Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here.
Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&...
Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports
Packages changed: ImageMagick (7.1.0.0 -> 7.1.0.4) Mesa (21.1.5 -> 21.1.6) Mesa-drivers (21.1.5 -> 21.1.6) aaa_base (84.87+git20210616.9cf42ff -> 84.87+git20210727.b447649) alsa-utils apache-commons-logging apache2-mod_php7 (7.4.21 -> 7.4.22) bash (5.1.4 -> 5.1.8) bind (9.16.18 -> 9.16.19) catfish (4.16.0 -> 4.16.2) dav1d (0.9.0 -> 0.9.1) gjs gnome-session gtk4 iproute2 (5.12 -> 5.13) ipset (7.11 -> 7.14) javapackages-tools kernel-source (5.13.4 -> 5.13.6) libreoffice libzypp (17.27.0 -> 17.28.0) lua54 metamail mousepad (0.5.5 -> 0.5.6) mtools (4.0.31 -> 4.0.34) mutter patterns-gnome perl-DBD-SQLite php7 (7.4.21 -> 7.4.22) protobuf selinux-policy (20210419 -> 20210716) sudo suitesparse systemd (248.3 -> 248.6) tftp virtualbox (6.1.24 -> 6.1.26) virtualbox-kmp (6.1.24_k5.13.4_1 -> 6.1.26_k5.13.6_1) webkit2gtk3 xorg-x11-server (1.20.12 -> 1.20.13) yast2-country (4.4.1 -> 4.4.2) yast2-network (4.4.21 -> 4.4.22) yast2-theme (4.4.1 -> 4.4.2) zypper (1.14.46 -> 1.14.48)
=== Details ===
==== ImageMagick ==== Version update (7.1.0.0 -> 7.1.0.4) Subpackages: ImageMagick-config-7-SUSE ImageMagick-extra libMagickCore-7_Q16HDRI10 libMagickWand-7_Q16HDRI10
- update to 7.1.0.4: * trim no longer returns an empty image on 1-pixel width input (reference https://github.com/ImageMagick/ImageMagick/issues/3896). * remove virtual canvas offset from difference image. * Added option to set the pixel format option of ffmpeg when reading a video file with -define video:pixel-format=<value>. * system() is not supported under IOS. * accelerate subimage-search with FFT's (contributed by Fred). * malloc() corruption fix * Added option to set the vsync option of ffmpeg when reading or writing a video file with -define video:vsync=<value>.
==== Mesa ==== Version update (21.1.5 -> 21.1.6) Subpackages: Mesa-dri-devel Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1
- update to 21.1.6 * sixth bugfix release
==== Mesa-drivers ==== Version update (21.1.5 -> 21.1.6) Subpackages: Mesa-dri Mesa-gallium Mesa-libva libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libvulkan_radeon libxatracker2
- update to 21.1.6 * sixth bugfix release
==== aaa_base ==== Version update (84.87+git20210616.9cf42ff -> 84.87+git20210727.b447649) Subpackages: aaa_base-extras
- Update to version 84.87+git20210727.b447649: * Move /etc/profile.d/* to /usr/etc/profile.d/
==== alsa-utils ====
- Added hardening to systemd service(s). Modified: * sound-extra.service
==== apache-commons-logging ====
- Disable tests everywhere, not only for arm6
==== apache2-mod_php7 ==== Version update (7.4.21 -> 7.4.22)
- updated to 7.4.22: This is a security and bug fix release. See https://www.php.net/ChangeLog-7.php#7.4.22
==== bash ==== Version update (5.1.4 -> 5.1.8) Subpackages: bash-doc bash-lang
- Use a get_version_number.sh script - Get patch lvl by running command to find it instead of hardcoding - Remove old SUSE RPM constructs - Clean spec file
==== bind ==== Version update (9.16.18 -> 9.16.19) Subpackages: bind-doc bind-utils python3-bind
- Update to 9.16.19 * A race condition could occur where two threads were competing for the same set of key file locks, leading to a deadlock. This has been fixed. [GL #2786] * create_keydata() created an invalid placeholder keydata record upon a refresh failure, which prevented the database of managed keys from subsequently being read back. This has been fixed. [GL #2686] * KASP support was extended with the "check DS" feature. Zones with "dnssec-policy" and "parental-agents" configured now check for DS presence and can perform automatic KSK rollovers. [GL #1126] * Rescheduling a setnsec3param() task when a zone failed to load on startup caused a hang on shutdown. This has been fixed. [GL #2791] * The configuration-checking code failed to account for the inheritance rules of the "dnssec-policy" option. This has been fixed. [GL #2780] * If nsupdate sends an SOA request and receives a REFUSED response, it now fails over to the next available server. [GL #2758] * For UDP messages larger than the path MTU, named now sends an empty response with the TC (TrunCated) bit set. In addition, setting the DF (Don't Fragment) flag on outgoing UDP sockets was re-enabled. [GL #2790] * Views with recursion disabled are now configured with a default cache size of 2 MB unless "max-cache-size" is explicitly set. This prevents cache RBT hash tables from being needlessly preallocated for such views. [GL #2777] * Change 5644 inadvertently introduced a deadlock: when locking the key file mutex for each zone structure in a different view, the "in-view" logic was not considered. This has been fixed. [GL #2783] * Increasing "max-cache-size" for a running named instance (using "rndc reconfig") did not cause the hash tables used by cache databases to be grown accordingly. This has been fixed. [GL #2770] * Signed, insecure delegation responses prepared by named either lacked the necessary NSEC records or contained duplicate NSEC records when both wildcard expansion and CNAME chaining were required to prepare the response. This has been fixed. [GL #2759] * A bug that caused the NSEC3 salt to be changed on every restart for zones using KASP has been fixed. [GL #2725]
==== catfish ==== Version update (4.16.0 -> 4.16.2) Subpackages: catfish-lang
- Update to version 4.16.2 * Use standard icon name application-x-executable-symbolic instead of applications-other-symbolic * Fix install with rpm/pkgbuild/pip (gxo#apps/catfish#58, gxo#apps/catfish#59) * Added keyboard hotkeys for search entry, new open dialog * Fix Thunar "Show in FM" bug, better FM support (gxo#apps/catfish#43) * Stops freezes with special files when zip search enabled * Better and safer refreshing of selected results (gxo#apps/catfish#48) * Enable sidebar by default (gxo#apps/catfish#45) * Enable installation using pip (local source) (gxo#apps/catfish!20) * Add support for searching compressed files (gxo#apps/catfish#29) * Add persistent settings for searching file contents (gxo#apps/catfish#10) * Add persistent settings for thumbnail view (gxo#apps/catfish#14) * Add message and troff mimetypes to fulltext search (gxo#apps/catfish!22) * Add PDF support to fulltext search (gxo#apps/catfish#37) * Fix loading in Wayland (gxo#apps/catfish#50) * Stop current search when new one starts (gxo#apps/catfish!28) * Use local MIME database info (gxo#apps/catfish!21) * Translation Updates
==== dav1d ==== Version update (0.9.0 -> 0.9.1)
- Update to version 0.9.1 * 10/12b SSSE3 optimizations for mc (avg, w_avg, mask, w_mask, emu_edge), prep/put_bilin, prep/put_8tap, ipred (dc/h/v, paeth, smooth, pal, filter), wiener, sgr (10b), warp8x8, deblock, film_grain, cfl_ac/pred for 32bit and 64bit x86 processors * Film grain NEON for fguv 10/12b, fgy/fguv 8b and fgy/fguv 10/12 arm32 * Fixes for filmgrain on ARM * itx 10bit optimizations for 4x4/x8/x16, 8x4/x8/x16 for SSE4 * Misc improvements on SSE2, SSE4
==== gjs ==== Subpackages: libgjs0 typelib-1_0-GjsPrivate-1_0
- Adapt xorg-x11-Xvfb BuildRequires on SLE and Leap, whose X has not updated to xorg-x11-server-Xvfb.
==== gnome-session ==== Subpackages: gnome-session-core gnome-session-default-session gnome-session-lang gnome-session-wayland
- Add gnome-session-exit-when-lost-name-on-bus.patch: gnome-session exit immediately when lost name on bus (bsc#1175622 glgo!GNOME/gnome-session!60, bsc#1188882).
==== gtk4 ==== Subpackages: gtk4-lang gtk4-schema libgtk-4-1 typelib-1_0-Gtk-4_0
- Add back Mesa-libGLESv2-devel BuildRequires for SLE and Leap. The necessary header GLES2/gl2ext.h is still in the v2 package on SLE/Leap.
==== iproute2 ==== Version update (5.12 -> 5.13)
- Update to release 5.13 * mptcp: add support for port-based endpoints * nexthop: Add ability to specify group type, add support for resilient nexthop groups and nexthop buckets * ip: xfrm: add support for tfcpad * ip-nexthop: support flush by id * mptcp: add support for event monitoring * bridge: monitor: add support for vlan monitoring
==== ipset ==== Version update (7.11 -> 7.14) Subpackages: libipset13
- Update to release 7.14 * Allow specifying protocols by number * Limit the maximum range of consecutive elements to add/delete
==== javapackages-tools ==== Subpackages: javapackages-filesystem
- Do not run tests on SLE12, since python3-test is not accessible
==== kernel-source ==== Version update (5.13.4 -> 5.13.6) Subpackages: kernel-default kernel-docs
- Update config files. Just refresh. - commit 2d7b44d - Linux 5.13.6 (bsc#1012628). - igc: Fix use-after-free error during reset (bsc#1012628). - igb: Fix use-after-free error during reset (bsc#1012628). - igc: change default return of igc_read_phy_reg() (bsc#1012628). - ixgbe: Fix an error handling path in 'ixgbe_probe()' (bsc#1012628). - igc: Fix an error handling path in 'igc_probe()' (bsc#1012628). - igb: Fix an error handling path in 'igb_probe()' (bsc#1012628). - fm10k: Fix an error handling path in 'fm10k_probe()' (bsc#1012628). - e1000e: Fix an error handling path in 'e1000_probe()' (bsc#1012628). - iavf: Fix an error handling path in 'iavf_probe()' (bsc#1012628). - igb: Check if num of q_vectors is smaller than max before array access (bsc#1012628). - igb: Fix position of assignment to *ring (bsc#1012628). - net: stmmac: Terminate FPE workqueue in suspend (bsc#1012628). - gve: Fix an error handling path in 'gve_probe()' (bsc#1012628). - bpf, samples: Fix xdpsock with '-M' parameter missing unload process (bsc#1012628). - bonding: fix suspicious RCU usage in bond_ipsec_add_sa() (bsc#1012628). - bonding: fix null dereference in bond_ipsec_add_sa() (bsc#1012628). - ixgbevf: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops (bsc#1012628). - bonding: fix suspicious RCU usage in bond_ipsec_del_sa() (bsc#1012628). - bonding: disallow setting nested bonding + ipsec offload (bsc#1012628). - bonding: Add struct bond_ipesc to manage SA (bsc#1012628). - bonding: fix suspicious RCU usage in bond_ipsec_offload_ok() (bsc#1012628). - bonding: fix incorrect return value of bond_ipsec_offload_ok() (bsc#1012628). - ipv6: fix 'disable_policy' for fwd packets (bsc#1012628). - stmmac: platform: Fix signedness bug in stmmac_probe_config_dt() (bsc#1012628). - selftests: icmp_redirect: remove from checking for IPv6 route get (bsc#1012628). - selftests: icmp_redirect: IPv6 PMTU info should be cleared after redirect (bsc#1012628). - pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped (bsc#1012628). - cxgb4: fix IRQ free race during driver unload (bsc#1012628). - drm/vmwgfx: Fix a bad merge in otable batch takedown (bsc#1012628). - mptcp: fix warning in __skb_flow_dissect() when do syn cookie for subflow join (bsc#1012628). - mptcp: remove redundant req destruct in subflow_check_req() (bsc#1012628). - mptcp: fix syncookie process if mptcp can not_accept new subflow (bsc#1012628). - mptcp: add sk parameter for mptcp_get_options (bsc#1012628). - mptcp: avoid processing packet if a subflow reset (bsc#1012628). - selftests: mptcp: fix case multiple subflows limited by server (bsc#1012628). - mptcp: use fast lock for subflows when possible (bsc#1012628). - mptcp: refine mptcp_cleanup_rbuf (bsc#1012628). - mptcp: properly account bulk freed memory (bsc#1012628). - net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340 (bsc#1012628). - nvme-pci: do not call nvme_dev_remove_admin from nvme_remove (bsc#1012628). - net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload (bsc#1012628). - sfc: fix lack of XDP TX queues - error XDP TX failed (-22) (bsc#1012628). - KVM: x86/pmu: Clear anythread deprecated bit when 0xa leaf is unsupported on the SVM (bsc#1012628). - KVM: SVM: Return -EFAULT if copy_to_user() for SEV mig packet header fails (bsc#1012628). - KVM: SVM: Fix sev_pin_memory() error checks in SEV migration utilities (bsc#1012628). - arm64: mte: fix restoration of GCR_EL1 from suspend (bsc#1012628). - ARM: dts: aspeed: Update e3c246d4i vuart properties (bsc#1012628). - firmware: arm_scmi: Ensure drivers provide a probe function (bsc#1012628). - perf inject: Fix dso->nsinfo refcounting (bsc#1012628). - perf map: Fix dso->nsinfo refcounting (bsc#1012628). - perf probe: Fix dso->nsinfo refcounting (bsc#1012628). - perf env: Fix sibling_dies memory leak (bsc#1012628). - perf test session_topology: Delete session->evlist (bsc#1012628). - perf test event_update: Fix memory leak of evlist (bsc#1012628). - perf test event_update: Fix memory leak of unit (bsc#1012628). - perf dso: Fix memory leak in dso__new_map() (bsc#1012628). - perf test maps__merge_in: Fix memory leak of maps (bsc#1012628). - perf env: Fix memory leak of cpu_pmu_caps (bsc#1012628). - perf report: Free generated help strings for sort option (bsc#1012628). - perf script: Release zstd data (bsc#1012628). - perf script: Fix memory 'threads' and 'cpus' leaks on exit (bsc#1012628). - perf lzma: Close lzma stream on exit (bsc#1012628). - perf probe-file: Delete namelist in del_events() on the error path (bsc#1012628). - perf data: Close all files in close_dir() (bsc#1012628). - perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set (bsc#1012628). - Kbuild: lto: fix module versionings mismatch in GNU make 3.X (bsc#1012628). - ASoC: wm_adsp: Correct wm_coeff_tlv_get handling (bsc#1012628). - spi: stm32: fixes pm_runtime calls in probe/remove (bsc#1012628). - regulator: hi6421: Use correct variable type for regmap api val argument (bsc#1012628). - regulator: hi6421: Fix getting wrong drvdata (bsc#1012628). - spi: mediatek: fix fifo rx mode (bsc#1012628). - ASoC: rt5631: Fix regcache sync errors on resume (bsc#1012628). - bpf, test: fix NULL pointer dereference on invalid expected_attach_type (bsc#1012628). - bpf: Fix tail_call_reachable rejection for interpreter when jit failed (bsc#1012628). - xdp, net: Fix use-after-free in bpf_xdp_link_release (bsc#1012628). - ASoC: SOF: Intel: Update ADL descriptor to use ACPI power states (bsc#1012628). - timers: Fix get_next_timer_interrupt() with no timers pending (bsc#1012628). - drm/vc4: hdmi: Drop devm interrupt handler for CEC interrupts (bsc#1012628). - net: dsa: mv88e6xxx: NET_DSA_MV88E6XXX_PTP should depend on NET_DSA_MV88E6XXX (bsc#1012628). - liquidio: Fix unintentional sign extension issue on left shift of u16 (bsc#1012628). - s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1] (bsc#1012628). - bpf, sockmap: Fix potential memory leak on unlikely error case (bsc#1012628). - bpf, sockmap, tcp: sk_prot needs inuse_idx set for proc stats (bsc#1012628). - bpf, sockmap, udp: sk_prot needs inuse_idx set for proc stats (bsc#1012628). - bpftool: Check malloc return value in mount_bpffs_for_pin (bsc#1012628). - net: fix uninit-value in caif_seqpkt_sendmsg (bsc#1012628). - spi: spi-cadence-quadspi: Fix division by zero warning (bsc#1012628). - usb: hso: fix error handling code of hso_create_net_device (bsc#1012628). - dma-mapping: handle vmalloc addresses in dma_common_{mmap,get_sgtable} (bsc#1012628). - ASoC: soc-pcm: add a flag to reverse the stop sequence (bsc#1012628). - efi/tpm: Differentiate missing and invalid final event log table (bsc#1012628). - net: decnet: Fix sleeping inside in af_decnet (bsc#1012628). - KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash (bsc#1012628). - KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak (bsc#1012628). - net: sched: fix memory leak in tcindex_partial_destroy_work (bsc#1012628). - sctp: trim optlen when it's a huge value in sctp_setsockopt (bsc#1012628). - netrom: Decrease sock refcount when sock timers expire (bsc#1012628). - scsi: iscsi: Fix iface sysfs attr detection (bsc#1012628). - scsi: target: Fix protect handling in WRITE SAME(32) (bsc#1012628). - spi: cadence: Correct initialisation of runtime PM again (bsc#1012628). - ACPI: Kconfig: Fix table override from built-in initrd (bsc#1012628). - efi/dev-path-parser: Switch to use for_each_acpi_dev_match() (bsc#1012628). - ACPI: utils: Fix reference counting in for_each_acpi_dev_match() (bsc#1012628). - bnxt_en: don't disable an already disabled PCI device (bsc#1012628). - bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe() (bsc#1012628). - bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task() (bsc#1012628). - bnxt_en: fix error path of FW reset (bsc#1012628). - bnxt_en: Validate vlan protocol ID on RX packets (bsc#1012628). - bnxt_en: Check abort error state in bnxt_half_open_nic() (bsc#1012628). - net: hisilicon: rename CACHE_LINE_MASK to avoid redefinition (bsc#1012628). - net/tcp_fastopen: fix data races around tfo_active_disable_stamp (bsc#1012628). - ALSA: hda: intel-dsp-cfg: add missing ElkhartLake PCI ID (bsc#1012628). - net: hns3: fix possible mismatches resp of mailbox (bsc#1012628). - net: hns3: fix rx VLAN offload state inconsistent issue (bsc#1012628). - spi: spi-bcm2835: Fix deadlock (bsc#1012628). - io_uring: fix memleak in io_init_wq_offload() (bsc#1012628). - net/sched: act_skbmod: Skip non-Ethernet packets (bsc#1012628). - ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions (bsc#1012628). - ceph: don't WARN if we're still opening a session to an MDS (bsc#1012628). - i2c: mpc: Poll for MCF (bsc#1012628). - scsi: target: Fix NULL dereference on XCOPY completion (bsc#1012628). - drm/ttm: Force re-init if ttm_global_init() fails (bsc#1012628). - nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING (bsc#1012628). - Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem" (bsc#1012628). - afs: Fix tracepoint string placement with built-in AFS (bsc#1012628). - afs: check function return (bsc#1012628). - afs: Fix setting of writeback_index (bsc#1012628). - r8169: Avoid duplicate sysfs entry creation error (bsc#1012628). - nvme: set the PRACT bit when using Write Zeroes with T10 PI (bsc#1012628). - sctp: update active_key for asoc when old key is being replaced (bsc#1012628). - udp: check encap socket in __udp_lib_err (bsc#1012628). - ibmvnic: Remove the proper scrq flush (bsc#1012628). - riscv: Fix 32-bit RISC-V boot failure (bsc#1012628). - tcp: disable TFO blackhole logic by default (bsc#1012628). - net: dsa: sja1105: make VID 4095 a bridge VLAN too (bsc#1012628). - RISC-V: load initrd wherever it fits into memory (bsc#1012628). - net: sched: cls_api: Fix the the wrong parameter (bsc#1012628). - drm/panel: raspberrypi-touchscreen: Prevent double-free (bsc#1012628). - dpaa2-switch: seed the buffer pool after allocating the swp (bsc#1012628). - cifs: only write 64kb at a time when fallocating a small region of a file (bsc#1012628). - cifs: fix fallocate when trying to allocate a hole (bsc#1012628). - ACPI: fix NULL pointer dereference (bsc#1012628). - io_uring: Fix race condition when sqp thread goes to sleep (bsc#1012628). - mmc: core: Don't allocate IDA for OF aliases (bsc#1012628). - s390/ftrace: fix ftrace_update_ftrace_func implementation (bsc#1012628). - s390/boot: fix use of expolines in the DMA code (bsc#1012628). - ALSA: usb-audio: Add missing proc text entry for BESPOKEN type (bsc#1012628). - ALSA: usb-audio: Add registration quirk for JBL Quantum headsets (bsc#1012628). - ALSA: sb: Fix potential ABBA deadlock in CSP driver (bsc#1012628). - ALSA: hda/realtek: Fix pop noise and 2 Front Mic issues on a machine (bsc#1012628). - ALSA: hdmi: Expose all pins on MSI MS-7C94 board (bsc#1012628). - ALSA: pcm: Call substream ack() method upon compat mmap commit (bsc#1012628). - ALSA: pcm: Fix mmap capability check (bsc#1012628). - usb: xhci: avoid renesas_usb_fw.mem when it's unusable (bsc#1012628). - xhci: Fix lost USB 2 remote wake (bsc#1012628). - usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI (bsc#1012628). - KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state (bsc#1012628). - usb: hub: Disable USB 3 device initiated lpm if exit latency is too high (bsc#1012628). - usb: hub: Fix link power management max exit latency (MEL) calculations (bsc#1012628). - USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS (bsc#1012628). - usb: max-3421: Prevent corruption of freed memory (bsc#1012628). - usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop() (bsc#1012628). - USB: serial: option: add support for u-blox LARA-R6 family (bsc#1012628). - USB: serial: cp210x: fix comments for GE CS1000 (bsc#1012628). - USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick (bsc#1012628). - usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe (bsc#1012628). - usb: dwc2: Skip clock gating on Samsung SoCs (bsc#1012628). - usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode (bsc#1012628). - usb: dwc2: gadget: Fix sending zero length packet in DDMA mode (bsc#1012628). - usb: typec: tipd: Don't block probing of consumer of "connector" nodes (bsc#1012628). - usb: typec: stusb160x: register role switch before interrupt registration (bsc#1012628). - usb: typec: stusb160x: Don't block probing of consumer of "connector" nodes (bsc#1012628). - firmware/efi: Tell memblock about EFI iomem reservations (bsc#1012628). - tracepoints: Update static_call before tp_funcs when adding a tracepoint (bsc#1012628). - tracing/histogram: Rename "cpu" to "common_cpu" (bsc#1012628). - tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop (bsc#1012628). - tracing: Synthetic event field_pos is an index not a boolean (bsc#1012628). - btrfs: check for missing device in btrfs_trim_fs (bsc#1012628). - btrfs: fix unpersisted i_size on fsync after expanding truncate (bsc#1012628). - btrfs: fix lock inversion problem when doing qgroup extent tracing (bsc#1012628). - media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() (bsc#1012628). - ixgbe: Fix packet corruption due to missing DMA sync (bsc#1012628). - driver core: auxiliary bus: Fix memory leak when driver_register() fail (bsc#1012628). - bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean (bsc#1012628). - bus: mhi: core: Validate channel ID when processing command completions (bsc#1012628). - bus: mhi: pci_generic: Fix inbound IPCR channel (bsc#1012628). - posix-cpu-timers: Fix rearm racing against process tick (bsc#1012628). - selftest: use mmap instead of posix_memalign to allocate memory (bsc#1012628). - io_uring: explicitly count entries for poll reqs (bsc#1012628). - io_uring: remove double poll entry on arm failure (bsc#1012628). - io_uring: fix early fdput() of file (bsc#1012628). - userfaultfd: do not untag user pointers (bsc#1012628). - kfence: move the size check to the beginning of __kfence_alloc() (bsc#1012628). - kfence: skip all GFP_ZONEMASK allocations (bsc#1012628). - mm: call flush_dcache_page() in memcpy_to_page() and memzero_page() (bsc#1012628). - mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction (bsc#1012628). - memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions (bsc#1012628). - mm: fix the deadlock in finish_fault() (bsc#1012628). - hugetlbfs: fix mount mode command line processing (bsc#1012628). - rbd: don't hold lock_rwsem while running_list is being drained (bsc#1012628). - rbd: always kick acquire on "acquired" and "released" notifications (bsc#1012628). - misc: eeprom: at24: Always append device id even if label property is set (bsc#1012628). - nds32: fix up stack guard gap (bsc#1012628). - driver core: Prevent warning when removing a device link from unregistered consumer (bsc#1012628). - drm: Return -ENOTTY for non-drm ioctls (bsc#1012628). - drm/amdgpu: update gc golden setting for dimgrey_cavefish (bsc#1012628). - drm/amdgpu: update the golden setting for vangogh (bsc#1012628). - drm/amdgpu: update golden setting for sienna_cichlid (bsc#1012628). - spi: spi-cadence-quadspi: Revert "Fix division by zero warning" (bsc#1012628). - bonding: fix build issue (bsc#1012628). - mptcp: fix 'masking a bool' warning (bsc#1012628). - skbuff: Release nfct refcount on napi stolen or re-used skbs (bsc#1012628). - ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in (bsc#1012628). - Documentation: Fix intiramfs script name (bsc#1012628). - arm64: entry: fix KCOV suppression (bsc#1012628). - perf inject: Close inject.output on exit (bsc#1012628). - drm/i915/gvt: Clear d3_entered on elsp cmd submission (bsc#1012628). - spi: spi-cadence-quadspi: Fix division by zero warning - try2 (bsc#1012628). - sfc: ensure correct number of XDP queues (bsc#1012628). - skbuff: Fix build with SKB extensions disabled (bsc#1012628). - commit b45358d - KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow (bsc#1188838 CVE-2021-37576). - commit b53c0bd - Linux 5.13.5 (bsc#1012628). - mt76: mt7921: continue to probe driver when fw already downloaded (bsc#1012628). - udp: properly flush normal packet at GRO time (bsc#1012628). - udp: annotate data races around unix_sk(sk)->gso_size (bsc#1012628). - firmware: arm_scmi: Avoid padding in sensor message structure (bsc#1012628). - drm/panel: nt35510: Do not fail if DSI read fails (bsc#1012628). - perf test bpf: Free obj_buf (bsc#1012628). - bpf: Track subprog poke descriptors correctly and fix use-after-free (bsc#1012628). - bpftool: Properly close va_list 'ap' by va_end() on error (bsc#1012628). - tools: bpf: Fix error in 'make -C tools/ bpf_install' (bsc#1012628). - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path (bsc#1012628). - ipv6: tcp: drop silly ICMPv6 packet too big messages (bsc#1012628). - tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized (bsc#1012628). - tcp: annotate data races around tp->mtu_info (bsc#1012628). - tcp: consistently disable header prediction for mptcp (bsc#1012628). - ARM: dts: everest: Add phase corrections for eMMC (bsc#1012628). - ARM: dts: tacoma: Add phase corrections for eMMC (bsc#1012628). - ARM: dts: aspeed: Fix AST2600 machines line names (bsc#1012628). - vboxsf: Add support for the atomic_open directory-inode op (bsc#1012628). - vboxsf: Add vboxsf_[create|release]_sf_handle() helpers (bsc#1012628). - vboxsf: Make vboxsf_dir_create() return the handle for the created file (bsc#1012628). - vboxsf: Honor excl flag to the dir-inode create op (bsc#1012628). - kbuild: do not suppress Kconfig prompts for silent build (bsc#1012628). - dma-buf/sync_file: Don't leak fences on merge failure (bsc#1012628). - net: fddi: fix UAF in fza_probe (bsc#1012628). - net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() (bsc#1012628). - net: validate lwtstate->data before returning from skb_tunnel_info() (bsc#1012628). - net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache (bsc#1012628). - net: send SYNACK packet with accepted fwmark (bsc#1012628). - net: ti: fix UAF in tlan_remove_one (bsc#1012628). - net: qcom/emac: fix UAF in emac_remove (bsc#1012628). - net: moxa: fix UAF in moxart_mac_probe (bsc#1012628). - net: ip_tunnel: fix mtu calculation for ETHER tunnel devices (bsc#1012628). - net: bcmgenet: Ensure all TX/RX queues DMAs are disabled (bsc#1012628). - net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops (bsc#1012628). - net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment (bsc#1012628). - net: bridge: sync fdb to new unicast-filtering ports (bsc#1012628). - net/sched: act_ct: remove and free nf_table callbacks (bsc#1012628). - vmxnet3: fix cksum offload issues for tunnels with non-default udp ports (bsc#1012628). - netfilter: nf_tables: Fix dereference of null pointer flow (bsc#1012628). - net/sched: act_ct: fix err check for nf_conntrack_confirm (bsc#1012628). - netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo (bsc#1012628). - net: ipv6: fix return value of ip6_skb_dst_mtu (bsc#1012628). - net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz (bsc#1012628). - net: dsa: mv88e6xxx: enable SerDes RX stats for Topaz (bsc#1012628). - net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz (bsc#1012628). - net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz (bsc#1012628). - net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz (bsc#1012628). - net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz (bsc#1012628). - net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear (bsc#1012628). - f2fs: Show casefolding support only when supported (bsc#1012628). - mm/userfaultfd: fix uffd-wp special cases for fork() (bsc#1012628). - mm/thp: simplify copying of huge zero page pmd when fork (bsc#1012628). - Revert "mm/shmem: fix shmem_swapin() race with swapoff" (bsc#1012628). - Revert "swap: fix do_swap_page() race with swapoff" (bsc#1012628). - arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file (bsc#1012628). - firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string (bsc#1012628). - cifs: prevent NULL deref in cifs_compose_mount_options() (bsc#1012628). - s390: introduce proper type handling call_on_stack() macro (bsc#1012628). - s390/traps: do not test MONITOR CALL without CONFIG_BUG (bsc#1012628). - thermal/core/thermal_of: Stop zone device before unregistering it (bsc#1012628). - perf/x86/intel/uncore: Clean up error handling path of iio mapping (bsc#1012628). - sched/fair: Fix CFS bandwidth hrtimer expiry type (bsc#1012628). - scsi: qedf: Add check to synchronize abort and flush (bsc#1012628). - scsi: libfc: Fix array index out of bound exception (bsc#1012628). - scsi: libsas: Add LUN number check in .slave_alloc callback (bsc#1012628). - scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 (bsc#1012628). - rtc: max77686: Do not enforce (incorrect) interrupt trigger type (bsc#1012628). - arch/arm64/boot/dts/marvell: fix NAND partitioning scheme (bsc#1012628). - kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set (bsc#1012628). - arm64: dts: qcom: sm8150: Disable Adreno and modem by default (bsc#1012628). - arm64: dts: qcom: sm8250: Fix pcie2_lane unit address (bsc#1012628). - thermal/drivers/sprd: Add missing of_node_put for loop iteration (bsc#1012628). - thermal/drivers/imx_sc: Add missing of_node_put for loop iteration (bsc#1012628). - thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1 (bsc#1012628). - thermal/core: Correct function name thermal_zone_device_unregister() (bsc#1012628). - arm64: dts: imx8: conn: fix enet clock setting (bsc#1012628). - arm64: dts: imx8mq: assign PCIe clocks (bsc#1012628). - arm64: dts: imx8mn-beacon-som: Assign PMIC clock (bsc#1012628). - arm64: dts: ls208xa: remove bus-num from dspi node (bsc#1012628). - arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory (bsc#1012628). - firmware: tegra: bpmp: Fix Tegra234-only builds (bsc#1012628). - soc/tegra: fuse: Fix Tegra234-only builds (bsc#1012628). - ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured (bsc#1012628). - arm64: dts: qcom: sc7180: Add wakeup delay for adau codec (bsc#1012628). - ARM: dts: stm32: fix stpmic node for stm32mp1 boards (bsc#1012628). - ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM (bsc#1012628). - ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM (bsc#1012628). - ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM (bsc#1012628). - ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply (bsc#1012628). - ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 (bsc#1012628). - ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 (bsc#1012628). - ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings (bsc#1012628). - ARM: dts: rockchip: fix supply properties in io-domains nodes (bsc#1012628). - arm64: dts: juno: Update SCPI nodes as per the YAML schema (bsc#1012628). - i3c: master: svc: drop free_irq of devm_request_irq allocated irq (bsc#1012628). - ARM: dts: bcm283x: Fix up GPIO LED node names (bsc#1012628). - ARM: dts: bcm283x: Fix up MMC node names (bsc#1012628). - ARM: dts: aspeed: Everest: Fix cable card PCA chips (bsc#1012628). - firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected (bsc#1012628). - firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig (bsc#1012628). - memory: tegra: Fix compilation warnings on 64bit platforms (bsc#1012628). - ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings (bsc#1012628). - ARM: dts: stm32: fix RCC node name on stm32f429 MCU (bsc#1012628). - ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards (bsc#1012628). - ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin (bsc#1012628). - ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2 (bsc#1012628). - ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 (bsc#1012628). - arm64: dts: qcom: sc7180: Move rmtfs memory region (bsc#1012628). - arm64: dts: qcom: sm8250: fix display nodes (bsc#1012628). - arm64: dts: qcom: sm8350: fix the node unit addresses (bsc#1012628). - ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant (bsc#1012628). - ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees (bsc#1012628). - arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction (bsc#1012628). - arm64: tegra: Add PMU node for Tegra194 (bsc#1012628). - ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names (bsc#1012628). - ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios (bsc#1012628). - ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios (bsc#1012628). - ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios (bsc#1012628). - kbuild: sink stdout from cmd for silent build (bsc#1012628). - arm64: dts: renesas: beacon: Fix USB ref clock references (bsc#1012628). - arm64: dts: renesas: beacon: Fix USB extal reference (bsc#1012628). - rtc: mxc_v2: add missing MODULE_DEVICE_TABLE (bsc#1012628). - ARM: dts: ux500: Fix orientation of Janice accelerometer (bsc#1012628). - ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value (bsc#1012628). - ARM: dts: ux500: Fix some compatible strings (bsc#1012628). - ARM: dts: ux500: Fix orientation of accelerometer (bsc#1012628). - ARM: dts: ux500: Rename gpio-controller node (bsc#1012628). - ARM: dts: ux500: Fix interrupt cells (bsc#1012628). - arm64: dts: rockchip: fix regulator-gpio states array (bsc#1012628). - ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info (bsc#1012628). - ARM: dts: imx6: phyFLEX: Fix UART hardware flow control (bsc#1012628). - soc: mediatek: add missing MODULE_DEVICE_TABLE (bsc#1012628). - soc: bcm: brcmstb: remove unused variable 'brcmstb_machine_match' (bsc#1012628). - ARM: dts: BCM5301X: Fix pinmux subnodes names (bsc#1012628). - ARM: dts: Hurricane 2: Fix NAND nodes names (bsc#1012628). - ARM: dts: BCM63xx: Fix NAND nodes names (bsc#1012628). - ARM: NSP: dts: fix NAND nodes names (bsc#1012628). - ARM: Cygnus: dts: fix NAND nodes names (bsc#1012628). - ARM: brcmstb: dts: fix NAND nodes names (bsc#1012628). - ARM: dts: BCM5301X: Fix NAND nodes names (bsc#1012628). - reset: ti-syscon: fix to_ti_syscon_reset_data macro (bsc#1012628). - arm64: dts: rockchip: Fix power-controller node names for rk3399 (bsc#1012628). - arm64: dts: rockchip: Fix power-controller node names for rk3328 (bsc#1012628). - arm64: dts: rockchip: Fix power-controller node names for px30 (bsc#1012628). - ARM: dts: rockchip: Fix power-controller node names for rk3288 (bsc#1012628). - ARM: dts: rockchip: Fix power-controller node names for rk3188 (bsc#1012628). - ARM: dts: rockchip: Fix power-controller node names for rk3066a (bsc#1012628). - ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x (bsc#1012628). - ARM: dts: rockchip: Fix the timer clocks order (bsc#1012628). - arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi (bsc#1012628). - arm64: dts: rockchip: Use only supported PCIe link speed on rk3399 (bsc#1012628). - ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 (bsc#1012628). - ARM: dts: rockchip: Fix thermal sensor cells o rk322x (bsc#1012628). - ARM: dts: gemini: add device_type on pci (bsc#1012628). - ARM: dts: gemini: rename mdio to the right name (bsc#1012628). - commit d9d5075 - r8152: Fix a deadlock by doubly PM resume (bsc#1186194). - r8152: Fix potential PM refcount imbalance (bsc#1186194). - commit f6cd057
==== libreoffice ==== Subpackages: libreoffice-base libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-en_GB libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit
- Source profile.d/alljava.sh from either /etc (if found) or /usr/etc).
==== libzypp ==== Version update (17.27.0 -> 17.28.0)
- Rephrase vendor conflict message in case 2 packages are involved (bsc#1187760) This covers the case where not the packages itself would change its vendor, but replaces a package from a different vendor. - Fix solver jobs for PTFs (bsc#1186503) - spec: switch to pkgconfig(openssl) - Show key fpr from signature when signature check fails (bsc#1187224) Rpm by default only shows the short key ID when checking the signature of a package fails. This patch reads the signatures from the RPM headers and replaces she short IDs with the key fingerprints fetched from the signatures. - Implement alternative single transaction commit strategy. This patch adds a experimental commit strategy that runs all operations in a single rpm transaction, speeding up the execution a lot. - Use ZYPP_MEDIANETWORK=1 to enable the experimental new media backend. - Implement zchunk download, refactor Downloader backend. - Fix purge-kernels fails with kernels from Kernel:HEAD (bsc#1187738) There recently was a change in the kernel package naming scheme in regards to rc kernels. Since kernel upstream uses characters in the version that are not allowed in rpm versions a "-rc" was previously replaced with ".rc" which broke sorting by version, to fix this issue it was replaced with "~rc", which unfortunately broke the purge-kernels logic. This patch makes sure purge-kernel does apply the same conversion. - version 17.28.0 (22)
==== lua54 ====
- Update upstream-bugs.patch and upstream-bugs-test.patch to fix bugs 4,5,6 for build and tests respectively.
==== metamail ====
- Add simple mimelang tool to be able to check unicode block of UTF-8 MIME encoded e-mail subjects
==== mousepad ==== Version update (0.5.5 -> 0.5.6) Subpackages: libmousepad0 mousepad-lang
- Update to version 0.5.6 * Add session backup and restore * Remember windows and tabs (gxo#apps/mousepad#21, gxo#apps/mousepad!108) * Handle unsaved documents (gxo#apps/mousepad#32, gxo#apps/mousepad!109) * DE session support (gxo#apps/mousepad#3, gxo#apps/mousepad!110) * Extend the use of recent history (gxo#apps/mousepad!107) * Add use of `GtkSourceView:smart-backspace` (gxo#apps/mousepad!101) * Add a "Move Words" action (gxo#apps/mousepad!100) * Add a setting to control tab expansion (gxo#apps/mousepad#100) * Prefs dialog: Substitute CSD for status bar visibility * Add a "File" tab to the prefs dialog (gxo#apps/mousepad!108) * Make search input fields less flickery (gxo#apps/mousepad!104) * Allow saving non-existent, empty but named file (gxo#apps/mousepad#120, gxo#apps/mousepad!103) * Enable "Save" action for read-only documents (gxo#apps/mousepad#126, gxo#apps/mousepad!103) * Make "Find as you type" an option (gxo#apps/mousepad!102) * Reveal hidden setting "indent-on-tab" (gxo#apps/mousepad!101) * A review of duplicated view-related actions (gxo#apps/mousepad#127) * Add a test plugin to monitor application state (gxo#apps/mousepad!105) * Add a test script for Mousepad (gxo#apps/mousepad!99) * Filter notebook click events also on y-coordinate (gxo#apps/mousepad#144) * Allow to open files from the trash can (gxo#apps/mousepad#141, gxo#apps/mousepad!112) * Monitor file deletion (gxo#apps/mousepad#140, gxo#apps/mousepad!111) * Printing: Create config file if it does not exist * Check all windows for the file to be opened * Fix wrong externally modified document in some situations * Plugin support: Properly handle plugin settings (gxo#apps/mousepad#136) * Direct monitoring of symlink targets * Set the state of submenu actions * print-dialog: Fix some memory leaks * Fix a type inconsistency in the "encoding-changed" signal * Always check if the user has explicitly set a filetype * Fix monitoring events to listen to * Ensure statefull actions exist until their state is recovered * Fix GVariant-related memory leaks * Do not warn if the plugin directory does not exist * Add a sanity check on the window for "Externally Modified" * Do not set the style scheme id as translatable * Properly update recent menu in case of file deletion * CSD: Set the decoration layout for all windows * Add a sanity check on file location for monitoring * Add "preferences" action to `mousepad.desktop` (gxo#apps/mousepad#130) * Translation Updates
==== mtools ==== Version update (4.0.31 -> 4.0.34)
- mtools 4.0.34: * Fix mcopy -s issue - includes changes from 4.0.33: * Fix support for partitions * Add support for image files on command line to mcat - includes changes from 4.0.32: * Simplify algorithm that choses filesystem parameters for format, and align it more closely with what Win7 does * Fix mformatting XDF when XDF not explicitly specified on mformat command line * easier way to enter sizes on mformat command line (mformat -C -T 1440K) * For small sizes, mformat assumes floppy geometries (heads 1 or 2, tracks 40 or 80) * Handle attempts to mformat too small filesystems more gracefully * Enable minfo to print out additional mformat command line parameters, if the present filesystem uses non-default values for these * minfo no longer prints bigsect if smallsect is set * for remap filter, error when trying to write non-zero data to unmapped sectors - drop mtools-autoconf.diff, no longer needed - drop mtools-fat-bits.diff, drop candidate for some time
==== mutter ==== Subpackages: mutter-lang
- Synchronize changelog between SLE, Leap and Factory. - Disable eglstream on Leap/SLE by now since it is under review. - Add versioned BuildRequires to pkgconfig(libinput): https://gitlab.gnome.org/GNOME/mutter/-/blob/gnome-40/meson.build#L47
==== patterns-gnome ==== Subpackages: patterns-gnome-gnome patterns-gnome-gnome_basic patterns-gnome-gnome_basis patterns-gnome-gnome_basis_opt patterns-gnome-gnome_games patterns-gnome-gnome_imaging patterns-gnome-gnome_internet patterns-gnome-gnome_multimedia patterns-gnome-gnome_office patterns-gnome-gnome_utilities patterns-gnome-gnome_x11 patterns-gnome-gnome_yast patterns-gnome-sw_management_gnome
- Replace %{is_opensuse} tags with %{?is_opensuse} to remove dependency on the project defined macro.
==== perl-DBD-SQLite ====
- Add patch silence_sqlite_unicode_deprecation_warning.patch See https://github.com/DBD-SQLite/DBD-SQLite/issues/87
==== php7 ==== Version update (7.4.21 -> 7.4.22) Subpackages: php7-cli php7-ctype php7-dom php7-gd php7-gettext php7-iconv php7-json php7-mbstring php7-mysql php7-openssl php7-pdo php7-sqlite php7-tokenizer php7-xmlreader php7-xmlwriter
- updated to 7.4.22: This is a security and bug fix release. See https://www.php.net/ChangeLog-7.php#7.4.22
==== protobuf ==== Subpackages: libprotobuf-lite28 libprotobuf28 python38-protobuf
- Remove two build requires that are not needed
==== selinux-policy ==== Version update (20210419 -> 20210716) Subpackages: selinux-policy-targeted
- Update to version 20210716 - Remove interfaces for container module before building the package (bsc#1188184) - Updated * fix_init.patch * fix_systemd_watch.patch to adapt to upstream changes - Use tabrmd SELinux modules from tpm2.0-abrmd instead of storing here
==== sudo ==== Subpackages: sudo-plugin-python
- Fix LC_TIME incorrectly named LC_ATIME
==== suitesparse ==== Subpackages: libamd2 libcamd2 libccolamd2 libcholmod3 libcolamd2 libsuitesparseconfig5 libumfpack5
- Enable openblas on riscv64
==== systemd ==== Version update (248.3 -> 248.6) Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-container systemd-doc systemd-lang systemd-logger systemd-sysvinit udev
- Import commit 73e9e6fb847513c6d62f2fb445778ef5bc0fe516 (merge of v248.6) For a complete list of changes, visit: https://github.com/openSUSE/systemd/compare/cb29bcc5ef2c0ee659686c5d229646a6... - Drop 0001-Revert-core-prevent-excessive-proc-self-mountinfo-pa.patch Commit 81107b8419c39f726fd2805517a5b9faab204e59 fixes https://github.com/systemd/systemd/issues/19464 which makes the aforementioned patch not needed anymore. - Drop 1003-basic-unit-name-adjust-comments.patch It's been merged in SUSE/v248 branch - Import commit cb29bcc5ef2c0ee659686c5d229646a6ba98ec50 (merge of v248.5) 4a1c5f34bd basic/unit-name: do not use strdupa() on a path (bsc#1188063 CVE-2021-33910) [...] For a complete list of changes, visit: https://github.com/openSUSE/systemd/compare/94efce2ee59fca15a48ff9c232c8dd7c... - Drop 1002-basic-unit-name-do-not-use-strdupa-on-a-path.patch as it was merged in v248.5. - Import commit 94efce2ee59fca15a48ff9c232c8dd7cf930c0a0 (merge of v248.4) For a complete list of changes, visit: https://github.com/openSUSE/systemd/compare/c0aecee593511e49638579cb2b9ac8aa... - Drop 1001-unit-name-generate-a-clear-error-code-when-convertin.patch as it was merged in v248.4. - Import commit c0aecee593511e49638579cb2b9ac8aaf1f8e6c8 42ec1d537a login: use a hwdb entry for tagging Parallels' fb devices with 'master-of-seat' tag ecc7c7b462 login: use a hwdb entry for tagging HyperV's fb devices with 'master-of-seat' tag a4cfd70476 login: XGI Z7/Z9 (XG20 core) graphic chip requires master-of-seat to be set (bsc#1187154) ef553e0199 sd-dhcp-client: tentatively ignore FORCERENEW command (bsc#1185972 CVE-2020-13529) aae6c575fc sd-dhcp-client: logs when dhcp client unexpectedly gains a new lease 258a3d2043 sd-dhcp-client: shorten code a bit 0a80303114 sd-dhcp-client: check error earlier and reduce indentation
==== tftp ====
- correct source url to new location - Use systemd-sysusers external package
==== virtualbox ==== Version update (6.1.24 -> 6.1.26) Subpackages: virtualbox-guest-tools virtualbox-guest-x11
- Version bump to 6.1.26 (released July 28 2021 by Oracle) This is a maintenance release. The following items were fixed and/or added: VMSVGA: fixed VM screen artifacts after restoring from saved state (bug #20067) Storage: Fixed audio endianness for certain CUE sheet CD/DVD images. VBoxHeadless: Running VM will save its state on host shutdown VBoxManage: Fix OS detection for Ubuntu 20.10 ISO with unattended install Linux Additions: Fixed mouse pointer offsetting issue for VMSVGA graphics adapter in multi-monitor VM setup (6.1.24 regression) File "fix_ordering_of_qt_includes.patch" added for Leap and SLR builds.
==== virtualbox-kmp ==== Version update (6.1.24_k5.13.4_1 -> 6.1.26_k5.13.6_1)
- Version bump to 6.1.26 (released July 28 2021 by Oracle) This is a maintenance release. The following items were fixed and/or added: VMSVGA: fixed VM screen artifacts after restoring from saved state (bug #20067) Storage: Fixed audio endianness for certain CUE sheet CD/DVD images. VBoxHeadless: Running VM will save its state on host shutdown VBoxManage: Fix OS detection for Ubuntu 20.10 ISO with unattended install Linux Additions: Fixed mouse pointer offsetting issue for VMSVGA graphics adapter in multi-monitor VM setup (6.1.24 regression) File "fix_ordering_of_qt_includes.patch" added for Leap and SLR builds.
==== webkit2gtk3 ==== Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles
- Add BuildRequires pkgconfig(glproto) for SLE and Leap which have not included the new packaging of the relevant headers.
==== xorg-x11-server ==== Version update (1.20.12 -> 1.20.13) Subpackages: xorg-x11-server-Xvfb xorg-x11-server-extra xorg-x11-server-sdk
- Update to version 1.20.13 * bugfix release - supersedes U_present-get_crtc-should-not-return-crtc-when-its-scr.patch, U_modesetting-unflip-not-possible-when-glamor-is-not-s.patch
==== yast2-country ==== Version update (4.4.1 -> 4.4.2) Subpackages: yast2-country-data
- Add the AFNOR standardized French keyboard layout (NF Z71-300) (bsc#1188867) - 4.4.2
==== yast2-network ==== Version update (4.4.21 -> 4.4.22)
- Fix write of device routes. (bsc#1188908) - 4.4.22
==== yast2-theme ==== Version update (4.4.1 -> 4.4.2) Subpackages: yast2-theme-breeze
- Fix the icons' style and minify them (gh#yast/yast-theme#138) - 4.4.2
==== zypper ==== Version update (1.14.46 -> 1.14.48) Subpackages: zypper-log zypper-needs-restarting
- Support new reports for singletrans rpm commit. - BuildRequires: libzypp-devel >= 17.27.1. For lock/query comments. - Prompt: choose exact match if prompt options are not prefix free (bsc#1188156) - Install summary: Show new and removed packages closer to the prompt (fixes #403) These packages are usually more interesting than the updated ones. In case of doubt less scrolling is needed to see them. - Add need reboot/restart hint to XML install summary (bsc#1188435) - Add comment option for lock command (fixes #388). - version 1.14.48 - Quick fix obs:// platform guessing for Leap (bsc#1187425) - man: point out more clearly that patches update affected packages to the latest version (bsc#1187466) - version 1.14.47
hi,
Am 04.08.21 um 03:00 schrieb Dominique Leuenberger:
systemd (248.3 -> 248.6)
==== systemd ==== Version update (248.3 -> 248.6) Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-container systemd-doc systemd-lang systemd-logger systemd-sysvinit udev
even udev is specified as subpackage of systemd it is not automatically selected when updating systemd.
as i know, that, when i update systemd, i also have to update udev, i always manually select also udev to be updated, but today i forgot this, and after reboot my system didn't work any more.
i was able to download the udev and libudev1 packages with a live-system, and then install it on my broken system, and now it is working again.
BUT shouldn't there be a dependency from udev and libudev1 to systemd, so that, when someone tries to update systemd, the udev packages get selected automatically?
so that such a broken system can't happen any more.
Hi,
Do you update the systemd only, not doing zypper dup?
On 2021-08-04 21:58, Rainer Klier wrote:
hi,
Am 04.08.21 um 03:00 schrieb Dominique Leuenberger:
systemd (248.3 -> 248.6)
==== systemd ==== Version update (248.3 -> 248.6) Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-container systemd-doc systemd-lang systemd-logger systemd-sysvinit udev
even udev is specified as subpackage of systemd it is not automatically selected when updating systemd.
as i know, that, when i update systemd, i also have to update udev, i always manually select also udev to be updated, but today i forgot this, and after reboot my system didn't work any more.
i was able to download the udev and libudev1 packages with a live-system, and then install it on my broken system, and now it is working again.
BUT shouldn't there be a dependency from udev and libudev1 to systemd, so that, when someone tries to update systemd, the udev packages get selected automatically?
so that such a broken system can't happen any more.
hi,
Am 04.08.21 um 14:03 schrieb Konstantin Voinov:
Hi,
Do you update the systemd only, not doing zypper dup?
no, i selected the systemd packages manually in yast.
and then clicked on the button to install, and forgot to also select the udev packages.
On Wed, Aug 04, Rainer Klier wrote:
so that such a broken system can't happen any more.
If you follow the advice and use "zypper dup" instead of updating single selected packages, this would not happen, too ;)
Thorsten
On 8/4/21 2:05 PM, Thorsten Kukuk wrote:
On Wed, Aug 04, Rainer Klier wrote:
so that such a broken system can't happen any more.
If you follow the advice and use "zypper dup" instead of updating single selected packages, this would not happen, too ;)
His point is still valid though. If the binary package of udev and systemd need to have matching version numbers [1], this should be expressed in the BuildRequires of the src:systemd spec file.
zypper shouldn't make it possible here to shoot yourself into the foot.
Adrian
[1] I haven't verified whether this actually holds true, FWIW.
On Wed, Aug 4, 2021 at 3:31 PM John Paul Adrian Glaubitz adrian.glaubitz@suse.com wrote:
On 8/4/21 2:05 PM, Thorsten Kukuk wrote:
On Wed, Aug 04, Rainer Klier wrote:
so that such a broken system can't happen any more.
If you follow the advice and use "zypper dup" instead of updating single selected packages, this would not happen, too ;)
His point is still valid though. If the binary package of udev and systemd need to have matching version numbers [1], this should be expressed in the BuildRequires of the
No, it should be Requires, not BuildRequires.
src:systemd spec file.
zypper shouldn't make it possible here to shoot yourself into the foot.
Adrian
[1] I haven't verified whether this actually holds true, FWIW.
If you follow the advice and use "zypper dup" instead of updating single selected packages, this would not happen, too ;)
His point is still valid though. If the binary package of udev and systemd need to have matching version numbers [1], this should be expressed in the BuildRequires of the
No, it should be Requires, not BuildRequires.
Yes, Requires, of course. That was a brain fart, sorry.
Adrian
On Wed, Aug 4, 2021 at 8:31 AM John Paul Adrian Glaubitz adrian.glaubitz@suse.com wrote:
On 8/4/21 2:05 PM, Thorsten Kukuk wrote:
On Wed, Aug 04, Rainer Klier wrote:
so that such a broken system can't happen any more.
If you follow the advice and use "zypper dup" instead of updating single selected packages, this would not happen, too ;)
His point is still valid though. If the binary package of udev and systemd need to have matching version numbers [1], this should be expressed in the BuildRequires of the src:systemd spec file.
zypper shouldn't make it possible here to shoot yourself into the foot.
Adrian
[1] I haven't verified whether this actually holds true, FWIW.
There's a fairly common openSUSE footgun where people do requires on subpackages with something like "foo = %{version}" instead of "foo = %{version}-%{release}", which creates this problem because it doesn't tell the package manager to keep everything upgraded together. This is *especially* a problem if you are patching things and only bumping the release instead of the version, and the patch can introduce ABI or interface differences. People seem to be under the mistaken impression that there's some magical pixie dust that always resolves these issues, but there isn't.
In this circumstance, though, there's a version upgrade, so that isn't the issue. And even so, the systemd package *mostly* avoids this footgun. However, udev does *not* have a "Requires: systemd%{?_isa} = %{version}-%{release}" stanza[1], even though it should because that's where libsystemd-shared (the internal library that is used by systemd services) lives. So getting out of sync is actually possible.
[1]: https://code.opensuse.org/package/systemd/blob/098d77b61940503c85313ff49fa06...
On 04.08.21 13:58, Rainer Klier wrote:
hi,
Am 04.08.21 um 03:00 schrieb Dominique Leuenberger:
systemd (248.3 -> 248.6)
==== systemd ==== Version update (248.3 -> 248.6) Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-container systemd-doc systemd-lang systemd-logger systemd-sysvinit udev
even udev is specified as subpackage of systemd it is not automatically selected when updating systemd.
as i know, that, when i update systemd, i also have to update udev, i always manually select also udev to be updated, but today i forgot this, and after reboot my system didn't work any more.
"didn't work" is not enough information to suggest the best way to fix this.
Am 04.08.21 um 14:39 schrieb Stefan Seyfried:
On 04.08.21 13:58, Rainer Klier wrote:
hi,
even udev is specified as subpackage of systemd it is not automatically selected when updating systemd.
as i know, that, when i update systemd, i also have to update udev, i always manually select also udev to be updated, but today i forgot this, and after reboot my system didn't work any more.
"didn't work" is not enough information to suggest the best way to fix this.
i didn't quote the error details, because i have anyhow solved it by installing the missing udev packages.
in fact it was a symbol lookup error from one of the udev packages.
it didn't find a method.
so network was not able to start, X was not able to start, and so on.
at the moment i saw the symbol lookup error, i knew that i have forgotten to also update the udev packages.
there is no fix needed in the situation, where the udev packages are too old for systemd.
the needed fix, in my eyes is, that when you select systemd for update in yast, the udev packages should be autoselected, as it is with many other packages.
On 04.08.21 15:31, Rainer Klier wrote:
Am 04.08.21 um 14:39 schrieb Stefan Seyfried:
"didn't work" is not enough information to suggest the best way to fix this.
i didn't quote the error details, because i have anyhow solved it by installing the missing udev packages.
in fact it was a symbol lookup error from one of the udev packages.
In that case probably upstream has borked it (I would not be surprised with *this* particular upstream) by not bumping library .so versions properly.
So probably the only solution we can implement is to let udev, libudev, systemd, libsystemd depend all on each other in exact matching %{version}-%{release} pairs... :-(
Am 04.08.21 um 20:09 schrieb Stefan Seyfried:
On 04.08.21 15:31, Rainer Klier wrote:
i didn't quote the error details, because i have anyhow solved it by installing the missing udev packages.
in fact it was a symbol lookup error from one of the udev packages.
In that case probably upstream has borked it (I would not be surprised with *this* particular upstream) by not bumping library .so versions properly.
So probably the only solution we can implement is to let udev, libudev, systemd, libsystemd depend all on each other in exact matching %{version}-%{release} pairs... :-(
this was exactly my idea/question/wish in the first place.
On Wednesday 2021-08-04 20:09, Stefan Seyfried wrote:
On 04.08.21 15:31, Rainer Klier wrote:
Am 04.08.21 um 14:39 schrieb Stefan Seyfried:
"didn't work" is not enough information to suggest the best way to fix this.
i didn't quote the error details, because i have anyhow solved it by installing the missing udev packages.
in fact it was a symbol lookup error from one of the udev packages.
In that case probably upstream has borked it (I would not be surprised with *this* particular upstream) by not bumping library .so versions properly.
So probably the only solution we can implement is to let udev, libudev, systemd, libsystemd depend all on each other in exact matching %{version}-%{release} pairs... :-(
Surely, there's the possibility to only encode a dependency on the version number, not the package itself. Something along the lines of
Requires: (x >= %version-%release if x)
Hello,
On 2021-08-04 20:09, Stefan Seyfried wrote:
So probably the only solution we can implement is to let udev, libudev, systemd, libsystemd depend all on each other in exact matching %{version}-%{release} pairs... :-(
I wonder what would be actually bad with that?
According to what "rpm -qi" shows as "Source RPM" e.g. on my openSUSE Leap 15.2 system those installed RPM binary packages
libsystemd0-234-lp152.31.31.1.x86_64 libudev1-234-lp152.31.31.1.x86_64 systemd-234-lp152.31.31.1.x86_64 systemd-bash-completion-234-lp152.31.31.1.noarch systemd-container-234-lp152.31.31.1.x86_64 systemd-network-234-lp152.31.31.1.x86_64 systemd-sysvinit-234-lp152.31.31.1.x86_64 udev-234-lp152.31.31.1.x86_64
have the same source RPM
systemd-234-lp152.31.31.1.src.rpm
In general it makes sense to let all RPM binary packages that are built from the same source tarball depend all on each other by exact matching RPM %{version}-%{release} because in general upstream considers all what they provide as one same source tarball as one same thing where interdependencies within that one same thing are not specifically taken into account.
Poblems with interdependencies within that one same thing are created by those who spilt that one same thing into parts.
Of course RPM package maintainers must always keep track of all interdependencies within that one same thing because they cannot rely on upstream to do that right but in practice that is impossible with reasonable effort.
So in practice it makes sense to let by default all RPM binary packages that are built from the same source tarball depend all on each other by exact RPM %{version}-%{release} unless RPM package maintainers know for sure where exact RPM %{version}-%{release} dependencies are not needed.
What I like to say is:
It makes sense to split one same piece of upstream software into parts so end-users don't have to install all of it and that parts should by default depend all on each other by exact RPM %{version}-%{release} to make the split maintainable with reasonable effort.
Kind Regards Johannes Meixner
On 05.08.21 08:51, jsmeix wrote:
What I like to say is:
It makes sense to split one same piece of upstream software into parts so end-users don't have to install all of it and that parts should by default depend all on each other by exact RPM %{version}-%{release} to make the split maintainable with reasonable effort.
Still, the real problem here is, that libudev gained new functionality without its soversion being properly adjusted.
Every other piece of software could have fallen into the same trap.
Hello,
On 2021-08-05 14:56, Stefan Seyfried wrote:
On 05.08.21 08:51, jsmeix wrote:
What I like to say is:
It makes sense to split one same piece of upstream software into parts so end-users don't have to install all of it and that parts should by default depend all on each other by exact RPM %{version}-%{release} to make the split maintainable with reasonable effort.
Still, the real problem here is, that libudev gained new functionality without its soversion being properly adjusted.
Every other piece of software could have fallen into the same trap.
I don't know the details of the changes in libudev here.
Perhaps libudev also provides some "private things" that are only used by what is in the same tarball together with libudev so no other piece of "external" software would be affected?
We had to learn that the hard way a long time ago because libcups also provides "private functions" that are only used by what is in the CUPS tarball but we did not have an exact RPM %{version}-%{release} dependency beween libcups and the other RPMs built from the CUPS tarball and once there was some libcups fix that let cupsd segfault because only libcups got updated but not all the rest of what we built from the CUPS tarball.
Kind Regards Johannes Meixner
On Thursday 2021-08-05 14:56, Stefan Seyfried wrote:
It makes sense to split one same piece of upstream software into parts so end-users don't have to install all of it and that parts should by default depend all on each other by exact RPM %{version}-%{release} to make the split maintainable with reasonable effort.
Still, the real problem here is, that libudev gained new functionality without its soversion being properly adjusted.
SO versions only encode ABI, not behavior.
On Wed, Aug 4, 2021 at 2:09 PM Stefan Seyfried stefan.seyfried@googlemail.com wrote:
On 04.08.21 15:31, Rainer Klier wrote:
Am 04.08.21 um 14:39 schrieb Stefan Seyfried:
"didn't work" is not enough information to suggest the best way to fix this.
i didn't quote the error details, because i have anyhow solved it by installing the missing udev packages.
in fact it was a symbol lookup error from one of the udev packages.
In that case probably upstream has borked it (I would not be surprised with *this* particular upstream) by not bumping library .so versions properly.
Huh ? There might be an (easy to fix and to err) missing entry in the symbol versioning scripts but the so version I believe will not change.. We ned to know what symbol exactly of course.
Am 05.08.21 um 18:47 schrieb Cristian Rodríguez:
On Wed, Aug 4, 2021 at 2:09 PM Stefan Seyfried stefan.seyfried@googlemail.com wrote:
On 04.08.21 15:31, Rainer Klier wrote:
in fact it was a symbol lookup error from one of the udev packages.
In that case probably upstream has borked it (I would not be surprised with *this* particular upstream) by not bumping library .so versions properly.
Huh ? There might be an (easy to fix and to err) missing entry in the symbol versioning scripts but the so version I believe will not change.. We ned to know what symbol exactly of course.
i tried to find the error messages systemd/udev created while booting yesterday.
in which file do i find the boot messages which was created 2 days ago.
the Journal file only contains today's messages.
On Aug 05 2021, Rainer Klier wrote:
in which file do i find the boot messages which was created 2 days ago.
the Journal file only contains today's messages.
If you have configured a persistent journal, you can use journalctl -b to access the log of previous boots.
Andreas.
On Wednesday 2021-08-04 14:39, Stefan Seyfried wrote:
Am 04.08.21 um 03:00 schrieb Dominique Leuenberger:
systemd (248.3 -> 248.6)
as i know, that, when i update systemd, i also have to update udev, i always manually select also udev to be updated, but today i forgot this, and after reboot my system didn't work any more.
"didn't work" is not enough information to suggest the best way to fix this.
I feel you. But, on the other hand, it is not totally wrong for developers either to run with the default assumption that reverting the change likely can fix it.
Rainer Klier composed on 2021-08-04 13:58 (UTC+0200):
Dominique Leuenberger composed:
systemd (248.3 -> 248.6)
==== systemd ==== Version update (248.3 -> 248.6) Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-container systemd-doc systemd-lang systemd-logger systemd-sysvinit udev
even udev is specified as subpackage of systemd it is not automatically selected when updating systemd.
as i know, that, when i update systemd, i also have to update udev, i always manually select also udev to be updated, but today i forgot this, and after reboot my system didn't work any more.
It would probably be harder to forget if TW was using packaging names the way of the mother of systemd:
# inxi -S System: Host: g5eas Kernel: 5.11.16-1-default x86_64 bits: 64 Desktop: KDE Plasma 5.21.5 Distro: openSUSE Tumbleweed 20210605 # rpm -qa | egrep 'udev|systemd' | sort libfido2-udev-1.7.0-1.2.noarch libgudev-1_0-0-234-1.5.x86_64 libmtp-udev-1.1.18-1.5.x86_64 libsystemd0-246.13-2.1.x86_64 libudev1-246.13-2.1.x86_64 python38-pyudev-0.22.0-3.5.noarch systemd-246.13-2.1.x86_64 systemd-default-settings-0.7-1.2.noarch systemd-default-settings-branding-openSUSE-0.7-1.2.noarch systemd-network-246.13-2.1.x86_64 systemd-presets-branding-openSUSE-12.2-17.3.noarch systemd-presets-common-SUSE-15-18.1.noarch systemd-sysvinit-246.13-2.1.x86_64 udev-246.13-2.1.x86_64 util-linux-systemd-2.36.2-1.18.x86_64 # 15 packages in minimalist(?) installation
# uname -r 5.11.19-300.fc34.x86_64 # rpm -qa | egrep 'systemd|udev' | sort libgudev-236-1.fc34.x86_64 python3-systemd-234-16.fc34.x86_64 rpm-plugin-systemd-inhibit-4.16.1.3-1.fc34.x86_64 systemd-248.3-1.fc34.x86_64 systemd-bootchart-233-8.fc34.x86_64 systemd-libs-248.3-1.fc34.x86_64 systemd-networkd-248.3-1.fc34.x86_64 systemd-pam-248.3-1.fc34.x86_64 systemd-rpm-macros-248.3-1.fc34.noarch systemd-udev-248.3-1.fc34.x86_64 # 10 packages in minimalist installation
-
Andreas Schwab -
Andrei Borzenkov -
Cristian Rodríguez -
Dominique Leuenberger -
Felix Miata -
Jan Engelhardt -
John Paul Adrian Glaubitz -
jsmeix -
Konstantin Voinov -
Neal Gompa -
Rainer Klier -
Stefan Seyfried -
Thorsten Kukuk