September 2009 - Radeon HD - openSUSE Mailing Lists

donation site?
by Matthew Daniel 29 Sep '09

29 Sep '09

Hello, I am overwhelmingly grateful to have my shiny new HD 3200 fully operational, including HDMI audio, which was going to be a deal-breaker if it didn't pan out. This card is embedded on an ECS A780GM-A motherboard, and is reported by radeonhd as 0x9610:0x1019:0x1B61. I write to ask if there is a Paypal site for donating to the folks doing all this hard work? Or perhaps donations of hardware are more useful than money? In any case, please accept my heartfelt thanks for great work. My MythTV setup would not be the same without all of you. -- /v\atthew -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

3 3

Re: [radeonhd] X1300 3d Acceleration
by Yang Zhao 29 Sep '09

29 Sep '09

2009/9/28 Brian Hodgins <fatalnix(a)gmail.com>: > (**) RADEONHD(0): Selected XAA 2D acceleration. Use EXA instead, just to be safe. > (II) RADEONHD(0): Using 2560x2560 Framebuffer with 2560 pitch > ... > (II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x01908000 > (size = 0x00666000) > (II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x01F6E000 > (size = 0x01900000) > (EE) RADEONHD(0): FB: Failed allocating DRI Depth Buffer (25600 KB) > (EE) RADEONHD(0): DRI: Failed allocating buffers, disabling Set your Virtual size to as big as you actually practically need. When the allocated framebuffer is too big, it doesn't leave enough space for the driver to allocate buffers needed to make DRI work, which is what you're experiencing. Cheers, -- Yang Zhao http://yangman.ca -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 2

Fwd: 0x9612:0x1025:0x0206: Radeon HD 3200 Graphics
by Luiz Angelo Daros de Luca 29 Sep '09

29 Sep '09

And also plain text... --- Luiz Angelo Daros de Luca, Me. luizluca(a)gmail.com ---------- Forwarded message ---------- From: Luiz Angelo Daros de Luca <luizluca(a)gmail.com> Date: 2009/9/27 Subject: Fwd: 0x9612:0x1025:0x0206: Radeon HD 3200 Graphics To: radeonhd <radeonhd(a)opensuse.org> Sorry, no attachment allowed for this list. Access on this: https://docs.google.com/Doc?docid=0AZ4xzz44RpW6ZGRqZmpyNGdfMTMzaGZqNzJnaHI&… --- Luiz Angelo Daros de Luca, Me. luizluca(a)gmail.com ---------- Forwarded message ---------- From: Luiz Angelo Daros de Luca <luizluca(a)gmail.com> Date: 2009/9/27 Subject: 0x9612:0x1025:0x0206: Radeon HD 3200 Graphics To: radeonhd(a)opensuse.org Hello, SaX is unable to setup a config for my Acer 5536 Laptop. I runned: SaX2 -r -m 0=radeonhd I'm attaching the SaX log if it helps. I found this email address on the logs asking to send a message if the card didn't worked. So, it didn't :-) It runs fine with fglrx drivers. --- Luiz Angelo Daros de Luca, Me. luizluca(a)gmail.com -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 2

X1300 3d Acceleration
by Brian Hodgins 28 Sep '09

28 Sep '09

Hey, I have a desktop and laptop, both running Slackware 13 with Xorg 1.6.3. My desktop having an x1650 pro, works fine with 3d acceleration with radeonHD, no peoblems (Yay!). however, my ThinkPad T60 has an x1300 pci express (not integrated) card. I'm having some serious problems getting 3D Acceleration to work with this card. I figured it should be as simple as the x1650... I've tried using EXA and XAA acceleration with AccelMethod in my device section. here is my current xorg.conf, it is very minimalistic: ------------------------------ --- Section "Module" Load "dbe" Load "glx" Load "dri" EndSection Section "Monitor" Identifier "External" Option "RightOf" "Panel" EndSection Section "Monitor" Identifier "Panel" EndSection Section "Device" Identifier "MyCard" Driver "radeonhd" Option "monitor-VGA_1" "External" Option "monitor-PANEL" "Panel" Option "RROutputOrder" "PANEL" Option "AccelMethod" "XAA" EndSection Section "Screen" Identifier "MyScreen" Device "MyCard" DefaultDepth 24 SubSection "Display" Depth 24 ## This is superfluous and actually harmful with a ## static configuration. Enable for dynamic config only. #Virtual 2704 1050 EndSubSection EndSection --------------------------------- When i run glxinfo | grep render, I get Direct Rendering: Yes, and also OpenGL Render string: Software rasterizer. However, I did notice something a little strange in my xorg log. It seems that DRI buffers were loaded with RadeonHD, however right after it mentions that it couldnt load the DRI buffers, and disables DRI. Curious if anyone else might have had this issue, or know what might be wrong? -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1

0x9505:0x1002:0x2542: Saphire HD 3850 256 MB
by Jan Niklas Hasse 28 Sep '09

28 Sep '09

Hi there, I've got a Saphire HD 2850 with 256 MB Ram and I'm using radeonhd 1.2.5. I'm getting this message in Xorg.0.log: If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x9505:0x1002:0x2542: <name of board> and *please* describe the problems you are seeing in your message. My card does work, but 3D is very very slow and Compiz doesn't work. Please tell me if you need any more information. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 2

0x9591:0x1179:0xFF01: ATI Technologies Inc Mobility Radeon HD 3650
by Dawid Stefaniuk 27 Sep '09

27 Sep '09

Hello. I've been trying to get the ATI Mobility Radeon HD3650 card in my Toshiba Satellite A350-13A to run and as it stands, none of the drivers give me a working X session. I've disabled PAT support, compiled drm and drm_radeon from the 2.6.31 kernel as modules, tried mtrr_sanitizer, mtrr_unconver and booting with ram=2g. None of these help. Each time I end up with “cannot idle MC”. Thus I'm left with an unusable card. I'd really appreciate it if someone in the know could look into this. Needless to say, I'll run any necessary tests. This is the xorg.conf I'm using at the moment: Section "Device" Identifier "device1" Driver "radeonhd" EndSection And here is a full Xorg.0.log: This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.31-gentoo x86_64 Current Operating System: Linux eva 2.6.31-gentoo #13 SMP Sat Sep 26 00:39:43 Local time zone must be set--see zic x86_64 Build Date: 16 September 2009 11:55:35PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 26 00:42:58 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen Section". Using the first device section listed. (**) | |-->Device "device1" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/misc/"). (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ (==) ModulePath set to "/usr/lib64/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0xd20 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9591:1179:ff01 ATI Technologies Inc Mobilitiy Radeon HD 3650 rev 0, Mem @ 0xc0000000/536870912, 0xbfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "radeonhd" (II) Loading /usr/lib64/xorg/modules/drivers//radeonhd_drv.so (II) Module radeonhd: vendor="AMD GPG" compiled for 1.6.3.901, module version = 1.2.5 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices: RV505 : Radeon X1550, X1550 64bit. RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350. RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250. R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350. RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200. RV535 : Radeon X1300, X1650. RV550 : Radeon X2300 HD. RV560 : Radeon X1650. RV570 : Radeon X1950, X1950 GT; FireGL V7400. R580 : Radeon X1900, X1950; AMD Stream Processor. R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650. RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000. RV620 : Radeon HD 3450, HD 3470. RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630; FireGL V3600/V5600. RV635 : Radeon HD 3650, HD 3670. RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170. R680 : Radeon HD 3870 X2. M52 : Mobility Radeon X1300. M54 : Mobility Radeon X1400; M54-GL. M56 : Mobility Radeon X1600; Mobility FireGL V5200. M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200. M62 : Mobility Radeon X1350. M64 : Mobility Radeon X1450, X2300. M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250. M68 : Mobility Radeon X1900. M71 : Mobility Radeon HD 2300. M72 : Mobility Radeon HD 2400; Radeon E2400. M74 : Mobility Radeon HD 2400 XT. M76 : Mobility Radeon HD 2600; (Gemini ATI) Mobility Radeon HD 2600 XT. M82 : Mobility Radeon HD 3400. M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700. M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2. RS600 : Radeon Xpress 1200, Xpress 1250. RS690 : Radeon X1200, X1250, X1270. RS740 : RS740, RS740M. RS780 : Radeon HD 3100/3200/3300 Series. R700 : Radeon R700. RV710 : Radeon HD4570, HD4350. RV730 : Radeon HD4670, HD4650. RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED. RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro. RV790 : Radeon HD 4890. M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL. M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED. M96 : Mobility Radeon HD4600. M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED. M98 : Mobility Radeon HD4850, HD4870. (II) RADEONHD: version 1.2.5, built from git branch branch-master, commit ee508b37 (II) Primary Device is: PCI 01@00:00:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) RADEONHD(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Selected EXA 2D acceleration. (II) RADEONHD(0): Card not in database: 0x9591:0x1179:0xFF01; using generic modesetting. If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x9591:0x1179:0xFF01: <name of board> and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an M86 on an unidentified card (II) RADEONHD(0): Mapped IO @ 0xbfef0000 to 0x7fcb8643a000 (size 0x00010000) (II) RADEONHD(0): PCIE Card Detected (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1179 SubsystemID: 0xff01 IOBaseAddress: 0x2000 Filename: BR29796.001 BIOS Bootup Message: Tosh_Compal_LA_M86M_DDR2 M86 GDDR2_32Mx16 256bit 1024MB 600e/500m (II) RADEONHD(0): Analog TV Default Mode: 8 (II) RADEONHD(0): Found default TV Mode PAL (II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture. (II) RADEONHD(0): Using only 524288kB of the total 4194303kB. (--) RADEONHD(0): VideoRAM: 524288 kByte (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffb000 (II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffb000 (II) RADEONHD(0): Default Engine Clock: 600000 (II) RADEONHD(0): Default Memory Clock: 500000 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): Found libdri 5.4.0. drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) RADEONHD(0): Found libdrm 1.3.0. (II) RADEONHD(0): Found radeon drm 1.31.0. (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000) (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000) (II) RADEONHD(0): FirmwareInfo Revision 0104 (II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0 (II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 0 (II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 0 (II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0 (II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz (II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz (II) RADEONHD(0): Default Engine Clock: 600000 (II) RADEONHD(0): Default Memory Clock: 500000 (II) RADEONHD(0): Current Engine Clock: 13823570 (II) RADEONHD(0): Current Memory Clock: 9215710 (II) RADEONHD(0): Current Chip Voltage: 0 (II) RADEONHD(0): Power Management: used engine clock / memory clock / core (VDDC) voltage (0: ignore) (II) RADEONHD(0): Power Management: Raw Ranges (II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V (II) RADEONHD(0): Maximum 0 kHz / 0 kHz / 1.100 V (II) RADEONHD(0): Default 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): PowerPlayInfo Revision 0401 (II) RADEONHD(0): Power Management: Validated Ranges (II) RADEONHD(0): Minimum 110000 kHz / 250000 kHz / 0.900 V (II) RADEONHD(0): Maximum 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): Default 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): Power Management: Known Good Configurations (II) RADEONHD(0): 1 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): 2 110000 kHz / 405000 kHz / 0.900 V (II) RADEONHD(0): 3 300000 kHz / 500000 kHz / 0.900 V (II) RADEONHD(0): 4 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): 5 110000 kHz / 405000 kHz / 0.900 V (II) RADEONHD(0): 6 300000 kHz / 500000 kHz / 0.900 V (II) RADEONHD(0): 7 300000 kHz / 500000 kHz / 0.900 V (II) RADEONHD(0): 8 450000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): 9 450000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): 10 450000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): 11 300000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): 12 300000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): 13 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): 14 300000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): 15 300000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): Power Management: Final Levels (II) RADEONHD(0): Off 110000 kHz / 250000 kHz / 0.900 V (II) RADEONHD(0): Idle 300000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): Slow2D 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): Fast2D 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): Slow3D 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): Fast3D 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): Max3D 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): User 600000 kHz / 500000 kHz / 1.100 V (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_2, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, "LVDS LCD1", RHD_DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_KLDSKP_LVTMA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI_SINGLE, "HDMI_TYPE_A DFP1", RHD_DDC_3, RHD_HPD_0, { RHD_OUTPUT_UNIPHYA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[3] {RHD_CONNECTOR_TV, "7PIN_DIN TV1", RHD_DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } } (--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1 (II) RADEONHD(0): LVDS FPDI: 0x1 (II) RADEONHD(0): LVDS Duallink: 0x0 (II) RADEONHD(0): LVDS Grey Level: 0x3 (II) RADEONHD(0): LVDS SEQ Dig onto DE: 30 (II) RADEONHD(0): LVDS SEQ DE to BL: 360 (II) RADEONHD(0): LVDS Off Delay: 500 (II) RADEONHD(0): LVDS 24Bit: 0x0 (II) RADEONHD(0): LVDS Spatial Dither : 0x0 (II) RADEONHD(0): LVDS Temporal Dither : 0x1 (--) RADEONHD(0): Attaching Output UNIPHY_KLDSKP_LVTMA to Connector PANEL (--) RADEONHD(0): Attaching Output UNIPHY_A to Connector DVI-D 1 (--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN (II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A (II) RADEONHD(0): RandR: Adding RRoutput PANEL for Output UNIPHY_KLDSKP_LVTMA (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output UNIPHY_A (II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B (II) RADEONHD(0): Output VGA_1 has no monitor section (II) RADEONHD(0): Output VGA_1 has no monitor section (II) RADEONHD(0): Output PANEL has no monitor section (II) RADEONHD(0): Output DVI-D_1 has no monitor section (II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section (II) RADEONHD(0): DAC A: Sensed Output: VGA (II) RADEONHD(0): I2C device "RHD I2C line 2:E-EDID segment register" registered at address 0x60. (II) RADEONHD(0): I2C device "RHD I2C line 2:ddc2" registered at address 0xA0. (EE) RADEONHD(0): rhdAtomLvdsDDC: unknown record type: f8 (II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed (II) RADEONHD(0): Found native mode: Modeline "1366x768" 69.86 1366 1414 1446 1474 768 770 775 790 (WW) RADEONHD(0): No monitor size info, assuming 96dpi. (II) RADEONHD(0): Setting UNIPHY_A to incoherent (II) RADEONHD(0): I2C device "RHD I2C line 3:E-EDID segment register" registered at address 0x60. (II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" registered at address 0xA0. (II) RADEONHD(0): Output VGA_1 connected (II) RADEONHD(0): Output PANEL connected (II) RADEONHD(0): Output DVI-D_1 connected (II) RADEONHD(0): Output TV_7PIN_DIN disconnected (II) RADEONHD(0): Using fuzzy aspect match for initial modes (II) RADEONHD(0): Output VGA_1 using initial mode 1024x768 (II) RADEONHD(0): Output PANEL using initial mode 1024x768 (II) RADEONHD(0): Output DVI-D_1 using initial mode 1024x768 (II) RADEONHD(0): RandR 1.2 support enabled (==) RADEONHD(0): RGB weight 888 (==) RADEONHD(0): Default visual is TrueColor (==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0) (II) RADEONHD(0): Using 2560x2560 Framebuffer with 2560 pitch (II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x01900000) (==) RADEONHD(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib64/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x01908000 (size = 0x03331000) (II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x04C39000 (size = 0x01900000) (II) RADEONHD(0): FB: Allocated DRI Depth Buffer at offset 0x06539000 (size = 0x01900000) (II) RADEONHD(0): FB: Allocated GART table at offset 0x1FFF0000 (size = 0x00010000, end of FB) (II) RADEONHD(0): FB: Allocated DRI Textures at offset 0x07E39000 (size = 0x18000000) (II) RADEONHD(0): Using 16 MB GART aperture (II) RADEONHD(0): Using 2 MB for the ring buffer (II) RADEONHD(0): Using 2 MB for vertex/indirect buffers (II) RADEONHD(0): Using 12 MB for GART textures (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) RADEONHD(0): Mapped IO @ 0xbfef0000 to 0x7fcb8643a000 (size 0x00010000) (II) RADEONHD(0): Mapped FB @ 0xc0000000 to 0x7fcb62341000 (size 0x20000000) (WW) RADEONHD(0): rhdVGASaveFB: Unable to access the VGA framebuffer (0xFFFFFFFF) (II) RADEONHD(0): Attempting to enable power management (II) RADEONHD(0): Current Engine Clock: 13823570 (II) RADEONHD(0): Current Memory Clock: 9215710 (II) RADEONHD(0): Current Chip Voltage: 0 (EE) RADEONHD(0): D1CRTCDisable: Failed to Unsync CRTC 1 (EE) RADEONHD(0): rhdAllIdle: unable to stop CRTC: cannot idle MC Fatal server error: AddScreen/ScreenInit failed for driver 0 Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. And just to be on the safe side, here's /proc/mtrr: reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back reg02: base=0x100000000 ( 4096MB), size= 1024MB, count=1: write-back -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

[Bug 23877] Sometimes broken colors on HDMI
by bugzilla-daemon＠freedesktop.org 27 Sep '09

27 Sep '09

http://bugs.freedesktop.org/show_bug.cgi?id=23877 --- Comment #19 from Yang Zhao <yang(a)yangman.ca> 2009-09-26 17:00:19 PST --- Created an attachment (id=29872) --> (http://bugs.freedesktop.org/attachment.cgi?id=29872) Fix RHDLUTCopyForRR() being no-op Try the attached patch. It's for something that needs to be fixed anyway, but seeing what effect it has on this bug may be useful. Don't worry about having to attach the dumps in the future: it was enough to confirm that the tables are messed up. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

[Bug 23877] Sometimes broken colors on HDMI
by bugzilla-daemon＠freedesktop.org 26 Sep '09

26 Sep '09

http://bugs.freedesktop.org/show_bug.cgi?id=23877 --- Comment #18 from Rafał Miłecki <zajec5(a)gmail.com> 2009-09-26 16:17:17 PST --- Created an attachment (id=29870) --> (http://bugs.freedesktop.org/attachment.cgi?id=29870) rhd_dump -l 1 with gamma-fixed colors on Samsung HDTV After xgamma --gamma 0.9 -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team

1 0

[Bug 23877] Sometimes broken colors on HDMI
by bugzilla-daemon＠freedesktop.org 26 Sep '09

26 Sep '09

http://bugs.freedesktop.org/show_bug.cgi?id=23877 --- Comment #17 from Rafał Miłecki <zajec5(a)gmail.com> 2009-09-26 16:16:45 PST --- Created an attachment (id=29869) --> (http://bugs.freedesktop.org/attachment.cgi?id=29869) rhd_dump -l 1 when broken colors on Samsung HDTV -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team

1 0

[Bug 23877] Sometimes broken colors on HDMI
by bugzilla-daemon＠freedesktop.org 26 Sep '09

26 Sep '09

http://bugs.freedesktop.org/show_bug.cgi?id=23877 --- Comment #16 from Rafał Miłecki <zajec5(a)gmail.com> 2009-09-26 16:14:57 PST --- (In reply to comment #15) > So this is intermittent, and only affects CRTC1? Right, I've never seen that on PANEL which is controlled by CRTC0. I experienced this using HDMI controlled by CRTC1 using two different HDTVs: Samsung and Sony. > Does changing the gamma using `xradr --gamma ...' fix the corruption? Interesting, it did. I used "xrandr --gamma 0.9" and it fixed problem. Then I gone back to "xgamma --gamma 1.0" and it was still fine. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team

1 0