[opensuse-xorg] Problems with X11:XOrg update
Hi, after today's update from Suse's X11:XOrg, comprising: Mesa-libglapi0-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libICE6-32bit|1.0.9-20.1|x86_64|root@xx|X11:XOrg| libgbm1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libEGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libepoxy0|1.2-1.9|x86_64|root@xx|X11:XOrg| libxcb-sync1|1.10-44.1|x86_64||X11:XOrg| libvdpau_nouveau|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libxcb-dri3-0|1.10-44.1|x86_64||X11:XOrg| xorg-x11-server|7.6_1.15.99.903-323.3|x86_64|root@xx|X11:XOrg| xf86-video-intel|2.99.912-124.1|x86_64|root@xx|X11:XOrg| xf86-input-vmmouse|13.0.0-30.1|x86_64|root@xx|X11:XOrg| Mesa-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| my graphical environment was dead. (Before that everything was fine) 1) openSUSE does not boot up to the login screen anymore, but rather, instead of showing the login screen it shows only the green chameleon on black background with lots of random horizontal streaks on the screen. 2) I can switch to a console, login as root and start X by hand (startx). This will indeed start root's KDE, but the window environment reacts very sluggish and upon any action like scrolling or opening pull-down menus, lots of horizontal streaks with random colors show up. Any help would be most welcome Mark My system:
uname -r 3.11.10-11-desktop
cat /etc/SuSE-release openSUSE 13.1 (x86_64) VERSION = 13.1 CODENAME = Bottle
/usr/sbin/hwinfo --gfxcard 09: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.Vu8QTbLxKtB SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel VGA compatible controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0a16 SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x220c Revision: 0x0b Driver: "i915" Driver Modules: "drm" Memory Range: 0xf0000000-0xf03fffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0x3000-0x303f (rw) IRQ: 60 (2966 events) Module Alias: "pci:v00008086d00000A16sv000017AAsd0000220Cbc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown
Primary display adapter: #9
/sbin/lspci -vv | grep -A 12 'VGA cont' 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 220c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 60 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00018 Data: 0000 Capabilities: [d0] Power Management version 2 -- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
Hi, starting with 2.99.912 the xf86-video-intel driver uses DRI3 which seems to be problematic (Having some random screen corruptions from time to time as well). So this is the most likeliest cause to your problem. After booting your system, can you please do : dmesg >> dmesg.txt and grep your Xorg.0.log from /var/log (before starting X as root). Maybe these will give some information. Greetings, Tobias On 11.06.2014 16:17, Zeitlinie wrote:
Hi,
after today's update from Suse's X11:XOrg, comprising:
Mesa-libglapi0-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libICE6-32bit|1.0.9-20.1|x86_64|root@xx|X11:XOrg| libgbm1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libEGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
libepoxy0|1.2-1.9|x86_64|root@xx|X11:XOrg| libxcb-sync1|1.10-44.1|x86_64||X11:XOrg| libvdpau_nouveau|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libxcb-dri3-0|1.10-44.1|x86_64||X11:XOrg| xorg-x11-server|7.6_1.15.99.903-323.3|x86_64|root@xx|X11:XOrg| xf86-video-intel|2.99.912-124.1|x86_64|root@xx|X11:XOrg|
xf86-input-vmmouse|13.0.0-30.1|x86_64|root@xx|X11:XOrg| Mesa-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
my graphical environment was dead. (Before that everything was fine)
1) openSUSE does not boot up to the login screen anymore, but rather, instead of showing the login screen it shows only the green chameleon on black background with lots of random horizontal streaks on the screen.
2) I can switch to a console, login as root and start X by hand (startx). This will indeed start root's KDE, but the window environment reacts very sluggish and upon any action like scrolling or opening pull-down menus, lots of horizontal streaks with random colors show up.
Any help would be most welcome Mark
My system:
uname -r 3.11.10-11-desktop
cat /etc/SuSE-release openSUSE 13.1 (x86_64) VERSION = 13.1 CODENAME = Bottle
/usr/sbin/hwinfo --gfxcard 09: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.Vu8QTbLxKtB SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel VGA compatible controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0a16 SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x220c Revision: 0x0b Driver: "i915" Driver Modules: "drm" Memory Range: 0xf0000000-0xf03fffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0x3000-0x303f (rw) IRQ: 60 (2966 events) Module Alias: "pci:v00008086d00000A16sv000017AAsd0000220Cbc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown
Primary display adapter: #9
/sbin/lspci -vv | grep -A 12 'VGA cont' 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 220c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 60 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00018 Data: 0000 Capabilities: [d0] Power Management version 2
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
********************** *This is the dmesg ********************** [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.10-11-desktop (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP PREEMPT Mon May 12 13:37:06 UTC 2014 (3d22b5f) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-11-desktop root=UUID=3193404d-4834-498f-a904-0f9320d2f1bd ro resume=/dev/disk/by-id/ata-SAMSUNG_MZ7TD256HAFV-000L9_S17LNSADA02886-part2 splash=silent quiet showopts elevator=noop [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfd57fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfd58000-0x00000000cff59fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cff5a000-0x00000000da412fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da413000-0x00000000dcd3efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000dcefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dcf00000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031e5fffff] usable [ 0.000000] e820: update [mem 0xd11e6018-0xd11f6057] usable ==> usable [ 0.000000] e820: update [mem 0xd11d5018-0xd11e5657] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009bfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000cfd57fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cfd58000-0x00000000cff59fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cff5a000-0x00000000d11d5017] usable [ 0.000000] reserve setup_data: [mem 0x00000000d11d5018-0x00000000d11e5657] usable [ 0.000000] reserve setup_data: [mem 0x00000000d11e5658-0x00000000d11e6017] usable [ 0.000000] reserve setup_data: [mem 0x00000000d11e6018-0x00000000d11f6057] usable [ 0.000000] reserve setup_data: [mem 0x00000000d11f6058-0x00000000da412fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000da413000-0x00000000dcd3efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000dceff000-0x00000000dcefffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dcf00000-0x00000000df9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000031e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI=0xdcefe000 ACPI 2.0=0xdcefe014 SMBIOS=0xdcd3e000 [ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB) [ 0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB) [ 0.000000] efi: mem02: type=2, attr=0xf, range=[0x0000000000059000-0x000000000005b000) (0MB) [ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x000000000005b000-0x000000000009c000) (0MB) [ 0.000000] efi: mem04: type=0, attr=0xf, range=[0x000000000009c000-0x000000000009d000) (0MB) [ 0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000009d000-0x000000000009e000) (0MB) [ 0.000000] efi: mem06: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB) [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002246000) (18MB) [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000002246000-0x000000003ea1b000) (967MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000003ea1b000-0x0000000040000000) (21MB) [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000040000000-0x0000000098db4000) (1421MB) [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000098db4000-0x00000000ce1e4000) (852MB) [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000ce1e4000-0x00000000ce204000) (0MB) [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000ce204000-0x00000000cfb8f000) (25MB) [ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x00000000cfb8f000-0x00000000cfd41000) (1MB) [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000cfd41000-0x00000000cfd58000) (0MB) [ 0.000000] efi: mem17: type=0, attr=0xf, range=[0x00000000cfd58000-0x00000000cff5a000) (2MB) [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000cff5a000-0x00000000d11d4000) (18MB) [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000d11d4000-0x00000000d11d5000) (0MB) [ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x00000000d11d5000-0x00000000d11f9000) (0MB) [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000d11f9000-0x00000000d11fd000) (0MB) [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000d11fd000-0x00000000d1200000) (0MB) [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000d1200000-0x00000000d1205000) (0MB) [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000d1205000-0x00000000d1207000) (0MB) [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000d1207000-0x00000000d1208000) (0MB) [ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x00000000d1208000-0x00000000d1209000) (0MB) [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000d1209000-0x00000000d120a000) (0MB) [ 0.000000] efi: mem28: type=2, attr=0xf, range=[0x00000000d120a000-0x00000000d120b000) (0MB) [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000d120b000-0x00000000d120e000) (0MB) [ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x00000000d120e000-0x00000000d120f000) (0MB) [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000d120f000-0x00000000d1211000) (0MB) [ 0.000000] efi: mem32: type=2, attr=0xf, range=[0x00000000d1211000-0x00000000d1213000) (0MB) [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000d1213000-0x00000000d12da000) (0MB) [ 0.000000] efi: mem34: type=1, attr=0xf, range=[0x00000000d12da000-0x00000000d1413000) (1MB) [ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000d1413000-0x00000000d2ebf000) (26MB) [ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000d2ebf000-0x00000000d2ec0000) (0MB) [ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000d2ec0000-0x00000000d2ec2000) (0MB) [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000d2ec2000-0x00000000d2ec3000) (0MB) [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000d2ec3000-0x00000000d2eca000) (0MB) [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000d2eca000-0x00000000d2ecb000) (0MB) [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000d2ecb000-0x00000000d2ecc000) (0MB) [ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000d2ecc000-0x00000000d2ecd000) (0MB) [ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000d2ecd000-0x00000000d2ef4000) (0MB) [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000d2ef4000-0x00000000d2f26000) (0MB) [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000d2f26000-0x00000000d2f29000) (0MB) [ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000d2f29000-0x00000000d2f2a000) (0MB) [ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000d2f2a000-0x00000000d2f2c000) (0MB) [ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000d2f2c000-0x00000000d2f5c000) (0MB) [ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000d2f5c000-0x00000000d2fba000) (0MB) [ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000d2fba000-0x00000000d4dbf000) (30MB) [ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000d4dbf000-0x00000000d4dd2000) (0MB) [ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x00000000d4dd2000-0x00000000d6413000) (22MB) [ 0.000000] efi: mem53: type=7, attr=0xf, range=[0x00000000d6413000-0x00000000d9e1c000) (58MB) [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000d9e1c000-0x00000000da413000) (5MB) [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000da413000-0x00000000da613000) (2MB) [ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000da613000-0x00000000db3ec000) (13MB) [ 0.000000] efi: mem57: type=0, attr=0xf, range=[0x00000000db3ec000-0x00000000dcd3f000) (25MB) [ 0.000000] efi: mem58: type=10, attr=0xf, range=[0x00000000dcd3f000-0x00000000dce7f000) (1MB) [ 0.000000] efi: mem59: type=9, attr=0xf, range=[0x00000000dce7f000-0x00000000dceff000) (0MB) [ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x00000000dceff000-0x00000000dcf00000) (0MB) [ 0.000000] efi: mem61: type=7, attr=0xf, range=[0x0000000100000000-0x000000031e600000) (8678MB) [ 0.000000] efi: mem62: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB) [ 0.000000] efi: mem63: type=0, attr=0x0, range=[0x00000000dcf00000-0x00000000dfa00000) (43MB) [ 0.000000] efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB) [ 0.000000] efi: mem65: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB) [ 0.000000] efi: mem66: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] efi: mem67: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB) [ 0.000000] efi: mem68: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB) [ 0.000000] efi: mem69: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB) [ 0.000000] efi: mem70: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB) [ 0.000000] efi: mem71: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB) [ 0.000000] efi: mem72: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB) [ 0.000000] efi: mem73: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20AQ0069GE/20AQ0069GE, BIOS GJET74WW (2.24 ) 03/19/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x31e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 00DCF00000 mask 7FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdcf00 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fb4000, 0x01fb4fff] PGTABLE [ 0.000000] BRK [0x01fb5000, 0x01fb5fff] PGTABLE [ 0.000000] BRK [0x01fb6000, 0x01fb6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x31e400000-0x31e5fffff] [ 0.000000] [mem 0x31e400000-0x31e5fffff] page 2M [ 0.000000] BRK [0x01fb7000, 0x01fb7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x31c000000-0x31e3fffff] [ 0.000000] [mem 0x31c000000-0x31e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x300000000-0x31bffffff] [ 0.000000] [mem 0x300000000-0x31bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfd57fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M [ 0.000000] [mem 0xcfc00000-0xcfd57fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xcff5a000-0xda412fff] [ 0.000000] [mem 0xcff5a000-0xcfffffff] page 4k [ 0.000000] [mem 0xd0000000-0xda3fffff] page 2M [ 0.000000] [mem 0xda400000-0xda412fff] page 4k [ 0.000000] BRK [0x01fb8000, 0x01fb8fff] PGTABLE [ 0.000000] BRK [0x01fb9000, 0x01fb9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdceff000-0xdcefffff] [ 0.000000] [mem 0xdceff000-0xdcefffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff] [ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x3ea1b000-0x3fffafff] [ 0.000000] ACPI: RSDP 00000000dcefe014 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000dcefe170 000FC (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dcef8000 0010C (v05 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130517/tbfadt-202) [ 0.000000] ACPI: DSDT 00000000dcee2000 10E74 (v01 LENOVO TP-GJ 00002240 INTL 20120711) [ 0.000000] ACPI: FACS 00000000dce4a000 00040 [ 0.000000] ACPI: SLIC 00000000dcefd000 00176 (v01 LENOVO TP-GJ 00002240 PTEC 00000001) [ 0.000000] ACPI: DBGP 00000000dcefb000 00034 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: ECDT 00000000dcefa000 00052 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: HPET 00000000dcef7000 00038 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: APIC 00000000dcef6000 00098 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: MCFG 00000000dcef5000 0003C (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: SSDT 00000000dcef4000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dcef3000 0044F (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dcee1000 009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dcee0000 00152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dcedf000 007F5 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dcede000 00AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dcedc000 01215 (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000dcedb000 00379 (v01 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 00000000dceda000 0006E (v05 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: SSDT 00000000dced9000 00AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: TCPA 00000000dced8000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: UEFI 00000000dced7000 00042 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: MSDM 00000000dcdb2000 00055 (v03 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: ASF! 00000000dcefc000 000A5 (v32 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: BATB 00000000dced6000 00046 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: FPDT 00000000dced5000 00064 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: UEFI 00000000dced4000 002E2 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: SSDT 00000000dced3000 0047F (v01 LENOVO IsctTabl 00001000 INTL 20120711) [ 0.000000] ACPI: BGRT 00000000dced2000 00038 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: DMAR 00000000dced1000 000B0 (v01 LENOVO TP-GJ 00002240 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x31e5fffff] [ 0.000000] NODE_DATA [mem 0x31e5e9000-0x31e5fcfff] [ 0.000000] [ffffea0000000000-ffffea000affffff] PMD -> [ffff880311c00000-ffff88031c5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x31e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00057fff] [ 0.000000] node 0: [mem 0x00059000-0x0009bfff] [ 0.000000] node 0: [mem 0x0009d000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xcfd57fff] [ 0.000000] node 0: [mem 0xcff5a000-0xda412fff] [ 0.000000] node 0: [mem 0xdceff000-0xdcefffff] [ 0.000000] node 0: [mem 0x100000000-0x31e5fffff] [ 0.000000] On node 0 totalpages: 3114925 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12160 pages used for memmap [ 0.000000] DMA32 zone: 889362 pages, LIFO batch:31 [ 0.000000] Normal zone: 30373 pages used for memmap [ 0.000000] Normal zone: 2221568 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfd58000-0xcff59fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd11d5000-0xd11d5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd11e5000-0xd11e5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd11e6000-0xd11e6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd11f6000-0xd11f6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda413000-0xdcd3efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdcf00000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88031e200000 s83584 r8192 d22912 u262144 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3072313 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-11-desktop root=UUID=3193404d-4834-498f-a904-0f9320d2f1bd ro resume=/dev/disk/by-id/ata-SAMSUNG_MZ7TD256HAFV-000L9_S17LNSADA02886-part2 splash=silent quiet showopts elevator=noop [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 12100404K/12459700K available (5832K kernel code, 772K rwdata, 4344K rodata, 1340K init, 1640K bss, 359296K reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-511. [ 0.000000] NR_IRQS:33024 nr_irqs:1016 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2693.878 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.75 BogoMIPS (lpj=2693878) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000021] init_memory_mapping: [mem 0xda413000-0xda612fff] [ 0.000022] [mem 0xda413000-0xda612fff] page 4k [ 0.000042] init_memory_mapping: [mem 0xda613000-0xdb3ebfff] [ 0.000044] [mem 0xda613000-0xda7fffff] page 4k [ 0.000045] [mem 0xda800000-0xdb1fffff] page 2M [ 0.000045] [mem 0xdb200000-0xdb3ebfff] page 4k [ 0.040298] Security Framework initialized [ 0.040312] AppArmor: AppArmor initialized [ 0.041260] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.044631] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.046086] Mount-cache hash table entries: 256 [ 0.046256] Initializing cgroup subsys memory [ 0.046266] Initializing cgroup subsys devices [ 0.046267] Initializing cgroup subsys freezer [ 0.046269] Initializing cgroup subsys net_cls [ 0.046270] Initializing cgroup subsys blkio [ 0.046271] Initializing cgroup subsys perf_event [ 0.046273] Initializing cgroup subsys hugetlb [ 0.046296] CPU: Physical Processor ID: 0 [ 0.046297] CPU: Processor Core ID: 0 [ 0.046301] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.047365] mce: CPU supports 7 MCE banks [ 0.047379] CPU0: Thermal monitoring enabled (TM1) [ 0.047390] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 tlb_flushall_shift: 6 [ 0.047500] Freeing SMP alternatives memory: 24K (ffffffff81e12000 - ffffffff81e18000) [ 0.048255] ACPI: Core revision 20130517 [ 0.061135] ACPI: All ACPI Tables successfully acquired [ 0.064717] dmar: Host address width 39 [ 0.064719] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.064727] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.064728] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.064734] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.064736] dmar: RMRR base: 0x000000db2cb000 end: 0x000000db2e1fff [ 0.064737] dmar: RMRR base: 0x000000dd800000 end: 0x000000df9fffff [ 0.064861] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.064862] HPET id 0 under DRHD base 0xfed91000 [ 0.065034] Enabled IRQ remapping in x2apic mode [ 0.065035] Enabling x2apic [ 0.065036] Enabled x2apic [ 0.065041] Switched APIC routing to cluster x2apic. [ 0.065663] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.075663] smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (fam: 06, model: 45, stepping: 01) [ 0.075669] TSC deadline timer enabled [ 0.075679] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.075685] ... version: 3 [ 0.075686] ... bit width: 48 [ 0.075687] ... generic registers: 4 [ 0.075688] ... value mask: 0000ffffffffffff [ 0.075689] ... max period: 0000ffffffffffff [ 0.075690] ... fixed-purpose events: 3 [ 0.075691] ... event mask: 000000070000000f [ 0.100252] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.085806] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.132791] Brought up 4 CPUs [ 0.132794] smpboot: Total of 4 processors activated (21551.02 BogoMIPS) [ 0.137469] devtmpfs: initialized [ 0.139003] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] (1310720 bytes) [ 0.139165] RTC time: 15:43:55, date: 06/11/14 [ 0.139207] NET: Registered protocol family 16 [ 0.139330] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.139332] ACPI: bus type PCI registered [ 0.139333] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.139484] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.139486] PCI: not using MMCONFIG [ 0.139487] PCI: Using configuration type 1 for base access [ 0.140413] bio: create slab <bio-0> at 0 [ 0.140534] ACPI: Added _OSI(Module Device) [ 0.140536] ACPI: Added _OSI(Processor Device) [ 0.140537] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.140538] ACPI: Added _OSI(Processor Aggregator Device) [ 0.142550] ACPI: EC: EC description table is found, configuring boot EC [ 0.150494] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.159471] ACPI: SSDT 00000000dccd7918 00436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.160004] ACPI: Dynamic OEM Table Load: [ 0.160006] ACPI: SSDT (null) 00436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.162702] ACPI: SSDT 00000000dcd2e618 005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.163369] ACPI: Dynamic OEM Table Load: [ 0.163371] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.165445] ACPI: SSDT 00000000dcd2fc18 00119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.165968] ACPI: Dynamic OEM Table Load: [ 0.165969] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.168234] ACPI: Interpreter enabled [ 0.168241] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) [ 0.168248] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.168264] ACPI: (supports S0 S3 S4 S5) [ 0.168265] ACPI: Using IOAPIC for interrupt routing [ 0.168285] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.170719] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.180933] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.181667] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.185241] ACPI: Power Resource [PUBS] (on) [ 0.186452] ACPI: Power Resource [NVP3] (on) [ 0.186480] ACPI: Power Resource [NVP2] (on) [ 0.197697] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.197789] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.197878] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.197966] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.198054] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.198141] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.198229] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.198316] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.198368] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.198549] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.198714] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.198716] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.198849] PCI host bridge to bus 0000:00 [ 0.198851] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.198854] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.198855] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.198857] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.198858] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.198860] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.198861] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.198863] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 0.198864] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.198866] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.198868] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.198869] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.198871] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.198872] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.198874] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.198875] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.198877] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff] [ 0.198878] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] [ 0.198887] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.198976] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.198989] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.198996] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.199001] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.199084] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.199092] pci 0000:00:03.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit] [ 0.199196] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.199213] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit] [ 0.199269] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.199312] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.199345] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.199365] pci 0000:00:16.0: reg 0x10: [mem 0xf0639000-0xf063901f 64bit] [ 0.199435] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.199505] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002 [ 0.199522] pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7] [ 0.199531] pci 0000:00:16.3: reg 0x14: [mem 0xf063f000-0xf063ffff] [ 0.199662] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000 [ 0.199678] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff] [ 0.199685] pci 0000:00:19.0: reg 0x14: [mem 0xf063e000-0xf063efff] [ 0.199693] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.199748] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.199792] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.199825] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.199838] pci 0000:00:1b.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit] [ 0.199898] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.199965] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400 [ 0.200025] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.200093] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400 [ 0.200159] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.200205] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.200242] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.200262] pci 0000:00:1d.0: reg 0x10: [mem 0xf063d000-0xf063d3ff] [ 0.200349] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.200401] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.200432] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.200601] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.200615] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.200622] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf] [ 0.200629] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.200635] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb] [ 0.200642] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.200649] pci 0000:00:1f.2: reg 0x24: [mem 0xf063c000-0xf063c7ff] [ 0.200683] pci 0000:00:1f.2: PME# supported from D3hot [ 0.200744] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.200757] pci 0000:00:1f.3: reg 0x10: [mem 0xf0638000-0xf06380ff 64bit] [ 0.200776] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.200913] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.200938] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0500fff] [ 0.201055] pci 0000:02:00.0: supports D1 D2 [ 0.201057] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.202409] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.202414] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.202617] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000 [ 0.202699] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit] [ 0.202913] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.206545] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.206550] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff] [ 0.207720] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.207733] ACPI: \_SB_.PCI0: notify handler is installed [ 0.207788] Found 1 acpi root devices [ 0.207851] ACPI: EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62 [ 0.207912] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none [ 0.207915] vgaarb: loaded [ 0.207916] vgaarb: bridge control possible 0000:00:02.0 [ 0.208002] SCSI subsystem initialized [ 0.208004] ACPI: bus type ATA registered [ 0.208046] libata version 3.00 loaded. [ 0.208050] ACPI: bus type USB registered [ 0.208067] usbcore: registered new interface driver usbfs [ 0.208074] usbcore: registered new interface driver hub [ 0.208096] usbcore: registered new device driver usb [ 0.208161] PCI: Using ACPI for IRQ routing [ 0.209475] PCI: pci_cache_line_size set to 64 bytes [ 0.209799] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.209800] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.209802] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.209803] e820: reserve RAM buffer [mem 0xcfd58000-0xcfffffff] [ 0.209804] e820: reserve RAM buffer [mem 0xd11d5018-0xd3ffffff] [ 0.209806] e820: reserve RAM buffer [mem 0xd11e6018-0xd3ffffff] [ 0.209807] e820: reserve RAM buffer [mem 0xda413000-0xdbffffff] [ 0.209809] e820: reserve RAM buffer [mem 0xdcf00000-0xdfffffff] [ 0.209810] e820: reserve RAM buffer [mem 0x31e600000-0x31fffffff] [ 0.209884] NetLabel: Initializing [ 0.209885] NetLabel: domain hash size = 128 [ 0.209886] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.209896] NetLabel: unlabeled traffic allowed by default [ 0.209922] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.209927] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.211948] Switched to clocksource hpet [ 0.213765] AppArmor: AppArmor Filesystem Enabled [ 0.213780] pnp: PnP ACPI init [ 0.213791] ACPI: bus type PNP registered [ 0.214244] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.214248] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.214250] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.214252] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.214254] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.214257] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.214376] system 00:01: [io 0x1800-0x189f] could not be reserved [ 0.214378] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.214380] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.214382] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.214384] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.214386] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.214388] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.214390] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.214391] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.214393] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.214395] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.214397] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.214400] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.214402] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved [ 0.214404] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.214406] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.214408] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.214410] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.214412] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.214414] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.214483] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.214493] pnp 00:03: [dma 4] [ 0.214508] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.214527] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.214555] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.214581] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.214605] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.214629] pnp 00:08: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active) [ 0.214681] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.215167] pnp: PnP ACPI: found 10 devices [ 0.215168] ACPI: bus type PNP unregistered [ 0.221208] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.221213] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.221220] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.221224] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff] [ 0.221362] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.221364] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.221366] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.221367] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.221369] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.221370] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.221372] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] [ 0.221374] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] [ 0.221375] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] [ 0.221377] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] [ 0.221378] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] [ 0.221380] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff] [ 0.221381] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff] [ 0.221383] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff] [ 0.221384] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff] [ 0.221386] pci_bus 0000:00: resource 19 [mem 0xdfa00000-0xfebfffff] [ 0.221387] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff] [ 0.221389] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.221391] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.221441] NET: Registered protocol family 2 [ 0.221716] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.222043] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.222158] TCP: Hash tables configured (established 131072 bind 65536) [ 0.222174] TCP: reno registered [ 0.222192] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.222241] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.222344] NET: Registered protocol family 1 [ 0.222354] pci 0000:00:02.0: Boot video device [ 0.222796] PCI: CLS 64 bytes, default 64 [ 0.222839] Unpacking initramfs... [ 0.450833] Freeing initrd memory: 22400K (ffff88003ea1b000 - ffff88003fffb000) [ 0.451796] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.451800] software IO TLB [mem 0xca1e4000-0xce1e4000] (64MB) mapped at [ffff8800ca1e4000-ffff8800ce1e3fff] [ 0.452079] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17 [ 0.452086] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17 [ 0.452093] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17 [ 0.452098] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17 [ 0.452122] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.452124] Scanning for low memory corruption every 60 seconds [ 0.452354] audit: initializing netlink socket (disabled) [ 0.452366] type=2000 audit(1402501435.405:1): initialized [ 0.472846] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.473292] zbud: loaded [ 0.473455] VFS: Disk quotas dquot_6.5.2 [ 0.473477] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.473653] msgmni has been set to 23832 [ 0.473879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.473912] io scheduler noop registered (default) [ 0.473914] io scheduler deadline registered [ 0.473929] io scheduler cfq registered [ 0.474055] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.474067] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.474130] efifb: probing for efifb [ 0.475538] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90005d00000, using 8100k, total 8100k [ 0.475540] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.475541] efifb: scrolling: redraw [ 0.475542] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.480253] Console: switching to colour frame buffer device 240x67 [ 0.484891] fb0: EFI VGA frame buffer device [ 0.484896] intel_idle: MWAIT substates: 0x11142120 [ 0.484898] intel_idle: v0.4 model 0x45 [ 0.484899] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.484942] GHES: HEST is not enabled! [ 0.484974] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 0.506434] 0000:00:16.3: ttyS4 at I/O 0x30b0 (irq = 17) is a 16550A [ 0.506635] Non-volatile memory driver v1.3 [ 0.506636] Linux agpgart interface v0.103 [ 0.506718] ahci 0000:00:1f.2: version 3.0 [ 0.506816] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X [ 0.506859] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 0.506863] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.506866] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.507090] scsi0 : ahci [ 0.507174] scsi1 : ahci [ 0.507226] scsi2 : ahci [ 0.507289] ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 58 [ 0.507291] ata2: DUMMY [ 0.507292] ata3: DUMMY [ 0.507308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.507309] ehci-pci: EHCI PCI platform driver [ 0.507408] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.507414] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.507419] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.507431] ehci-pci 0000:00:1d.0: debug port 2 [ 0.511318] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.511332] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063d000 [ 0.516846] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.516863] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.516864] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.516866] usb usb1: Product: EHCI Host Controller [ 0.516868] usb usb1: Manufacturer: Linux 3.11.10-11-desktop ehci_hcd [ 0.516869] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.516962] hub 1-0:1.0: USB hub found [ 0.516967] hub 1-0:1.0: 3 ports detected [ 0.517077] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.517079] uhci_hcd: USB Universal Host Controller Interface driver [ 0.517119] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.518990] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.519011] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.519082] mousedev: PS/2 mouse device common for all mice [ 0.519162] rtc_cmos 00:06: RTC can wake from S4 [ 0.519294] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.519321] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.519441] cpuidle: using governor ladder [ 0.519601] cpuidle: using governor menu [ 0.519615] ledtrig-cpu: registered to indicate activity on CPUs [ 0.519616] EFI Variables Facility v0.08 2004-May-17 [ 0.520857] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.529381] hidraw: raw HID events driver (C) Jiri Kosina [ 0.529442] usbcore: registered new interface driver usbhid [ 0.529443] usbhid: USB HID core driver [ 0.529523] TCP: cubic registered [ 0.529575] NET: Registered protocol family 10 [ 0.529723] Key type dns_resolver registered [ 0.529922] PM: Checking hibernation image partition /dev/disk/by-id/ata-SAMSUNG_MZ7TD256HAFV-000L9_S17LNSADA02886-part2 [ 0.811791] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.814824] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.814828] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.814831] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.814880] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 0.815073] ata1.00: HPA detected: current 450106373, native 500118192 [ 0.815077] ata1.00: supports DRM functions and may not be fully accessible [ 0.815127] ata1.00: ATA-9: SAMSUNG MZ7TD256HAFV-000L9, DXT02L5Q, max UDMA/133 [ 0.815129] ata1.00: 450106373 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 0.815545] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.815549] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.815551] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.815573] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 0.815697] ata1.00: supports DRM functions and may not be fully accessible [ 0.815793] ata1.00: configured for UDMA/133 [ 0.815921] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TD256 DXT0 PQ: 0 ANSI: 5 [ 0.816083] sd 0:0:0:0: [sda] 450106373 512-byte logical blocks: (230 GB/214 GiB) [ 0.816181] sd 0:0:0:0: [sda] Write Protect is off [ 0.816184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.816209] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.818747] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.819184] sda: sda1 sda2 sda3 [ 0.819575] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.933150] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 0.933154] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.933418] hub 1-1:1.0: USB hub found [ 0.933514] hub 1-1:1.0: 8 ports detected [ 1.058139] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00, board id: 2668, fw id: 1545510 [ 1.058146] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 1.098455] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1 [ 1.101581] PM: Hibernation image not present or could not be loaded. [ 1.101616] registered taskstats version 1 [ 1.102727] Magic number: 2:102:740 [ 1.102838] rtc_cmos 00:06: setting system clock to 2014-06-11 15:43:56 UTC (1402501436) [ 1.103763] Freeing unused kernel memory: 1340K (ffffffff81cc3000 - ffffffff81e12000) [ 1.103765] Write protecting the kernel read-only data: 12288k [ 1.104617] Freeing unused kernel memory: 300K (ffff8800015b5000 - ffff880001600000) [ 1.108576] Freeing unused kernel memory: 1800K (ffff880001a3e000 - ffff880001c00000) [ 1.139228] rdac: device handler registered [ 1.140331] hp_sw: device handler registered [ 1.141406] emc: device handler registered [ 1.142486] alua: device handler registered [ 1.145930] systemd-udevd[139]: starting version 208 [ 1.154349] ACPI: Requesting acpi_cpufreq [ 1.155570] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.156688] ACPI: Lid Switch [LID] [ 1.156761] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 1.156805] ACPI: Sleep Button [SLPB] [ 1.156875] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.156909] ACPI: Power Button [PWRF] [ 1.165208] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.165212] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.165218] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.165290] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.165312] xhci_hcd 0000:00:14.0: irq 59 for MSI/MSI-X [ 1.165356] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.165357] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.165359] usb usb2: Product: xHCI Host Controller [ 1.165361] usb usb2: Manufacturer: Linux 3.11.10-11-desktop xhci_hcd [ 1.165362] usb usb2: SerialNumber: 0000:00:14.0 [ 1.165471] xHCI xhci_add_endpoint called for root hub [ 1.165473] xHCI xhci_check_bandwidth called for root hub [ 1.165508] hub 2-0:1.0: USB hub found [ 1.165518] hub 2-0:1.0: 9 ports detected [ 1.165841] [drm] Initialized drm 1.1.0 20060810 [ 1.167942] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.167948] ACPI: Thermal Zone [THM0] (34 C) [ 1.168818] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.168822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.168843] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.168845] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.168846] usb usb3: Product: xHCI Host Controller [ 1.168848] usb usb3: Manufacturer: Linux 3.11.10-11-desktop xhci_hcd [ 1.168849] usb usb3: SerialNumber: 0000:00:14.0 [ 1.168959] xHCI xhci_add_endpoint called for root hub [ 1.168961] xHCI xhci_check_bandwidth called for root hub [ 1.168996] hub 3-0:1.0: USB hub found [ 1.169004] hub 3-0:1.0: 4 ports detected [ 1.184705] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 1.186231] [drm] Memory usable by graphics device = 2048M [ 1.186236] checking generic (e0000000 7e9000) vs hw (e0000000 10000000) [ 1.186239] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver [ 1.186253] Console: switching to colour dummy device 80x25 [ 1.186525] i915 0000:00:02.0: setting latency timer to 64 [ 1.209763] usb 1-1.5: new full-speed USB device number 3 using ehci-pci [ 1.236572] i915 0000:00:02.0: irq 60 for MSI/MSI-X [ 1.236587] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.236588] [drm] Driver supports precise vblank timestamp query. [ 1.236651] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=mem [ 1.295841] usb 1-1.5: No LPM exit latency info found. Power management will be impacted. [ 1.304714] usb 1-1.5: New USB device found, idVendor=058f, idProduct=9540 [ 1.304717] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.304719] usb 1-1.5: Product: EMV Smartcard Reader [ 1.304721] usb 1-1.5: Manufacturer: Generic [ 1.324594] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 1.335185] fbcon: inteldrmfb (fb0) is primary device [ 1.452566] tsc: Refined TSC clocksource calibration: 2693.764 MHz [ 1.521544] usb 2-4: new high-speed USB device number 2 using xhci_hcd [ 1.534945] usb 2-4: New USB device found, idVendor=0bdb, idProduct=193e [ 1.534947] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.534948] usb 2-4: Product: N5321 gw [ 1.534949] usb 2-4: Manufacturer: Lenovo [ 1.534950] usb 2-4: SerialNumber: 416566586065B5M0 [ 1.719491] usb 2-6: new full-speed USB device number 3 using xhci_hcd [ 1.731806] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 [ 1.731808] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.731809] usb 2-6: SerialNumber: 735f888b60a9 [ 1.884431] usb 2-8: new high-speed USB device number 4 using xhci_hcd [ 1.965103] usb 2-8: New USB device found, idVendor=04f2, idProduct=b39a [ 1.965105] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.965106] usb 2-8: Product: Integrated Camera [ 1.965107] usb 2-8: Manufacturer: SunplusIT INC. [ 2.452423] Switched to clocksource tsc [ 2.752208] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.921996] Console: switching to colour frame buffer device 240x67 [ 2.930543] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.930545] i915 0000:00:02.0: registered panic notifier [ 2.937519] acpi device:01: registered as cooling_device4 [ 2.937620] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.937765] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 2.937851] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.689302] PM: Marking nosave pages: [mem 0x00058000-0x00058fff] [ 3.689306] PM: Marking nosave pages: [mem 0x0009c000-0x0009cfff] [ 3.689307] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [ 3.689310] PM: Marking nosave pages: [mem 0xcfd58000-0xcff59fff] [ 3.689319] PM: Marking nosave pages: [mem 0xd11d5000-0xd11d5fff] [ 3.689320] PM: Marking nosave pages: [mem 0xd11e5000-0xd11e6fff] [ 3.689321] PM: Marking nosave pages: [mem 0xd11f6000-0xd11f6fff] [ 3.689322] PM: Marking nosave pages: [mem 0xda413000-0xdcefefff] [ 3.689490] PM: Marking nosave pages: [mem 0xdcf00000-0xffffffff] [ 3.689991] PM: Basic memory bitmaps created [ 3.998338] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 5.306510] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 5.509255] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 [ 5.634737] PM: Basic memory bitmaps freed [ 5.634743] video LNXVIDEO:00: Restoring backlight state [ 5.642479] PM: Starting manual resume from disk [ 5.642483] PM: Hibernation image partition 8:2 present [ 5.642485] PM: Looking for hibernation image. [ 5.642663] PM: Image not found (code -22) [ 5.642665] PM: Hibernation image not present or could not be loaded. [ 5.771137] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 5.781755] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr [ 5.878303] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 5.881703] systemd[1]: Inserted module 'autofs4' [ 5.881914] systemd[1]: Set hostname to <xxxxx>. [ 5.896380] device-mapper: uevent: version 1.0.3 [ 5.896438] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 5.897213] LVM: Logical Volume autoactivation enabled. [ 5.897229] LVM: Activation generator successfully completed. [ 5.946111] systemd[1]: Starting Replay Read-Ahead Data... [ 5.946666] systemd[1]: Starting Collect Read-Ahead Data... [ 5.947026] systemd[1]: Starting System Time Synchronized. [ 5.947079] systemd[1]: Reached target System Time Synchronized. [ 5.947106] systemd[1]: Starting Syslog Socket. [ 5.947194] systemd[1]: Listening on Syslog Socket. [ 5.947217] systemd[1]: Starting Remote File Systems (Pre). [ 5.947262] systemd[1]: Reached target Remote File Systems (Pre). [ 5.947280] systemd[1]: Starting Remote File Systems. [ 5.947324] systemd[1]: Reached target Remote File Systems. [ 5.947355] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 5.947419] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.947433] systemd[1]: Starting Delayed Shutdown Socket. [ 5.947491] systemd[1]: Listening on Delayed Shutdown Socket. [ 5.947499] systemd[1]: Starting LVM2 metadata daemon socket. [ 5.947548] systemd[1]: Listening on LVM2 metadata daemon socket. [ 5.947561] systemd[1]: Starting Encrypted Volumes. [ 5.947586] systemd[1]: Reached target Encrypted Volumes. [ 5.947602] systemd[1]: Starting Journal Socket. [ 5.947677] systemd[1]: Listening on Journal Socket. [ 5.947785] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.948206] systemd[1]: Mounting Huge Pages File System... [ 5.948593] systemd[1]: Starting Create dynamic rule for /dev/root link... [ 5.949044] systemd[1]: Starting LSB: Set default boot entry if called... [ 5.949337] systemd-readahead[269]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 5.949427] systemd[1]: Starting Journal Service... [ 5.949927] systemd[1]: Started Journal Service. [ 5.959832] systemd-journald[275]: Vacuuming done, freed 0 bytes [ 6.002441] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.005760] systemd-udevd[305]: starting version 208 [ 6.021549] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr [ 6.069829] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78) [ 6.072226] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.073784] ACPI: AC Adapter [AC] (on-line) [ 6.075559] wmi: Mapper loaded [ 6.086477] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.086487] ACPI: Battery Slot [BAT0] (battery present) [ 6.086576] mei_me 0000:00:16.0: setting latency timer to 64 [ 6.086655] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X [ 6.087554] pps_core: LinuxPPS API ver. 1 registered [ 6.087557] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 6.087774] PTP clock support registered [ 6.088379] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 6.088381] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 6.091084] e1000e 0000:00:19.0: setting latency timer to 64 [ 6.091169] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 6.091220] e1000e 0000:00:19.0: irq 62 for MSI/MSI-X [ 6.096408] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.096415] ACPI: Battery Slot [BAT1] (battery present) [ 6.116859] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [ 6.118439] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 6.147369] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 6.147372] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 6.147374] thinkpad_acpi: ThinkPad BIOS GJET74WW (2.24 ), EC unknown [ 6.147375] thinkpad_acpi: Lenovo ThinkPad T440s, model 20AQ0069GE [ 6.148003] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 6.148034] thinkpad_acpi: radio switch found; radios are enabled [ 6.148044] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 6.148045] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 6.150231] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 6.150479] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 6.150533] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 6.151671] Linux video capture interface: v2.00 [ 6.152050] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 6.152971] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a) [ 6.161466] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input9 [ 6.161528] usbcore: registered new interface driver uvcvideo [ 6.161530] USB Video Class driver (1.1.1) [ 6.168495] cdc_acm 2-4:1.1: ttyACM0: USB ACM device [ 6.171735] cdc_acm 2-4:1.3: ttyACM1: USB ACM device [ 6.180574] cdc_acm 2-4:1.9: ttyACM2: USB ACM device [ 6.187667] usbcore: registered new interface driver cdc_acm [ 6.187669] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 6.187697] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device [ 6.187729] cdc_wdm 2-4:1.8: cdc-wdm1: USB WDM device [ 6.187742] usbcore: registered new interface driver cdc_wdm [ 6.204007] usb 2-4: MAC-Address: 02:15:e0:ec:01:00 [ 6.204133] cdc_ncm 2-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4, Mobile Broadband Network Device, 02:15:e0:ec:01:00 [ 6.204155] usbcore: registered new interface driver cdc_ncm [ 6.204443] usbcore: registered new interface driver cdc_mbim [ 6.244864] systemd-udevd[342]: renamed network interface wwan0 to wwp0s20u4i6 [ 6.247605] Adding 15728636k swap on /dev/sda2. Priority:-1 extents:1 across:15728636k SSFS [ 6.259657] systemd-journald[275]: Received request to flush runtime journal from PID 1 [ 6.260041] e1000e 0000:00:19.0 eth0: registered PHC clock [ 6.260045] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:3e:4f:3e [ 6.260047] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 6.260072] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 6.260099] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.260151] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130517/utaddress-251) [ 6.260157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.260160] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251) [ 6.260163] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.260164] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251) [ 6.260167] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.260168] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 6.262297] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 6.262453] ALSA hda_i915.c:58 HDA driver get symbol successfully from i915 module [ 6.262491] snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X [ 6.262613] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X [ 6.264371] rtsx_pci 0000:02:00.0: irq 65 for MSI/MSI-X [ 6.264389] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 65 [ 6.264731] iTCO_vendor_support: vendor-support=0 [ 6.264908] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 6.264933] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 6.265232] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.271205] cfg80211: Calling CRDA to update world regulatory domain [ 6.274450] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 6.274453] Copyright(c) 2003-2013 Intel Corporation [ 6.274665] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 6.275296] iwlwifi 0000:03:00.0: irq 66 for MSI/MSI-X [ 6.276073] ALSA hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 5[1]:0 [ 6.276130] ALSA hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 6[1]:0 [ 6.276194] ALSA hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 7[1]:0 [ 6.276693] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 6.276855] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 6.276913] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 6.280570] ALSA patch_realtek.c:418 SKU: Nid=0x1d sku_cfg=0x40738105 [ 6.280574] ALSA patch_realtek.c:420 SKU: port_connectivity=0x1 [ 6.280576] ALSA patch_realtek.c:421 SKU: enable_pcbeep=0x1 [ 6.280577] ALSA patch_realtek.c:422 SKU: check_sum=0x00000003 [ 6.280579] ALSA patch_realtek.c:423 SKU: customization=0x00000081 [ 6.280580] ALSA patch_realtek.c:424 SKU: external_amp=0x0 [ 6.280581] ALSA patch_realtek.c:425 SKU: platform_type=0x1 [ 6.280583] ALSA patch_realtek.c:426 SKU: swap=0x0 [ 6.280584] ALSA patch_realtek.c:427 SKU: override=0x1 [ 6.280892] iwlwifi 0000:03:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm [ 6.281034] ALSA hda_auto_parser.c:393 autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 6.281036] ALSA hda_auto_parser.c:397 speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 6.281038] ALSA hda_auto_parser.c:401 hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 6.281040] ALSA hda_auto_parser.c:402 mono: mono_out=0x0 [ 6.281041] ALSA hda_auto_parser.c:406 inputs: [ 6.281043] ALSA hda_auto_parser.c:410 Dock Mic=0x19 [ 6.281044] ALSA hda_auto_parser.c:410 Mic=0x1a [ 6.281046] ALSA hda_auto_parser.c:410 Internal Mic=0x12 [ 6.281048] ALSA patch_realtek.c:490 realtek: No valid SSID, checking pincfg 0x40738105 for NID 0x1d [ 6.281049] ALSA patch_realtek.c:506 realtek: Enabling init ASM_ID=0x8105 CODEC_ID=10ec0292 [ 6.282859] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13 [ 6.286939] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 6.287027] systemd-udevd[334]: renamed network interface eth0 to enp0s25 [ 6.287347] cfg80211: World regulatory domain updated: [ 6.287349] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.287351] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.287353] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.287354] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.287355] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.287357] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.287376] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 6.287432] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 6.287515] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 6.289567] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 6.290278] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 6.290811] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 6.307680] type=1400 audit(1402501441.705:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=565 comm="apparmor_parser" [ 6.316594] type=1400 audit(1402501441.714:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=575 comm="apparmor_parser" [ 6.320569] type=1400 audit(1402501441.718:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=580 comm="apparmor_parser" [ 6.323885] type=1400 audit(1402501441.722:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=589 comm="apparmor_parser" [ 6.329931] type=1400 audit(1402501441.728:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=599 comm="apparmor_parser" [ 6.330194] type=1400 audit(1402501441.728:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=599 comm="apparmor_parser" [ 6.330436] type=1400 audit(1402501441.728:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=599 comm="apparmor_parser" [ 6.330628] type=1400 audit(1402501441.728:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=599 comm="apparmor_parser" [ 6.336332] type=1400 audit(1402501441.734:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=603 comm="apparmor_parser" [ 6.342365] type=1400 audit(1402501441.740:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/auth" pid=607 comm="apparmor_parser" [ 6.536624] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6.546791] systemd-udevd[324]: renamed network interface wlan0 to wlp3s0 [ 6.557346] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.574592] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 6.577811] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.588129] vboxdrv: Found 4 processor cores. [ 6.589224] vboxdrv: fAsync=0 offMin=0x117 offMax=0x2121 [ 6.589269] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 6.589270] vboxdrv: Successfully loaded version 4.3.12 (interface 0x001a0007). [ 6.804976] vboxpci: IOMMU not found (not registered) [ 6.818118] e1000e 0000:00:19.0: irq 62 for MSI/MSI-X [ 6.918586] e1000e 0000:00:19.0: irq 62 for MSI/MSI-X [ 6.918683] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 6.922452] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 6.922936] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 6.935118] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 6.938608] NET: Registered protocol family 17 [ 6.951298] Bluetooth: Core ver 2.16 [ 6.951317] NET: Registered protocol family 31 [ 6.951318] Bluetooth: HCI device and connection manager initialized [ 6.951325] Bluetooth: HCI socket layer initialized [ 6.951327] Bluetooth: L2CAP socket layer initialized [ 6.951331] Bluetooth: SCO socket layer initialized [ 6.954128] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.954131] Bluetooth: BNEP filters: protocol multicast [ 6.954138] Bluetooth: BNEP socket layer initialized [ 9.878118] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 9.878144] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 11.260490] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:2ad2:44ff:fe3e:4f3e DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=418 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=378 [ 11.282604] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:2ad2:44ff:fe3e:4f3e DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=249 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=209 [ 11.510930] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:2ad2:44ff:fe3e:4f3e DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=418 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=378 [ 11.761248] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:2ad2:44ff:fe3e:4f3e DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=418 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=378 [ 11.961669] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:2ad2:44ff:fe3e:4f3e DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=388 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=348 [ 11.979384] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 13.722797] IPv4: martian source 255.255.255.255 from 134.169.85.114, on dev enp0s25 [ 13.722813] ll header: 00000000: ff ff ff ff ff ff 20 cf 30 5a b4 e3 08 00 ...... .0Z.... [ 15.944998] IPv4: martian source 255.255.255.255 from 134.169.85.48, on dev enp0s25 [ 15.945010] ll header: 00000000: ff ff ff ff ff ff f0 de f1 e1 cb 21 08 00 ...........!.. ********************************************* *This is the xorg log before X server start ********************************************* [ 6.581] This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. [ 6.581] X.Org X Server 1.15.99.903 (1.16.0 RC 3) Release Date: 2014-06-04 [ 6.582] X Protocol Version 11, Revision 0 [ 6.582] Build Operating System: openSUSE SUSE LINUX [ 6.582] Current Operating System: Linux xxxxx 3.11.10-11-desktop #1 SMP PREEMPT Mon May 12 13:37:06 UTC 2014 (3d22b5f) x86_64 [ 6.582] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-11-desktop root=UUID=3193404d-4834-498f-a904-0f9320d2f1bd ro resume=/dev/disk/by-id/ata-SAMSUNG_MZ7TD256HAFV-000L9_S17LNSADA02886-part2 splash=silent quiet showopts elevator=noop [ 6.582] Build Date: 10 June 2014 05:23:37PM [ 6.582] [ 6.582] Current version of pixman: 0.30.2 [ 6.582] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 6.582] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 6.582] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 11 17:44:02 2014 [ 6.582] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 6.582] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 6.582] (==) No Layout section. Using the first Screen section. [ 6.582] (==) No screen section available. Using defaults. [ 6.582] (**) |-->Screen "Default Screen Section" (0) [ 6.582] (**) | |-->Monitor "<default monitor>" [ 6.582] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 6.582] (==) Automatically adding devices [ 6.582] (==) Automatically enabling devices [ 6.582] (==) Automatically adding GPU devices [ 6.582] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 6.582] Entry deleted from font path. [ 6.582] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/ghostscript/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [ 6.582] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" [ 6.582] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 6.582] (II) Loader magic: 0x810c60 [ 6.582] (II) Module ABI versions: [ 6.582] X.Org ANSI C Emulation: 0.4 [ 6.582] X.Org Video Driver: 18.0 [ 6.582] X.Org XInput driver : 21.0 [ 6.582] X.Org Server Extension : 8.0 [ 6.582] (II) xfree86: Adding drm device (/dev/dri/card0) [ 6.584] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:220c rev 11, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64 [ 6.584] (II) LoadModule: "glx" [ 6.586] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 6.586] (II) Module glx: vendor="X.Org Foundation" [ 6.586] compiled for 1.15.99.903, module version = 1.0.0 [ 6.586] ABI class: X.Org Server Extension, version 8.0 [ 6.586] (==) AIGLX enabled [ 6.586] (==) Matched intel as autoconfigured driver 0 [ 6.586] (==) Matched intel as autoconfigured driver 1 [ 6.586] (==) Matched modesetting as autoconfigured driver 2 [ 6.586] (==) Matched fbdev as autoconfigured driver 3 [ 6.586] (==) Matched vesa as autoconfigured driver 4 [ 6.586] (==) Assigned the driver to the xf86ConfigLayout [ 6.587] (II) LoadModule: "intel" [ 6.587] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 6.587] (II) Module intel: vendor="X.Org Foundation" [ 6.587] compiled for 1.15.99.903, module version = 2.99.912 [ 6.587] Module class: X.Org Video Driver [ 6.587] ABI class: X.Org Video Driver, version 18.0 [ 6.587] (II) LoadModule: "modesetting" [ 6.587] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [ 6.587] (II) Module modesetting: vendor="X.Org Foundation" [ 6.587] compiled for 1.15.99.903, module version = 0.8.0 [ 6.587] Module class: X.Org Video Driver [ 6.587] ABI class: X.Org Video Driver, version 18.0 [ 6.587] (II) LoadModule: "fbdev" [ 6.587] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 6.587] (II) Module fbdev: vendor="X.Org Foundation" [ 6.587] compiled for 1.15.99.903, module version = 0.4.4 [ 6.587] Module class: X.Org Video Driver [ 6.587] ABI class: X.Org Video Driver, version 18.0 [ 6.587] (II) LoadModule: "vesa" [ 6.588] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 6.588] (II) Module vesa: vendor="X.Org Foundation" [ 6.588] compiled for 1.15.99.903, module version = 2.3.3 [ 6.588] Module class: X.Org Video Driver [ 6.588] ABI class: X.Org Video Driver, version 18.0 [ 6.588] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 6.588] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000 [ 6.588] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100 [ 6.588] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200 [ 6.588] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 6.588] (II) FBDEV: driver for framebuffer: fbdev [ 6.588] (II) VESA: driver for VESA chipsets: vesa [ 6.588] (++) using VT number 7 [ 6.588] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730 [ 6.588] (WW) Falling back to old probe method for modesetting [ 6.588] (WW) Falling back to old probe method for fbdev [ 6.588] (II) Loading sub module "fbdevhw" [ 6.588] (II) LoadModule: "fbdevhw" [ 6.589] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 6.589] (II) Module fbdevhw: vendor="X.Org Foundation" [ 6.589] compiled for 1.15.99.903, module version = 0.0.2 [ 6.589] ABI class: X.Org Video Driver, version 18.0 [ 6.589] (WW) Falling back to old probe method for vesa [ 6.589] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400 [ 6.589] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2 [ 6.589] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 6.589] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 6.589] (==) intel(0): RGB weight 888 [ 6.589] (==) intel(0): Default visual is TrueColor [ 6.589] (**) intel(0): Framebuffer tiled [ 6.589] (**) intel(0): Pixmaps tiled [ 6.589] (**) intel(0): Forcing per-crtc-pixmaps? no [ 6.589] (II) intel(0): Output eDP1 has no monitor section [ 6.589] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output eDP1 [ 6.589] (II) intel(0): Output DP1 has no monitor section [ 6.589] (II) intel(0): Output HDMI1 has no monitor section [ 6.589] (II) intel(0): Output DP2 has no monitor section [ 6.589] (II) intel(0): Output HDMI2 has no monitor section [ 6.589] (--) intel(0): Using a maximum size of 64x64 for hardware cursors [ 6.589] (II) intel(0): Output VIRTUAL1 has no monitor section [ 6.589] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0 [ 6.589] (**) intel(0): TearFree disabled [ 6.589] (++) intel(0): DPI set to (158, 158) [ 6.589] (II) Loading sub module "dri3" [ 6.589] (II) LoadModule: "dri3" [ 6.589] (II) Module "dri3" already built-in [ 6.589] (II) Loading sub module "dri2" [ 6.589] (II) LoadModule: "dri2" [ 6.589] (II) Module "dri2" already built-in [ 6.589] (II) Loading sub module "present" [ 6.589] (II) LoadModule: "present" [ 6.589] (II) Module "present" already built-in [ 6.589] (II) UnloadModule: "modesetting" [ 6.589] (II) Unloading modesetting [ 6.589] (II) UnloadModule: "fbdev" [ 6.589] (II) Unloading fbdev [ 6.589] (II) UnloadSubModule: "fbdevhw" [ 6.589] (II) Unloading fbdevhw [ 6.589] (II) UnloadModule: "vesa" [ 6.589] (II) Unloading vesa [ 6.590] (==) Depth 24 pixmap format is 32 bpp [ 6.590] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend [ 6.590] (==) intel(0): Backing store enabled [ 6.590] (==) intel(0): Silken mouse enabled [ 6.590] (II) intel(0): HW Cursor enabled [ 6.590] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 6.590] (==) intel(0): DPMS enabled [ 6.590] (II) intel(0): [DRI2] Setup complete [ 6.590] (II) intel(0): [DRI2] DRI driver: i965 [ 6.590] (II) intel(0): [DRI2] VDPAU driver: i965 [ 6.590] (II) intel(0): direct rendering: DRI2 DRI3 enabled [ 6.590] (II) intel(0): hardware support for Present enabled [ 6.590] (==) intel(0): hotplug detection: "enabled" [ 6.590] (--) RandR disabled [ 6.601] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 6.601] (II) AIGLX: enabled GLX_ARB_create_context [ 6.601] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 6.601] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 6.601] (II) AIGLX: enabled GLX_INTEL_swap_event [ 6.601] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 6.601] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 6.601] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 6.601] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 6.601] (II) AIGLX: Loaded and initialized i965 [ 6.601] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 6.604] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 6.625] (II) intel(0): Setting screen physical size to 308 x 173 [ 6.733] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.733] (**) Power Button: Applying InputClass "LocalKeyboard" [ 6.733] (II) LoadModule: "evdev" [ 6.733] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 6.734] (II) Module evdev: vendor="X.Org Foundation" [ 6.734] compiled for 1.15.99.903, module version = 2.9.0 [ 6.734] Module class: X.Org XInput Driver [ 6.734] ABI class: X.Org XInput driver, version 21.0 [ 6.734] (II) Using input driver 'evdev' for 'Power Button' [ 6.734] (**) Power Button: always reports core events [ 6.734] (**) evdev: Power Button: Device: "/dev/input/event4" [ 6.734] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6.734] (--) evdev: Power Button: Found keys [ 6.734] (II) evdev: Power Button: Configuring as keyboard [ 6.734] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 6.734] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 6.734] (**) Option "xkb_rules" "evdev" [ 6.734] (**) Option "xkb_model" "pc104" [ 6.734] (**) Option "xkb_layout" "de" [ 6.734] (**) Option "xkb_variant" "nodeadkeys" [ 6.774] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 6.774] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 6.774] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 6.774] (**) Video Bus: Applying InputClass "LocalKeyboard" [ 6.774] (II) Using input driver 'evdev' for 'Video Bus' [ 6.774] (**) Video Bus: always reports core events [ 6.774] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 6.774] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 6.774] (--) evdev: Video Bus: Found keys [ 6.774] (II) evdev: Video Bus: Configuring as keyboard [ 6.774] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5" [ 6.774] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 6.774] (**) Option "xkb_rules" "evdev" [ 6.774] (**) Option "xkb_model" "pc104" [ 6.774] (**) Option "xkb_layout" "de" [ 6.774] (**) Option "xkb_variant" "nodeadkeys" [ 6.774] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 6.774] (II) No input driver specified, ignoring this device. [ 6.774] (II) This device may have been added with another device file. [ 6.775] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 6.775] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 6.775] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 6.775] (**) Sleep Button: Applying InputClass "LocalKeyboard" [ 6.775] (II) Using input driver 'evdev' for 'Sleep Button' [ 6.775] (**) Sleep Button: always reports core events [ 6.775] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 6.775] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 6.775] (--) evdev: Sleep Button: Found keys [ 6.775] (II) evdev: Sleep Button: Configuring as keyboard [ 6.775] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3" [ 6.775] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 6.775] (**) Option "xkb_rules" "evdev" [ 6.775] (**) Option "xkb_model" "pc104" [ 6.775] (**) Option "xkb_layout" "de" [ 6.775] (**) Option "xkb_variant" "nodeadkeys" [ 6.776] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event10) [ 6.776] (II) No input driver specified, ignoring this device. [ 6.776] (II) This device may have been added with another device file. [ 6.776] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event11) [ 6.776] (II) No input driver specified, ignoring this device. [ 6.776] (II) This device may have been added with another device file. [ 6.776] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event12) [ 6.776] (II) No input driver specified, ignoring this device. [ 6.776] (II) This device may have been added with another device file. [ 6.776] (II) config/udev: Adding input device Integrated Camera (/dev/input/event9) [ 6.776] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall" [ 6.776] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall" [ 6.776] (**) Integrated Camera: Applying InputClass "LocalKeyboard" [ 6.776] (II) Using input driver 'evdev' for 'Integrated Camera' [ 6.776] (**) Integrated Camera: always reports core events [ 6.776] (**) evdev: Integrated Camera: Device: "/dev/input/event9" [ 6.776] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb39a [ 6.776] (--) evdev: Integrated Camera: Found keys [ 6.776] (II) evdev: Integrated Camera: Configuring as keyboard [ 6.776] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input9/event9" [ 6.776] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9) [ 6.776] (**) Option "xkb_rules" "evdev" [ 6.776] (**) Option "xkb_model" "pc104" [ 6.776] (**) Option "xkb_layout" "de" [ 6.776] (**) Option "xkb_variant" "nodeadkeys" [ 6.777] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13) [ 6.777] (II) No input driver specified, ignoring this device. [ 6.777] (II) This device may have been added with another device file. [ 6.778] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14) [ 6.778] (II) No input driver specified, ignoring this device. [ 6.778] (II) This device may have been added with another device file. [ 6.778] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event15) [ 6.778] (II) No input driver specified, ignoring this device. [ 6.778] (II) This device may have been added with another device file. [ 6.781] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16) [ 6.781] (II) No input driver specified, ignoring this device. [ 6.781] (II) This device may have been added with another device file. [ 6.781] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event17) [ 6.781] (II) No input driver specified, ignoring this device. [ 6.781] (II) This device may have been added with another device file. [ 6.781] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard" [ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 6.785] (**) AT Translated Set 2 keyboard: always reports core events [ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 6.785] (**) Option "xkb_rules" "evdev" [ 6.785] (**) Option "xkb_model" "pc104" [ 6.785] (**) Option "xkb_layout" "de" [ 6.785] (**) Option "xkb_variant" "nodeadkeys" [ 6.785] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1) [ 6.785] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 6.785] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 6.785] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 6.785] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 6.785] (II) LoadModule: "synaptics" [ 6.785] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 6.785] (II) Module synaptics: vendor="X.Org Foundation" [ 6.785] compiled for 1.15.99.903, module version = 1.8.0 [ 6.785] Module class: X.Org XInput Driver [ 6.785] ABI class: X.Org XInput driver, version 21.0 [ 6.785] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 6.785] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 6.785] (**) Option "Device" "/dev/input/event1" [ 6.848] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property [ 6.848] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5112 (res 42) [ 6.848] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 3834 (res 42) [ 6.848] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 6.848] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 6.848] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple [ 6.848] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 6.848] (**) Option "LeftEdge" "1025" [ 6.848] (**) Option "RightEdge" "5110" [ 6.848] (**) Option "TopEdge" "4830" [ 6.848] (**) Option "BottomEdge" "2024" [ 6.848] (**) Option "HorizHysteresis" "25" [ 6.848] (**) Option "VertHysteresis" "25" [ 6.848] (**) Option "HasSecondarySoftButtons" "true" [ 6.848] (**) Option "HorizEdgeScroll" "off" [ 6.848] (**) Option "TapButton1" "1" [ 6.848] (**) Option "TapButton2" "3" [ 6.848] (**) Option "TapButton3" "2" [ 6.848] (**) Option "PalmDetect" "1" [ 6.848] (**) Option "PalmMinWidth" "5" [ 6.848] (**) Option "PalmMinZ" "40" [ 6.848] (WW) synaptics: SynPS/2 Synaptics TouchPad: TopEdge is bigger than BottomEdge. Fixing. [ 6.848] (**) Option "SoftButtonAreas" "3000 0 4000 0 0 0 0 0" [ 6.848] (**) Option "SecondarySoftButtonAreas" "3660 0 0 2800 2330 3659 0 2800" [ 6.848] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 6.848] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 6.869] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1" [ 6.869] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 6.869] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 6.869] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 6.869] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.046 [ 6.869] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 6.869] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 6.869] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 6.869] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 6.869] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 6.869] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 6.869] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 6.869] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6) [ 6.869] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" [ 6.869] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" [ 6.869] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation" [ 6.869] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' [ 6.869] (**) TPPS/2 IBM TrackPoint: always reports core events [ 6.869] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6" [ 6.869] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa [ 6.869] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons [ 6.869] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes [ 6.869] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes [ 6.869] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse [ 6.869] (**) Option "Emulate3Buttons" "on" [ 6.869] (**) Option "EmulateWheel" "on" [ 6.869] (**) Option "EmulateWheelButton" "2" [ 6.869] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 [ 6.869] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 6.869] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input6/event6" [ 6.869] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12) [ 6.869] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes. [ 6.869] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 [ 6.869] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 [ 6.869] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 [ 6.869] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 [ 6.870] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1) [ 6.870] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation" [ 6.870] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' [ 6.870] (**) TPPS/2 IBM TrackPoint: always reports core events [ 6.870] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/mouse1" [ 6.870] (EE) evdev: TPPS/2 IBM TrackPoint: Unable to query fd: Inappropriate ioctl for device [ 6.892] (EE) PreInit returned 2 for "TPPS/2 IBM TrackPoint" [ 6.892] (II) UnloadModule: "evdev" [ 6.892] (II) config/udev: Adding input device PC Speaker (/dev/input/event7) [ 6.892] (II) No input driver specified, ignoring this device. [ 6.892] (II) This device may have been added with another device file. [ 6.893] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event8) [ 6.893] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" [ 6.893] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" [ 6.893] (**) ThinkPad Extra Buttons: Applying InputClass "LocalKeyboard" [ 6.893] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons' [ 6.893] (**) ThinkPad Extra Buttons: always reports core events [ 6.893] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event8" [ 6.893] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054 [ 6.893] (--) evdev: ThinkPad Extra Buttons: Found keys [ 6.893] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard [ 6.893] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input8/event8" [ 6.893] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13) [ 6.893] (**) Option "xkb_rules" "evdev" [ 6.893] (**) Option "xkb_model" "pc104" [ 6.893] (**) Option "xkb_layout" "de" [ 6.893] (**) Option "xkb_variant" "nodeadkeys" [ 49.510] (II) AIGLX: Suspending AIGLX clients for VT switch On 06/11/2014 04:35 PM, Tobias klausmann wrote:
Hi, starting with 2.99.912 the xf86-video-intel driver uses DRI3 which seems to be problematic (Having some random screen corruptions from time to time as well). So this is the most likeliest cause to your problem.
After booting your system, can you please do : dmesg >> dmesg.txt and grep your Xorg.0.log from /var/log (before starting X as root).
Maybe these will give some information.
Greetings, Tobias
On 11.06.2014 16:17, Zeitlinie wrote:
Hi,
after today's update from Suse's X11:XOrg, comprising:
Mesa-libglapi0-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libICE6-32bit|1.0.9-20.1|x86_64|root@xx|X11:XOrg| libgbm1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libEGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
libepoxy0|1.2-1.9|x86_64|root@xx|X11:XOrg| libxcb-sync1|1.10-44.1|x86_64||X11:XOrg| libvdpau_nouveau|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libxcb-dri3-0|1.10-44.1|x86_64||X11:XOrg| xorg-x11-server|7.6_1.15.99.903-323.3|x86_64|root@xx|X11:XOrg| xf86-video-intel|2.99.912-124.1|x86_64|root@xx|X11:XOrg|
xf86-input-vmmouse|13.0.0-30.1|x86_64|root@xx|X11:XOrg| Mesa-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
my graphical environment was dead. (Before that everything was fine)
1) openSUSE does not boot up to the login screen anymore, but rather, instead of showing the login screen it shows only the green chameleon on black background with lots of random horizontal streaks on the screen.
2) I can switch to a console, login as root and start X by hand (startx). This will indeed start root's KDE, but the window environment reacts very sluggish and upon any action like scrolling or opening pull-down menus, lots of horizontal streaks with random colors show up.
Any help would be most welcome Mark
My system:
uname -r 3.11.10-11-desktop
cat /etc/SuSE-release openSUSE 13.1 (x86_64) VERSION = 13.1 CODENAME = Bottle
/usr/sbin/hwinfo --gfxcard 09: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.Vu8QTbLxKtB SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel VGA compatible controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0a16 SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x220c Revision: 0x0b Driver: "i915" Driver Modules: "drm" Memory Range: 0xf0000000-0xf03fffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0x3000-0x303f (rw) IRQ: 60 (2966 events) Module Alias: "pci:v00008086d00000A16sv000017AAsd0000220Cbc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown
Primary display adapter: #9
/sbin/lspci -vv | grep -A 12 'VGA cont' 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 220c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 60 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00018 Data: 0000 Capabilities: [d0] Power Management version 2
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
Hi, it looks like the bug was fixed by intel already: http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/commit/?id=c9003c6d... i have created a SR to X11:XOrg with that fix added: https://build.opensuse.org/request/show/236903 On 11.06.2014 18:00, Zeitlinie wrote:
********************** *This is the dmesg ********************** ...snip...
On 06/11/2014 04:35 PM, Tobias klausmann wrote:
Hi, starting with 2.99.912 the xf86-video-intel driver uses DRI3 which seems to be problematic (Having some random screen corruptions from time to time as well). So this is the most likeliest cause to your problem.
After booting your system, can you please do : dmesg >> dmesg.txt and grep your Xorg.0.log from /var/log (before starting X as root).
Maybe these will give some information.
Greetings, Tobias
On 11.06.2014 16:17, Zeitlinie wrote:
Hi,
after today's update from Suse's X11:XOrg, comprising:
Mesa-libglapi0-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libICE6-32bit|1.0.9-20.1|x86_64|root@xx|X11:XOrg| libgbm1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libEGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
libepoxy0|1.2-1.9|x86_64|root@xx|X11:XOrg| libxcb-sync1|1.10-44.1|x86_64||X11:XOrg| libvdpau_nouveau|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libxcb-dri3-0|1.10-44.1|x86_64||X11:XOrg| xorg-x11-server|7.6_1.15.99.903-323.3|x86_64|root@xx|X11:XOrg| xf86-video-intel|2.99.912-124.1|x86_64|root@xx|X11:XOrg|
xf86-input-vmmouse|13.0.0-30.1|x86_64|root@xx|X11:XOrg| Mesa-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
my graphical environment was dead. (Before that everything was fine)
1) openSUSE does not boot up to the login screen anymore, but rather, instead of showing the login screen it shows only the green chameleon on black background with lots of random horizontal streaks on the screen.
2) I can switch to a console, login as root and start X by hand (startx). This will indeed start root's KDE, but the window environment reacts very sluggish and upon any action like scrolling or opening pull-down menus, lots of horizontal streaks with random colors show up.
Any help would be most welcome Mark
My system:
uname -r 3.11.10-11-desktop
cat /etc/SuSE-release openSUSE 13.1 (x86_64) VERSION = 13.1 CODENAME = Bottle
/usr/sbin/hwinfo --gfxcard 09: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.Vu8QTbLxKtB SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel VGA compatible controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0a16 SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x220c Revision: 0x0b Driver: "i915" Driver Modules: "drm" Memory Range: 0xf0000000-0xf03fffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0x3000-0x303f (rw) IRQ: 60 (2966 events) Module Alias: "pci:v00008086d00000A16sv000017AAsd0000220Cbc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown
Primary display adapter: #9
/sbin/lspci -vv | grep -A 12 'VGA cont' 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 220c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 60 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00018 Data: 0000 Capabilities: [d0] Power Management version 2
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
Thanks for getting back to me. I'm hoping very much, that this will actually solve the issue. Moreover I'm embarrassed to show of my ignorance, but since this is my 1st time reporting to this list:
i have created a SR to X11:XOrg with that fix added: https://build.opensuse.org/request/show/236903
does this imply there will be an openSUSE update w.r.t. soon? On 06/11/2014 06:46 PM, Tobias klausmann wrote:
Hi, it looks like the bug was fixed by intel already: http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/commit/?id=c9003c6d...
i have created a SR to X11:XOrg with that fix added: https://build.opensuse.org/request/show/236903
On 11.06.2014 18:00, Zeitlinie wrote:
********************** *This is the dmesg ********************** ...snip...
On 06/11/2014 04:35 PM, Tobias klausmann wrote:
Hi, starting with 2.99.912 the xf86-video-intel driver uses DRI3 which seems to be problematic (Having some random screen corruptions from time to time as well). So this is the most likeliest cause to your problem.
After booting your system, can you please do : dmesg >> dmesg.txt and grep your Xorg.0.log from /var/log (before starting X as root).
Maybe these will give some information.
Greetings, Tobias
On 11.06.2014 16:17, Zeitlinie wrote:
Hi,
after today's update from Suse's X11:XOrg, comprising:
Mesa-libglapi0-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libICE6-32bit|1.0.9-20.1|x86_64|root@xx|X11:XOrg| libgbm1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libEGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
libepoxy0|1.2-1.9|x86_64|root@xx|X11:XOrg| libxcb-sync1|1.10-44.1|x86_64||X11:XOrg| libvdpau_nouveau|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libxcb-dri3-0|1.10-44.1|x86_64||X11:XOrg| xorg-x11-server|7.6_1.15.99.903-323.3|x86_64|root@xx|X11:XOrg| xf86-video-intel|2.99.912-124.1|x86_64|root@xx|X11:XOrg|
xf86-input-vmmouse|13.0.0-30.1|x86_64|root@xx|X11:XOrg| Mesa-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
my graphical environment was dead. (Before that everything was fine)
1) openSUSE does not boot up to the login screen anymore, but rather, instead of showing the login screen it shows only the green chameleon on black background with lots of random horizontal streaks on the screen.
2) I can switch to a console, login as root and start X by hand (startx). This will indeed start root's KDE, but the window environment reacts very sluggish and upon any action like scrolling or opening pull-down menus, lots of horizontal streaks with random colors show up.
Any help would be most welcome Mark
My system:
uname -r 3.11.10-11-desktop
cat /etc/SuSE-release openSUSE 13.1 (x86_64) VERSION = 13.1 CODENAME = Bottle
/usr/sbin/hwinfo --gfxcard 09: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.Vu8QTbLxKtB SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel VGA compatible controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0a16 SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x220c Revision: 0x0b Driver: "i915" Driver Modules: "drm" Memory Range: 0xf0000000-0xf03fffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0x3000-0x303f (rw) IRQ: 60 (2966 events) Module Alias: "pci:v00008086d00000A16sv000017AAsd0000220Cbc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown
Primary display adapter: #9
/sbin/lspci -vv | grep -A 12 'VGA cont' 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 220c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 60 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00018 Data: 0000 Capabilities: [d0] Power Management version 2
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
On 11.06.2014 20:40, Zeitlinie wrote:
Thanks for getting back to me. I'm hoping very much, that this will actually solve the issue.
Moreover I'm embarrassed to show of my ignorance, but since this is my 1st time reporting to this list:
i have created a SR to X11:XOrg with that fix added: https://build.opensuse.org/request/show/236903 does this imply there will be an openSUSE update w.r.t. soon?
If the SR (Submitrequest) gets accepted by the maintainer, X11:XOrg will rebuild that package (and all packages depending on it). And as i see now, it got accepted. The repo is still building, you can check if it is finished here: https://build.opensuse.org/project/monitor/X11:XOrg Please note, the patch is only in the X11:XOrg Repo and won't get delivered by the 13.1 Update Repo!
On 06/11/2014 06:46 PM, Tobias klausmann wrote:
Hi, it looks like the bug was fixed by intel already: http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/commit/?id=c9003c6d...
i have created a SR to X11:XOrg with that fix added: https://build.opensuse.org/request/show/236903
On 11.06.2014 18:00, Zeitlinie wrote:
********************** *This is the dmesg ********************** ...snip...
On 06/11/2014 04:35 PM, Tobias klausmann wrote:
Hi, starting with 2.99.912 the xf86-video-intel driver uses DRI3 which seems to be problematic (Having some random screen corruptions from time to time as well). So this is the most likeliest cause to your problem.
After booting your system, can you please do : dmesg >> dmesg.txt and grep your Xorg.0.log from /var/log (before starting X as root).
Maybe these will give some information.
Greetings, Tobias
On 11.06.2014 16:17, Zeitlinie wrote:
Hi,
after today's update from Suse's X11:XOrg, comprising:
Mesa-libglapi0-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libICE6-32bit|1.0.9-20.1|x86_64|root@xx|X11:XOrg| libgbm1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libEGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
libepoxy0|1.2-1.9|x86_64|root@xx|X11:XOrg| libxcb-sync1|1.10-44.1|x86_64||X11:XOrg| libvdpau_nouveau|10.2.1-372.1|x86_64|root@xx|X11:XOrg| libxcb-dri3-0|1.10-44.1|x86_64||X11:XOrg| xorg-x11-server|7.6_1.15.99.903-323.3|x86_64|root@xx|X11:XOrg| xf86-video-intel|2.99.912-124.1|x86_64|root@xx|X11:XOrg|
xf86-input-vmmouse|13.0.0-30.1|x86_64|root@xx|X11:XOrg| Mesa-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg| Mesa-libGL1-32bit|10.2.1-372.1|x86_64|root@xx|X11:XOrg|
my graphical environment was dead. (Before that everything was fine)
1) openSUSE does not boot up to the login screen anymore, but rather, instead of showing the login screen it shows only the green chameleon on black background with lots of random horizontal streaks on the screen.
2) I can switch to a console, login as root and start X by hand (startx). This will indeed start root's KDE, but the window environment reacts very sluggish and upon any action like scrolling or opening pull-down menus, lots of horizontal streaks with random colors show up.
Any help would be most welcome Mark
My system:
uname -r 3.11.10-11-desktop
cat /etc/SuSE-release openSUSE 13.1 (x86_64) VERSION = 13.1 CODENAME = Bottle
/usr/sbin/hwinfo --gfxcard 09: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.Vu8QTbLxKtB SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel VGA compatible controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0a16 SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x220c Revision: 0x0b Driver: "i915" Driver Modules: "drm" Memory Range: 0xf0000000-0xf03fffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0x3000-0x303f (rw) IRQ: 60 (2966 events) Module Alias: "pci:v00008086d00000A16sv000017AAsd0000220Cbc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown
Primary display adapter: #9
/sbin/lspci -vv | grep -A 12 'VGA cont' 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 220c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 60 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00018 Data: 0000 Capabilities: [d0] Power Management version 2
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
Ok., so the X11:XOrg > Status Monitor for 13.1 x86_64 says the repository 'has been published' and kicking-off my Software Updater from the System Tray there was only one update, namely the xf86-video-intel driver .... and .... indeed my machine seems back to life (me too). Thanks so much - that was really great! Mark On 06/11/2014 08:50 PM, Tobias klausmann wrote:
If the SR (Submitrequest) gets accepted by the maintainer, X11:XOrg will rebuild that package (and all packages depending on it). And as i see now, it got accepted. The repo is still building, you can check if it is finished here: https://build.opensuse.org/project/monitor/X11:XOrg
Please note, the patch is only in the X11:XOrg Repo and won't get delivered by the 13.1 Update Repo!
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
I'd like to return bugging (warning) this list with an info about continuing issues with the xf86-video-intel driver. Just 3 days ago, the new version of this driver bricked all of my graphics because of incompatibilities with openSUSE's 3.11 kernel (see previous posts in this thread). Now, the newest version from X11:Org, xf86-video-intel-2.99.912-125.1.x86_64.rpm seems to run properly at 1st sight, but then it turns out that it severely breaks major software relying on proper graphics systems installed. In my case it is the CAS Mathematica: with the xf86-video-intel-2.99.912-125.1.x86_64.rpm installed, Mathematica has stopped to display 3D graphics. I filed a bug report directly at the https://bugs.freedesktop.org/show_bug.cgi?id=79999 , but (as to be expected) the developers from there offered assistance beyond my capabilities. Mark On 06/11/2014 09:25 PM, Zeitlinie wrote:
Ok., so the X11:XOrg > Status Monitor for 13.1 x86_64 says the repository 'has been published' and kicking-off my Software Updater from the System Tray there was only one update, namely the xf86-video-intel driver .... and .... indeed my machine seems back to life (me too).
Thanks so much - that was really great! Mark
On 06/11/2014 08:50 PM, Tobias klausmann wrote:
If the SR (Submitrequest) gets accepted by the maintainer, X11:XOrg will rebuild that package (and all packages depending on it). And as i see now, it got accepted. The repo is still building, you can check if it is finished here: https://build.opensuse.org/project/monitor/X11:XOrg
Please note, the patch is only in the X11:XOrg Repo and won't get delivered by the 13.1 Update Repo!
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
So for what i can see the 3D part is rendered as is should, just not shown, it's just a syncronization bug somewhere, just stay calm, the next version will fix it eventually. :) If you are interested i could pack you the latest version of that driver, maybe that helps you. Tobias On 14.06.2014 10:45, Zeitlinie wrote:
I'd like to return bugging (warning) this list with an info about continuing issues with the xf86-video-intel driver.
Just 3 days ago, the new version of this driver bricked all of my graphics because of incompatibilities with openSUSE's 3.11 kernel (see previous posts in this thread).
Now, the newest version from X11:Org, xf86-video-intel-2.99.912-125.1.x86_64.rpm seems to run properly at 1st sight, but then it turns out that it severely breaks major software relying on proper graphics systems installed.
In my case it is the CAS Mathematica: with the xf86-video-intel-2.99.912-125.1.x86_64.rpm installed, Mathematica has stopped to display 3D graphics.
I filed a bug report directly at the https://bugs.freedesktop.org/show_bug.cgi?id=79999 , but (as to be expected) the developers from there offered assistance beyond my capabilities.
Mark
On 06/11/2014 09:25 PM, Zeitlinie wrote:
Ok., so the X11:XOrg > Status Monitor for 13.1 x86_64 says the repository 'has been published' and kicking-off my Software Updater from the System Tray there was only one update, namely the xf86-video-intel driver .... and .... indeed my machine seems back to life (me too).
Thanks so much - that was really great! Mark
On 06/11/2014 08:50 PM, Tobias klausmann wrote:
If the SR (Submitrequest) gets accepted by the maintainer, X11:XOrg will rebuild that package (and all packages depending on it). And as i see now, it got accepted. The repo is still building, you can check if it is finished here: https://build.opensuse.org/project/monitor/X11:XOrg
Please note, the patch is only in the X11:XOrg Repo and won't get delivered by the 13.1 Update Repo!
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
You have probably seen that there has been some additional developments on https://bugs.freedesktop.org/show_bug.cgi?id=79999 It seems the bug is confirmed - but no solution yet.
If you are interested i could pack you the latest version of that driver, maybe that helps you.
Before I'll start soliciting for 'out-off-update-cyle' packaging of drivers :) , let's indeed wait to see if the developers can fix this in a regular fashion in a reasonable amount of time. Thanks anyway. Mark On 06/14/2014 04:28 PM, Tobias klausmann wrote:
So for what i can see the 3D part is rendered as is should, just not shown, it's just a syncronization bug somewhere, just stay calm, the next version will fix it eventually. :) If you are interested i could pack you the latest version of that driver, maybe that helps you.
Tobias
On 14.06.2014 10:45, Zeitlinie wrote:
I'd like to return bugging (warning) this list with an info about continuing issues with the xf86-video-intel driver.
Just 3 days ago, the new version of this driver bricked all of my graphics because of incompatibilities with openSUSE's 3.11 kernel (see previous posts in this thread).
Now, the newest version from X11:Org, xf86-video-intel-2.99.912-125.1.x86_64.rpm seems to run properly at 1st sight, but then it turns out that it severely breaks major software relying on proper graphics systems installed.
In my case it is the CAS Mathematica: with the xf86-video-intel-2.99.912-125.1.x86_64.rpm installed, Mathematica has stopped to display 3D graphics.
I filed a bug report directly at the https://bugs.freedesktop.org/show_bug.cgi?id=79999 , but (as to be expected) the developers from there offered assistance beyond my capabilities.
Mark
On 06/11/2014 09:25 PM, Zeitlinie wrote:
Ok., so the X11:XOrg > Status Monitor for 13.1 x86_64 says the repository 'has been published' and kicking-off my Software Updater from the System Tray there was only one update, namely the xf86-video-intel driver .... and .... indeed my machine seems back to life (me too).
Thanks so much - that was really great! Mark
On 06/11/2014 08:50 PM, Tobias klausmann wrote:
If the SR (Submitrequest) gets accepted by the maintainer, X11:XOrg will rebuild that package (and all packages depending on it). And as i see now, it got accepted. The repo is still building, you can check if it is finished here: https://build.opensuse.org/project/monitor/X11:XOrg
Please note, the patch is only in the X11:XOrg Repo and won't get delivered by the 13.1 Update Repo!
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
Hi Tobias, the bug https://bugs.freedesktop.org/show_bug.cgi?id=79999 in xf86-video-intel which broke Mathematica seems to have been fixed. May I ask if you know what the timeline between such corrective commits on http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/ and the actual update of the openSUSE repo would usually be? More directly speaking I need 'my' Mathematica graphics to work again. I.e. it would be cool if there would be an openSUSE update soon (which then hopefully is even less buggy than the last one ;) ) ------------- Furthermore, while I'm at it let me also ask something more general in relation to the xf86-video-intel driver. Maybe you can tell me: I realized that, contrary to my initial belief, the driver is not a 'kernel driver' in the sense that one does not need properly configured kernel header files in order to compile a clone from git://anongit.freedesktop.org/xorg/driver/xf86-video-intel. Instead a simple ./autogen.sh --prefix=/usr make makes the driver. So I guess, that with 'sudo make install' I would have the 'bleeding edge' version in my system. However before doing so, I unpacked the rpm from http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_13.1/x86_64/xf8... in some test directory and compared its file structure with that from a test installation of xf86-video-intel from the git clone into some user space directory. One immediately realizes that there would be major differences between these two installs. So therefore my actual question is if you know how openSUSE transforms the git clones into their source tar.gz bundles? If I'd knew that, I could simple download the openSUSE spec file for the driver and could build my own rpm from the git clone whenever I want - without having to bug mailing lists. Mark On 06/15/2014 02:03 AM, Zeitlinie wrote:
You have probably seen that there has been some additional developments on https://bugs.freedesktop.org/show_bug.cgi?id=79999
It seems the bug is confirmed - but no solution yet.
If you are interested i could pack you the latest version of that driver, maybe that helps you.
Before I'll start soliciting for 'out-off-update-cyle' packaging of drivers :) , let's indeed wait to see if the developers can fix this in a regular fashion in a reasonable amount of time. Thanks anyway.
Mark
On 06/14/2014 04:28 PM, Tobias klausmann wrote:
So for what i can see the 3D part is rendered as is should, just not shown, it's just a syncronization bug somewhere, just stay calm, the next version will fix it eventually. :) If you are interested i could pack you the latest version of that driver, maybe that helps you.
Tobias
On 14.06.2014 10:45, Zeitlinie wrote:
I'd like to return bugging (warning) this list with an info about continuing issues with the xf86-video-intel driver.
Just 3 days ago, the new version of this driver bricked all of my graphics because of incompatibilities with openSUSE's 3.11 kernel (see previous posts in this thread).
Now, the newest version from X11:Org, xf86-video-intel-2.99.912-125.1.x86_64.rpm seems to run properly at 1st sight, but then it turns out that it severely breaks major software relying on proper graphics systems installed.
In my case it is the CAS Mathematica: with the xf86-video-intel-2.99.912-125.1.x86_64.rpm installed, Mathematica has stopped to display 3D graphics.
I filed a bug report directly at the https://bugs.freedesktop.org/show_bug.cgi?id=79999 , but (as to be expected) the developers from there offered assistance beyond my capabilities.
Mark
On 06/11/2014 09:25 PM, Zeitlinie wrote:
Ok., so the X11:XOrg > Status Monitor for 13.1 x86_64 says the repository 'has been published' and kicking-off my Software Updater from the System Tray there was only one update, namely the xf86-video-intel driver .... and .... indeed my machine seems back to life (me too).
Thanks so much - that was really great! Mark
On 06/11/2014 08:50 PM, Tobias klausmann wrote:
If the SR (Submitrequest) gets accepted by the maintainer, X11:XOrg will rebuild that package (and all packages depending on it). And as i see now, it got accepted. The repo is still building, you can check if it is finished here: https://build.opensuse.org/project/monitor/X11:XOrg
Please note, the patch is only in the X11:XOrg Repo and won't get delivered by the 13.1 Update Repo!
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
On 16.06.2014 13:24, Zeitlinie wrote:
Hi Tobias,
the bug https://bugs.freedesktop.org/show_bug.cgi?id=79999 in xf86-video-intel which broke Mathematica seems to have been fixed.
May I ask if you know what the timeline between such corrective commits on http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/ and the actual update of the openSUSE repo would usually be?
That depends on someone who updates the package and sends it to the devel repo (here X11:XOrg). I'm just packing the latest git version with your fix included and will send it to X11:XOrg (oh wait Stefan already updated the package to resolve your bug). Just wait for the build to finish again :)
More directly speaking I need 'my' Mathematica graphics to work again. I.e. it would be cool if there would be an openSUSE update soon (which then hopefully is even less buggy than the last one ;) )
-------------
Furthermore, while I'm at it let me also ask something more general in relation to the xf86-video-intel driver. Maybe you can tell me:
I realized that, contrary to my initial belief, the driver is not a 'kernel driver' in the sense that one does not need properly configured kernel header files in order to compile a clone from git://anongit.freedesktop.org/xorg/driver/xf86-video-intel. Instead a simple
./autogen.sh --prefix=/usr make
makes the driver. So I guess, that with 'sudo make install' I would have the 'bleeding edge' version in my system.
However before doing so, I unpacked the rpm from http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_13.1/x86_64/xf8... in some test directory and compared its file structure with that from a test installation of xf86-video-intel from the git clone into some user space directory. One immediately realizes that there would be major differences between these two installs.
I don't really know how the src packages are formed, just look at the "real" packages which has the same datastructure as your git compilation has :)
So therefore my actual question is if you know how openSUSE transforms the git clones into their source tar.gz bundles?
If I'd knew that, I could simple download the openSUSE spec file for the driver and could build my own rpm from the git clone whenever I want - without having to bug mailing lists.
Mark
On 06/15/2014 02:03 AM, Zeitlinie wrote:
You have probably seen that there has been some additional developments on https://bugs.freedesktop.org/show_bug.cgi?id=79999
It seems the bug is confirmed - but no solution yet.
If you are interested i could pack you the latest version of that driver, maybe that helps you. Before I'll start soliciting for 'out-off-update-cyle' packaging of drivers :) , let's indeed wait to see if the developers can fix this in a regular fashion in a reasonable amount of time. Thanks anyway.
Mark
On 06/14/2014 04:28 PM, Tobias klausmann wrote:
So for what i can see the 3D part is rendered as is should, just not shown, it's just a syncronization bug somewhere, just stay calm, the next version will fix it eventually. :) If you are interested i could pack you the latest version of that driver, maybe that helps you.
Tobias
On 14.06.2014 10:45, Zeitlinie wrote:
I'd like to return bugging (warning) this list with an info about continuing issues with the xf86-video-intel driver.
Just 3 days ago, the new version of this driver bricked all of my graphics because of incompatibilities with openSUSE's 3.11 kernel (see previous posts in this thread).
Now, the newest version from X11:Org, xf86-video-intel-2.99.912-125.1.x86_64.rpm seems to run properly at 1st sight, but then it turns out that it severely breaks major software relying on proper graphics systems installed.
In my case it is the CAS Mathematica: with the xf86-video-intel-2.99.912-125.1.x86_64.rpm installed, Mathematica has stopped to display 3D graphics.
I filed a bug report directly at the https://bugs.freedesktop.org/show_bug.cgi?id=79999 , but (as to be expected) the developers from there offered assistance beyond my capabilities.
Mark
On 06/11/2014 09:25 PM, Zeitlinie wrote:
Ok., so the X11:XOrg > Status Monitor for 13.1 x86_64 says the repository 'has been published' and kicking-off my Software Updater from the System Tray there was only one update, namely the xf86-video-intel driver .... and .... indeed my machine seems back to life (me too).
Thanks so much - that was really great! Mark
On 06/11/2014 08:50 PM, Tobias klausmann wrote:
If the SR (Submitrequest) gets accepted by the maintainer, X11:XOrg will rebuild that package (and all packages depending on it). And as i see now, it got accepted. The repo is still building, you can check if it is finished here: https://build.opensuse.org/project/monitor/X11:XOrg
Please note, the patch is only in the X11:XOrg Repo and won't get delivered by the 13.1 Update Repo!
-- To unsubscribe, e-mail: opensuse-xorg+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-xorg+owner@opensuse.org
participants (2)
-
Tobias klausmann -
Zeitlinie