Hallo! Ich hab mir einen USB Ethernet Adapter von CMC gekauft. Auf der Unterseite steht UE-100. Unter Windows 2000 lief der Adapter mit einem Treiber aus dem Internet einwandfrei. Leider stand da nix von Linux. Wenn ich den Adapter in den USB Port stecke, piept er ein paar mal und schreibt folgendes in die /var/log/messages: [...] Dec 30 23:58:19 (none) kernel: hub.c: USB new device connect on bus1/2, assigned device number 10 Dec 30 23:58:19 (none) kernel: kaweth.c: Kawasaki Device Probe (Device number:10): 0x05e9:0x0008:0x0008 Dec 30 23:58:19 (none) kernel: kaweth.c: Device at c6103e00 Dec 30 23:58:19 (none) kernel: kaweth.c: Descriptor length: 12 type: 1 Dec 30 23:58:19 (none) kernel: kaweth.c: Resetting. Dec 30 23:58:19 (none) kernel: kaweth.c: kaweth_reset(c7a4a000) Dec 30 23:58:19 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:19 (none) kernel: kaweth.c: kaweth_reset() returns 0. Dec 30 23:58:19 (none) kernel: kaweth.c: Downloading firmware... Dec 30 23:58:19 (none) kernel: kaweth.c: High: 12, Low:197 Dec 30 23:58:19 (none) kernel: kaweth.c: Downloading firmware at c32b2500 to kaweth device at c7a4a000 Dec 30 23:58:19 (none) kernel: kaweth.c: Firmware length: 3276 Dec 30 23:58:19 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:19 (none) kernel: kaweth.c: High: 2, Low:103 Dec 30 23:58:19 (none) kernel: kaweth.c: Downloading firmware at c32b31e0 to kaweth device at c7a4a000 Dec 30 23:58:19 (none) kernel: kaweth.c: Firmware length: 622 Dec 30 23:58:19 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:19 (none) kernel: kaweth.c: High: 0, Low:175 Dec 30 23:58:19 (none) kernel: kaweth.c: Downloading firmware at c32b2420 to kaweth device at c7a4a000 Dec 30 23:58:19 (none) kernel: kaweth.c: Firmware length: 182 Dec 30 23:58:19 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:19 (none) kernel: kaweth.c: High: 0, Low:15 Dec 30 23:58:19 (none) kernel: kaweth.c: Downloading firmware at c32b24d6 to kaweth device at c7a4a000 Dec 30 23:58:19 (none) kernel: kaweth.c: Firmware length: 22 Dec 30 23:58:19 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:19 (none) kernel: kaweth.c: Triggering firmware Dec 30 23:58:19 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:19 (none) kernel: kaweth.c: Firmware loaded. I'll be back... Dec 30 23:58:19 (none) kernel: usb.c: USB device 10 (vend/prod 0x5e9/0x8) is not claimed by any active driver. Dec 30 23:58:20 (none) kernel: usb.c: USB disconnect on device 10 Dec 30 23:58:25 (none) kernel: hub.c: USB new device connect on bus1/2, assigned device number 11 Dec 30 23:58:25 (none) kernel: kaweth.c: Kawasaki Device Probe (Device number:11): 0x05e9:0x0008:0x0208 Dec 30 23:58:25 (none) kernel: kaweth.c: Device at c1329400 Dec 30 23:58:25 (none) kernel: kaweth.c: Descriptor length: 12 type: 1 Dec 30 23:58:25 (none) kernel: kaweth.c: Resetting. Dec 30 23:58:25 (none) kernel: kaweth.c: kaweth_reset(c9980000) Dec 30 23:58:25 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:25 (none) kernel: kaweth.c: kaweth_reset() returns 0. Dec 30 23:58:25 (none) kernel: kaweth.c: Firmware present in device. Dec 30 23:58:25 (none) kernel: kaweth.c: Reading kaweth configuration Dec 30 23:58:25 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:25 (none) kernel: kaweth.c: Statistics collection: 13fbffff Dec 30 23:58:25 (none) kernel: kaweth.c: Multicast filter limit: 80 Dec 30 23:58:25 (none) kernel: kaweth.c: MTU: 1514 Dec 30 23:58:25 (none) kernel: kaweth.c: Read MAC address 00:50:5b:00:04:4c Dec 30 23:58:25 (none) kernel: kaweth.c: Setting URB size to 1664 Dec 30 23:58:25 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:25 (none) kernel: kaweth.c: Set SOFS wait to 5 Dec 30 23:58:25 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:25 (none) kernel: kaweth.c: Set receive filter to 28 Dec 30 23:58:25 (none) kernel: kaweth.c: kaweth_control() Dec 30 23:58:25 (none) kernel: kaweth.c: Initializing net device. Dec 30 23:58:25 (none) kernel: kaweth.c: kaweth interface created at eth2 Dec 30 23:58:25 (none) kernel: kaweth.c: Kaweth probe returning. Dec 30 23:58:25 (none) /etc/hotplug/net.agent[20639]: Using HW description eth-usb-1-8 Dec 30 23:58:26 (none) /etc/hotplug/net.agent[20639]: ifup: No configuration found for eth-usb-1-8 eth2 Dec 30 23:58:26 (none) ifup: No configuration found for eth-usb-1-8 eth2 Dec 30 23:58:28 (none) /etc/hotplug/usb.agent[20590]: writing usb-1-10 to /var/run/hotplug/net Dec 30 23:58:32 (none) /etc/hotplug/usb.agent[20686]: writing usb-1-11 to /var/run/hotplug/net [...] Was heisst das alles? Dass er keinen passenden Treiber findet? Was ist dann mit "kaweth.c"? Was kann ich tun um das Ding zum laufen zu bewegen? Ich brauche den Adapter um eine Netzwerkkarte zu sparen, da das Board (VIA EPIA 800) nur einen hat (oder mit Riser Card 2). ./usbview sagt: USB-Ethernet Manufacturer: Kawasaki LSI Inc. Serial Number: 00505B00044C Speed: 12Mb/s (full) USB Version: 1.00 Device Class: 00(>ifc ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 8 Number of Configurations: 1 Vendor Id: 05e9 Product Id: 0008 Revision Number: 2.08 Config Number: 1 Number of Interfaces: 1 Attributes: 80 MaxPower Needed: 90mA Interface Number: 0 Name: kaweth [...] Danke schonmal für jede Hilfe, Gruss, Matthias