February 2010 - Radeon HD - openSUSE Mailing Lists

[Bug 25890] New: RadeonHD driver hangs the computer, showing only the bios screen all messed up
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=25890 Summary: RadeonHD driver hangs the computer, showing only the bios screen all messed up Product: xorg Version: 7.5 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: blocker Priority: highest Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: mr.hugo.gomes(a)gmail.com QAContact: xorg-team(a)lists.x.org Hi, im using X.Org X Server 1.7.3.902 (1.7.4 RC 2) with radeonhd xf86-video-radeonhd 1.3.0-1 my hardware is an AMD HD4730 with the following lspci -v: 01:00.0 VGA compatible controller: ATI Technologies Inc Device 944e (prog-if 00 [VGA controller]) Subsystem: Hightech Information System Ltd. Device 3000 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at febf0000 (64-bit, non-prefetchable) [size=64K] I/O ports at e000 [size=256] Expansion ROM at febc0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information <?> When X11 boots, the keyboard stops responding, on the screen the image thats displayed on the BIOS when it boots is shown all messed up. Everything works fine with the option: Option "NoAccel" "True" on xorg.conf Attached is my Xorg.0.log, i last run it into an error state with verbosity 7, after that i just booted as i usualy do (with the "NoAccel" option), i fear that nothing gets logged about the error because the computer just hangs. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 19976] New: RadeonHD: high HD3650 power usage
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=19976 Summary: RadeonHD: high HD3650 power usage Product: xorg Version: 7.4 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: niella(a)telkomsa.net QAContact: xorg-team(a)lists.x.org Created an attachment (id=22623) --> (http://bugs.freedesktop.org/attachment.cgi?id=22623) lspci Hi, I have a Lenovo W500 thinkpad. When I use fglrx in Xorg my laptop only consumes 15-16W, but fglrx is so unstable that it crashes on logout, and I despise using it. When I use the OPENSUSE 11.1 radeonhd driver, I have much improved stability (although no acceleration), but power usage also jumps to 35W! I have tried xorg-x11-driver-video-radeonhd-1.2.4_121202_4e89726-1.5 and even the latest xf86-video-radeonhd git version but they all behave the same. Interestingly, when I'm not in X I also have high power usage, whether or not fglrx or radeon modules are loaded or not. I suppose the graphics card is not running in low power modes without fglrx. The only way I can get low power usage is through using fglrx in an Xorg session... I have even tried the radeontool tip mentioned here - http://www.phoronix.com/forums/showthread.php?t=6522 - but it made no difference. Any ideas would be appreciated! cheers Niel -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 6

[Bug 22832] New: X server crashes while using crossover linux
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=22832 Summary: X server crashes while using crossover linux Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: thomas.mey(a)web.de QAContact: xorg-team(a)lists.x.org Created an attachment (id=27809) --> (http://bugs.freedesktop.org/attachment.cgi?id=27809) xorg server log X.Org X Server 1.6.1.901 (1.6.2 RC 1) Backtrace: 0: /usr/bin/Xorg(xorg_backtrace+0x3b) [0x812d07b] 1: /usr/bin/Xorg(xf86SigHandler+0x9e) [0x80c061e] 2: [0xb7ef5400] 3: /usr/lib/xorg/modules/drivers//radeonhd_drv.so [0xb777d4de] 4: /usr/bin/Xorg [0x80eed51] 5: /usr/bin/Xorg(RRCrtcGammaSet+0x99) [0x81596e9] 6: /usr/bin/Xorg [0x80ef9af] 7: /usr/bin/Xorg [0x80c8911] 8: /usr/bin/Xorg(xf86ChangeGamma+0x4b) [0x80c6b4b] 9: /usr/bin/Xorg(VidModeSetGamma+0x67) [0x80c3ee7] 10: /usr/lib/xorg/modules/extensions//libextmod.so [0xb784fd0c] 11: /usr/bin/Xorg(Dispatch+0x347) [0x80864d7] 12: /usr/bin/Xorg(main+0x395) [0x806baf5] 13: /lib/libc.so.6(__libc_start_main+0xe6) [0xb7a38a66] 14: /usr/bin/Xorg [0x806afa1] $ git describe 1.2.5-69-gb22e7a2 Chip is: ATI Technologies Inc M56P [Radeon Mobility X1600] -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 15

[Bug 26701] New: HDMI audio doesn't work on RS690
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=26701 Summary: HDMI audio doesn't work on RS690 Product: xorg Version: 7.4 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: eich(a)pdx.freedesktop.org ReportedBy: obsidian(a)paniert.org QAContact: xorg-team(a)lists.x.org Created an attachment (id=33492) --> (http://bugs.freedesktop.org/attachment.cgi?id=33492) xorg.conf I'm running Ubuntu 9.10 on an ASUS M2A-VM HDMI with radeonhd 1.3.0. HDMI audio output works in Windows, so the hardware seems ok. xorg.conf and Xorg.log are attached. aplay -l gives: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: SB [HDA ATI SB], device 1: ALC883 Digital [ALC883 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 There is no sound output for any mplayer or aplay command. I have unmuted SPDIF stuff with alsamixer in various combinations. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 20047] New: r6xx-r7xx-branch - XV Makes One Display Go Black
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=20047 Summary: r6xx-r7xx-branch - XV Makes One Display Go Black Product: xorg Version: git Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: cakristof(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=22785) --> (http://bugs.freedesktop.org/attachment.cgi?id=22785) xorg log My right display goes black at random intervals when using XV. When playing video both displays remain normal for 20-30 seconds before the right screen goes black. It remains black for 1-5 seconds before returning to normal. This is often followed by a succession of black screen events that are 1-10 seconds apart. This is followed by another 20-30 seconds of normality before the problem repeats. When the video is paused the black screens cease. When the video is unpaused they return. It doesn't matter which display the video window is on: left, right, or straddling both. The following players trigger the bug: mplayer, xine, totem I'm currently unable to try VLC. Hardware: Dual 1920x1200 LCD's Asus EAH3650 PCIe Card (RV635) Biostar TP45HP Q6600 Distribution: Debian Lenny Debian Packages: mplayer at 1:1.0.rc2svn20080706-0.1 xine-ui at 0.99.5+cvs20070914-2.1~lenny2 libxine1 at 1.1.14-5 libxine1-x at 1.1.14-5 totem at 2.22.2-5 linux-image-2.6.26-1-686 at 2.6.26-13 xserver-xorg at 7.3+18 XOrg GIT from r6xx-r7xx-support branch: drm is at commit 4cf376338cb96cc3b951415e7ebd9ef9e3339278 xf86-video-radeonhd is at commit 613299dcc30971e381b120b3bc3412d02e2b9aea P.S. It's exciting to see XV support so soon! -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 6

[Bug 20101] New: ati hd3300 (rs780d, 790gx) based mobo can not output anything to screen
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=20101 Summary: ati hd3300 (rs780d, 790gx) based mobo can not output anything to screen Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: abittner(a)stud.fh-heilbronn.de QAContact: xorg-team(a)lists.x.org Created an attachment (id=22901) --> (http://bugs.freedesktop.org/attachment.cgi?id=22901) various xorg.0.log and sax.log debug output messages. at the end of Xorg.0.log there is always: > Screen(s) found, but none have a usable configuration. although it detecs and finds graphics chipset, monitor (with proper name, resolution, capabilities, and so on). this is happening on opensuse 11.1 rtm and their related x11org repositories with newer xorg packages. mainboard: asus m3a78-t, with ati/amd 790gx chipset (radeon hd 3300), sideport 128meg onboard dedicated gfx memory. please see already detailed bugreport at novell/opensuse: https://bugzilla.novell.com/show_bug.cgi?id=470341 i really could need a fix for this complete fail at last. opensuse gfx detection tool sax2 works in vesa mode just fine. but fails in normal mode, when it tries to initialize the hd3300 and output to screen. thanks and regards. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 24976] New: Last update of ATI Radeon 3430 M82 hang my machine when Xorg start.
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=24976 Summary: Last update of ATI Radeon 3430 M82 hang my machine when Xorg start. Product: xorg Version: 7.4 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: major Priority: high Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: dfassi(a)gmail.com QAContact: xorg-team(a)lists.x.org Hi, I have funcional openSuSE 11.1 (Intel x86_64) with ATI Repository mapped to get last updates of my video drivers. All work fine for months , but with last updates video components, when X start chash the video and HANG COMPLETELLY my notebook, I only can power-off. Don't respond to CTRL-BACKSP nor CRTL-ALT-DEL , all stoped. My Notebook is : HP 6830s / Intel P8400 / 3GB / Radeon 3430 M82 ; Components updated by dependencies are: xorg-x11-server ( 7.4-17.6.1-x86_64) xorg-x11-driver-video ( 7.4-19.8.2-x86_64) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

[Bug 23605] New: Cannot change short DPMS timeouts
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=23605 Summary: Cannot change short DPMS timeouts Product: xorg Version: 7.4 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: adam(a)chasen.name QAContact: xorg-team(a)lists.x.org The DPMS standby/off timeout is very low and not consistent. Sometime the screens will shut off after a few seconds of no activity and other times a minute or two. The timeout is always short. I have attempted to use xset, but the only effect I can get is to force standby and turn off DPMS. Changing the timeout numbers does not appear to have any effect. I recently tried to change some DPMS settings in the xorg.conf unsuccessfully. My 'xset q' on initial startup: [achasen@localhost ~]$ xset q Keyboard Control: auto repeat: on key click percent: 0 LED mask: 00000000 auto repeat delay: 500 repeat rate: 30 auto repeating keys: 00ffffffdffffbbf fadfffefffedffff 9fffffffffffffff fff7ffffffffffff bell percent: 50 bell pitch: 400 bell duration: 100 Pointer Control: acceleration: 2/1 threshold: 4 Screen Saver: prefer blanking: yes allow exposures: yes timeout: 0 cycle: 0 Colors: default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215 Font Path: catalogue:/etc/X11/fontpath.d,built-ins,catalogue:/etc/X11/fontpath.d,built-ins DPMS (Energy Star): Standby: 0 Suspend: 0 Off: 0 DPMS is Enabled Monitor is On Font cache: Server does not have the FontCache Extension xrandr output: [achasen@localhost ~]$ xrandr -q --verbose Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 4000 x 2000 VGA_1 connected 1280x1024+1280+0 (0x3d) normal (normal left inverted right x axis y axis) 338mm x 270mm Identifier: 0x3b Timestamp: 18667 Subpixel: unknown Clones: DVI-D_1 CRTC: 1 CRTCs: 0 1 Panning: 0x0+0+0 Tracking: 0x0+0+0 Border: 0/0/0/0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: _PanningArea: _OutputNumber: 1 (0x00000001) ConnectorNumber: 1 (0x00000001) ConnectorType: VGA SignalFormat: VGA supported: VGA 1280x1024 (0x3d) 108.0MHz +HSync +VSync *current +preferred h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz 1280x1024 (0x3e) 135.0MHz +HSync +VSync h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz 1280x1024 (0x3f) 109.0MHz -HSync +VSync h: width 1280 start 1361 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz 1152x864 (0x40) 108.0MHz +HSync +VSync h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz v: height 864 start 865 end 868 total 900 clock 75.0Hz 1024x768 (0x41) 78.8MHz +HSync +VSync h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz v: height 768 start 769 end 772 total 800 clock 75.1Hz 1024x768 (0x42) 75.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz v: height 768 start 771 end 777 total 806 clock 70.1Hz 1024x768 (0x43) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 832x624 (0x44) 57.3MHz -HSync -VSync h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz v: height 624 start 625 end 628 total 667 clock 74.6Hz 800x600 (0x45) 50.0MHz +HSync +VSync h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz v: height 600 start 637 end 643 total 666 clock 72.2Hz 800x600 (0x46) 49.5MHz +HSync +VSync h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz v: height 600 start 601 end 604 total 625 clock 75.0Hz 800x600 (0x47) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x48) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 640x480 (0x49) 31.5MHz -HSync -VSync h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz v: height 480 start 481 end 484 total 500 clock 75.0Hz 640x480 (0x4a) 31.5MHz -HSync -VSync h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz v: height 480 start 489 end 491 total 520 clock 72.8Hz 640x480 (0x4b) 30.2MHz -HSync -VSync h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz v: height 480 start 483 end 486 total 525 clock 66.7Hz 640x480 (0x4c) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 60.0Hz 720x400 (0x4d) 28.3MHz -HSync +VSync h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz v: height 400 start 412 end 414 total 449 clock 70.1Hz DVI-D_1 connected 1280x1024+0+0 (0x3d) normal (normal left inverted right x axis y axis) 376mm x 301mm Identifier: 0x3c Timestamp: 18667 Subpixel: unknown Clones: VGA_1 CRTC: 0 CRTCs: 0 1 Panning: 0x0+0+0 Tracking: 0x0+0+0 Border: 0/0/0/0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: _HDMI: 0 (0x00000000) range: (0,1) _Coherent: 0 (0x00000000) range: (0,1) _Backlight: 0 (0x00000000) range: (0,255) _PanningArea: _OutputNumber: 2 (0x00000002) ConnectorNumber: 2 (0x00000002) ConnectorType: DVI-D SignalFormat: TMDS supported: TMDS 1280x1024 (0x3d) 108.0MHz +HSync +VSync *current +preferred h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz 1280x1024 (0x4e) 139.2MHz -HSync +VSync h: width 1280 start 1370 end 1507 total 1734 skew 0 clock 80.3KHz v: height 1024 start 1027 end 1034 total 1072 clock 74.9Hz 1280x1024 (0x3e) 135.0MHz +HSync +VSync h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz 1280x1024 (0x3f) 109.0MHz -HSync +VSync h: width 1280 start 1361 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz 1152x864 (0x40) 108.0MHz +HSync +VSync h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz v: height 864 start 865 end 868 total 900 clock 75.0Hz 1152x864 (0x4f) 104.8MHz -HSync +VSync h: width 1152 start 1227 end 1349 total 1546 skew 0 clock 67.8KHz v: height 864 start 867 end 871 total 905 clock 74.9Hz 1024x768 (0x50) 82.2MHz -HSync +VSync h: width 1024 start 1086 end 1194 total 1364 skew 0 clock 60.3KHz v: height 768 start 771 end 775 total 805 clock 74.9Hz 1024x768 (0x41) 78.8MHz +HSync +VSync h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz v: height 768 start 769 end 772 total 800 clock 75.1Hz 1024x768 (0x42) 75.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz v: height 768 start 771 end 777 total 806 clock 70.1Hz 1024x768 (0x43) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 832x624 (0x44) 57.3MHz -HSync -VSync h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz v: height 624 start 625 end 628 total 667 clock 74.6Hz 832x624 (0x51) 53.5MHz -HSync +VSync h: width 832 start 876 end 962 total 1092 skew 0 clock 49.0KHz v: height 624 start 627 end 631 total 654 clock 74.9Hz 800x600 (0x45) 50.0MHz +HSync +VSync h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz v: height 600 start 637 end 643 total 666 clock 72.2Hz 800x600 (0x46) 49.5MHz +HSync +VSync h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz v: height 600 start 601 end 604 total 625 clock 75.0Hz 800x600 (0x52) 49.2MHz -HSync +VSync h: width 800 start 841 end 923 total 1046 skew 0 clock 47.1KHz v: height 600 start 603 end 607 total 629 clock 74.9Hz 800x600 (0x47) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x48) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 640x480 (0x49) 31.5MHz -HSync -VSync h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz v: height 480 start 481 end 484 total 500 clock 75.0Hz 640x480 (0x4a) 31.5MHz -HSync -VSync h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz v: height 480 start 489 end 491 total 520 clock 72.8Hz 640x480 (0x53) 30.8MHz -HSync +VSync h: width 640 start 666 end 730 total 820 skew 0 clock 37.5KHz v: height 480 start 483 end 487 total 504 clock 74.4Hz 640x480 (0x4b) 30.2MHz -HSync -VSync h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz v: height 480 start 483 end 486 total 525 clock 66.7Hz 640x480 (0x4c) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 60.0Hz 720x400 (0x4d) 28.3MHz -HSync +VSync h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz v: height 400 start 412 end 414 total 449 clock 70.1Hz -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 19700] New: Black screen with HIS HD 4350
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=19700 Summary: Black screen with HIS HD 4350 Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: anonymous(a)dodgeit.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=22174) --> (http://bugs.freedesktop.org/attachment.cgi?id=22174) lspci of the graphics card Hello, I forward this bug for a Ubuntu user. Here is some more information from that user: "Ok, the attached xorg.conf and log are as requested. I have also included lspci -vvv for the video card. The card itself is a HIS HD 4350 (see www.hisdigital.com) 64bit card with onboard fan. These files were generated using radeonhd, trying to connect over DVI to an ASUS MK241H lcd monitor, which has a native resolution of 1920x1200. Please let me know if you need any more information" We tried setting HDP options ("off" and "swap"), but this didn't help. Attached are xorg.conf and the according log (with logverbose 7) and an lspci output for the graphics card. If you need any further information feel free to ask. By the way: The radeon driver works fine, but flickers. Should the severity be "blocker"? Thanks. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 18148] New: Virtual size too big for certain hardware
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=18148 Summary: Virtual size too big for certain hardware Product: xorg Version: git Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: felipe.contreras(a)gmail.com QAContact: xorg-team(a)lists.x.org The default virtual size for Mobility Radeon X1300 is too big, that makes DRI unusable and EXA in turn. For more details see bug #18096. (II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x01908000 (size = 0x00666000) (II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x01F6E000 (size = 0x01900000) (EE) RADEONHD(0): FB: Failed allocating DRI Depth Buffer (25600 KB) (EE) RADEONHD(0): DRI: Failed allocating buffers, disabling -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 13