September 2011 - Radeon HD - openSUSE Mailing Lists

[Bug 25218] New: TV/EDID strangeness
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=25218 Summary: TV/EDID strangeness Product: xorg Version: 7.4 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: joy+freedesktop(a)entuzijast.net QAContact: xorg-team(a)lists.x.org Hi, I've got a Thinkpad T400 (the same one described previously in bug 22279 :) with a Mobility Radeon HD 3400. When I run Windows (Vista) and plug in my Sony TV into the VGA port on the laptop, that driver notices that something's been plugged in and responds by sending over a normal picture to it, max resolution 1360x768. However, the Linux driver doesn't seem to get it. xrandr consistently shows that VGA_1 is "disconnected". I can force it, with a script like this: xrandr --output VGA_1 --off xrandr --prop xrandr --output VGA_1 --auto xrandr --newmode 1360x768_60.00 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync xrandr --addmode VGA_1 1360x768_60.00 xrandr --output VGA_1 --mode 1360x768_60.00 xrandr --output VGA_1 --left-of PANEL xrandr --prop I often have to run this script several times before it catches on. Eventually however it works, and then the card starts sending output via VGA out. If I run xrandr --prop, it *occasionally* reports: VGA_1 connected 1360x768+0+0 (normal left inverted right x axis y axis) 1600mm x 900mm EDID_DATA: 00ffffffffffff004dd900ff01010101 1412010308a05a780a0dc9a057479827 12484c21080081800101010101010101 010101010101662150b051001b304070 360040846300001e0e1f008051001e30 4080370040846300001c000000fd0039 3f1e3109000a202020202020000000fc 00534f4e592054560a2020202020005a _PanningArea: _OutputNumber: 3 (0x00000003) ConnectorNumber: 3 (0x00000003) ConnectorType: VGA SignalFormat: VGA supported: VGA 1360x768 60.0 + 60.0 1280x768 59.9 1024x768 60.0 800x600 60.3 640x480 60.0 1360x768_60.00 59.8* Other times, it's just: VGA_1 disconnected (normal left inverted right x axis y axis) _PanningArea: _OutputNumber: 3 (0x00000003) ConnectorNumber: 3 (0x00000003) ConnectorType: VGA SignalFormat: VGA supported: VGA 1360x768_60.00 59.8 In any case, once the picture is turned on, it looks like the driver continues to have some kind of a problem - the picture flickers and keeps getting readjusted, and the Xorg and xfdesktop processes start eating a lot of CPU. I then proceed to run: xrandr --output VGA_1 --preferred and xrandr --prop a few more times, and eventually everything settles down, and I get 1360x768 on the other screen. Please help :) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 25330] New: black screen, radeonhd 1.3.0, ext. monitor
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=25330 Summary: black screen, radeonhd 1.3.0, ext. monitor Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: c.schostok(a)yahoo.de QAContact: xorg-team(a)lists.x.org I have a laptop with X1350 and an external SyncMaster T240 with 1920x1200 connected via DVI. Using the proposed standard xorg.conf from http://www.x.org/wiki/radeonhd all monitors are black, no response or restart of X server possible. When I delete xorg.conf, the X server starts both monitors work with the execption that the external cannot be switched to its native resolution and the "radeon" (kernel?) driver is loaded. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 6

[Bug 21231] New: X1250/RS690: Display connected to HDMI gets no signal
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21231 Summary: X1250/RS690: Display connected to HDMI gets no signal Product: xorg Version: 7.3 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: philipp.neubeck(a)gmx.de QAContact: xorg-team(a)lists.x.org Created an attachment (id=24876) --> (http://bugs.freedesktop.org/attachment.cgi?id=24876) /var/log/Xorg.0.log Hardware: Gigabyte GA-MA69GM-S2H with IGP Radeon X1250 lspci output: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690 [Radeon X1200 Series] Two displays connected: Normal LCD Display connected to VGA and is working. LCD-TV connected to HDMI and does not show anything, i.e. it seems not to get any signal. Yet, the software seems to think, that the display is enabled, because I can move the mouse on the second monitor (of course, i cannot see it there anymore). MS Windows can use both displays correctly and some version of fglrx worked, too. I used the following xrandr command: xrandr --output DVI-D_1 --crtc 1 --mode 1024x768 --right-of VGA_1 and the attached xorg.conf. output of xrandr --verbose and the xorg.log are attached. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 6

[Bug 21896] New: window scroll & move without hw acellaration (rhd-1.2.5)
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21896 Summary: window scroll & move without hw acellaration (rhd-1.2.5) Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: estellnb(a)gmail.com QAContact: xorg-team(a)lists.x.org Moving and Scrolling windows was extremely slow with radeonhd-1.2.5_20090506-4be5f71-5.5/-3.1 as if there was no hw accellaration at all. A downgrade has resolved this. used xorg-x11-server-7.4-17.4.1, unichrome-20081229-5.1; distro method: opensuse build service -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 38

[Bug 23217] New: X1400 sometimes flickering when switching to console
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23217 Summary: X1400 sometimes flickering when switching to console Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: radeonhd(a)jenslody.de QAContact: xorg-team(a)lists.x.org Created an attachment (id=28439) --> (http://bugs.freedesktop.org/attachment.cgi?id=28439) Xorg.0.log Since the first version of radeonhd that works for my X1400 on Dell Inspiron 9400 (October 2007), I sometimes get a flickering panel when switching to a console. It does not make any difference whether I use pure text-mode- or a framebuffer-console. It looks a little bit like a crt that is not synchronized. Switching to X and back to console helps, even if I sometimes have to switch more than one time. I uploaded a (short, ugly) video to my server: http://apt.jenslody.de/images/flicker.mpg If I run xserver with -logverbose 7, there are only two differences between a "good" and a "bad" switch to console: --- X_to_console.godd 2009-08-08 11:50:37.000000000 +0200 +++ X_to_console.bad 2009-08-08 11:48:09.000000000 +0200 @@ -9,13 +9,14 @@ (II) RADEONHD(0): FUNCTION: RHDMCIdleWait (II) RADEONHD(0): FUNCTION: rhdRestore (II) RADEONHD(0): FUNCTION: RHDMCRestore +(EE) RADEONHD(0): RHDMCRestore: MC is still not idle!!! (II) RADEONHD(0): FUNCTION: rhdRestoreCursor (II) RADEONHD(0): FUNCTION: restoreCursor (II) RADEONHD(0): FUNCTION: RHDPLLsRestore (II) RADEONHD(0): FUNCTION: R500PLL1Restore (II) RADEONHD(0): FUNCTION: R500PLL1SetLow (II) RADEONHD(0): FUNCTION: PLL1Calibrate -(II) RADEONHD(0): PLL1Calibrate: lock in 147 loops +(II) RADEONHD(0): PLL1Calibrate: lock in 183 loops (II) RADEONHD(0): FUNCTION: R500PLL2Restore (II) RADEONHD(0): FUNCTION: R500PLL2Power (II) RADEONHD(0): FUNCTION: RHDLUTsRestore I always use latest git-sources. I adapted parts of the RHDMCIdleWait and include it in RHDMCRestore to give the rhdMC struct a better chance to be restored: diff --git a/src/rhd_mc.c b/src/rhd_mc.c index def871b..2525050 100644 --- a/src/rhd_mc.c +++ b/src/rhd_mc.c @@ -678,9 +678,19 @@ RHDMCRestore(RHDPtr rhdPtr) return; } - if (MC->Idle(MC)) - MC->Restore(MC); - else + CARD32 count = 1000; + do { + if (MC->Idle(MC)) + { + MC->Restore(MC); + return; + } + usleep(1000); + } while (count--); + +// if (MC->Idle(MC)) +// MC->Restore(MC); +// else xf86DrvMsg(rhdPtr->scrnIndex, X_ERROR, "%s: MC is still not idle!!!\n", __func__); } The error is not gone away, even if the "MC is still not idle!!!" error-message no longer occurs, so I think (hope) the memorycontroller gets restored. Jens -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 2

[Bug 20628] New: sudden change of resolution to 320x200
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=20628 Summary: sudden change of resolution to 320x200 Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: critical Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: estellnb(a)gmail.com QAContact: xorg-team(a)lists.x.org Suddenly while playing a video with mplayer the screen resolution has changed from 1920x1200 - 1920x1200, xinerama to 320x200 - 320x200, clone mode at pressing Ctrl-C. Reconfiguring the screen with xrandr failed. Had to restart the X server. The bug is so far non reproducible. However I have posted the available log files. > xrandr --output DVI-D_1 --off xrandr: Configure crtc 0 failed > xrandr --output DVI-D_1 --right-of PANEL xrandr: Configure crtc 0 failed > xrandr --output DVI-D_1 --mode 1920x1200 xrandr: Configure crtc 0 failed -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 10

[Bug 20624] New: Problems with 1920x1200 resolution on dual screen
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=20624 Summary: Problems with 1920x1200 resolution on dual screen Product: xorg Version: 7.4 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: major Priority: high Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: piotr.kral(a)gmail.com QAContact: xorg-team(a)lists.x.org I have Thinkpad T60 with Radeon x1400. It's native screen resolution is 1400x1040, but at work I connect it to external monitor Belinea 2485 S1W with native resolution 1920x1200 via d-sub. when I set resolution of external monitor to 1920x1200 the monitor shows resolution 1600x1200 and the desktop has no left part. I'm forced to use 1600x1200 resolution to see all desktop. The effect was on Fedora 9 and after upgrade to Fedora 10 it still remains (but krandrtray works better). I've tried many different xorg.conf configurations (with and without dualhead) and it always stays the same. I had simmilar problems with radeon driver, described in bug #20558, after upgrade to Fedora 10. But it turned out to be kms drm problem. Kind Regards Piotr Kral -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 21116] New: radeonhd wrong identifies dvi2vga adapter as dvi-digital display
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21116 Summary: radeonhd wrong identifies dvi2vga adapter as dvi-digital display Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: bobahu4(a)gmail.com QAContact: xorg-team(a)lists.x.org There is a bug, so radeonhd driver misidentifies dvi2vga adapter as dvi digital display. Radeon hd 4850, radeonhd 1.2.5, DVI display connected to first dvi port (closest to mainboard), and dvi2vga adapter sits on second dvi port, and no displays connected to it. When I installed radeonhd 1.2.5 (used fglrx previously), booted os and got resolution - 1152x864 (My display native resolution - 1680x1050). those resolutions was available for choose in gnome's resolution change app: 1152x864 1024x768 800x600 640x480 xrandr showed me this ... Screen 0: minimum 320 x 200, current 1152 x 864, maximum 1680 x 1680 DVI-I_1/digital connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1360x768 59.8 1152x864 60.0* 1024x768 60.0 800x600 60.3 640x480 59.9 DVI-I_1/analog disconnected (normal left inverted right x axis y axis) TV_7PIN_DIN disconnected (normal left inverted right x axis y axis) DVI-I_2/digital connected 1152x864+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 59.9 + 1280x1024 75.0 59.9 1280x960 59.9 1152x864 75.0 74.9* 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 60.0 720x400 70.1 ... then I unplugged DVI2VGA, and was able to change resolution to 1680x1050 xrandr output Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1680 DVI-I_1/digital disconnected (normal left inverted right x axis y axis) DVI-I_1/analog disconnected (normal left inverted right x axis y axis) TV_7PIN_DIN disconnected (normal left inverted right x axis y axis) DVI-I_2/digital connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 59.9*+ 1280x1024 75.0 59.9 1280x960 59.9 1152x864 75.0 74.9 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 60.0 720x400 70.1 DVI-I_2/analog disconnected (normal left inverted right x axis y axis) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 21113] New: RadeonHD 4760 doesn't init framebuffer right
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21113 Summary: RadeonHD 4760 doesn't init framebuffer right Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: mcq(a)cacr.caltech.edu QAContact: xorg-team(a)lists.x.org As described earlier on the mailing list, my HIS 4760 card doesn't init right with radeonhd: http://lists.opensuse.org/radeonhd/2009-04/msg00000.html Since that message, I've tried the new xorg 1.6.0 and radeonhd-1.2.5 that just hit Debian sid (2:1.6.0-1 and 1.2.5-1 respectively) with the same symptoms so it's probably not just me driving the git-head compiles wrong. The card is this one: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=… I've attached a video so you can see the failure symptom. In case the attachment doesn't make it, it's available here for a few days: http://rockgeek.org/radeonhd-bug.mp4 The video shows the (subtly matrix-like) screen right after 'xinit'. Happy to provide further info upon request, otherwise I'm just tossing the card in the drawer and forgetting about it. Good luck! -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 27011] New: sudden xserver crash on RV630 card
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=27011 Summary: sudden xserver crash on RV630 card Product: xorg Version: 7.5 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: moormaster(a)gmx.net QAContact: xorg-team(a)lists.x.org My xserver suddenly crashes sometimes... if it crashes it was exactly in those moments where i was just pressing "ENTER" in the gnome-terminal or in pidgin... maybe this is just a random symptom ^^ But the dmesg also shows strange messages when this happens: [drm] Resetting GPU mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [drm] Setting GART location based on new memory map [drm] Loading RV630 CP Microcode platform r600_cp.0: firmware: requesting radeon/RV630_pfp.bin platform r600_cp.0: firmware: requesting radeon/RV630_me.bin [drm] Resetting GPU I attached the log files. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 20590] New: Rendering artifacts in KDE 4.2.1 using radeonhd driver
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=20590 Summary: Rendering artifacts in KDE 4.2.1 using radeonhd driver Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: registration(a)grek.tuffmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=23738) --> (http://bugs.freedesktop.org/attachment.cgi?id=23738) Artifacts (lines) in background of scrollbar of folder view plasmoid Hello, I'd like to report small yet annoying issue that can be observed in KDE 4.2.1 using radeonhd driver (1.2.4_121202_4e89726-2.1). I'm using openSUSE 11.1. I'll attach two screenshots presenting the most common artifacts: 1. lines in background of folder view plasmoid's scrollbar 2. small gaps in tooltips displayed by task bar The reproducibility of those two problems is 100% but sometimes I can see some other problems as well. I've verified the same set up on different computer with NVidia card and there are no rendering problems so it must be driver-specific problem. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 23340] New: HDMI sound is not automatically detected
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23340 Summary: HDMI sound is not automatically detected Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: neil(a)aldur.co.uk QAContact: xorg-team(a)lists.x.org HDMI sound has to be manually configured in xorg.conf and is switched on for outputs that don't support it (such as internal LCD on laptops). HDMI sound should be automatically detected. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 25281] New: radeonhd segfaults on F12, r5xx
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=25281 Summary: radeonhd segfaults on F12, r5xx Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: ahabig(a)umn.edu QAContact: xorg-team(a)lists.x.org CC: ahabig(a)umn.edu Created an attachment (id=31470) --> (http://bugs.freedesktop.org/attachment.cgi?id=31470) logverbose 7 Xorg.0.log Just updated my T60p laptop (M56 chip) to Fedora 12, hoping that the new kernel and drm code would finally get me usable 3D. No such luck. Actually, the kms causes the default install to hang (but that's a bug for the fedora people). Booting with "nomodeset" lets me go, i recompiled radeonhd from git vs. all the new libraries, and I can get X just fine so long as I'm using a simple window manager (Windowmaker). With either gnome or kde, the radeonhd driver segfaults at a very late stage in the X-starting process - the desktop loads, xterm's start to load up, then pow. Will attach logverbose 7 log, but here's the important part: Backtrace: 0: /usr/bin/X (xorg_backtrace+0x3c) [0x80e587c] 1: /usr/bin/X (0x8048000+0x5eb66) [0x80a6b66] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x7c540c] 3: /usr/lib/xorg/modules/drivers/radeonhd_drv.so (0x566000+0x4c94a) [0x5b294a] 4: /usr/lib/xorg/modules/libexa.so (0x5f3000+0xc47c) [0x5ff47c] 5: /usr/lib/xorg/modules/libexa.so (0x5f3000+0xd36c) [0x60036c] 6: /usr/bin/X (0x8048000+0xd3a07) [0x811ba07] 7: /usr/bin/X (CompositePicture+0x290) [0x810eef0] 8: /usr/bin/X (0x8048000+0xcd125) [0x8115125] 9: /usr/bin/X (0x8048000+0xc9cb4) [0x8111cb4] 10: /usr/bin/X (0x8048000+0x261f7) [0x806e1f7] 11: /usr/bin/X (0x8048000+0x1a8c5) [0x80628c5] 12: /lib/libc.so.6 (__libc_start_main+0xe6) [0x969bb6] 13: /usr/bin/X (0x8048000+0x1a4b1) [0x80624b1] Segmentation fault at address 0x10 -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 20512] New: Does not detect the Mobility FireGL V5200 card.
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=20512 Summary: Does not detect the Mobility FireGL V5200 card. Product: xorg Version: 7.4 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: minor Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: tim.kornhammar(a)gmail.com QAContact: xorg-team(a)lists.x.org # Distribution: Ubuntu Jaunty (9.04) (alpha updated 2009-03-06) # Driver: RadeonHD 1.2.4+git20090302.9c8ab2df-0ubuntu0tormod # Setup: Lenovo Thinkpad Z61p (Mobility FireGL V5200) It's a minor problem but it does not detect my card correctly. -------------------------------------------------------------- [ 0.537264] (II) RADEONHD(0): Unknown card detected: 0x71C4:0x17AA:0x202B. If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x71C4:0x17AA:0x202B: <name of board> and *please* describe the problems you are seeing in your message. [ 0.537290] (--) RADEONHD(0): Detected an M56 on an unidentified card [ 0.537358] (II) RADEONHD(0): Mapped IO @ 0xee000000 to 0x7fb83a3a7000 (size 0x00010000) [ 0.537470] (II) RADEONHD(0): PCIE Card Detected [ 0.537506] (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location [ 0.537782] (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x71c4 IOBaseAddress: 0x2000 Filename: BR22908.BIN BIOS Bootup Message: Lenovo M56-CSP256GL ATOM BIOS 400e/330m LCD/CRT/DFP/TV -------------------------------------------------------------- -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 8

[Bug 21075] New: [M54] very bad display corruption
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21075 Summary: [M54] very bad display corruption Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: udo.rader(a)bestsolution.at QAContact: xorg-team(a)lists.x.org When using the radeonhd driver configured for two monitors but only one present (or in other words a laptop without its external monitor connected), switching throught virtual desktops makes application windows more and more corrupted the longer the box runs, see the attached screenshot for a mild example. This happens both for already open and newly opened windows. Switching to the console and back to X does not help. The relevant parts of my xorg.conf look like this: ------CUT------ Section "Monitor" Identifier "LCD" Option "DPMS" EndSection Section "Monitor" Identifier "ExtDVI" VendorName "Hanns.G" ModelName "Hanns.G HG221D" Option "LeftOf" "LCD" Option "DPMS" EndSection Section "Device" Identifier "device0" VendorName "ATI" Driver "radeonhd" Option "DPMS" Option "AccelMethod" "EXA" Option "monitor-PANEL" "LCD" Option "RROutputOrder" "LVDS" Option "DRI" "true" Option "monitor-DVI-D_1" "ExtDVI" EndSection Section "Screen" Identifier "screen0" Device "device0" Monitor "LCD" DefaultColorDepth 24 Subsection "Display" Depth 24 EndSubsection EndSection Section "Screen" Identifier "screen1" Device "device0" Monitor "ExtDVI" DefaultDepth 24 Subsection "Display" Depth 24 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" InputDevice "SynapticsMouse1" "SendCoreEvents" Screen 0 "screen1" Screen 1 "screen0" RightOf "screen1" EndSection ------CUT------ My Xorg.0.log will follow immediately. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 7

[Bug 22278] New: The driver doesn't work with XEn (Yet)
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22278 Summary: The driver doesn't work with XEn (Yet) Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: joop_boonen(a)web.de QAContact: xorg-team(a)lists.x.org I wonder if and when radeonhd will work together with Xen? -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 25568] New: RADEONHD(0): Unusupported PowerPlayInfo Revision
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=25568 Summary: RADEONHD(0): Unusupported PowerPlayInfo Revision Product: xorg Version: 7.4 Platform: x86 (IA32) OS/Version: FreeBSD Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: lesko.peter(a)intrak.sk QAContact: xorg-team(a)lists.x.org Created an attachment (id=31947) --> (http://bugs.freedesktop.org/attachment.cgi?id=31947) Xorg.0.log driver: xf86-video-radeonhd-1.3.0 pciconf -lv: vgapci0@pci0:2:0:0: class=0x030000 card=0x01621043 chip=0x71421002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'Radeon X1300 Pro or X1550 (rv515)' class = display subclass = VGA cat /var/log/Xorg.0.log | grep EE: (EE) RADEONHD(0): Unusupported PowerPlayInfo Revision (EE) RADEONHD(0): Power Management: Cannot get known good chip configurations (EE) RADEONHD(0): RHDCSStop: Command Submission backend is not active! xrandr -q; xrandr -q --verbose: Screen 0: minimum 640 x 400, current 1280 x 1024, maximum 1280 x 1024 default connected 1280x1024+0+0 (0x104) normal (normal) 0mm x 0mm Identifier: 0x103 Timestamp: 2324252 Subpixel: no subpixels Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1280x1024 (0x104) 0.0MHz *current h: width 1280 start 0 end 0 total 1280 skew 0 clock 0.0KHz v: height 1024 start 0 end 0 total 1024 clock 0.0Hz 1024x768 (0x105) 0.0MHz h: width 1024 start 0 end 0 total 1024 skew 0 clock 0.0KHz v: height 768 start 0 end 0 total 768 clock 0.0Hz 800x600 (0x106) 0.0MHz h: width 800 start 0 end 0 total 800 skew 0 clock 0.0KHz v: height 600 start 0 end 0 total 600 clock 0.0Hz 640x480 (0x107) 0.0MHz h: width 640 start 0 end 0 total 640 skew 0 clock 0.0KHz v: height 480 start 0 end 0 total 480 clock 0.0Hz 720x400 (0x108) 0.0MHz h: width 720 start 0 end 0 total 720 skew 0 clock 0.0KHz v: height 400 start 0 end 0 total 400 clock 0.0Hz using default xorg.conf from X -configure -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 22300] New: Blank screen on hd4670 - "MC not idle!"
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22300 Summary: Blank screen on hd4670 - "MC not idle!" Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: mft(a)headingley.fsworld.co.uk QAContact: xorg-team(a)lists.x.org Created an attachment (id=26817) --> (http://bugs.freedesktop.org/attachment.cgi?id=26817) Xorg.log I built xorg & radeonhd from git on mandriva 2009.1 (2.6.29 kernel). If I startx with these I get a memory controller error in the log. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 2

[Bug 22259] New: Xorg freezes with Radeon X1200
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22259 Summary: Xorg freezes with Radeon X1200 Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: sasha.sirotkin(a)gmail.com QAContact: xorg-team(a)lists.x.org OS - out of the box and up to date FC10. HW - Asus M2A-VM motherboard with integrated Radeon X1200 Xorg freezes from time to time for no apparent reason. When it happens the mouse moves a bit, the keyboard does not respond and the image on the screen is frozen. However, the box is accessible via network. In the past it used to happen with "radeon" driver only, when I switch to radeonhd the problem disappeared. However, after some upgrade it reappeared and now happens with both radeon and radeonhd. fglrx driver were never installed on this box. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 28

[Bug 22314] New: compiz start crashes X, backtrace from drm
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22314 Summary: compiz start crashes X, backtrace from drm Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: ahabig(a)umn.edu QAContact: xorg-team(a)lists.x.org Playing with radeonhd under F11, which includes updated kernel/drm and X/xrandr. With latest git radeonhd (see logfile for commit string), X and KDE start up, but crash with a backtrace when compiz tries to start. FireGL v5200 on a Thinkpad T60p, so a supposedly supported r5xx chipset (although compositing and GL always have crashed things badly when used together, see for example Bug #18097). Using the radeon instead of radeonhd driver does not crash, so while the crash seems to be coming from DRM, it's certainly being instigated by something we're doing differently than radeon. Attachments: crash.log is stderr/stdout of the startx chain, contains the backtrace. Other spew in that file looks similar if compiz is not started, so scroll down to the trace. Xorg.0.log is with logverbose 7 -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 8

[Bug 22324] New: Black rectangles on Radeon HD 3200
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22324 Summary: Black rectangles on Radeon HD 3200 Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: arseny.klimovsky(a)gmail.com QAContact: xorg-team(a)lists.x.org Sometimes (in practically every application) black rectangles appear on different places. When push PrintScr button, they disappear. So I can only show a foto of the screen. http://launchpadlibrarian.net/26498708/IMG_9276.JPG Previously I used Ubuntu 8.04 and packages from https://launchpad.net/~tormodvolden/+archive/ppa and everything worked correctly. ProblemType: Bug Architecture: amd64 DistroRelease: Ubuntu 9.04 LsHal: Package: xserver-xorg-video-radeonhd 1.2.5+git20090506.4be5f715-0ubuntu0tormod ProcEnviron: LANGUAGE= LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcVersion: Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 SourcePackage: xserver-xorg-video-radeonhd Uname: Linux 2.6.28-11-generic x86_64 [lspci] 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon HD 3200 Graphics [1002:9610] Subsystem: Giga-byte Technology Device [1458:d000] Other detail you can see on launchpad https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-radeonhd/+bug/… -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 8

[Bug 21423] New: Problem mit radeonhd und SuSE-11.1
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21423 Summary: Problem mit radeonhd und SuSE-11.1 Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: peter-guenther(a)gmx.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=25156) --> (http://bugs.freedesktop.org/attachment.cgi?id=25156) Alle m.E. relevanten Log-Files Obwohl ich (seit SuSE-4.1) immer wieder Probleme mit ATI Karten hatte, lerne ich scheinbar nicht hinzu und bin wieder Besitzer einer HD4670. Ablauf des Problems: - Installation OpenSuse-11.1 - alles ok. - upgrade auf current versions: - alles ok. - Upgrade von KDE 4.13 nach 4.22 - noch alles ok - Beim nachsten Start: startx endet mit weißem Schirm, und cursor-x in der Mitte. Nach Neuinstallation : Exakt der selbe Ablauf. Folgendes habe ich versucht: - Installation von fglrx-Drivern: Totaches Chaos, Hang. - Installation der folgenden Driver (nacheinander) xorg-x11-videoradeonhd-1,2,5-5.1.x86_64.rpm, 1.2.5-7.1, und ...debuginfo-1.2.5-7.1, alle enden mit dem weißen Schirm und dem cursor-Kreux in der Mitte. Im Anhang, radeonlogs.zip, sollten Zip-Files aller relevanten Logs zu finden sein, falls Infos fehlen, bitte Nachricht, und ich eiche sie nach. Danke für Hilfen. ich weiß nicht mehr weiter. Peter Günther -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team

1 18

[Bug 22080] New: Mouse cursor sometimes shows wrong pictogram
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22080 Summary: Mouse cursor sometimes shows wrong pictogram Product: xorg Version: 7.4 Platform: x86 (IA32) OS/Version: FreeBSD Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: vova(a)fbsd.ru QAContact: xorg-team(a)lists.x.org See attached shot, usually it looks like image just put into buffer with wrong offset. Sometimes image repeated down several times (out of usual cursor boundaries) Often after some time of work with such cursor system crashes. xf86-video-radeonhd-1.2.5_2 $ egrep -i curs\|mouse /var/log/Xorg.0.log (**) |-->Input Device "Mouse0" (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000) (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000) (==) RADEONHD(0): Silken mouse enabled (**) Mouse0: Device: "/dev/sysmouse" (**) Mouse0: Protocol: "auto" (**) Mouse0: always reports core events (**) Option "Device" "/dev/sysmouse" (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7 (==) Mouse0: YAxisMapping: buttons 4 and 5 (**) Mouse0: EmulateWheel, EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (**) Mouse0: Buttons: 11 (**) Mouse0: Sensitivity: 1 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Mouse0: (accel) keeping acceleration scheme 1 (**) Mouse0: (accel) filter chain progression: 2.00 (**) Mouse0: (accel) filter stage 0: 20.00 ms (**) Mouse0: (accel) set acceleration profile 0 (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 (II) Mouse0: SetupAuto: protocol is SysMouse (II) config/hal: Adding input device PS/2 Mouse -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 11

[Bug 21396] New: dual screen; one card; second screen black
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21396 Summary: dual screen; one card; second screen black Product: xorg Version: 7.4 Platform: x86-64 (AMD64) OS/Version: other Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: lord-weber-andrwe(a)renona-studios.org QAContact: xorg-team(a)lists.x.org Created an attachment (id=25125) --> (http://bugs.freedesktop.org/attachment.cgi?id=25125) Xorg.0.log starting X verbosity 7 system: OS: Gentoo-sources-2.6.29-r1 Xorg: Xorg-server-1.5.3-r5 driver: radeonhd-1.2.5 (local-overlay); xrandr-1.2.3 DE: XFCE4-4.6.1 graphic card: Radeon HD 4670 (MSI R4670) Hi, I can't get my second port of the graphic card working. I'm using 2 monitors the one plugged into the first port of my card always show X fine but the second one does only show a black screen or grey small vertical stripes on black background. If I set something like a resolution using xrandr the second monitor reacts for a short time and shows a gray big grey horizontal stripe. I tested the card against failures using Windows Vista and the vesa driver. Both display the desktop on both monitors which means the card isn't broken and both monitors are working. One monitor is connected using DVI and the other using VGA with DVI-VGA converter. I tried forcing a resolution for both screens and setting up dual screen in Xorg.conf. Andrwe -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 8

[Bug 29511] New: Xserver crashes
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

https://bugs.freedesktop.org/show_bug.cgi?id=29511 Summary: Xserver crashes Product: xorg Version: 7.5 Platform: Other OS/Version: FreeBSD Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: elmar_fd(a)leo.de QAContact: xorg-team(a)lists.x.org Created an attachment (id=37792) --> (https://bugs.freedesktop.org/attachment.cgi?id=37792) shar-file with Xorg.0.log, xorg.conf.new, radeonhd-session The RadeonHD driver crashes in LVDSEnable when trying to call Private->SetBacklight. This element is zero, despite Private->BlLevel is 192. Xorg was started in gdb with r -logverbose 7 -config /home/elmar/xorg.conf.new -retro The file xorg.conf.new was generated by Xorg -configure The driver radeonhd was compiled with -O0 -g Version of the driver 1.3.0 Platform is FreeBSDD 8.1, copiled in /usr/ports/x11-drivers/xf86-video-radeonhd-1.3.0 Only change was in Makefile CFLAGS=-O0 -g Maschine was a HP/Compaq nw8440 The attached file contains the X config file, the Xorg log file and a gdb session with a backtrace. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 2

[Bug 21432] New: 0x95C0:0x1028:0x3243: ATI Mobility Radeon HD 3470
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21432 Summary: 0x95C0:0x1028:0x3243: ATI Mobility Radeon HD 3470 Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: nicolas(a)deffayet.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=25187) --> (http://bugs.freedesktop.org/attachment.cgi?id=25187) xorg.conf, Xorg.0.log, vga.rom Hello, 0x95C0:0x1028:0x3243 card is provided with Dell Optiplex 960. lscpi show: 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3470 This card work with fglrx driver (except big desktop) but don't work with radeonhd driver. This card have two DisplayPort and two LDC monitor connected through DVI-D <-> DisplayPort adapter. X don't start: (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000) (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000) (EE) RADEONHD(0): Card information has invalid connector information (II) RADEONHD(0): I2C bus "RHD I2C line 0" removed. (II) RADEONHD(0): I2C bus "RHD I2C line 1" removed. (II) RADEONHD(0): I2C bus "RHD I2C line 2" removed. (II) RADEONHD(0): I2C bus "RHD I2C line 3" removed. (II) UnloadModule: "radeonhd" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found I have tried with HPD option set to Off, Swap, Normal without any success. Please find in attachment the xorg.conf, normal Xorg.0.log and Xorg.0.log verbose 7 and the rom file. I have tried to fix the problem myself without any success i have very limited C/C++ clue. I don't understand why RHDConnectorsInit don't work and return "Card information has invalid connector information". Thank you very much Best Regards, Nicolas DEFFAYET -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 2

[Bug 21342] New: urxvt goes corrupt with radeonhd&dri(xv)&EXA
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21342 Summary: urxvt goes corrupt with radeonhd&dri(xv)&EXA Product: xorg Version: 7.2 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: damex(a)hu2.ru QAContact: xorg-team(a)lists.x.org using last gentoo-stable with git radeonhd driver&git vanilla kernel sources. urxvt goes corrupt after moving its window/working inside. changes anything urxvt configs, trying to enable/disable xcompmgr/compiz gives nothing with EXA acceleration. urxvt works fine with XAA acceleration. thats with enabled dri(xv). if disabling dri(xv) from xorg config urxvt works fine. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 15

[Bug 22158] New: Fallback for RGB24+Transformation+RepeatNone on r6xx/r7xx
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22158 Summary: Fallback for RGB24+Transformation+RepeatNone on r6xx/r7xx Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: linuxhippy(a)gmail.com QAContact: xorg-team(a)lists.x.org - Source picture without alpha channel (RGB24) - RepeatNone - Transformation cause a software fallback in EXA on my HD3850. There has been some discussion about that on the radeonhd mailing list, with the title "Transformation + "fast" filter + RepeatNone = Fallback?". -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 2

[Bug 21388] New: Dual monitor setup results in blank screen on CRTC1
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21388 Summary: Dual monitor setup results in blank screen on CRTC1 Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: pht(a)spatium.org QAContact: xorg-team(a)lists.x.org Created an attachment (id=25111) --> (http://bugs.freedesktop.org/attachment.cgi?id=25111) xorg config I have a dual monitor setup (see attached files); the problem is that the secondary monitor (connected to dvi2) stays black. Note that these are CRT monitors. It switches to correct mode, thus is not out of range, I can verify that via the OSD menu. I can even switch it to different modes using xrandr, but it stays black. It is not a hardware issue, dual monitors work okay in the other operating system. The theory is that CRTC1 is not properly initialized or operated. This is backed up by the fact that when the first (ie. working) monitor is plugged out before starting X, the other monitor (ie. blank) is working, and when the former first monitor is plugged back and activated via xrandr, it stays black. I experienced a brief moment a working setup, which went as follows: the X server was first configured to run with the radeon driver, then it was shut down, then the radeonhd driver was configured. This setup resulted in both monitors working. After shutting down X again, all was back to previous state, as described above. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 7

[Bug 21383] New: X1200 screen flicker problem
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21383 Summary: X1200 screen flicker problem Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: critical Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: priikone(a)silcnet.org QAContact: xorg-team(a)lists.x.org Since fglrx that supports ubuntu 9.04 doesn't anymore support X1200 I had to start using radeonhd but it has some serious flickering problems. Whenever there is enough movement in the screen the screen flickers, white lines, random garbage, and various displacements going on quite often. Best example is a website which triggers the most sever problems with flash animations: http://www.foreca.fi/Suomi/tasmasaa/Helsinki Depending on what flash animations is running there the screen is either flickering a little bit a quite a lot. This site reproduces the problem every time. (The site shows local weather in Helsinki area) It can also be reproduced by for example giving dmesg;dmesg in gnome-terminal and then constantly doing Page Up and Page Down (with xset r rate 200 to get away the keyboard delay) and the screen will flicker. With this I can also reproduce the problem every time. Attached xorg.conf and X logs. Whatever else data you need to get let me know. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 12

[Bug 21698] New: DRM does not recognize Radeon HD 4890, /dev/dri/ empty
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21698 Summary: DRM does not recognize Radeon HD 4890, /dev/dri/ empty Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: low Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: xamaniqinqu(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=25790) --> (http://bugs.freedesktop.org/attachment.cgi?id=25790) X server error log DESCRIPTION: The Direct Rendering Manager does not recognize the Radeon HD 4890 video card. There are no device nodes in /dev/dri/. Operating system: Gentoo Linux/amd64, ~amd64 branch X server version: 1.5.3.6 Mesa version: git DRM version: git Radeonhd version: git REPRODUCTION: (1) install the ATI Radeon HD 4890 video card. (2) install Mesa, DRM and radeonhd from git. (3) start the X server. (!) A peculiarity: glxinfo does report "Direct Rendering: Yes". Glxgears also uses direct rendering (~400 FPS). No other program is able to use DRI. I added "Group 0666" to my DRI section in xorg.conf. ERROR LOG: Attached. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 11

[Bug 24529] New: Drawing errors with radeon or radeonhd drivers with EXA or XAA
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=24529 Summary: Drawing errors with radeon or radeonhd drivers with EXA or XAA Product: xorg Version: 7.4 Platform: x86-64 (AMD64) URL: http://forums.gentoo.org/viewtopic-t-796671.html OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: guido-xorgbugs(a)unknownsite.de QAContact: xorg-team(a)lists.x.org On my Ati Radeon X1800, when using the radeonhd driver with AccelMethod XAA or EXA and/or with the kernel drm module loaded, the screen shows drawing errors that make the X session partially and in some cases completely unusable. When using XAA and the kernel DRM module is not loaded, most non-Qt4 apps show drawing errors that make them unusable. Examples: xterm and Firefox cannot scroll properly, OpenOffice.org and many Qt3 apps don't draw most of their controls, only the text labels and graphic icons on them, while the background stays what happened to be in that part of the screen before that window appeared. Most Qt 4 apps display fine, with only minor problems. When using EXA and the kernel DRM module is not loaded, all windows stay solid black. When the kernel DRM module is loaded, the entire screen will become unusable, either solid black or sometimes solid white, either directly after starting the X server or after starting some program that actually uses OpenGL (I used glxgears). With AccelMethod set to ShadowFB, no drawing errors are visible, but the desktop is rather slow, and both XV and hardware accelerated 3D rendering don't work. I have already described the problem a bit more in depth, including configuration files and server logs, over at the Gentoo forums here: http://forums.gentoo.org/viewtopic-t-796671.html In the above thread, it says I am using driver version 2.5.0, but I have since then upgraded to the newest git version (following the advice on http://wiki.x.org/wiki/radeonhd#head-f79351b4e2b19fad40529ce297ac2d2a1e9035…), and the problem is still there. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 22656] New: Monitor off after suspend to ram
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22656 Summary: Monitor off after suspend to ram Product: xorg Version: 7.4 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: kamil.stachowski(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=27451) --> (http://bugs.freedesktop.org/attachment.cgi?id=27451) Xorg log ## Happens on: Dell Studio 1737, Radeon HD 3650 Arch Linux, kernel 2.6.30-5, xorg-server 1.6.1.901-3, xf86-video-radeonhd 1.2.5-1, pm-utils 1.2.5.1 Also tried–though much less extensively–on Debian Sid, with the same results. ## Problem: Monitor is off after suspend to ram. The computer wakes up ok but the monitor remains off. Issuing "vbetool dpms on" and "vbetool post" doesn't seem to change anything. ## I have tried: – pm-utils with all options and various (though not all possible) combinations; – s2ram with all suggested options; – hibernate-script with both pm-utils and uswsusp; – machdep.acpi_vbios_reset=0, acpi.vbios_reset=0 combined with vbepost, hpet=disable. Results vary from complete freeze to everything's-fine-except-for-the-screen-is-black. This is reflected in the pm-suspend log, varying from empty through almost-great-but-the-resume-part-is-missing, through crash-on-resuming-99video to absolutely perfect. I've also tried the radeon driver (6.12.2-2; doesn't really work too well with my card), I got it to successfully resume, except for that it froze when I tried to shut it down later on; -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team N��r��y隊Z�u�'�߮�˛��m�)z{.��+�Z+i�b�*'jW(�f�vǦj)kiר�~��i��

1 5

[Bug 23912] New: No HDMI audio with RV730 GPU on radeonhd
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23912 Summary: No HDMI audio with RV730 GPU on radeonhd Product: xorg Version: unspecified Platform: x86-64 (AMD64) URL: http://phoronix.com/forums/showthread.php?p=91863#post91 863 OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: andrew(a)wasielewski.co.uk QAContact: xorg-team(a)lists.x.org Created an attachment (id=29492) --> (http://bugs.freedesktop.org/attachment.cgi?id=29492) Latest Xorg.0.log file I can't get HDMI audio from RV730 GPU (Asus Radeon HD 4670 PCI-e card) on radeonhd. O/S: Fedora 11 (2.6.30.5-43.fc11.x86_64) radeonhd package: 1.2.5 (xorg-x11-drv-radeonhd.x86_64 1.2.5-2.10.20090714git.fc11) Desktop: KDE 4.3 Motherboard: Gigabyte GA-MA78G-DS3H HDMI audio works on same hardware config in MS Windows and with ATI fglrx driver. Also Gigabyte GA-MA78G-DS3H motherboard has HD 3200 GPU integrated with the 780G chipset, though this is normally disabled in BIOS in favour of the HD 4670 PCI-e card. If I re-enable integrated graphics and connect to this HDMI port, I get sound when I play "Test" in the Multimedia - System Settings screen. I know radeonhd supports RV730 but can't find any definitive statement one way or other re: HDMI audio. Can only attach one file so have attached Xorg.0.log. xorg.conf is in Phoronix forum post in URI above. Regards, Andrew Wasielewski -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 21637] New: Fall back to shadowfb for second X session
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=21637 Summary: Fall back to shadowfb for second X session Product: xorg Version: unspecified Platform: All OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: federicotg(a)gmail.com QAContact: xorg-team(a)lists.x.org Currently DRM only works for the first X session. When the user switches to another session by fast user switching or any other means, DRM and EXA are not available so rendering is unnacelerated and very slow. Using shadowfb as a fallback in that case would provide much better performance. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 24466] New: rhd_dump doesn't work with RV730
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=24466 Summary: rhd_dump doesn't work with RV730 Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: andrew(a)wasielewski.co.uk QAContact: xorg-team(a)lists.x.org When I try to run rhd_dump with my RV730 GPU I get the following error: [root@localhost conntest]# ./rhd_dump 01:00.0 rhd_dump: v1.3.0, git branch master, commit 42a81085 Unknown device: 0x1002:0x9490 (01:00.00). The same thing happens with locally-compiled radeonhd 1.3.0. and with latest radeonhd 1.2.5 Fedora package. With the on-board HD 3200 active instead I get normal output (on radeonhd 1.3.0). I get an entry in Xorg.0.log about "unidentified card" but I get the same about RS780 with the HD 3200 active. (II) RADEONHD(0): Card not in database: 0x9490:0x1043:0x0268; using generic modesetting. If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x9490:0x1043:0x0268: <name of board> and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an RV730 on an unidentified card I have seen some postings about this error before, but no indication how to fix it e.g. http://lists.opensuse.org/radeonhd/2008-08/msg00287.html. O/S: Fedora 11 (kernel 2.6.30.8) M/B: Gigabyte GA-MA78G-DS3H The aim is to compare register values under radeonhd and fglrx to try and find out why HDMI audio doesn't work. Thanks, Andrew -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 23759] New: can't switch to VT
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23759 Summary: can't switch to VT Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: minor Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: hdh(a)lazny.tang.la QAContact: xorg-team(a)lists.x.org On an HP dv6-1280us laptop with Radeon HD 4650, radeonhd git from 20090905 When switching to VT: * With radeon driver, the screen turn off then on as VT * With radeonhd driver, the screen doesn't turn off, it stay lit but black Pressing Alt-F7 brings X back to the front I will attach Xorg.0.log with logverbose 7 later. Here is my xorg.conf Section "Device" Identifier "M96" Driver "radeonhd" Option "AccelMethod" "exa" Option "DRI" "on" EndSection I have tried removing Option "AccelMethod" "exa" but the issue persist. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 25822] New: RV730==M96: No modes for DVI-D_1 (HDMI)
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=25822 Summary: RV730==M96: No modes for DVI-D_1 (HDMI) Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: zajec5(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=32357) --> (http://bugs.freedesktop.org/attachment.cgi?id=32357) Xorg.0.log Enabling any mode on my DVI-D_1 makes TV displaying "Mode not supported". Same TV is driven fine with KMS. I can also use it fine with KMS and radeonhd on RV620. Tried also radeonhd on RV635 (same TV) - also works fine. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 24472] New: wait for external screen
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=24472 Summary: wait for external screen Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: estellnb(a)gmail.com QAContact: xorg-team(a)lists.x.org On resume from s2ram my external screen is often disabled because it needs some time to awake from standby which does not seem to be taken into account by radeonhd. Please have a look at this; f.i. do not disable the external screen as long as it does not respond for more than a second or so. - thx. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 23810] New: xrandr: configuring crtc0 failed
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23810 Summary: xrandr: configuring crtc0 failed Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: critical Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: estellnb(a)gmail.com QAContact: xorg-team(a)lists.x.org If I change some settings regarding the screen and resolution I always run into the same problem: xrandr refuses to continue its work saying 'configuring crtc0 failed';- that with many different xorg.confs and many different ways of using xrandr before it starts to fail. Lately both screens turned black after accidentially disabling PANEL and DVI and then could not be restored because of xrandr saying 'configuring crtc0 failed'.- and my total KDE session was lost. Bug 20888, Bug 20628, Bug 18592 and Bug 22452, Comment #8 are related to this issue; all of them video mode configuration errors as initiated by xrandr. note: this is very important to xinerama users and game playing (Most games require a change in resolution and a switch to clone mode.). -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 23765] New: radeonhd lockup with a Radeon HD 2600XT
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23765 Summary: radeonhd lockup with a Radeon HD 2600XT Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: Bobboau(a)hotmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=29290) --> (http://bugs.freedesktop.org/attachment.cgi?id=29290) dmesg after the lockup I have this card ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814129090 ) installed on an Asus a7n8x deluxe mobo, with a kubuntu 9.04 install, I have the 2.6.30 kernel and I installed the radeonhd driver by following the procedure outlined here ( https://help.ubuntu.com/community/RadeonHD ). using the GUI causes the computer to lockup. I can leave it running for hours and it will be fine, but as soon as I start opening/closing/moving windows about, the interface will lockup. I will not be able to interact with anything and I will not be able to switch to console via ctrl-alt-Fn. I CAN move the mouse, but the cursor moves at about 1-3 FPS and it is stuck in whatever mode it was in when the system locked (i.e. if I was moving a window it will keep the 'move' cursor), and I CAN connect via SSH, though the terminal is sluggish. the only way to put my computer back into an operational state is to reboot from ssh. (killing X via ssh does seem to succeed but the it never has any visible effect) using the ati driver does not seem to have these issues. also if I boot up with the ati driver and switch (by changing xorg.conf and pkill "X") to the radeonhd, this problem does not seem to be present, though I might have just been getting lucky here. the lockup can also be very inconsistent, sometimes taking up to 15 minutes to manifest if at all but usually it happens within the first 10 seconds after the reboot sequence finishes and I start using the GUI. my current xorg.conf, and Xorg.0.log are here ( http://pastebin.com/f356737a6 ) I have attached the dmesg text I got via ssh after a lockup. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 2

[Bug 22452] New: Xorg fails to keep xinerama setup
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22452 Summary: Xorg fails to keep xinerama setup Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: estellnb(a)gmail.com QAContact: xorg-team(a)lists.x.org When booting into runlevel 5 Xinerama setup is at first applied correctly but then lost (switch to clone mode). Trying to reactivate it via xrandr fails. Has occurred with update to newest Xorg & radeonhd: xorg-x11-7.4-33.1, xorg-x11-driver-video-radeonhd-1.2.5_20090506_4be5f71-7.21 -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 23

[Bug 23929] New: no monitor signal after starting full screen 2d game (wine starcraft, raptor)
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23929 Summary: no monitor signal after starting full screen 2d game (wine starcraft, raptor) Product: xorg Version: 7.4 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: sec(a)dschroeder.info QAContact: xorg-team(a)lists.x.org if i start a 2d game like raptor (sdl), monitor signal dies...this works with xf86-video-ati... -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 23927] New: unconfigurable Xorg
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23927 Summary: unconfigurable Xorg Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: blocker Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: estellnb(a)gmail.com QAContact: xorg-team(a)lists.x.org Even old and well-woking xorg.confs do not work any more. My external monitor is completely out of sync, my internal monitor does not display anything. It is the same for newly SaX-configured xorg.confs. xorg-x11-driver-video-radeonhd-1.2.5_20090901_f7ad938-1.1.x86_64 xorg-x11-server-7.4-51.4.x86_64 -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 45

[Bug 27523] New: Artifacts (black lines and blobs) on EeeBox B206
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

https://bugs.freedesktop.org/show_bug.cgi?id=27523 Summary: Artifacts (black lines and blobs) on EeeBox B206 Product: xorg Version: 7.5 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: johannes.kingma(a)gmail.com QAContact: xorg-team(a)lists.x.org The EeeBox B206 has a Radeon HD 3400 graphic adapter. Using xf86-video-radeonhd works but for black spots and lines most notabily on a rdesktop session. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5

[Bug 26137] New: Radeon X1200 - blank screen.
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=26137 Summary: Radeon X1200 - blank screen. Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: guy.roussin(a)teledetection.fr QAContact: xorg-team(a)lists.x.org Created an attachment (id=32743) --> (http://bugs.freedesktop.org/attachment.cgi?id=32743) /var/log/Xorg.0.log and /etc/X11/xorg.conf Hi, I use a miniPC integrated in a big TV (Samsung 460DXN) it includes a X1200 I get a black screen on debian squeeze when i want to use the native resolution (1366x768) I get the modeline from windows with powerstrip (before erasing windows). http://www.samsung.com/ch-fr/products/monitors/networkingmonitors/ls46bptns… in french http://www.samsung.com/us/function/search/espsearchResult.do?keywords=SyncM… radeonhd : 1.2.5 from debian squeeze. xorg : 7.4 I try a lots of parameters in xorg.conf without success. lspci -v : 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc RS690M [Radeon X1200 Series] Flags: bus master, fast devsel, latency 64, IRQ 18 Memory at d8000000 (64-bit, prefetchable) [size=128M] Memory at fdef0000 (64-bit, non-prefetchable) [size=64K] I/O ports at de00 [size=256] Memory at fdd00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: [50] Power Management version 2 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ I can other make test if needed ... Thank you very much Guy -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 2

[Bug 26552] New: xorg uses up one cpu and hangs during video playback
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=26552 Summary: xorg uses up one cpu and hangs during video playback Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: dothebart(a)citadel.org QAContact: xorg-team(a)lists.x.org I can't get any usefull backtrace of it? (gdb) where #0 0x00007ffa77eeb4e7 in ?? () #1 0x00007ffa764b9833 in ?? () #2 0x0000000000010000 in ?? () #3 0x0000000000836aa0 in ?? () #4 0x0000000000000637 in ?? () #5 0x0000000000836b80 in ?? () #6 0x0000000000000000 in ?? () this is an AMD64 box, debian SID, 01:00.0 VGA compatible controller: ATI Technologies Inc RV630 [Radeon HD 2600XT] (rev ff) 01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series] (rev ff) radeonhd pulled from GIT. please let me know how I can provide you with more information. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 24771] New: Scrolling causes screen corruption
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=24771 Summary: Scrolling causes screen corruption Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: oliverhoffmann32(a)googlemail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=30767) --> (http://bugs.freedesktop.org/attachment.cgi?id=30767) Image taken from firefox after scolling up and down a few times Scrolling up or down inside a table/list of a window (Firefox or Konsole, for example) sometimes causes screen corruption in the redrawn area of the window. This happens with radeonhd driver on an HD4850 but not with the nvidia driver on another system with exactly the same distribution / software configuration. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 43

[Bug 23395] New: Using Option "HPD" "off" switched off HDMI TV
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23395 Summary: Using Option "HPD" "off" switched off HDMI TV Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: low Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: karsten(a)hayn.info QAContact: xorg-team(a)lists.x.org On http://www.x.org/wiki/radeonhd#head-d2ffccb02dd625f846dd8197bad71ee38109b87… it is stated to always report when HPD is needed to use a monitor. My Monitor (Samsung LE26B350 26 inch TV with HDMI) does work well, when switched before the start of X11. If it is switched on later I need to restart gdm and kill some failsafe X11 processes. By using HPD off it does work. I have Ubuntu 8.10 running on a system using amd g780 as chipset with the monitor attached to the onboard hdmi. I can send more logs if needed. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 20310] New: radeonhd running 1280x1024 LCD at 1400x1050
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=20310 Summary: radeonhd running 1280x1024 LCD at 1400x1050 Product: xorg Version: 7.4 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: arequipeno(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=23287) --> (http://bugs.freedesktop.org/attachment.cgi?id=23287) xorg.conf (works fine on Fedora 8) I have two DVI-I-connected LCDs; one is 1680x1050 and the other is 1280x1024. As you can see from the xrandr output below, something is adding a 1400x1050 mode to the 1280x1024 LCD. I am able to use xrandr to change the resolution to 1280x1024. This is a fully updated (as of 24-Feb-2009) Fedora 10 system: xorg-x11-drv-radeonhd-1.2.4-1.1.20081212git.fc10.x86_64 xorg-x11-server-Xorg-1.5.3-13.fc10.x86_64 I have been using the radeonhd driver on Fedora 8 without seeing this problem: xorg-x11-drv-radeonhd-1.2.3-1.2.20081031git.fc8 xorg-x11-server-Xorg-1.3.0.0-47.fc8 Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 2960 x 1050 DVI-I_1/analog disconnected (normal left inverted right x axis y axis) DVI-I_1/digital connected 1680x1050+1280+0 (normal left inverted right x axis y axis) 473mm x 296mm 1680x1050 59.9*+ 59.9 1400x1050 74.9 74.8 60.0 1280x1024 75.0 60.0 1440x900 74.9 60.0 1280x960 60.0 1152x864 75.0 74.9 1024x768 75.1 75.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 72.8 75.0 66.7 60.0 59.9 720x400 70.1 TV_SVIDEO disconnected (normal left inverted right x axis y axis) DVI-I_2/analog disconnected (normal left inverted right x axis y axis) DVI-I_2/digital connected 1400x1050+0+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0 + 75.0 60.0 1400x1050 60.0* 1280x960 60.0 1152x864 75.0 1024x768 75.1 75.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 72.8 75.0 60.0 59.9 720x400 70.1 -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 5