June 2008 - Radeon HD - openSUSE Mailing Lists

4870 - what about the future?
by Dexter Filmore 03 Jun '08

03 Jun '08

So you're getting there, R500 with DRI, UT2004... not bad. Congrats. What about the future? So you got specs for the R500/600 - did ATi/AMD ever drop a word on whether they will release specs for future GPUs as well? Dex -- -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GCS d--(+)@ s-:+ a- C++++ UL++ P+>++ L+++>++++ E-- W++ N o? K- w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h>++ r* y? ------END GEEK CODE BLOCK------ http://www.vorratsdatenspeicherung.de -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

5 12

0x791E:0x1043:0x8287: ATI Radeon 1250
by R.M. Thomas 03 Jun '08

03 Jun '08

> If - and only if - your card does not work or does not work optimally > please contact radeonhd(a)opensuse.org to help rectify this. > Use the subject: 0x791E:0x1043:0x8287: <name of board> > and *please* describe the problems you are seeing > in your message. I have yesterday/today tried to set up DRI for the radeonhd driver by following the guide at http://www.x.org/wiki/radeonhd:DRI Problems: Do not get DRI. drmOpenDevice cannot open /dev/dri/card0. Fall back on swrast_dri.so. No keyboard or mouse in X after reboot. Hardware: Asus P2-M2A690G, onboard ATI Radeon 1250, AMD Athlon64 X2 Dual Core 4800+ Software: Ubuntu Hardy 32-bit. Attached hereto for information: /usr/var/log/Xorg.0.log - generated after startx /var/log/dmesg - generated after subsequent reboot gitradeonhd.sh - the script I wrote to download and build everything. Remark: fglrx was working on this machine (but too buggy to be usable). Hope this helps. (Probably I've just overlooked something obvious.) Regards, Mike Thomas [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-17-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 14:31:33 UTC 2008 (Ubuntu 2.6.24-17.31-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fb0000 (usable) [ 0.000000] BIOS-e820: 0000000037fb0000 - 0000000037fbe000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037fbe000 - 0000000037fe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037fe0000 - 0000000038000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 895MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 229296) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229296 [ 0.000000] HighMem 229296 -> 229296 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 229296 [ 0.000000] On node 0 totalpages: 229296 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1759 pages used for memmap [ 0.000000] Normal zone: 223441 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00FB430 checksum 0 [ 0.000000] ACPI: RSDP 000FB430, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 37FB0000, 0040 (r1 _ASUS_ Notebook 1000816 MSFT 97) [ 0.000000] ACPI: FACP 37FB0200, 0084 (r2 A_M_I_ OEMFACP 1000816 MSFT 97) [ 0.000000] ACPI: DSDT 37FB05B0, 6A13 (r1 A0725 A0725001 1 INTL 20051117) [ 0.000000] ACPI: FACS 37FBE000, 0040 [ 0.000000] ACPI: APIC 37FB0390, 005C (r1 A_M_I_ OEMAPIC 1000816 MSFT 97) [ 0.000000] ACPI: MCFG 37FB03F0, 003C (r1 A_M_I_ OEMMCFG 1000816 MSFT 97) [ 0.000000] ACPI: SLIC 37FB0430, 0176 (r1 _ASUS_ Notebook 1000816 MSFT 97) [ 0.000000] ACPI: OEMB 37FBE040, 0080 (r1 A_M_I_ AMI_OEM 1000816 MSFT 97) [ 0.000000] ACPI: HPET 37FB6FD0, 0038 (r1 A_M_I_ OEMHPET 1000816 MSFT 97) [ 0.000000] ACPI: SSDT 37FB7010, 028A (r1 A_M_I_ POWERNOW 1 AMD 1) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 38000000:c7f00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227505 [ 0.000000] Kernel command line: root=UUID=0051209e-fdcb-4e61-9c73-5072624fe33a ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2493.812 MHz processor. [ 22.198305] Console: colour VGA+ 80x25 [ 22.198308] console [tty0] enabled [ 22.198668] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 22.199018] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 22.213128] Memory: 897156k/917184k available (2176k kernel code, 19444k reserved, 1007k data, 368k init, 0k highmem) [ 22.213134] virtual kernel memory layout: [ 22.213135] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 22.213136] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 22.213137] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 22.213138] lowmem : 0xc0000000 - 0xf7fb0000 ( 895 MB) [ 22.213139] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 22.213139] .data : 0xc0320134 - 0xc041bdc4 (1007 kB) [ 22.213140] .text : 0xc0100000 - 0xc0320134 (2176 kB) [ 22.213143] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 22.213168] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 22.213274] hpet clockevent registered [ 22.293398] Calibrating delay using timer specific routine.. 5142.41 BogoMIPS (lpj=10284825) [ 22.293414] Security Framework initialized [ 22.293419] SELinux: Disabled at boot. [ 22.293429] AppArmor: AppArmor initialized [ 22.293431] Failure registering capabilities with primary security module. [ 22.293438] Mount-cache hash table entries: 512 [ 22.293522] Initializing cgroup subsys ns [ 22.293525] Initializing cgroup subsys cpuacct [ 22.293533] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 22.293539] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.293541] CPU: L2 Cache: 512K (64 bytes/line) [ 22.293543] CPU 0(2) -> Core 0 [ 22.293545] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 22.293552] Compat vDSO mapped to ffffe000. [ 22.293559] Checking 'hlt' instruction... OK. [ 22.309584] SMP alternatives: switching to UP code [ 22.310508] Early unpacking initramfs... done [ 22.566920] ACPI: Core revision 20070126 [ 22.566977] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 22.569607] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02 [ 22.569622] SMP alternatives: switching to SMP code [ 22.570024] Booting processor 1/1 eip 3000 [ 22.581048] Initializing CPU#1 [ 22.661515] Calibrating delay using timer specific routine.. 4987.46 BogoMIPS (lpj=9974928) [ 22.661521] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 22.661526] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.661527] CPU: L2 Cache: 512K (64 bytes/line) [ 22.661529] CPU 1(2) -> Core 1 [ 22.661530] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 22.661027] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02 [ 22.661039] Total of 2 processors activated (10129.87 BogoMIPS). [ 22.661179] ENABLING IO-APIC IRQs [ 22.661347] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 22.808459] Brought up 2 CPUs [ 22.808483] CPU0 attaching sched-domain: [ 22.808485] domain 0: span 03 [ 22.808486] groups: 01 02 [ 22.808489] CPU1 attaching sched-domain: [ 22.808490] domain 0: span 03 [ 22.808491] groups: 02 01 [ 22.808657] net_namespace: 64 bytes [ 22.808663] Booting paravirtualized kernel on bare hardware [ 22.809007] Time: 16:17:43 Date: 05/31/08 [ 22.809030] NET: Registered protocol family 16 [ 22.809176] EISA bus registered [ 22.809180] ACPI: bus type pci registered [ 22.809937] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 22.809939] PCI: Using configuration type 1 [ 22.809941] Setting up standard PCI resources [ 22.817020] ACPI: EC: Look up EC in DSDT [ 22.820827] ACPI: Interpreter enabled [ 22.820829] ACPI: (supports S0 S1 S3 S4 S5) [ 22.820842] ACPI: Using IOAPIC for interrupt routing [ 22.821035] Error attaching device data [ 22.821039] Error attaching device data [ 22.827159] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.827341] pci 0000:00:12.0: set SATA to AHCI mode [ 22.830235] PCI: Transparent bridge - 0000:00:14.4 [ 22.830260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.830402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 22.830477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 22.830548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 22.830627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 22.844081] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15) [ 22.844178] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15) [ 22.844274] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) [ 22.844383] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) [ 22.844477] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15) [ 22.844572] ACPI: PCI Interrupt Link [LNKF] (IRQs *9) [ 22.844664] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) [ 22.844758] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *7 10 11 12 14 15) [ 22.844852] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 18, should be 17 [20070126] [ 22.844858] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.844881] pnp: PnP ACPI init [ 22.844886] ACPI: bus type pnp registered [ 22.847398] pnp: PnP ACPI: found 15 devices [ 22.847399] ACPI: ACPI bus type pnp unregistered [ 22.847402] PnPBIOS: Disabled by ACPI PNP [ 22.847572] PCI: Using ACPI for IRQ routing [ 22.847574] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.876271] NET: Registered protocol family 8 [ 22.876272] NET: Registered protocol family 20 [ 22.876300] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 22.876304] hpet0: 4 32-bit timers, 14318180 Hz [ 22.877341] AppArmor: AppArmor Filesystem Enabled [ 22.880259] Time: hpet clocksource has been installed. [ 22.880272] Switched to high resolution mode on CPU 0 [ 22.881050] Switched to high resolution mode on CPU 1 [ 22.888244] system 00:01: iomem range 0x38000000-0x3fffffff has been reserved [ 22.888251] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 22.888253] system 00:07: ioport range 0x40b-0x40b has been reserved [ 22.888255] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 22.888257] system 00:07: ioport range 0xc00-0xc01 has been reserved [ 22.888259] system 00:07: ioport range 0xc14-0xc14 has been reserved [ 22.888261] system 00:07: ioport range 0xc50-0xc51 has been reserved [ 22.888263] system 00:07: ioport range 0xc52-0xc52 has been reserved [ 22.888265] system 00:07: ioport range 0xc6c-0xc6c has been reserved [ 22.888267] system 00:07: ioport range 0xc6f-0xc6f has been reserved [ 22.888269] system 00:07: ioport range 0xcd0-0xcd1 has been reserved [ 22.888271] system 00:07: ioport range 0xcd2-0xcd3 has been reserved [ 22.888273] system 00:07: ioport range 0xcd4-0xcd5 has been reserved [ 22.888275] system 00:07: ioport range 0xcd6-0xcd7 has been reserved [ 22.888277] system 00:07: ioport range 0xcd8-0xcdf has been reserved [ 22.888279] system 00:07: ioport range 0x800-0x89f has been reserved [ 22.888281] system 00:07: ioport range 0xb10-0xb1f has been reserved [ 22.888284] system 00:07: ioport range 0x900-0x90f has been reserved [ 22.888286] system 00:07: ioport range 0x910-0x91f has been reserved [ 22.888288] system 00:07: ioport range 0xfe00-0xfefe has been reserved [ 22.888290] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved [ 22.888293] system 00:07: iomem range 0xfff00000-0xffffffff could not be reserved [ 22.888297] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved [ 22.888299] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 22.888302] system 00:08: iomem range 0xfe000000-0xfe00001f has been reserved [ 22.888307] system 00:0b: ioport range 0x230-0x23f has been reserved [ 22.888309] system 00:0b: ioport range 0x290-0x29f has been reserved [ 22.888311] system 00:0b: ioport range 0xa20-0xa2f has been reserved [ 22.888313] system 00:0b: ioport range 0xa30-0xa3f has been reserved [ 22.888317] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 22.888322] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 22.888324] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 22.888326] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 22.888329] system 00:0e: iomem range 0x100000-0x37ffffff could not be reserved [ 22.888331] system 00:0e: iomem range 0x0-0x0 could not be reserved [ 22.918598] PCI: Bridge: 0000:00:01.0 [ 22.918600] IO window: d000-dfff [ 22.918603] MEM window: fe800000-fe9fffff [ 22.918605] PREFETCH window: f0000000-f7ffffff [ 22.918607] PCI: Bridge: 0000:00:06.0 [ 22.918608] IO window: disabled. [ 22.918611] MEM window: disabled. [ 22.918612] PREFETCH window: disabled. [ 22.918615] PCI: Bridge: 0000:00:07.0 [ 22.918616] IO window: disabled. [ 22.918618] MEM window: fea00000-feafffff [ 22.918620] PREFETCH window: disabled. [ 22.918623] PCI: Bridge: 0000:00:14.4 [ 22.918625] IO window: e000-efff [ 22.918630] MEM window: feb00000-febfffff [ 22.918634] PREFETCH window: disabled. [ 22.918653] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 22.918659] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 22.918674] NET: Registered protocol family 2 [ 22.956184] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 22.956429] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 22.957249] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 22.957678] TCP: Hash tables configured (established 131072 bind 65536) [ 22.957680] TCP reno registered [ 22.968228] checking if image is initramfs... it is [ 23.441104] Freeing initrd memory: 7296k freed [ 23.442528] audit: initializing netlink socket (disabled) [ 23.442541] audit(1212250663.124:1): initialized [ 23.444196] VFS: Disk quotas dquot_6.5.1 [ 23.444252] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 23.444350] io scheduler noop registered [ 23.444352] io scheduler anticipatory registered [ 23.444353] io scheduler deadline registered [ 23.444361] io scheduler cfq registered (default) [ 23.595865] Boot video device is 0000:01:05.0 [ 23.596015] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 23.596036] assign_interrupt_mode Found MSI capability [ 23.596058] Allocate Port Service[0000:00:06.0:pcie00] [ 23.596087] Allocate Port Service[0000:00:06.0:pcie02] [ 23.596140] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 23.596159] assign_interrupt_mode Found MSI capability [ 23.596177] Allocate Port Service[0000:00:07.0:pcie00] [ 23.596363] isapnp: Scanning for PnP cards... [ 23.949828] isapnp: No Plug & Play device found [ 23.972896] Real Time Clock Driver v1.12ac [ 23.973078] hpet_resources: 0xfed00000 is busy [ 23.973109] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.973249] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.973807] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.974442] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 23.974495] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 23.974573] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 23.974897] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.974901] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 23.988266] mice: PS/2 mouse device common for all mice [ 23.988367] EISA: Probing bus 0 at eisa.0 [ 23.988401] Cannot allocate resource for EISA slot 8 [ 23.988402] EISA: Detected 0 cards. [ 23.988405] cpuidle: using governor ladder [ 23.988407] cpuidle: using governor menu [ 23.988483] NET: Registered protocol family 1 [ 23.988504] Using IPI No-Shortcut mode [ 23.988536] registered taskstats version 1 [ 23.988637] Magic number: 8:739:288 [ 23.988654] hash matches device ttyz2 [ 23.988754] hash matches device tty21 [ 23.988786] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 23.988788] EDD information not available. [ 23.989024] Freeing unused kernel memory: 368k freed [ 24.023167] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 25.152809] fuse init (API version 7.9) [ 25.167915] ACPI: duty_cycle spans bit 4 [ 25.410261] SCSI subsystem initialized [ 25.428305] usbcore: registered new interface driver usbfs [ 25.428325] usbcore: registered new interface driver hub [ 25.437183] libata version 3.00 loaded. [ 25.439306] usbcore: registered new device driver usb [ 25.439906] ahci 0000:00:12.0: version 3.0 [ 25.439941] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 25.439963] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 25.439965] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 25.444285] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 25.489999] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 25.490005] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 25.493127] USB Universal Host Controller Interface driver v3.0 [ 26.438673] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 26.438678] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [ 26.439028] scsi0 : ahci [ 26.439280] scsi1 : ahci [ 26.439373] scsi2 : ahci [ 26.439463] scsi3 : ahci [ 26.439523] ata1: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff900 irq 16 [ 26.439526] ata2: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff980 irq 16 [ 26.439529] ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 16 [ 26.439533] ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 16 [ 26.751846] ata1: SATA link down (SStatus 0 SControl 300) [ 27.226098] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.246634] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7 [ 27.246636] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 27.248615] ata2.00: configured for UDMA/133 [ 27.558567] ata3: SATA link down (SStatus 0 SControl 300) [ 27.869078] ata4: SATA link down (SStatus 0 SControl 300) [ 27.868476] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 27.869779] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 27.869792] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 27.870053] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 27.870071] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfe7fe000 [ 27.875509] Driver 'sd' needs updating - please use bus_type methods [ 27.886089] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 27.886100] sd 1:0:0:0: [sda] Write Protect is off [ 27.886102] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.886117] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.886157] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 27.886165] sd 1:0:0:0: [sda] Write Protect is off [ 27.886167] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.886179] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.886182] sda: sda1 sda2 < sda5 > [ 27.927689] sd 1:0:0:0: [sda] Attached SCSI disk [ 27.928479] usb usb1: configuration #1 chosen from 1 choice [ 27.928500] hub 1-0:1.0: USB hub found [ 27.928508] hub 1-0:1.0: 2 ports detected [ 27.930862] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 28.032207] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 28.032223] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 28.032242] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 28.032259] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fd000 [ 28.092205] usb usb2: configuration #1 chosen from 1 choice [ 28.092224] hub 2-0:1.0: USB hub found [ 28.092232] hub 2-0:1.0: 2 ports detected [ 28.195936] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 28.195951] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 28.195969] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 28.195986] ohci_hcd 0000:00:13.2: irq 19, io mem 0xfe7fc000 [ 28.255929] usb usb3: configuration #1 chosen from 1 choice [ 28.255950] hub 3-0:1.0: USB hub found [ 28.255957] hub 3-0:1.0: 2 ports detected [ 28.359659] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 18 [ 28.359673] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 28.359696] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 28.359709] ohci_hcd 0000:00:13.3: irq 18, io mem 0xfe7fb000 [ 28.419667] usb usb4: configuration #1 chosen from 1 choice [ 28.419685] hub 4-0:1.0: USB hub found [ 28.419692] hub 4-0:1.0: 2 ports detected [ 28.523396] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19 [ 28.523408] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 28.523424] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 28.523436] ohci_hcd 0000:00:13.4: irq 19, io mem 0xfe7fa000 [ 28.583417] usb usb5: configuration #1 chosen from 1 choice [ 28.583435] hub 5-0:1.0: USB hub found [ 28.583442] hub 5-0:1.0: 2 ports detected [ 28.687437] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20 [ 28.687449] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 28.687472] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 28.687508] ehci_hcd 0000:00:13.5: debug port 1 [ 28.687519] ehci_hcd 0000:00:13.5: irq 20, io mem 0xfe7ff000 [ 28.699059] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.699165] usb usb6: configuration #1 chosen from 1 choice [ 28.699186] hub 6-0:1.0: USB hub found [ 28.699191] hub 6-0:1.0: 10 ports detected [ 28.803686] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 [ 28.802993] ACPI: PCI Interrupt 0000:04:09.2[C] -> <6>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 28.803001] GSI 20 (level, low) -> IRQ 21 [ 28.803711] SB600_PATA: not 100% native mode: will probe irqs later [ 28.803721] ide0: BM-DMA at 0xff00-0xff07<6>ehci_hcd 0000:04:09.2: EHCI Host Controller [ 28.803730] , BIOS settings: hda:DMA, hdb:pio [ 28.803736] Probing IDE interface ide0... [ 28.803039] ehci_hcd 0000:04:09.2: new USB bus registered, assigned bus number 7 [ 28.803089] ehci_hcd 0000:04:09.2: irq 21, io mem 0xfebff400 [ 28.814868] ehci_hcd 0000:04:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.814937] usb usb7: configuration #1 chosen from 1 choice [ 28.814959] hub 7-0:1.0: USB hub found [ 28.814964] hub 7-0:1.0: 4 ports detected [ 29.086436] usb 6-9: new high speed USB device using ehci_hcd and address 2 [ 29.308714] usb 6-9: configuration #1 chosen from 1 choice [ 29.546431] usb 7-1: new high speed USB device using ehci_hcd and address 2 [ 29.680108] usb 7-1: configuration #1 chosen from 1 choice [ 29.680151] usbcore: registered new interface driver libusual [ 29.684006] Initializing USB Mass Storage driver... [ 29.684067] scsi4 : SCSI emulation for USB Mass Storage devices [ 29.684121] usbcore: registered new interface driver usb-storage [ 29.684124] USB Mass Storage support registered. [ 29.684208] usb-storage: device found at 2 [ 29.684209] usb-storage: waiting for device to settle before scanning [ 30.209747] hda: ATAPI DVD A DH20A4P, ATAPI CD/DVD-ROM drive [ 30.209777] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 30.210215] hda: UDMA/66 mode selected [ 30.210583] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 30.222880] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 30.222896] uhci_hcd 0000:04:09.0: UHCI Host Controller [ 30.222927] uhci_hcd 0000:04:09.0: new USB bus registered, assigned bus number 8 [ 30.222961] uhci_hcd 0000:04:09.0: irq 16, io base 0x0000e400 [ 30.223075] usb usb8: configuration #1 chosen from 1 choice [ 30.223093] hub 8-0:1.0: USB hub found [ 30.223098] hub 8-0:1.0: 2 ports detected [ 30.324616] ACPI: PCI Interrupt 0000:04:09.1[B] -> GSI 23 (level, low) -> IRQ 22 [ 30.324630] uhci_hcd 0000:04:09.1: UHCI Host Controller [ 30.324650] uhci_hcd 0000:04:09.1: new USB bus registered, assigned bus number 9 [ 30.324685] uhci_hcd 0000:04:09.1: irq 22, io base 0x0000e000 [ 30.324787] usb usb9: configuration #1 chosen from 1 choice [ 30.324804] hub 9-0:1.0: USB hub found [ 30.324809] hub 9-0:1.0: 2 ports detected [ 30.429158] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 30.481823] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 30.497636] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 30.497643] Uniform CD-ROM driver Revision: 3.20 [ 31.750397] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800017d9b3e] [ 33.238099] kjournald starting. Commit interval 5 seconds [ 33.238112] EXT3-fs: mounted filesystem with ordered data mode. [ 34.674507] usb-storage: device scan complete [ 34.704699] scsi 4:0:0:0: Direct-Access Generic 2.0 Reader-CF 1.00 PQ: 0 ANSI: 0 CCS [ 34.734902] scsi 4:0:0:1: Direct-Access Generic 2.0 Reader-Multi 1.00 PQ: 0 ANSI: 0 CCS [ 34.736166] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 34.736190] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 34.737153] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 34.737171] sd 4:0:0:1: Attached scsi generic sg2 type 0 [ 39.887687] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 40.269988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 40.332929] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 40.445337] Linux agpgart interface v0.102 [ 40.506945] input: Power Button (FF) as /devices/virtual/input/input3 [ 40.560487] ACPI: Power Button (FF) [PWRF] [ 40.560588] input: Power Button (CM) as /devices/virtual/input/input4 [ 40.616425] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 40.624311] ACPI: Power Button (CM) [PWRB] [ 41.126431] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 20 [ 41.126443] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 41.126460] atl1 0000:03:00.0: version 2.0.7 [ 41.220350] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 41.246841] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 41.263524] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input5 [ 41.278917] ACPI: PCI Interrupt 0000:01:05.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 41.498385] dib0700: loaded with support for 5 different device-types [ 41.498611] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 42.390744] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' [ 42.602250] dib0700: firmware started successfully. [ 42.766954] NET: Registered protocol family 10 [ 42.767142] lo: Disabled Privacy Extensions [ 42.767403] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.768297] atl1 0000:03:00.0: eth0 link is up 100 Mbps full duplex [ 42.769328] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 43.101103] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 43.101173] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 43.101516] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 43.214564] DVB: registering frontend 0 (DiBcom 3000MC/P)... [ 43.247895] MT2060: successfully identified (IF1 = 1220) [ 43.724264] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 43.724466] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 43.730141] DVB: registering frontend 1 (DiBcom 3000MC/P)... [ 43.734871] MT2060: successfully identified (IF1 = 1220) [ 44.288451] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.4/0000:04:09.2/usb7/7-1/input/input6 [ 44.324152] dvb-usb: schedule remote query interval to 150 msecs. [ 44.324158] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 44.324354] usbcore: registered new interface driver dvb_usb_dib0700 [ 44.441121] loop: module loaded [ 44.480325] lp: driver loaded but no devices found [ 44.630219] Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k [ 45.164205] EXT3 FS on sda1, internal journal [ 45.762643] ip_tables: (C) 2000-2006 Netfilter Core Team

3 4

new release - when?
by Adam Williamson 02 Jun '08

02 Jun '08

Well, see subject :) When will there be a new release? It'd be nice to backport the new stuff (particularly rs780 support) to our last stable release, but I'd prefer only to backport releases rather than arbitrary git snapshots. So is there a plan for the next release date? -- adamw -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1