On Tuesday 09 January 2007 03:56, Eberhard Roloff wrote:
w83627thf-isa-0290 Adapter: ISA adapter VCore: +1.60 V (min = +0.00 V, max = +3.84 V) +12V: +12.28 V (min = +7.78 V, max = +0.00 V) ALARM +3.3V: +3.36 V (min = +0.42 V, max = +0.74 V) ALARM +5V: +5.04 V (min = +3.65 V, max = +4.56 V) ALARM -12V: +6.06 V (min = +0.14 V, max = -12.20 V) ALARM V5SB: +5.08 V (min = +0.97 V, max = +1.02 V) ALARM VBat: +0.16 V (min = +2.56 V, max = +1.17 V) ALARM fan1: 0 RPM (min = -1 RPM, div = 128) ALARM CPU Fan: 2872 RPM (min = -1 RPM, div = 2) ALARM fan3: 0 RPM (min = 292 RPM, div = 128) ALARM M/B Temp: +32°C (high = +65°C, hyst = +0°C) sensor = thermistor CPU Temp: +25.5°C (high = +80°C, hyst = +75°C) sensor = thermistor temp3: -48.0°C (high = +80°C, hyst = +75°C) sensor = thermistor vid: +1.525 V (VRM Version 9.0) alarms: beep_enable: ### end of sensors output ###
It seems that your /etc/sensors.conf needs some work. This is result of mine after editing conf file: w83697hf-isa-0290 Adapter: ISA adapter VCore: +1.70 V (min = +1.60 V, max = +1.76 V) +3.3V: +3.25 V (min = +3.14 V, max = +3.47 V) +5V: +4.84 V (min = +4.76 V, max = +5.24 V) +12V: +11.55 V (min = +10.82 V, max = +13.19 V) -12V: -12.28 V (min = -13.18 V, max = -10.80 V) -5V: -5.05 V (min = -5.25 V, max = -4.75 V) V5SB: +5.40 V (min = +4.49 V, max = +5.51 V) VBat: +3.31 V (min = +2.40 V, max = +3.60 V) CPU fan: 3183 RPM (min = 2636 RPM, div = 8) Case: +33°C (high = +40°C, hyst = +37°C) sensor = thermistor CPU temp: +60.5°C (high = +70°C, hyst = +67°C) sensor = diode (beep) You can't see ALARM in almost every row. -- Regards, Rajko. http://en.opensuse.org/Portal -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org