab1") or (substring(option host-name,0,4) = "lab1") or (substring(option host-name,0,4) = "LAB1") ); } class "Lab2" { match if ( (substring(option host-name,0,4) = "Lab2") or (substring(option host-name,0,4) = "lab2") or (substring(option host-name,0,4) = "LAB2") ); } class "Lab3" { match if ( (substring(option host-name,0,4) = "Lab3") or (substring(option host-name,0,4) = "lab3") or (substring(option host-name,0,4) = "LAB3") ); } class "Lab4" { match if ( (substring(option host-name,0,4) = "Lab4") or (substring(option host-name,0,4) = "lab4") or (substring(option host-name,0,4) = "LAB4") ); } subnet 10.0.0.0 netmask 255.128.0.0 { option routers 10.0.0.1; pool { deny members of "Lab1"; deny members of "Lab2"; deny members of "Lab3"; deny members of "Lab4"; range 10.0.6.1 10.0.6.254; option domain-name "6.0.10.internal"; } pool { allow members of "Lab1"; range 10.0.11.1 10.0.11.35; option domain-name "11.0.10.internal"; } pool { allow members of "Lab2"; range 10.0.12.1 10.0.12.35; option domain-name "12.0.10.internal"; } pool { allow members of "Lab3"; range 10.0.13.1 10.0.13.35; option domain-name "13.0.10.internal"; } pool { allow members of "Lab4"; range 10.0.14.1 10.0.14.35; option domain-name "14.0.10.internal"; } } the dns\dhcp modules for Netware had a very nice pick and add menu for options\settings and records configuration. These pick and choose options made it very easy for a novice to configure network settings when following written instructions for the gui \ end user space. not that I even know what it means. Even the simplest of DHCP configs for SAMBA are not possible at the gui. http://samba.org/samba/docs/man/Samba-HOWTO-Collection/DNSDHCP.html remember there are a lot of us in schools and in business who's second job in the organization is technology. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 13

[Bug 244448] New: GRUB graphical menu partially hangs; text mode works
by bugzilla_noreply＠novell.com 10 Dec '08

10 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=244448 Summary: GRUB graphical menu partially hangs; text mode works Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fkamogee(a)yahoo.com QAContact: qa(a)suse.de I have an older machine which was just upgraded with a SATA controller and disk. I moved my openSUSE 10.2 installation to the SATA disk, and all is fine except for this. The graphical menu has three problems: -The default selection with timeout does not work. The menu does not hang completely (I can make a selection and boot), but it never boots automatically. -The animated parts get stuck almost immediately. -If I press ESC to drop to text mode, there is a message dialog, and when that is dismissed, it just hangs. When the gfxmenu is disabled entirely, text mode properly boots the default selection with timeout, and the other two problems are irrelevant. So obviously that is a usable workaround. I tried re-installing grub, both by the command line and by YaST, neither helped. Moreover, the behavior exhibited by the 10.2 DVD is even worse. IIRC, it is completely unusable. I have to prevent it from loading the graphical menu at all, which I did by mashing keys (I think F8 is the one that worked). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 13

[Bug 234545] New: sometimes the sound is broken with alsa and the maestro3 driver
by bugzilla_noreply＠novell.com 09 Dec '08

09 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=234545 Summary: sometimes the sound is broken with alsa and the maestro3 driver Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: SuSE Linux 10.0 Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: admin(a)eregion.de QAContact: qa(a)suse.de CC: suse-beta(a)cboltz.de BugsThisDependsOn: 192264 +++ This bug was initially created as a copy of Bug #192264 +++ Sometimes in KDE, the sound gets "broken" (all sounds sound like they're played with several times the speed than they're supposed to). in some cases, restarting artsd helps; in other cases, terminating arts, then reloading the alsa modules helps; in some cases, a reboot is needed. hwinfo --sound says: 19: PCI 08.0: 0401 Multimedia audio controller [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_125d_1998 Unique ID: RE4e.vQKD5pEhpk5 SysFS ID: /devices/pci0000:00/0000:00:08.0 SysFS BusID: 0000:00:08.0 Hardware Class: sound Model: "Dell ES1983S Maestro-3i PCI Audio Accelerator" Vendor: pci 0x125d "ESS Technology" Device: pci 0x1998 "ES1983S Maestro-3i PCI Audio Accelerator" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x00b0 Revision: 0x10 Driver: "Maestro3" Driver Modules: "snd_maestro3" I/O Ports: 0xd800-0xd8ff (rw) Memory Range: 0xf3ffe000-0xf3ffffff (rw,non-prefetchable) IRQ: 5 (38118 events) Module Alias: "pci:v0000125Dd00001998sv00001028sd000000B0bc04sc01i00" Driver Info #0: Driver Status: snd_maestro3 is active Driver Activation Cmd: "modprobe snd_maestro3" Config Status: cfg=yes, avail=yes, need=no, active=unknown -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 233344] New: No sound from Crystal Audio sound card
by bugzilla_noreply＠novell.com 09 Dec '08

09 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=233344 Summary: No sound from Crystal Audio sound card Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: VladCodrea(a)mail.utexas.edu QAContact: qa(a)suse.de The Crystal Audio sound card on my Dell Inspiron 3200 laptop is not properly detected and no sound applications work. Using YAST to detect legacy audio cards freezes the system. When I try to play a WAVE file, I get: user@laptop:~> playwave compilation-ogg-q0.wav ALSA lib confmisc.c:670:(snd_func_card_driver) cannot find card '0' ALSA lib conf.c:3500:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device ALSA lib confmisc.c:391:(snd_func_concat) error evaluating strings ALSA lib conf.c:3500:(_snd_config_evaluate) function snd_func_concat returned error: No such device ALSA lib confmisc.c:1070:(snd_func_refer) error evaluating name ALSA lib conf.c:3500:(_snd_config_evaluate) function snd_func_refer returned error: No such device ALSA lib conf.c:3968:(snd_config_expand) Evaluate error: No such device ALSA lib pcm.c:2143:(snd_pcm_open_noupdate) Unknown PCM default Opened audio at 22050 Hz 16 bit stereo On an earlier Debian installation (kernel 2.6.19) I was able to hear very faint music through the laptop speakers, but the application (mpg321) still triggered ALSA errors. Another person who has an Inspiron 3200 reported (http://audacityteam.org/forum/thread/184) that the sound card works after the following commands: modprobe sound modprobe ad1848 insmod uart401 insmod cs4232 io=0x530 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=5 However, typing these commands doesn't enable sound for me on OpenSuse 10.2. I am attaching the dmesg below. I'd be happy to provide any other information, try out patches, or give developers SSH access to the affected computer. Thank you. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 22

[Bug 254450] New: Sleep no longer works on Wallstreet II
by bugzilla_noreply＠novell.com 08 Dec '08

08 Dec '08

https://bugzilla.novell.com/show_bug.cgi?id=254450 Summary: Sleep no longer works on Wallstreet II Product: openSUSE 10.2 Version: Final Platform: Macintosh OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: larrystotler(a)netscape.net QAContact: qa(a)suse.de Suspend and Sleep mode no longer work on Wallstreet Series II Powerbook. When selecting Suspend from the desktop, it says preparing to and then says resuming and gives an error box saying that suspend fails. When closing the lid, it will suspend, but when you open it back up, the system restores, but the screen's backlight stays off. Further, sometimes when it is just left running plugged into an AC outlet, the screen will blank, and then when trying to do something, the backlight will be off. At this point, if the lid is closed, it will suspend, and when re-opened and tapping a key, the screen will come back on properly. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 7