Hallo ,
Ich habe unter SUSE 7.1 die AVM
treiber für meine USB Card installiert.
Bei einem pppd aufruf von der console reagiert der
controller.
Aufstarten terminal # pppd call isdn/bluewindow
linux:~ # pppd call
isdn/bluewindow
Plugin /etc/ppp/plugins/userpass.so loaded.
Plugin
/etc/ppp/plugins/capiplugin.so loaded.
capiplugin: $Revision: 1.13
$
capiconn: 1.5
capiplugin: phase serialconn
capiplugin:
contr=1
controller 1: listen_change_state 0 -> 1
contr 1: listenconf
Info=0x0000 (No additional information) infomask=0x144
cipmask=0x0
capimask2=0x0
controller 1: listen_change_state 1 ->
0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dial 0840840222
(hdlc)
plci_change_state:0x101 1 -> 2 event=3
plci_change_state:0x101 2
-> 3 event=6
ncci_change_state:0x101 0 -> 1
event=1
ncci_change_state:0x10101 1 -> 3
event=3
ncci_change_state:0x10101 3 -> 4 event=7
ncci 0x10101
up
capiplugin: connected: "" -> "0840840222" outgoing
(pcli=0x101/ncci=0x10101)
capiplugin: using /dev/capi/0: "" ->
"0840840222" outgoing
(pcli=0x101/ncci=0x10101)
using channel
1
Using interface ppp0
Connect: ppp0 <--> /dev/capi/0
sent [LCP
ConfReq id=0x1 <asyncmap 0x0> <magic 0x25a4704a> <pcomp>
<accomp>]
capiplugin: phase establish
rcvd [LCP ConfReq id=0xb3
<auth chap MD5> <magic 0xf808635c> <mrru 1524>
<endpoint [local:74.62.77.6d.6c.70.70.70]>]
sent [LCP ConfRej
id=0xb3 <mrru 1524>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0>
<magic 0x25a4704a> <pcomp> <accomp>]
capiplugin:
"" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101):
charge in
currency: -16
rcvd [LCP ConfReq id=0xb4 <auth chap MD5>
<magic 0xf808635c> <endpoint
[local:74.62.77.6d.6c.70.70.70]>]
sent [LCP ConfNak id=0xb4 <auth
pap>]
rcvd [LCP ConfReq id=0xb5 <auth pap> <magic 0xf808635c>
<endpoint
[local:74.62.77.6d.6c.70.70.70]>]
sent [LCP ConfAck
id=0xb5 <auth pap> <magic 0xf808635c> <endpoint
[local:74.62.77.6d.6c.70.70.70]>]
sent [LCP EchoReq id=0x0
magic=0x25a4704a]
capiplugin: phase authenticate
sent [PAP AuthReq id=0x1
user="m.capaul" password=<hidden>]
rcvd [LCP EchoRep id=0x0
magic=0xf808635c]
rcvd [PAP AuthAck id=0x1 ""]
capiplugin: phase
network
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f
01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>
<bsd v1 15>]
rcvd [IPCP ConfReq id=0x4f <addr
213.3.208.1>]
sent [IPCP ConfAck id=0x4f <addr 213.3.208.1>]
rcvd
[IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2
<addr 0.0.0.0>]
rcvd [LCP ProtRej id=0x1c 80 fd 01 01 00 0f 1a 04 78 00
18 04 78 00 15 03 2f]
rcvd [IPCP ConfNak id=0x2 <addr
213.3.210.76>]
sent [IPCP ConfReq id=0x3 <addr
213.3.210.76>]
rcvd [IPCP ConfAck id=0x3 <addr
213.3.210.76>]
local IP address 213.3.210.76
remote IP address
213.3.208.1
capiplugin: phase running
Script /etc/ppp/ip-up started (pid
991)
Script /etc/ppp/ip-up finished (pid 991), status = 0x0
Terminating on
signal 2.
capiplugin: phase terminate
capiplugin: phase network
Script
/etc/ppp/ip-down started (pid 1008)
capiplugin: phase terminate
sent [LCP
TermReq id=0x2 "User request"]
rcvd [LCP TermAck
id=0x2]
capiplugin: phase dead
ncci_change_state:0x10101 4 -> 6
event=12
ncci_change_state:0x10101 6 -> 7
event=10
ncci_change_state:0x10101 7 -> 0
event=13
plci_change_state:0x101 3 -> 7 event=8
capiplugin:
"" -> "0840840222" outgoing (pcli=0x101/ncci=0x10101):
charge in
currency: -16
DISCONNECT_IND reason 0x3400 (No additional
information) for plci 0x101
plci_change_state:0x101 7 -> 8
event=9
plci_change_state:0x101 8 -> 0 event=11
capiplugin:
disconnect(local): "" -> "0840840222" outgoing
(pcli=0x101/ncci=0x10101) 0x3400 (0x0000) - No additional
information
Connection terminated.
Connect time 0.1 minutes.
Sent 61
bytes, received 40 bytes.
tcflush failed: Input/output error
capiplugin:
phase disconnect
Waiting for 1 child processes...
script
/etc/ppp/ip-down, pid 1008
Script /etc/ppp/ip-down finished (pid 1008),
status = 0x0
linux:~
#
Starte ich jedoch den kppp erhalte ich die Meldung
-> Sorry, can't open modem.
Versuche ich mit wvdial von der console aus erhalte
ich folgende Meldung
linux:~ # wvdial
--> WvDial: Internet dialer
version 1.41
--> Cannot open /dev/modem: Is a directory
linux:~
#
Hat jemand eine Idee wie ich meinem Modem
konfigurieren muss ??
Gruss
sand