On Sun, 2006-07-16 at 15:48 -0400, James Knott wrote:
Hans du Plooy wrote:
Hi guys,
I wanted to replace molex connectors on a power supply, ripped them off, and then realised I didn't mark which black goes where (there are two). Does it matter or are they interchangeable?
Yes. ;-)
They should be the same. The safest way to find out, is to use an ohm meter or continuity tester to verify. If you hook them up wrong you'll let all the smoke out, when you turn the power on. If the smoke escapes, the power supply won't work. ;-)
Confirming my theory that everything electronic is driven by smoke. If the smoke comes out, it's broken. Seriously. I have a multimeter with a "buzz" setting. If you hook it up to two points and you get a buzz, there's a path for current to flow. Thinking that if I get a buzz by hooking up both black wires, I tried and got a buzz alright, but I also gut a buzz on any combination of the four wires I tried. Testing volts or amps requires the power supply to be on and the connectors to be plugged in to something. So what I do hook the meter up to test ohms? My memory of electronics is a bit hazy... Thanks Hans -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com