Am Freitag 24 Juni 2011 11:02:27 schrieb Martin Schröder:
Am 24. Juni 2011 10:49 schrieb Heinz Dittmar
: Hat jemand eine Idee. ???
Hardwarefehler. Überprüf mal die Festplatte... Da ich ich jetzt mal auch sonst einen dbus error bekommen habe, testete ich mal die Festplatte mit : smartctl --test=long /dev/sda Hier das Ergebnis: smartctl -a /dev/sda smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE RPM) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA family Device Model: WDC WD3200BEVT-22ZCT0 Serial Number: WD-WXE608LU2859 Firmware Version: 11.01A11 User Capacity: 320.072.933.376 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jun 27 09:52:35 2011 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (10380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 122) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1 3 Spin_Up_Time 0x0027 187 185 021 Pre-fail Always - 1641 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1588 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 19315 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1563 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 179 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 701437 194 Temperature_Celsius 0x0022 103 092 000 Old_age Always - 44 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always - 12 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 5485 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5485 occurred at disk power-on lifetime: 18713 hours (779 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 08 ae 22 65 e0 Error: AMNF 8 sectors at LBA = 0x006522ae = 6628014 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ae 22 65 1f 00 03:42:33.843 READ DMA EXT ef 10 02 00 00 00 00 00 03:42:33.843 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 03:42:33.843 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 03:42:33.840 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 03:42:33.839 SET FEATURES [Set transfer mode] Error 5484 occurred at disk power-on lifetime: 18713 hours (779 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 ae 22 65 e0 Error: UNC 8 sectors at LBA = 0x006522ae = 6628014 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ae 22 65 1f 00 03:42:30.750 READ DMA EXT ef 10 02 00 00 00 00 00 03:42:30.750 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 03:42:30.750 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 03:42:30.747 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 03:42:30.746 SET FEATURES [Set transfer mode] Error 5483 occurred at disk power-on lifetime: 18713 hours (779 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 ae 22 65 e0 Error: UNC 8 sectors at LBA = 0x006522ae = 6628014 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ae 22 65 1f 00 03:42:27.789 READ DMA EXT ef 10 02 00 00 00 00 00 03:42:27.789 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 03:42:27.789 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 03:42:27.785 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 03:42:27.785 SET FEATURES [Set transfer mode] Error 5482 occurred at disk power-on lifetime: 18713 hours (779 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 ae 22 65 e0 Error: UNC 8 sectors at LBA = 0x006522ae = 6628014 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ae 22 65 1f 00 03:42:24.552 READ DMA EXT ef 10 02 00 00 00 00 00 03:42:24.552 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 03:42:24.552 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 03:42:24.549 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 03:42:24.548 SET FEATURES [Set transfer mode] Error 5481 occurred at disk power-on lifetime: 18713 hours (779 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 ae 22 65 e0 Error: UNC 8 sectors at LBA = 0x006522ae = 6628014 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ae 22 65 1f 00 03:42:21.588 READ DMA EXT ef 10 02 00 00 00 00 00 03:42:21.588 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 03:42:21.588 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 03:42:21.584 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 03:42:21.584 SET FEATURES [Set transfer mode] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 19299 526270993 # 2 Short offline Completed: read failure 90% 19299 526270993 # 3 Extended offline Aborted by host 90% 19299 - # 4 Extended offline Aborted by host 90% 19299 - # 5 Extended offline Completed: read failure 90% 10270 295890764 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Liegt es nun an der Festplatte oder nicht. ??? Viele Grüße, Heinz Dittmar -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org