November 2007 - Radeon HD - openSUSE Mailing Lists

xf86-video-radeonhd:initial-randr: 2 commit(s)
by mhopf＠kemper.freedesktop.org 16 Nov '07

16 Nov '07

Reporting from xf86-video-radeonhd: Radeon HD video driver Please visit: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd Or get your own copy by using: git-clone git://anongit.freedesktop.org/xorg/driver/xf86-video-radeonhd 2 commits against initial-randr at df5487f9...: src/rhd_randr.c | 197 ++++++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 155 insertions(+), 42 deletions(-) commit dce9ffc402511d0820c0fcdd7228e1f2ce8571fc Author: Matthias Hopf <mhopf(a)suse.de> Date: Fri Nov 16 20:33:40 2007 +0100 Add potential RandR 1.3 output properties. This adds the following (immutable) properties to every output, as partially described for discussion in an randrproto.txt diff on xorg-devel: RANDR_SIGNAL_FORMAT Type: string Range/List: unknown VGA TMDS LVDS FBAS SVideo YPbPr DisplayPort Signal format / physical protocol format that is used for the specified output. A driver MAY change this property of an output if the underlying hardware indicates a protocol change (e.g. TV formats). RANDR_CONNECTOR_TYPE Type: string Range/List: unknown VGA DVI DVI-I DVI-A DVI-D HDMI internal TV TV-FBAS TV-SVideo TV-YPbPr TV-SCART TV-C4 DisplayPort Connector type, as far as known to the driver. Values with dashes (TV-FBAS) describe more specific versions of the base values (TV). The former SHOULD be used if the connector is not capable of producing other signal formats. The later SHOULD be used if the exact connector is unknown, or the connector is a multi-format connector that is not described otherwise. 'internal' describes laptop-internal (normally LVDS) displays. 'TV' and 'TV-SCART' with signal format 'VGA' are valid combinations and describe RGB TV signals. RANDR_CONNECTOR_NUMBER Type: int32 Range/List: 0- Outputs that route their signal to the same connector MUST have the same connector number. Outputs with the same connector number MUST route their signal to the same connector, except if it is 0, which indicates unknown connectivity. 1 is called the primary connector, 2 the secondary. 3 is often a TV connector, but that is completely driver / hardware dependent. Outputs with the same connector number SHOULD have the same connector type. Meaning and client behavior for mismatching connector types is undefined at the moment. RANDR_OUTPUT_NUMBER Type: int32 Range/List: 0- A card may route one internal output to several connectors. Connectors that are driven by the same output cannot be driven by different Crtcs and are thus only allowed to be used in clone mode. The driver SHOULD emit an error message and continue as gracefully as possible if using different Crtcs for the same internal output is requested. Internal outputs are numbered from 1, 0 indicates that output routing is unknown. diffstat: src/rhd_randr.c | 145 +++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 132 insertions(+), 13 deletions(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… commit e4c4c44bd61e72c00a8769ceebc0e3bdc15742b8 Author: Matthias Hopf <mhopf(a)suse.de> Date: Fri Nov 16 18:03:18 2007 +0100 Cleanup. Also documented one of the more exotic error messages. diffstat: src/rhd_randr.c | 58 +++++++++++++++++++++++----------------------------- 1 file changed, 26 insertions(+), 32 deletions(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

xf86-video-radeonhd:master: 1 commit(s)
by libv＠kemper.freedesktop.org 16 Nov '07

16 Nov '07

Reporting from xf86-video-radeonhd: Radeon HD video driver Please visit: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd Or get your own copy by using: git-clone git://anongit.freedesktop.org/xorg/driver/xf86-video-radeonhd Commit against master at 78954e2c...: commit dbb073b8b314264e311c3a1ebecd13d93e9627a6 Author: Luc Verhaegen <libv(a)skynet.be> Date: Fri Nov 16 19:36:24 2007 +0100 ID: Fix up Macbook pro. This one has a rather awkward atombios connector table and requires an id based workaround. Thanks to Jerome Glisse. diffstat: src/rhd_id.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

xf86-video-radeonhd:initial-randr: 1 commit(s)
by mhopf＠kemper.freedesktop.org 16 Nov '07

16 Nov '07

Reporting from xf86-video-radeonhd: Radeon HD video driver Please visit: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd Or get your own copy by using: git-clone git://anongit.freedesktop.org/xorg/driver/xf86-video-radeonhd Commit against initial-randr at 9031b870...: commit df5487f9f869da26062f8229e678fddef9c5f065 Author: Matthias Hopf <mhopf(a)suse.de> Date: Fri Nov 16 15:48:01 2007 +0100 Reordering ScreenInit(). Now closer to original order again. Fixes 16bit. diffstat: src/rhd_driver.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

RE: [radeonhd] RV515 card failed to output video on VGA port
by Wu, Lisa 16 Nov '07

16 Nov '07

Hi, I have been acting like a fool, at last I know how to generate a git+AF8-version.h And I found with the latest git code, this issue no longer exists. Thanks so much for your help+ACE- Best Regards, Lisa Wu -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1

Re: [radeonhd] No X and Unknown card detected - PowerColor X1950 Pro AGP
by Egbert Eich 14 Nov '07

14 Nov '07

David Morgado writes: > Hi, > As the subject states X is unable to start. > > I have this RV570 based card: > PowerColor X1950 Pro AGP > > This card has dual DVI connectors and 512MB GDDR3, and a bunch of video > out stuff but that is not important for now. > > The id is 0x7280:0x148C:0x2223 > Xorg.0.log, conntest results and VBIOS dump fallow attached. > > I hope I did all this correctly since I don't know what to expect from > rhd_conntest output. > Thank you very much for all the output! You tried all different combos of monitors/connectors, weren't you able to get X to start on any of them? Your problem seems to be releated to using the DVI-I 2 connector which seems to use the LVTMA: (--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I CRT1 DFP3 (EE) RADEONHD(0): RHDLVTMAInit: unhandled connector type: 2 (--) RADEONHD(0): Attaching Output DAC B to Connector SVIDEO TV1 (--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I DFP1 CRT2 (--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I DFP1 CRT2 However TMSA on LVTMA isn't supported ATM. Luc is working on that. In the mean time connecting the digital input of your monitor to the other DVI-I connector (or using VGA) should help. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

4 4

xf86-video-radeonhd:initial-randr: 2 commit(s)
by mhopf＠kemper.freedesktop.org 14 Nov '07

14 Nov '07

Reporting from xf86-video-radeonhd: Radeon HD video driver Please visit: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd Or get your own copy by using: git-clone git://anongit.freedesktop.org/xorg/driver/xf86-video-radeonhd 2 commits against initial-randr at 5c174fe4...: src/rhd_randr.c | 74 +++++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 55 insertions(+), 19 deletions(-) commit fcca0f2e351b953a00c19713ed868b84da89807d Author: Matthias Hopf <mhopf(a)suse.de> Date: Wed Nov 14 17:14:06 2007 +0100 Don't shut down outputs that have active connectors attached. Something that cannot be solved with the current RandR model is that multiple connectors might be attached to the same output. They cannot be driven with different crtcs then, but RandR sees them as different outputs because of a missing abstraction layer. This implementation will silently set one crtc or the other, and maybe even won't warn. diffstat: src/rhd_randr.c | 43 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 38 insertions(+), 5 deletions(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… commit ec66e3b0e84bd57fcd93af2319025595b7dfd9bd Author: Matthias Hopf <mhopf(a)suse.de> Date: Wed Nov 14 17:10:52 2007 +0100 Improved RHDDebugRandrState. Also logs only and does not spit on stderr. diffstat: src/rhd_randr.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

xf86-video-radeonhd:master: 1 commit(s)
by libv＠kemper.freedesktop.org 14 Nov '07

14 Nov '07

Reporting from xf86-video-radeonhd: Radeon HD video driver Please visit: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd Or get your own copy by using: git-clone git://anongit.freedesktop.org/xorg/driver/xf86-video-radeonhd Commit against master at 6f1800ca...: commit 8ac590882a822a02fd15d7671d6796f6a1a54e13 Author: Luc Verhaegen <libv(a)skynet.be> Date: Wed Nov 14 17:11:23 2007 +0100 TMDSA: create a table for electrical adjustments. Create a pci device id based table with electrical values for all currently known devices with TMDSA. Warn verbosely about unknown devices. TMDSB now also includes support for the RV530 on the Dell low profile card. diffstat: src/rhd_lvtma.c | 5 +- src/rhd_tmds.c | 125 +++++++++++++++++++++++++--------------------------- 2 files changed, 65 insertions(+), 65 deletions(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

LVTMA TMDS support
by raiden＠server.boros.com 14 Nov '07

14 Nov '07

I have again reupdated the driver from GIT but still without any luck. I have also dumped the bios using rhd_conntest for you to add the 3 necessary bytes for the Radeon Sapphire X1600 512mb AGP card. (RV530 chipset) rhd_conntest output ./rhd_conntest 01:00.0 rhd_conntest: version 0.0.2, built from git branch master, commit 6f1800ca.. Checking connectors on 0x71C2, 0x174B, 0x0850 (@01:00:00): Load Detection: RHD_OUTPUT_TMDSA HotPlug: RHD_HPD_NONE DDC: RHD_DDC_1 DDC Line[1]: Slaves: a0 Xorg.log output (==) RADEONHD(0): Depth 16, (--) framebuffer bpp 16 (WW) RADEONHD(0): Unknown card detected: 0x71C2:0x174B:0x0850. If your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Include your X log, the full name of the device and the rhd_conntest (found in utils/conntest) output. (--) RADEONHD(0): Detected an RV530 on an unidentified card (II) RADEONHD(0): Mapped IO at 0xb7be5000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x174b SubsystemID: 0x0850 IOBaseAddress: 0x9000 Filename: 3C8501SA.005 BIOS Bootup Message: RV530 Rialto Test BIOS DDR2 500e/400m (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000 (--) RADEONHD(0): VideoRAM: 524288 kByte (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000 (II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb000 (WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x8000000 VRAM End: 0x20000000 (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead (II) RADEONHD(0): Default Engine Clock: 635000 (II) RADEONHD(0): Default Memory Clock: 505000 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) Loading sub module "i2c" (II) LoadModule: "i2c"(II) Module "i2c" already built-in (II) RADEONHD(0): Default Engine Clock: 635000 (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "SVIDEO TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DVI-I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } } (--) RADEONHD(0): Attaching Output DAC A to Connector VGA CRT1 (--) RADEONHD(0): Attaching Output DAC B to Connector SVIDEO TV1 (--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I DFP1 CRT2 (--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I DFP1 CRT2 (WW) RADEONHD(0): DACBSenseCRT: connector type 4 is not supported. (EE) RADEONHD(0): Failed to detect a connected monitor (II) RADEONHD(0): Destroying DAC A (II) RADEONHD(0): Destroying DAC B (II) RADEONHD(0): Destroying TMDS A (II) RADEONHD(0): I2C bus "RHD I2C line 0" removed. (II) RADEONHD(0): I2C bus "RHD I2C line 1" removed. (II) RADEONHD(0): I2C bus "RHD I2C line 2" removed. (II) UnloadModule: "radeonhd" (EE) Screen(s) found, but none have a usable configuration. and last.....the BIOS dump is located at http://24.78.141.204/radeonx1600probios.tar.gz Hope this helps. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1

xf86-video-radeonhd:initial-randr: 1 commit(s)
by mhopf＠kemper.freedesktop.org 14 Nov '07

14 Nov '07

Reporting from xf86-video-radeonhd: Radeon HD video driver Please visit: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd Or get your own copy by using: git-clone git://anongit.freedesktop.org/xorg/driver/xf86-video-radeonhd Commit against initial-randr at fe834af6...: commit 5c174fe4b1b087491975aa42d39e3201611910ac Author: Matthias Hopf <mhopf(a)suse.de> Date: Wed Nov 14 14:19:42 2007 +0100 Fix missing ModeLayoutSelect() in noRandR case. diffstat: src/rhd_driver.c | 7 +++++++ 1 file changed, 7 insertions(+) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

Re: Re[4]: [radeonhd] The X1950 GT Card has not been recognized
by Egbert Eich 14 Nov '07

14 Nov '07

Hi Vsevolod, Vsevolod Novikov writes: > Hi Egbert, > > The monitor connected to the card is "FLATRON 795FT Plus" (CRT connected through the VGA connector). > > I didn't expect that I should provide detail information about the monitor to the driver, but assumed that the driver will get the information itself, or will provide some default values. Other drivers work with minimal monitor section normally. Here this is different. When we don't see a monitor we don't bother to enable it. What surprises me is that load detection doesn't seem work. If this fails we don't bother any further. > > Moreover, I don't think that the driver should fail loading just because it can't read monitor information through the connector right now. The monitor might be connected later, or switched off now, we might connect additional monitor (f.e. presentation projector), and I think that the driver should process these events as correctly as it can. Ideally this should be handled by a dynamic hotplug detection. You don't want to set a mode for an unknown monitor as it should be validated first. > > I can't use DVI connector just because the monitor doesn't have it. VGA only. Does the driver support for the VGA connector at all? > Yes. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0