Hi, I am using SUSE13.1 machine. I am working with a company where I need to connect to their network using VPN. I am able to connect to the links they gave to connect using VPN. Now the problem is, when I am getting connected through VPN, I am not able to access any public url other than their URLs. All connection are getting disconnected. I asked Network team, they said the issue is with my settings. How can I debug this problem and fix it ? When connected to VPN, below is what I am seeing : ========= linux-wzza:/home/arup # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.10.146.18 0.0.0.0 UG 0 0 0 tun0 10.10.146.18 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 10.11.12.1 10.10.146.18 255.255.255.255 UGH 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 9 0 0 wlp2s0 192.168.101.0 10.10.146.18 255.255.255.0 UG 0 0 0 tun0 208.65.136.10 192.168.1.1 255.255.255.255 UGH 0 0 0 wlp2s0 208.65.140.0 10.10.146.18 255.255.252.0 UG 0 0 0 tun0 linux-wzza:/home/arup # =========== After running each command, I waited 1 min. But got no output, so cancelled by Ctrl + c and tried next : [arup@~]$ ping mother.iexposure.com PING mother.iexposure.com (192.168.101.2) 56(84) bytes of data. ^C --- mother.iexposure.com ping statistics --- 42 packets transmitted, 0 received, 100% packet loss, time 41327ms [arup@~]$ ping 192.168.101.2 PING 192.168.101.2 (192.168.101.2) 56(84) bytes of data. ^C --- 192.168.101.2 ping statistics --- 86 packets transmitted, 0 received, 100% packet loss, time 85004ms [arup@~]$ ping google.com PING google.com (216.58.196.110) 56(84) bytes of data. ^C --- google.com ping statistics --- 60 packets transmitted, 0 received, 100% packet loss, time 59442ms [arup@~]$ ping 216.58.216.206 PING 216.58.216.206 (216.58.216.206) 56(84) bytes of data. ^C --- 216.58.216.206 ping statistics --- 44 packets transmitted, 0 received, 100% packet loss, time 43344ms [arup@~]$ Please help me. -- ================ Regards, Arup Rakshit ================ Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it. --Brian Kernighan -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org