[opensuse] A problem with the smartd daemon.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I get these repeated warnings in the log of my home server: <3.2> 2020-08-01T17:17:14.068115+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.2> 2020-08-01T18:17:14.247482+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data But the thing is, smartctl can read that disk just fine: Isengard:~ # smartctl -i /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.12.14-lp151.28.52-default] (SUSE RPM) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: WDC HGST Ultrastar He10 Device Model: WDC WD80EZAZ-11TDBA0 Serial Number: 2TKST2SD LU WWN Device Id: 5 000cca 26af51579 Firmware Version: 83.H0A83 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Aug 1 13:51:20 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled Isengard:~ # Isengard:~ # smartctl -A /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.12.14-lp151.28.52-default] (SUSE RPM) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0004 128 128 054 Old_age Offline - 116 ... Isengard:~ # smartctl --test=short /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.12.14-lp151.28.52-default] (SUSE RPM) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Sat Aug 1 20:30:49 2020 CEST Use smartctl -X to abort test. Isengard:~ # Looking at the /var/log/messages file, it gets weirder: <3.6> 2020-08-01T15:47:03.217524+02:00 Isengard smartd 3543 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2020-08-01T15:47:04.105688+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], opened <3.6> 2020-08-01T15:47:04.106285+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], WDC WD80EZAZ-11TDBA0, S/N:2TKST2SD, WWN:5-000cca-26af51579, FW:83.H0A83, 8.00 TB <3.6> 2020-08-01T15:47:04.119302+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], found in smartd database: WDC HGST Ultrastar He10 <3.6> 2020-08-01T15:47:04.135383+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], enabled SMART Attribute Autosave. <3.6> 2020-08-01T15:47:04.142911+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], is SMART capable. Adding to "monitor" list. <3.6> 2020-08-01T15:47:04.144358+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state read from /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2020-08-01T15:47:04.717689+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2020-08-01T16:17:12.489203+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-01T16:17:14.439038+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-01T16:17:16.388831+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], Read SMART Self Test Log Failed <3.6> 2020-08-01T16:47:04.708009+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 130 to 132 <3.6> 2020-08-01T17:17:12.118117+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-01T17:17:14.068115+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-01T18:17:12.297698+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-01T18:17:14.247482+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data Isengard:~ # It did read the temperature change, but it claims the other errors, which are false. The configuration is: Isengard:~ # cat /etc/smartd.conf | egrep -v "^[[:space:]]*$|^#" /dev/sda -a -S on -T permissive -s (S/../.././02|L/../../6/03) -m root@telcontar.valinor /dev/disk/by-id/wwn-0x5000c50075a83eaf -d removable -a -o on -S on -s (S/../.././02|L/../../6/03) -m root@telcontar.valinor /dev/disk/by-id/wwn-0x5000c5009399305f -d removable -a -o on -S on -s (S/../.././02|L/../../6/03) -m root@telcontar.valinor /dev/disk/by-id/wwn-0x5000c500c4beb480 -d removable -a -o on -S on -s (S/../.././02|L/../../6/03) -m root@telcontar.valinor /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d removable -a -S on -s (S/../.././02|L/../../6/03) /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 -d removable -a -S on -s (S/../.././02|L/../../6/03) Isengard:~ # Ideas? - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXyW2oxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVALoAniU1xYdaGy+1QAPCRquZ cvXKko/pAKCW0QUrf2rCELri0rf/VJawmzkSnw== =8hOP -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Hello, On Sat, 01 Aug 2020, Carlos E. R. wrote:
I get these repeated warnings in the log of my home server:
<3.2> 2020-08-01T17:17:14.068115+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data [..] But the thing is, smartctl can read that disk just fine: [..] <3.6> 2020-08-01T15:47:04.119302+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], found in smartd database: WDC HGST Ultrastar He10 [..] <3.6> 2020-08-01T16:17:12.489203+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check [..] The configuration is:
Isengard:~ # cat /etc/smartd.conf | egrep -v "^[[:space:]]*$|^#" [..] /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d removable -a -S on -s (S/../.././02|L/../../6/03) /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 -d removable -a -S on -s (S/../.././02|L/../../6/03) Isengard:~ #
First, add a newline at the end of the file ;) Well, SMART-over-USB has quirks. Try '-d sat' in addition to '-d removable'. And BTW: '-S on' should only needed once (if ever). So try this instead of above two: /dev/[..] -d removable -d sat -a -s (S/../.././02|L/../../6/03) HTH, -dnh -- OTOH, it turned out that when the customer was a church with a Xenix box, having to talk them into a triple-six chmod was a *bit* of an issue. -- Anthony de Boer -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 02/08/2020 01.44, David Haller wrote:
Hello,
On Sat, 01 Aug 2020, Carlos E. R. wrote:
I get these repeated warnings in the log of my home server:
<3.2> 2020-08-01T17:17:14.068115+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data [..] But the thing is, smartctl can read that disk just fine: [..] <3.6> 2020-08-01T15:47:04.119302+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], found in smartd database: WDC HGST Ultrastar He10 [..] <3.6> 2020-08-01T16:17:12.489203+02:00 Isengard smartd 5945 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check [..] The configuration is:
Isengard:~ # cat /etc/smartd.conf | egrep -v "^[[:space:]]*$|^#" [..] /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d removable -a -S on -s (S/../.././02|L/../../6/03) /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 -d removable -a -S on -s (S/../.././02|L/../../6/03) Isengard:~ #
First, add a newline at the end of the file ;)
There is one. I usually take care to add one, I was caught by it once or twice ;-)
Well, SMART-over-USB has quirks. Try '-d sat' in addition to '-d removable'. And BTW: '-S on' should only needed once (if ever). So try this instead of above two:
/dev/[..] -d removable -d sat -a -s (S/../.././02|L/../../6/03)
I forgot trying -d sat. Ok, will see in an hour or two if it works. With that error, I had to disable the mail on error, because it emailed constantly. -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)
On 02/08/2020 12.34, Carlos E. R. wrote:
On 02/08/2020 01.44, David Haller wrote:
Hello,
On Sat, 01 Aug 2020, Carlos E. R. wrote:
I get these repeated warnings in the log of my home server:
...
Well, SMART-over-USB has quirks. Try '-d sat' in addition to '-d removable'. And BTW: '-S on' should only needed once (if ever). So try this instead of above two:
/dev/[..] -d removable -d sat -a -s (S/../.././02|L/../../6/03)
I forgot trying -d sat.
Ok, will see in an hour or two if it works.
It worked :-) -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sunday, 2020-08-02 at 21:07 +0200, Carlos E. R. wrote:
On 02/08/2020 12.34, Carlos E. R. wrote:
On 02/08/2020 01.44, David Haller wrote:
Hello,
On Sat, 01 Aug 2020, Carlos E. R. wrote:
I get these repeated warnings in the log of my home server:
...
Well, SMART-over-USB has quirks. Try '-d sat' in addition to '-d removable'. And BTW: '-S on' should only needed once (if ever). So try this instead of above two:
/dev/[..] -d removable -d sat -a -s (S/../.././02|L/../../6/03)
I forgot trying -d sat.
Ok, will see in an hour or two if it works.
It worked :-)
Problem is back: <3.2> 2020-08-07T04:55:34.474986+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.2> 2020-08-07T05:55:34.453302+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.2> 2020-08-07T06:55:34.433409+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.2> 2020-08-07T15:25:34.211163+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data In detail: <3.6> 2020-08-06T14:25:24.690040+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2020-08-06T14:25:24.690677+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 132 to 130 <3.6> 2020-08-06T14:25:24.700331+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], Read SMART Self-Test Log worked again, warning condition reset after 1 email <3.6> 2020-08-06T14:55:32.262240+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-06T14:55:34.212602+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-06T15:25:25.588123+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2020-08-06T16:25:24.915723+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 130 to 132 <3.6> 2020-08-06T16:55:32.520885+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-06T16:55:34.470781+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-06T17:25:24.740938+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2020-08-06T17:25:24.742328+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 132 to 130 <3.6> 2020-08-06T17:55:32.350427+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-06T17:55:34.300612+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-06T18:25:24.699400+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2020-08-06T18:55:32.330075+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-06T18:55:34.283326+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-06T19:25:25.398939+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2020-08-06T20:25:26.791036+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 130 to 132 <3.6> 2020-08-07T00:25:25.152111+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 132 to 130 <3.6> 2020-08-07T00:55:26.847605+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 130 to 132 <3.6> 2020-08-07T01:55:25.166364+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 132 to 130 <3.6> 2020-08-07T02:25:26.903803+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], starting scheduled Short Self-Test. <3.6> 2020-08-07T02:55:25.878498+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], previous self-test completed without error <3.6> 2020-08-07T04:55:32.424237+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-07T04:55:34.474986+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-07T05:25:24.931335+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2020-08-07T05:55:32.503160+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-07T05:55:34.453302+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-07T06:25:24.900829+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2020-08-07T06:25:24.902800+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 130 to 132 <3.6> 2020-08-07T06:55:32.483636+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-07T06:55:34.433409+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-07T07:25:25.590083+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2020-08-07T12:55:26.989310+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 132 to 130 <3.6> 2020-08-07T15:25:32.261050+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-07T15:25:34.211163+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-07T15:55:25.388782+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2020-08-07T16:25:25.058723+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 130 to 132 <3.6> 2020-08-07T17:25:25.402340+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 132 to 130 <3.6> 2020-08-07T18:25:26.799720+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 130 to 132 <3.6> 2020-08-08T00:55:26.642655+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 132 to 130 Sometimes it works, sometimes it doesn't, and it sends emails. 18 emails per day The configuration line is: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d removable -d sat -a -s (S/../.././02|L/../../6/03) -m root@telcontar.valinor Obviously I'm removing the mail part again. - -- Cheers, Carlos E. R. (from openSUSE 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXy3lrhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfV5WQAnizRevkgT5c43TYRzNdP 8HKEtw+RAJ9B6AMIHWCBVT09zscRDvURxxzOpw== =Gg7f -----END PGP SIGNATURE-----
Hello, On Sat, 08 Aug 2020, Carlos E. R. wrote:
It worked :-)
Problem is back:
<3.2> 2020-08-07T04:55:34.474986+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data [..] The configuration line is:
/dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d removable -d sat -a -s (S/../.././02|L/../../6/03) -m root@telcontar.valinor
Obviously I'm removing the mail part again.
Hm. Try: '-d sat,auto -T permissive' (see 'man 5 smartd.conf')... Otherwise, I'd say that USB-SATA bridge is just b0rked. HTH, -dnh -- Turn right here. No! NO! The OTHER right! -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 08/08/2020 07.49, David Haller wrote:
Hello,
On Sat, 08 Aug 2020, Carlos E. R. wrote:
It worked :-)
Problem is back:
<3.2> 2020-08-07T04:55:34.474986+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data [..] The configuration line is:
/dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d removable -d sat -a -s (S/../.././02|L/../../6/03) -m root@telcontar.valinor
Obviously I'm removing the mail part again.
Hm. Try: '-d sat,auto -T permissive' (see 'man 5 smartd.conf')... Otherwise, I'd say that USB-SATA bridge is just b0rked.
Can't be borked, the disk works fine. I have two units, both do the same thing. Western Digital MyDisk. After I removed the mail thing yesterday, I got only three warnings. Now adding your idea, we'll see tomorrow :-) Huh, no, doesn't like it: <3.6> 2020-08-08T14:25:00.839082+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0, type changed from 'sat,auto' to 'scsi' <3.6> 2020-08-08T14:25:00.840066+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI], opened <3.6> 2020-08-08T14:25:00.840961+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI], [WD My Book 25EE 4004], lu id: 0x500..., S/N: ..., 8.00 TB <3.6> 2020-08-08T14:25:00.841711+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI], IE (SMART) not enabled, skip device <3.6> 2020-08-08T14:25:00.842439+02:00 Isengard smartd 32172 - - Try 'smartctl -s on /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI]' to turn on SMART features <3.2> 2020-08-08T14:25:00.843166+02:00 Isengard smartd 32172 - - Unable to register SCSI device /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI] at line 129 of file /etc/smartd.conf <3.6> 2020-08-08T14:25:00.844022+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI], not available It thinks it is SCSI and fails. I remove the "auto" and it starts. <3.6> 2020-08-08T14:38:18.444291+02:00 Isengard smartd 32653 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], opened <3.6> 2020-08-08T14:38:18.444948+02:00 Isengard smartd 32653 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], WDC WD 80EZAZ-11TDBA0, S/N:..., WWN:5-000..., FW:83.H0A83, 8.00 TB <3.6> 2020-08-08T14:38:18.457927+02:00 Isengard smartd 32653 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], found in smartd database: WDC HGST Ultrastar He10 <3.6> 2020-08-08T14:38:18.467331+02:00 Isengard smartd 32653 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], is SMART capable. Adding to "monitor" list. <3.6> 2020-08-08T14:38:18.468569+02:00 Isengard smartd 32653 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state read from /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state The disk works fine with smartctl, it is smartd which has problems. -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)
Carlos E.R. wrote:
On 08/08/2020 07.49, David Haller wrote:
Hello,
On Sat, 08 Aug 2020, Carlos E. R. wrote:
It worked :-)
Problem is back:
<3.2> 2020-08-07T04:55:34.474986+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data [..] The configuration line is:
/dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d removable -d sat -a -s (S/../.././02|L/../../6/03) -m root@telcontar.valinor
Obviously I'm removing the mail part again.
Hm. Try: '-d sat,auto -T permissive' (see 'man 5 smartd.conf')... Otherwise, I'd say that USB-SATA bridge is just b0rked.
Can't be borked, the disk works fine.
It _could_ still be broken - using SMART ATA commands is not the same as just doing IO.
Huh, no, doesn't like it:
<3.6> 2020-08-08T14:25:00.839082+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0, type changed from 'sat,auto' to 'scsi'
So your change to sata was ignored, presumably because the USB driver presents the drive as SCSI.
<3.6> 2020-08-08T14:25:00.841711+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI], IE (SMART) not enabled, skip device <3.6> 2020-08-08T14:25:00.842439+02:00 Isengard smartd 32172 - - Try 'smartctl -s on /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI]' to turn on SMART features
Did you try that?
The disk works fine with smartctl, it is smartd which has problems.
I wonder if the issue might be your "-d sat" in the config - seen from the kernel, the disk is not a SATA drive, but a SCSI drive. -- Per Jessen, Zürich (29.1°C) http://www.dns24.ch/ - free dynamic DNS, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 08/08/2020 15.47, Per Jessen wrote:
Carlos E.R. wrote:
On 08/08/2020 07.49, David Haller wrote:
Hello,
On Sat, 08 Aug 2020, Carlos E. R. wrote:
It worked :-)
Problem is back:
<3.2> 2020-08-07T04:55:34.474986+02:00 Isengard smartd 18959 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data [..] The configuration line is:
/dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d removable -d sat -a -s (S/../.././02|L/../../6/03) -m root@telcontar.valinor
Obviously I'm removing the mail part again.
Hm. Try: '-d sat,auto -T permissive' (see 'man 5 smartd.conf')... Otherwise, I'd say that USB-SATA bridge is just b0rked.
Can't be borked, the disk works fine.
It _could_ still be broken - using SMART ATA commands is not the same as just doing IO.
I have two units bought on different years, both show the same issue. With smartctl there is no problem, it is with smartd only.
Huh, no, doesn't like it:
<3.6> 2020-08-08T14:25:00.839082+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0, type changed from 'sat,auto' to 'scsi'
So your change to sata was ignored, presumably because the USB driver presents the drive as SCSI.
The reverse.
<3.6> 2020-08-08T14:25:00.841711+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI], IE (SMART) not enabled, skip device <3.6> 2020-08-08T14:25:00.842439+02:00 Isengard smartd 32172 - - Try 'smartctl -s on /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SCSI]' to turn on SMART features
Did you try that?
Yes.
The disk works fine with smartctl, it is smartd which has problems.
I wonder if the issue might be your "-d sat" in the config - seen from the kernel, the disk is not a SATA drive, but a SCSI drive.
I have tried with and without. Same problem. See, I have connected the second disk this time. Config: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -s on -d removable -d sat -T permissive -a -s (S/../.././02|L/../../6/03) /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 -d removable -d sat -a -s (S/../.././02|L/../../6/03) <3.6> 2020-08-08T20:12:48.752675+02:00 Isengard smartd 32653 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2020-08-08T20:12:48.917825+02:00 Isengard smartd 9086 - - File /etc/smartd.conf line 129 (drive /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0): warning, character 1 (o) looks odd in extended regular expression on Line 120 is the first disk above. <3.6> 2020-08-08T20:12:48.918253+02:00 Isengard smartd 9086 - - File /etc/smartd.conf line 129 (drive /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0): ignoring previous Test Directive -s on <3.6> 2020-08-08T20:12:49.799946+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], opened <3.6> 2020-08-08T20:12:49.800413+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], WDC WD80EZAZ-11TDBA0, S/N:2TKST2SD, WWN:5-000cca-26..., FW:83.H0A83, 8.00 TB <3.6> 2020-08-08T20:12:49.813096+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], found in smartd database: WDC HGST Ultrastar He10 <3.6> 2020-08-08T20:12:49.822400+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], is SMART capable. Adding to "monitor" list. <3.6> 2020-08-08T20:12:49.823702+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state read from /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2020-08-08T20:12:49.824274+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], opened <3.6> 2020-08-08T20:12:49.825880+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], WDC WD80EZAZ-11TDBA0, S/N:7HKSUKBJ, WWN:5-000cca-25..., FW:83.H0A83, 8.00 TB <3.6> 2020-08-08T20:12:49.838672+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], found in smartd database: WDC HGST Ultrastar He10 <3.6> 2020-08-08T20:12:49.853064+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], is SMART capable. Adding to "monitor" list. <3.6> 2020-08-08T20:12:49.854560+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], state read from /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-7HKSUKBJ.ata.state <3.6> 2020-08-08T20:12:50.415168+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 141 to 250 <3.6> 2020-08-08T20:12:50.419602+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2020-08-08T20:12:50.420068+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-7HKSUKBJ.ata.state <3.6> 2020-08-08T20:42:58.521194+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-08T20:43:00.471274+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-08T20:43:02.420908+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], Read SMART Self Test Log Failed <3.6> 2020-08-08T20:43:11.536628+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-08T20:43:13.486658+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-08T20:43:15.436411+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], Read SMART Self Test Log Failed <3.6> 2020-08-08T20:43:17.386206+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], Read Summary SMART Error Log failed <3.6> 2020-08-08T20:43:17.386830+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], old test of type L not run at Sat Jul 4 03:00:00 2020 CEST, starting now. <3.2> 2020-08-08T20:43:19.336063+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], not capable of Offline or Self-Testing. <3.6> 2020-08-08T21:12:51.964169+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 250 to 162 <3.6> 2020-08-08T21:42:58.551103+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-08T21:43:00.500978+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-08T21:43:10.933802+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-08T21:43:12.883854+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-08T21:43:14.833631+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], Read SMART Self Test Log Failed <3.6> 2020-08-08T21:43:16.784271+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], Read Summary SMART Error Log failed <3.6> 2020-08-08T22:12:52.396979+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], SMART Prefailure Attribute: 3 Spin_Up_Time changed from 253 to 251 <3.6> 2020-08-08T22:12:52.397599+02:00 Isengard smartd 9086 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 162 to 154 It says it is not self check capable, this is not true, they are both perfectly capable with default settings: Isengard:~ # smartctl --test=short /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.12.14-lp151.28.52-default] (SUSE RPM) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Sat Aug 8 22:48:48 2020 CEST Use smartctl -X to abort test. Isengard:~ # smartctl --test=short /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0\:0 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.12.14-lp151.28.52-default] (SUSE RPM) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Sat Aug 8 22:48:55 2020 CEST Use smartctl -X to abort test. Isengard:~ # And the logs can be read just fine: Isengard:~ # smartctl --log=selftest /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.12.14-lp151.28.52-default] (SUSE RPM) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10205 - # 2 Extended offline Aborted by host 90% 10186 - # 3 Short offline Completed without error 00% 10184 - # 4 Short offline Completed without error 00% 10160 - # 5 Short offline Completed without error 00% 10136 - # 6 Short offline Completed without error 00% 10112 - # 7 Short offline Completed without error 00% 10088 - # 8 Short offline Completed without error 00% 10064 - # 9 Short offline Completed without error 00% 10040 - #10 Short offline Completed without error 00% 10034 - #11 Extended offline Aborted by host 80% 10019 - #12 Short offline Completed without error 00% 10016 - #13 Short offline Completed without error 00% 9992 - #14 Short offline Completed without error 00% 9968 - #15 Short offline Completed without error 00% 9944 - #16 Short offline Completed without error 00% 9920 - #17 Short offline Completed without error 00% 9896 - #18 Short offline Completed without error 00% 9872 - #19 Extended offline Aborted by host 90% 9850 - #20 Short offline Completed without error 00% 9848 - #21 Short offline Completed without error 00% 9824 - Isengard:~ # smartctl --log=selftest /dev/disk/by-id/usb-WD_My_Book_25EE_3 usb-WD_My_Book_25EE_32544B5354325344-0:0 usb-WD_My_Book_25EE_37484B53554B424A-0:0 usb-WD_My_Book_25EE_32544B5354325344-0:0-part1 usb-WD_My_Book_25EE_37484B53554B424A-0:0-part1 Isengard:~ # smartctl --log=selftest /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0\:0 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.12.14-lp151.28.52-default] (SUSE RPM) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5207 - # 2 Short offline Completed without error 00% 5184 - # 3 Short offline Completed without error 00% 5160 - # 4 Short offline Completed without error 00% 5136 - # 5 Short offline Completed without error 00% 5113 - # 6 Short offline Completed without error 00% 5089 - # 7 Short offline Completed without error 00% 5065 - # 8 Short offline Completed without error 00% 5017 - # 9 Short offline Completed without error 00% 4993 - #10 Short offline Completed without error 00% 4969 - #11 Short offline Completed without error 00% 4945 - #12 Short offline Completed without error 00% 4921 - #13 Short offline Completed without error 00% 4897 - #14 Short offline Completed without error 00% 4849 - #15 Short offline Completed without error 00% 4801 - #16 Short offline Completed without error 00% 4777 - #17 Short offline Completed without error 00% 4729 - #18 Short offline Completed without error 00% 4681 - #19 Short offline Completed without error 00% 4658 - #20 Short offline Completed without error 00% 4634 - #21 Short offline Completed without error 00% 4586 - Isengard:~ # Isengard:~ # smartctl --scan-open /dev/sda -d sat # /dev/sda [SAT], ATA device /dev/sdb -d sat # /dev/sdb [SAT], ATA device /dev/sdc -d sat # /dev/sdc [SAT], ATA device /dev/sdd -d sat # /dev/sdd [SAT], ATA device /dev/sde -d sat # /dev/sde [SAT], ATA device /dev/sdf -d sat # /dev/sdf [SAT], ATA device Isengard:~ # It is some problem with smartd, and I had it for years. Since I bought some disks it doesn't like. Then, one year the software gets an update and one disk that failed then works. It is a software problem in the daemon. I'm testing now: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -s on -d removable -d sat,12 -T permissive -a -s (S/../.././02|L/../../6/03) /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 -d removable -d sat,16 -T permissive -T permissive -T permissive -T permissive -a -s (S/../.././02|L/../../6/03) I tried "verypermissive", which is listed in the man page, but it complains: Aug 08 23:06:12 Isengard smartd[13611]: File /etc/smartd.conf line 137 (drive /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0): Invalid argument to -T Directive: verypermissive -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)
On 08/08/2020 23.10, Carlos E. R. wrote:
On 08/08/2020 15.47, Per Jessen wrote:
Carlos E.R. wrote:
On 08/08/2020 07.49, David Haller wrote:
...
It is some problem with smartd, and I had it for years. Since I bought some disks it doesn't like. Then, one year the software gets an update and one disk that failed then works. It is a software problem in the daemon.
I'm testing now:
/dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -s on -d removable -d sat,12 -T permissive -a -s (S/../.././02|L/../../6/03)
/dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 -d removable -d sat,16 -T permissive -T permissive -T permissive -T permissive -a -s (S/../.././02|L/../../6/03)
I tried "verypermissive", which is listed in the man page, but it complains:
Aug 08 23:06:12 Isengard smartd[13611]: File /etc/smartd.conf line 137 (drive /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0): Invalid argument to -T Directive: verypermissive
/dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -s on -d removable -d sat,12 -T permissive -a -s (S/../.././02|L/../../6/03) /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 -d removable -d sat,16 -T permissive -T permissive -T permissive -T permissive -a -s (S/../.././02|L/ grep My_Book /var/log/messages | less <3.6> 2020-08-08T23:08:24.362845+02:00 Isengard smartd 13663 - - File /etc/smartd.conf line 129 (drive /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0): warning, character 1 (o) looks odd in extended regular expression on <3.6> 2020-08-08T23:08:24.363748+02:00 Isengard smartd 13663 - - File /etc/smartd.conf line 129 (drive /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0): ignoring previous Test Directive -s on <3.6> 2020-08-08T23:08:25.261652+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], opened <3.6> 2020-08-08T23:08:25.262178+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], WDC WD80EZAZ-11TDBA0, S/N:2TKST2SD, WWN:5-..., FW:83.H0A83, 8.00 TB <3.6> 2020-08-08T23:08:25.274823+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], found in smartd database: WDC HGST Ultrastar He10 <3.6> 2020-08-08T23:08:25.300774+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], is SMART capable. Adding to "monitor" list. <3.6> 2020-08-08T23:08:25.302176+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state read from /var/lib/smartmontools/smartd.WDC_WD80EZAZ....ata.state <3.6> 2020-08-08T23:08:25.303004+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], opened <3.6> 2020-08-08T23:08:25.303840+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], WDC WD80EZAZ-11TDBA0, S/N:7HKSUKBJ, WWN:5-..., FW:83.H0A83, 8.00 TB <3.6> 2020-08-08T23:08:25.316372+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], found in smartd database: WDC HGST Ultrastar He10 <3.6> 2020-08-08T23:08:25.336885+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], is SMART capable. Adding to "monitor" list. <3.6> 2020-08-08T23:08:25.338318+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], state read from /var/lib/smartmontools/smartd.WDC_WD8...BJ.ata.state <3.6> 2020-08-08T23:08:25.960333+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD...SD.ata.state <3.6> 2020-08-08T23:08:25.961091+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD8...BJ.ata.state <3.6> 2020-08-08T23:38:33.780662+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-08T23:38:35.730568+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-08T23:38:37.680316+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], Read SMART Self Test Log Failed <3.6> 2020-08-08T23:38:46.498530+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], not capable of SMART self-check <3.2> 2020-08-08T23:38:48.448248+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2020-08-08T23:38:50.398066+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], Read SMART Self Test Log Failed <3.6> 2020-08-08T23:38:52.347999+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], Read Summary SMART Error Log failed <3.6> 2020-08-09T00:08:25.991349+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 132 to 130 <3.6> 2020-08-09T00:08:26.952448+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_37484B53554B424A-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 144 to 151 <3.6> 2020-08-09T00:38:33.558901+02:00 Isengard smartd 13663 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check As you can see, both disks fail. They can't be both "borked". Then sometimes it logs temperature change. The problem is smartd itself. smartctl copes fine. -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)
Carlos E. R. wrote:
With smartctl there is no problem, it is with smartd only.
So presumably a config issue.
Huh, no, doesn't like it:
<3.6> 2020-08-08T14:25:00.839082+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0, type changed from 'sat,auto' to 'scsi'
So your change to sata was ignored, presumably because the USB driver presents the drive as SCSI.
The reverse.
The way I read the above "type changed from 'sat,auto' to 'scsi'" is that the type was changed from 'sat,auto' to 'scsi' ?
The disk works fine with smartctl, it is smartd which has problems.
I wonder if the issue might be your "-d sat" in the config - seen from the kernel, the disk is not a SATA drive, but a SCSI drive.
I have tried with and without. Same problem.
Hmm. Maybe its a problem to bring up on the smartmontools list? -- Per Jessen, Zürich (29.9°C) http://www.cloudsuisse.com/ - your owncloud, hosted in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 09/08/2020 18.44, Per Jessen wrote:
Carlos E. R. wrote:
With smartctl there is no problem, it is with smartd only.
So presumably a config issue.
Maybe, but what? That's what I hoped, but I'm out of ideas.
Huh, no, doesn't like it:
<3.6> 2020-08-08T14:25:00.839082+02:00 Isengard smartd 32172 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0, type changed from 'sat,auto' to 'scsi'
So your change to sata was ignored, presumably because the USB driver presents the drive as SCSI.
The reverse.
The way I read the above "type changed from 'sat,auto' to 'scsi'" is that the type was changed from 'sat,auto' to 'scsi' ?
I did not change to sata, I changed to "sata, auto". It should have kept the sata part, not tried scssi, IMHO.
The disk works fine with smartctl, it is smartd which has problems.
I wonder if the issue might be your "-d sat" in the config - seen from the kernel, the disk is not a SATA drive, but a SCSI drive.
I have tried with and without. Same problem.
Hmm. Maybe its a problem to bring up on the smartmontools list?
I tried, years ago. Dead silence. -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)
participants (4)
-
Carlos E. R. -
Carlos E.R. -
David Haller -
Per Jessen