firewall-1 /etc/resolve.conf:
domain mmcable.com
nameserver 24.94.227.33
nameserver 24.94.227.32
search mmcable.com
---
I have also tried it without any settings in here (as it was initially). but, that didn't work either.
Firewall-1 route -n:
destination gateway genmask flags metric ref use_iface
192.168.0.0 0.0.0.0 255.255.255.0 u 0 0 0 eth1
24.27.146.0 0.0.0.0 255.255.254.0 u 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 u 0 0 0 lo
0.0.0.0 24.27.146.1 0.0.0.0 u 0 0 0 eth0
===
Linux-1 /etc/resolve.conf:
# generated by suse.config do not edit #
search local
---
Linux-1 route -n:
destination gateway genmask flags metric ref use_iface
192.168.0.0 0.0.0.0 255.255.255.0 u 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 ug 0 0 0 eth0
thank you.
: -----Original Message-----
: From: kbb0927@cs.com [mailto:kbb0927@cs.com]
: Sent: Monday, August 13, 2001 12:19 PM
: To: suse-linux-e@suse.com
: Subject: RE: [SLE] ip masquerading: internal ping each other but not
: internet
:
:
: What does your /etc/resolv.conf show?
: What does route -n give?
:
: Regards,
:
: Keith
:
: "jeric" wrote:
:
: >I have 3 machines: firewall-1, linux-1, and win2k-1. linux-1
: and win2k-1 can ping each other and can ping firewall eth1 (local
: IP 192.168.0.1) and firewall-1 eth0 (cable modem IP, DHCP). But,
: linux-1 and win2k-1 cannot ping the internet (i have tried
: www.google.com and 216.239.35.100, neither work)
: >On firewall-1 I have tried it with the firewall off too, but the
: same thing happens. I have a default install of SuSE pro 7.0 on
: firewall-1 and i have made the following changes in /etc/rc.config:
: >
: >ip_forward= yes->no
: >permission_security= easy local -> secure local
: >passwd_use_cracklib= no->yes
: >start_pcmcia= yes->no (its a desktop)
: >start_httpd= yes->no
: >start_portmap= yes->no
: >check_inittab= yes->no
: >fqhostname= linux.local -> newname.local (and i tried just 'newname')
: >
: >I tried the following both on and off, neither worked:
: >
: >start_named= no->yes :when this was set to yes (i tried it
: both ways) i also had the following:
: > nameserver= "" -> 1.2.3.4 2.3.4.5 5.6.7.8 (they were the
: 3 DNS server ip's from my cable provider)
: > searchlist= local -> myisp.com
: >
: >
: >For firewall-1 /etc/rc.config.d/rc.firewall.config i set the following:
: >
: >2(int) eth0
: >3(world) eth1
: >5(route) yes
: >6(masq) yes
: >12(dhclient) yes
: >-the rest are the defaults
: >
: >On Linux-1 i set the ip address for static local (192.168.0.2)
: and a default install with office. no changes to rc.config
: except what yast changed when i set up the NIC.
: >
: >On win2k-1 i set the ip (192.168.0.3) mask (255.255.255.0) and
: gateway (192.168.0.1 -firewall-1 eth1)
: >
: >i have the wiring as follows:
: >cable modem -> firewall-1 eth0 | firewall-1 eth1 -> switch ->
: linux-1 eth0
: > ... switch -> win2k-1
: >
: >I have tried with and without DNS set up on the firewall-1 box,
: but neither way made any changes. can someone pleas help? what
: do i need to do to get the internal to see the internet? I have
: done alot of searching on the internet, but most was how to do it
: without SuSEfirewal and without other SuSE config options.
: >
: >thanks in advance.
: >
:
: --
: To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com
: For additional commands send e-mail to suse-linux-e-help@suse.com
:
: Also check the FAQ at http://www.suse.com/support/faq and the
: archives at http://lists.suse.com
:
: