On Sun, 2017-06-18 at 20:11 -0500, Doug wrote:
On 06/18/2017 07:47 PM, Mark Misulich wrote:
In PCLOS, there is a file, /etc/sane.d/dll.conf. In it there are two entries for Epson. It is necessary to COMMENT OUT epson and comment in epson2. Don't know if that's the problem in your system, but at least look and see. (A # in front of the line comments it out. Remove the # from in front of epson2.)
--doug
Thanks Doug, I tried your suggestion of uncommenting Epson2, but it only added another driver to the list in the Yast Scanner configuration window showing that it didn't recognize the scanner. I then re-commented Epson2 and uncommented Epson. Same result. I looked for epkowa in the list to see if I could uncomment it, but there is no epkowa listed in /etc/sane.d/dll.conf. I looked around in /etc/sane.d and found /etc/sane.d/epkowa.conf Here is what I found in it: # For any USB scanner not known to the backend (yet), you may, at your # own peril(!!), force the backend to recognise and use it via libusb. # You can do so by the following configuration command: # # usb <USB vendor ID> <USB product ID> # # SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes). In order # to find the USB product ID, use lsusb(1). # A sample configuration for the Epson Perfection 1650 (Epson GT-8200), # which has a product ID of 0x0110, would look as follows: # #usb 0x04b8 0x0110 I used lsusb to find this Bus 001 Device 007: ID 04b8:0130 Seiko Epson Corp. GT-X770 [Perfection V500] I added this line to the epkowa.conf usb 0x04b8 0x0130 Now in the Yast Scanner Configuration window, I get Driver Scanner epkowa Epson (unknown model) at epkowa:usb:001:007 Not Configured EPSON Scanner USB scanner (vendor=0x04b8[EPSON], product=0x0130 [EPSON Scanner]) at libusb:001:007 Then I added this to the dll.conf epkowa I got the same result in the Yast Scanner Configuration window as above. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org