Hallo , Ich habe unter SUSE 7.1 die AVM treiber für meine USB Card installiert. Bei einem pppd aufruf von der console reagiert der controller. Aufstarten terminal # pppd call isdn/bluewindow linux:~ # pppd call isdn/bluewindow Plugin /etc/ppp/plugins/userpass.so loaded. Plugin /etc/ppp/plugins/capiplugin.so loaded. capiplugin: $Revision: 1.13 $ capiconn: 1.5 capiplugin: phase serialconn capiplugin: contr=1 controller 1: listen_change_state 0 -> 1 contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 controller 1: listen_change_state 1 -> 0 plci_change_state:0x0 0 -> 1 event=1 capiplugin: dial 0840840222 (hdlc) plci_change_state:0x101 1 -> 2 event=3 plci_change_state:0x101 2 -> 3 event=6 ncci_change_state:0x101 0 -> 1 event=1 ncci_change_state:0x10101 1 -> 3 event=3 ncci_change_state:0x10101 3 -> 4 event=7 ncci 0x10101 up capiplugin: connected: "" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101) capiplugin: using /dev/capi/0: "" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101) using channel 1 Using interface ppp0 Connect: ppp0 <--> /dev/capi/0 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x25a4704a> <pcomp> <accomp>] capiplugin: phase establish rcvd [LCP ConfReq id=0xb3 <auth chap MD5> <magic 0xf808635c> <mrru 1524> <endpoint [local:74.62.77.6d.6c.70.70.70]>] sent [LCP ConfRej id=0xb3 <mrru 1524>] rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x25a4704a> <pcomp> <accomp>] capiplugin: "" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101): charge in currency: -16 rcvd [LCP ConfReq id=0xb4 <auth chap MD5> <magic 0xf808635c> <endpoint [local:74.62.77.6d.6c.70.70.70]>] sent [LCP ConfNak id=0xb4 <auth pap>] rcvd [LCP ConfReq id=0xb5 <auth pap> <magic 0xf808635c> <endpoint [local:74.62.77.6d.6c.70.70.70]>] sent [LCP ConfAck id=0xb5 <auth pap> <magic 0xf808635c> <endpoint [local:74.62.77.6d.6c.70.70.70]>] sent [LCP EchoReq id=0x0 magic=0x25a4704a] capiplugin: phase authenticate sent [PAP AuthReq id=0x1 user="m.capaul" password=<hidden>] rcvd [LCP EchoRep id=0x0 magic=0xf808635c] rcvd [PAP AuthAck id=0x1 ""] capiplugin: phase network sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>] sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] rcvd [IPCP ConfReq id=0x4f <addr 213.3.208.1>] sent [IPCP ConfAck id=0x4f <addr 213.3.208.1>] rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>] sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>] rcvd [LCP ProtRej id=0x1c 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f] rcvd [IPCP ConfNak id=0x2 <addr 213.3.210.76>] sent [IPCP ConfReq id=0x3 <addr 213.3.210.76>] rcvd [IPCP ConfAck id=0x3 <addr 213.3.210.76>] local IP address 213.3.210.76 remote IP address 213.3.208.1 capiplugin: phase running Script /etc/ppp/ip-up started (pid 991) Script /etc/ppp/ip-up finished (pid 991), status = 0x0 Terminating on signal 2. capiplugin: phase terminate capiplugin: phase network Script /etc/ppp/ip-down started (pid 1008) capiplugin: phase terminate sent [LCP TermReq id=0x2 "User request"] rcvd [LCP TermAck id=0x2] capiplugin: phase dead ncci_change_state:0x10101 4 -> 6 event=12 ncci_change_state:0x10101 6 -> 7 event=10 ncci_change_state:0x10101 7 -> 0 event=13 plci_change_state:0x101 3 -> 7 event=8 capiplugin: "" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101): charge in currency: -16 DISCONNECT_IND reason 0x3400 (No additional information) for plci 0x101 plci_change_state:0x101 7 -> 8 event=9 plci_change_state:0x101 8 -> 0 event=11 capiplugin: disconnect(local): "" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101) 0x3400 (0x0000) - No additional information Connection terminated. Connect time 0.1 minutes. Sent 61 bytes, received 40 bytes. tcflush failed: Input/output error capiplugin: phase disconnect Waiting for 1 child processes... script /etc/ppp/ip-down, pid 1008 Script /etc/ppp/ip-down finished (pid 1008), status = 0x0 linux:~ # Starte ich jedoch den kppp erhalte ich die Meldung -> Sorry, can't open modem. Versuche ich mit wvdial von der console aus erhalte ich folgende Meldung linux:~ # wvdial --> WvDial: Internet dialer version 1.41 --> Cannot open /dev/modem: Is a directory linux:~ # Hat jemand eine Idee wie ich meinem Modem konfigurieren muss ?? Gruss sand