Hallo ,
Ich habe unter SUSE 7.1 die AVM treiber für meine USB Card installiert.
Bei einem pppd aufruf von der console reagiert der controller.
Aufstarten terminal # pppd call isdn/bluewindow
linux:~ # pppd call isdn/bluewindow
Plugin /etc/ppp/plugins/userpass.so loaded.
Plugin /etc/ppp/plugins/capiplugin.so loaded.
capiplugin: $Revision: 1.13 $
capiconn: 1.5
capiplugin: phase serialconn
capiplugin: contr=1
controller 1: listen_change_state 0 -> 1
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dial 0840840222 (hdlc)
plci_change_state:0x101 1 -> 2 event=3
plci_change_state:0x101 2 -> 3 event=6
ncci_change_state:0x101 0 -> 1 event=1
ncci_change_state:0x10101 1 -> 3 event=3
ncci_change_state:0x10101 3 -> 4 event=7
ncci 0x10101 up
capiplugin: connected: "" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101)
capiplugin: using /dev/capi/0: "" -> "0840840222" outgoing
(pcli=0x101/ncci=0x10101)
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/capi/0
sent [LCP ConfReq id=0x1 <pcomp> <accomp>]
capiplugin: phase establish
rcvd [LCP ConfReq id=0xb3 <auth chap MD5>
]
sent [LCP ConfRej id=0xb3 ]
rcvd [LCP ConfAck id=0x1 <pcomp> <accomp>]
capiplugin: "" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101): charge in
currency: -16
rcvd [LCP ConfReq id=0xb4 <auth chap MD5> ]
sent [LCP ConfNak id=0xb4 <auth pap>]
rcvd [LCP ConfReq id=0xb5 <auth pap> ]
sent [LCP ConfAck id=0xb5 <auth pap> ]
sent [LCP EchoReq id=0x0 magic=0x25a4704a]
capiplugin: phase authenticate
sent [PAP AuthReq id=0x1 user="m.capaul" password=<hidden>]
rcvd [LCP EchoRep id=0x0 magic=0xf808635c]
rcvd [PAP AuthAck id=0x1 ""]
capiplugin: phase network
sent [IPCP ConfReq id=0x1 ]
sent [CCP ConfReq id=0x1 ]
rcvd [IPCP ConfReq id=0x4f ]
sent [IPCP ConfAck id=0x4f ]
rcvd [IPCP ConfRej id=0x1 ]
sent [IPCP ConfReq id=0x2 ]
rcvd [LCP ProtRej id=0x1c 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
rcvd [IPCP ConfNak id=0x2 ]
sent [IPCP ConfReq id=0x3 ]
rcvd [IPCP ConfAck id=0x3 ]
local IP address 213.3.210.76
remote IP address 213.3.208.1
capiplugin: phase running
Script /etc/ppp/ip-up started (pid 991)
Script /etc/ppp/ip-up finished (pid 991), status = 0x0
Terminating on signal 2.
capiplugin: phase terminate
capiplugin: phase network
Script /etc/ppp/ip-down started (pid 1008)
capiplugin: phase terminate
sent [LCP TermReq id=0x2 "User request"]
rcvd [LCP TermAck id=0x2]
capiplugin: phase dead
ncci_change_state:0x10101 4 -> 6 event=12
ncci_change_state:0x10101 6 -> 7 event=10
ncci_change_state:0x10101 7 -> 0 event=13
plci_change_state:0x101 3 -> 7 event=8
capiplugin: "" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101): charge in
currency: -16
DISCONNECT_IND reason 0x3400 (No additional information) for plci 0x101
plci_change_state:0x101 7 -> 8 event=9
plci_change_state:0x101 8 -> 0 event=11
capiplugin: disconnect(local): "" -> "0840840222" outgoing
(pcli=0x101/ncci=0x10101) 0x3400 (0x0000) - No additional information
Connection terminated.
Connect time 0.1 minutes.
Sent 61 bytes, received 40 bytes.
tcflush failed: Input/output error
capiplugin: phase disconnect
Waiting for 1 child processes...
script /etc/ppp/ip-down, pid 1008
Script /etc/ppp/ip-down finished (pid 1008), status = 0x0
linux:~ #
Starte ich jedoch den kppp erhalte ich die Meldung -> Sorry, can't open modem.
Versuche ich mit wvdial von der console aus erhalte ich folgende Meldung
linux:~ # wvdial
--> WvDial: Internet dialer version 1.41
--> Cannot open /dev/modem: Is a directory
linux:~ #
Hat jemand eine Idee wie ich meinem Modem konfigurieren muss ??
Gruss
sand
