Hi, after today's update from Suse's X11:XOrg, comprising: Mesa-libglapi0-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libICE6-32bit|1.0.9-20.1|x86_64|root@xx|X11:XOrg| libgbm1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libEGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libepoxy0|1.2-1.9|x86_64|root@xx|X11:XOrg| libxcb-sync1|1.10-44.1|x86_64||X11:XOrg| libvdpau_nouveau|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libxcb-dri3-0|1.10-44.1|x86_64||X11:XOrg| xorg-x11-server|7.6_1.15.99.903-323.3|x86_64|root@xx|X11:XOrg| xf86-video-intel|2.99.912-124.1|x86_64|root@xx|X11:XOrg| xf86-input-vmmouse|13.0.0-30.1|x86_64|root@xx|X11:XOrg| Mesa-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| my graphical environment was dead. (Before that everything was fine) 1) openSUSE does not boot up to the login screen anymore, but rather, instead of showing the login screen it shows only the green chameleon on black background with lots of random horizontal streaks on the screen. 2) I can switch to a console, login as root and start X by hand (startx). This will indeed start root's KDE, but the window environment reacts very sluggish and upon any action like scrolling or opening pull-down menus, lots of horizontal streaks with random colors show up. Any help would be most welcome Mark My system:
uname -r 3.11.10-11-desktop
cat /etc/SuSE-release openSUSE 13.1 (x86_64) VERSION = 13.1 CODENAME = Bottle
/usr/sbin/hwinfo --gfxcard 09: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.Vu8QTbLxKtB SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel VGA compatible controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0a16 SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x220c Revision: 0x0b Driver: "i915" Driver Modules: "drm" Memory Range: 0xf0000000-0xf03fffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0x3000-0x303f (rw) IRQ: 60 (2966 events) Module Alias: "pci:v00008086d00000A16sv000017AAsd0000220Cbc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown
Primary display adapter: #9
/sbin/lspci -vv | grep -A 12 'VGA cont' 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 220c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-