April 2022 - openSUSE Commits - openSUSE Mailing Lists

commit libmediainfo for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package libmediainfo for openSUSE:Factory checked in at 2022-04-01 21:35:34 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libmediainfo (Old) and /work/SRC/openSUSE:Factory/.libmediainfo.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "libmediainfo" Fri Apr 1 21:35:34 2022 rev:23 rq:966243 version:22.03 Changes: -------- --- /work/SRC/openSUSE:Factory/libmediainfo/libmediainfo.changes 2021-09-17 23:26:35.541270466 +0200 +++ /work/SRC/openSUSE:Factory/.libmediainfo.new.1900/libmediainfo.changes 2022-04-01 21:36:41.853107760 +0200 @@ -1,0 +2,48 @@ +Thu Mar 31 14:15:50 UTC 2022 - Luigi Baldoni <aloisio(a)gmx.com> + +- Update to version 22.03 + Added features: + * NSV (Nullsoft Video): full featured support + * NSV: support of proprietary StarDiva metadata (by reverse + engineering) + * HEVC: CEA-608/708 support + * Dolby Audio Metadata: First frame of action, binaural render + modes + * Dolby Audio Metadata: 5.1 and 5.1.x downmix, 5.1 to 2.0 + downmix, associated video frame rate, trim modes + * MOV/MP4, TTML, SCC, MXF TC: time code of last frame + * EIA-608: first displayed caption type + * EIA-608: Maximum count of lines per event and total count of + lines + * EIA-608: duration of the visible content + * TTML: Total count of lines + * TTML: Maximum count of lines per event (including + overlapping times) + * TTML: Frame count, display aspect ratio + * TTML: Support of timestamps in frames + * SCC: Delay + * Matroska: Encoding settings metadata support + * MOV/MP4: Gamma metadata output + * MPEG-4/MOV: difference between audio Center and Mono when + possible + * MP4/MOV: Support of dec3 atom in wave atom + * MPEG-4/MOV: show both values in case of chan atom + ChannelLayoutTag / ChannelDescriptions mismatch + * MP4/MOV: Support of dec3 atom in wave atom + * MXF: better support of AVC streams without SPS/PPS + * ADM: display channel index of trackUIDs + Fixed bugs: + * WAV: fix freeze with 32-bit PCM + * DPX: fix regression with DPX files more than 64 MB + * Dolby E: fix crash with some invalid streams + * E-AC-3: service kind was not correctly handled + * EXR: fix of bad handling of files with long names in + attributes + * TTML: correct handling of 29.97 DF time codes + * AV1: fix of the parsing of some streams, especially the ones + with HDR metadata + * WebVTT: was not correctly handling WebVTT header with comment + * Matroska: fix false positive detection of bad CRC32 + * Several other parsing bug/crash fixes + +------------------------------------------------------------------- Old: ---- libmediainfo_21.09.tar.xz New: ---- libmediainfo_22.03.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libmediainfo.spec ++++++ --- /var/tmp/diff_new_pack.GoCXb5/_old 2022-04-01 21:36:42.353102276 +0200 +++ /var/tmp/diff_new_pack.GoCXb5/_new 2022-04-01 21:36:42.357102233 +0200 @@ -1,7 +1,7 @@ # # spec file for package libmediainfo # -# Copyright (c) 2021 SUSE LLC +# Copyright (c) 2022 SUSE LLC # Copyright (c) 2016 Packman Team <packman(a)links2linux.de> # # All modifications and additions to the file contributed by third parties @@ -19,7 +19,7 @@ %define sover 0 Name: libmediainfo -Version: 21.09 +Version: 22.03 Release: 0 Summary: Library for supplying technical and tag information about a video or audio file License: BSD-2-Clause ++++++ libmediainfo_21.09.tar.xz -> libmediainfo_22.03.tar.xz ++++++ ++++ 14656 lines of diff (skipped)

1 0

commit qqc2-breeze-style for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package qqc2-breeze-style for openSUSE:Factory checked in at 2022-04-01 21:35:33 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/qqc2-breeze-style (Old) and /work/SRC/openSUSE:Factory/.qqc2-breeze-style.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "qqc2-breeze-style" Fri Apr 1 21:35:33 2022 rev:23 rq:965934 version:5.24.4 Changes: -------- --- /work/SRC/openSUSE:Factory/qqc2-breeze-style/qqc2-breeze-style.changes 2022-03-12 17:15:59.946341839 +0100 +++ /work/SRC/openSUSE:Factory/.qqc2-breeze-style.new.1900/qqc2-breeze-style.changes 2022-04-01 21:36:41.097116052 +0200 @@ -1,0 +2,9 @@ +Tue Mar 29 16:04:41 UTC 2022 - Fabian Vogt <fabian(a)ritter-vogt.de> + +- Update to 5.24.4 + * New bugfix release + * For more details please see: + * https://kde.org/announcements/plasma/5/5.24.4 +- No code changes since 5.24.3 + +------------------------------------------------------------------- Old: ---- qqc2-breeze-style-5.24.3.tar.xz qqc2-breeze-style-5.24.3.tar.xz.sig New: ---- qqc2-breeze-style-5.24.4.tar.xz qqc2-breeze-style-5.24.4.tar.xz.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ qqc2-breeze-style.spec ++++++ --- /var/tmp/diff_new_pack.5mqFdW/_old 2022-04-01 21:36:41.649109997 +0200 +++ /var/tmp/diff_new_pack.5mqFdW/_new 2022-04-01 21:36:41.657109910 +0200 @@ -18,7 +18,7 @@ %bcond_without released Name: qqc2-breeze-style -Version: 5.24.3 +Version: 5.24.4 Release: 0 Summary: Breeze Style for Qt Quick Controls 2 License: LGPL-2.1-only OR LGPL-3.0-only ++++++ qqc2-breeze-style-5.24.3.tar.xz -> qqc2-breeze-style-5.24.4.tar.xz ++++++

1 0

commit plymouth-theme-breeze for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package plymouth-theme-breeze for openSUSE:Factory checked in at 2022-04-01 21:35:31 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/plymouth-theme-breeze (Old) and /work/SRC/openSUSE:Factory/.plymouth-theme-breeze.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "plymouth-theme-breeze" Fri Apr 1 21:35:31 2022 rev:102 rq:965931 version:5.24.4 Changes: -------- --- /work/SRC/openSUSE:Factory/plymouth-theme-breeze/plymouth-theme-breeze.changes 2022-03-12 17:15:59.122340885 +0100 +++ /work/SRC/openSUSE:Factory/.plymouth-theme-breeze.new.1900/plymouth-theme-breeze.changes 2022-04-01 21:36:39.265136144 +0200 @@ -1,0 +2,9 @@ +Tue Mar 29 16:04:41 UTC 2022 - Fabian Vogt <fabian(a)ritter-vogt.de> + +- Update to 5.24.4 + * New bugfix release + * For more details please see: + * https://kde.org/announcements/plasma/5/5.24.4 +- No code changes since 5.24.3 + +------------------------------------------------------------------- Old: ---- breeze-plymouth-5.24.3.tar.xz breeze-plymouth-5.24.3.tar.xz.sig New: ---- breeze-plymouth-5.24.4.tar.xz breeze-plymouth-5.24.4.tar.xz.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ plymouth-theme-breeze.spec ++++++ --- /var/tmp/diff_new_pack.uuNv56/_old 2022-04-01 21:36:39.873129476 +0200 +++ /var/tmp/diff_new_pack.uuNv56/_new 2022-04-01 21:36:39.877129432 +0200 @@ -36,7 +36,7 @@ %bcond_without released Name: plymouth-theme-breeze -Version: 5.24.3 +Version: 5.24.4 Release: 0 Summary: Plymouth "Breeze" theme License: GPL-2.0+ ++++++ breeze-plymouth-5.24.3.tar.xz -> breeze-plymouth-5.24.4.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/breeze-plymouth-5.24.3/CMakeLists.txt new/breeze-plymouth-5.24.4/CMakeLists.txt --- old/breeze-plymouth-5.24.3/CMakeLists.txt 2022-03-08 12:12:56.000000000 +0100 +++ new/breeze-plymouth-5.24.4/CMakeLists.txt 2022-03-29 13:14:05.000000000 +0200 @@ -1,5 +1,5 @@ project(breeze-plymouth) -set(PROJECT_VERSION "5.24.3") +set(PROJECT_VERSION "5.24.4") set(PROJECT_VERSION_MAJOR 5) cmake_minimum_required(VERSION 2.8.12 FATAL_ERROR)

1 0

commit polkit-default-privs for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package polkit-default-privs for openSUSE:Factory checked in at 2022-04-01 21:35:32 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/polkit-default-privs (Old) and /work/SRC/openSUSE:Factory/.polkit-default-privs.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "polkit-default-privs" Fri Apr 1 21:35:32 2022 rev:212 rq:966384 version:1550+20220401.41ccb1d Changes: -------- --- /work/SRC/openSUSE:Factory/polkit-default-privs/polkit-default-privs.changes 2022-03-29 18:13:46.871037739 +0200 +++ /work/SRC/openSUSE:Factory/.polkit-default-privs.new.1900/polkit-default-privs.changes 2022-04-01 21:36:40.197125922 +0200 @@ -1,0 +2,6 @@ +Fri Apr 01 09:50:52 UTC 2022 - matthias.gerstner(a)suse.com + +- Update to version 1550+20220401.41ccb1d: + * usbguard: relax read-only operations to yes + +------------------------------------------------------------------- Old: ---- polkit-default-privs-1550+20220325.163dbdf.tar.xz New: ---- polkit-default-privs-1550+20220401.41ccb1d.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ polkit-default-privs.spec ++++++ --- /var/tmp/diff_new_pack.XDyle0/_old 2022-04-01 21:36:40.773119605 +0200 +++ /var/tmp/diff_new_pack.XDyle0/_new 2022-04-01 21:36:40.777119561 +0200 @@ -23,7 +23,7 @@ %endif Name: polkit-default-privs -Version: 1550+20220325.163dbdf +Version: 1550+20220401.41ccb1d Release: 0 Summary: SUSE PolicyKit default permissions License: GPL-2.0-or-later ++++++ _servicedata ++++++ --- /var/tmp/diff_new_pack.XDyle0/_old 2022-04-01 21:36:40.817119123 +0200 +++ /var/tmp/diff_new_pack.XDyle0/_new 2022-04-01 21:36:40.821119079 +0200 @@ -1,6 +1,6 @@ <servicedata> <service name="tar_scm"> <param name="url">https://github.com/openSUSE/polkit-default-privs.git</param> - <param name="changesrevision">17694bcf069fd15194c23c411cb93dd80ad1b828</param></service></servicedata> + <param name="changesrevision">14bdb99dc5369fea18274d5aa7203b616b19961a</param></service></servicedata> (No newline at EOF) ++++++ polkit-default-privs-1550+20220325.163dbdf.tar.xz -> polkit-default-privs-1550+20220401.41ccb1d.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/polkit-default-privs-1550+20220325.163dbdf/profiles/easy new/polkit-default-privs-1550+20220401.41ccb1d/profiles/easy --- old/polkit-default-privs-1550+20220325.163dbdf/profiles/easy 2022-03-25 11:10:49.000000000 +0100 +++ new/polkit-default-privs-1550+20220401.41ccb1d/profiles/easy 2022-04-01 11:46:24.000000000 +0200 @@ -735,9 +735,9 @@ org.kde.kpmcore.externalcommand.init no:no:auth_admin_keep # D-Bus bridge connecting towards the custom IPC protocol of usbguard (bsc#1196621) -org.usbguard.Policy1.listRules no:no:auth_self_keep -org.usbguard.Devices1.listDevices no:no:auth_self_keep -org.usbguard1.getParameter no:no:auth_self_keep +org.usbguard.Policy1.listRules no:no:yes +org.usbguard.Devices1.listDevices no:no:yes +org.usbguard1.getParameter no:no:yes org.usbguard.Policy1.appendRule no:no:auth_admin_keep org.usbguard.Policy1.removeRule no:no:auth_admin_keep org.usbguard.Devices1.applyDevicePolicy no:no:auth_admin_keep diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/polkit-default-privs-1550+20220325.163dbdf/profiles/standard new/polkit-default-privs-1550+20220401.41ccb1d/profiles/standard --- old/polkit-default-privs-1550+20220325.163dbdf/profiles/standard 2022-03-25 11:10:49.000000000 +0100 +++ new/polkit-default-privs-1550+20220401.41ccb1d/profiles/standard 2022-04-01 11:46:24.000000000 +0200 @@ -737,9 +737,9 @@ org.kde.kpmcore.externalcommand.init no:no:auth_admin # D-Bus bridge connecting towards the custom IPC protocol of usbguard (bsc#1196621) -org.usbguard.Policy1.listRules no:no:auth_self_keep -org.usbguard.Devices1.listDevices no:no:auth_self_keep -org.usbguard1.getParameter no:no:auth_self_keep +org.usbguard.Policy1.listRules no:no:yes +org.usbguard.Devices1.listDevices no:no:yes +org.usbguard1.getParameter no:no:yes org.usbguard.Policy1.appendRule no:no:auth_admin org.usbguard.Policy1.removeRule no:no:auth_admin org.usbguard.Devices1.applyDevicePolicy no:no:auth_admin

1 0

commit plasma5-workspace-wallpapers for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package plasma5-workspace-wallpapers for openSUSE:Factory checked in at 2022-04-01 21:35:29 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/plasma5-workspace-wallpapers (Old) and /work/SRC/openSUSE:Factory/.plasma5-workspace-wallpapers.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "plasma5-workspace-wallpapers" Fri Apr 1 21:35:29 2022 rev:121 rq:965930 version:5.24.4 Changes: -------- --- /work/SRC/openSUSE:Factory/plasma5-workspace-wallpapers/plasma5-workspace-wallpapers.changes 2022-03-12 17:15:57.562339081 +0100 +++ /work/SRC/openSUSE:Factory/.plasma5-workspace-wallpapers.new.1900/plasma5-workspace-wallpapers.changes 2022-04-01 21:36:37.641153956 +0200 @@ -1,0 +2,9 @@ +Tue Mar 29 16:04:41 UTC 2022 - Fabian Vogt <fabian(a)ritter-vogt.de> + +- Update to 5.24.4 + * New bugfix release + * For more details please see: + * https://kde.org/announcements/plasma/5/5.24.4 +- No code changes since 5.24.3 + +------------------------------------------------------------------- Old: ---- plasma-workspace-wallpapers-5.24.3.tar.xz plasma-workspace-wallpapers-5.24.3.tar.xz.sig New: ---- plasma-workspace-wallpapers-5.24.4.tar.xz plasma-workspace-wallpapers-5.24.4.tar.xz.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ plasma5-workspace-wallpapers.spec ++++++ --- /var/tmp/diff_new_pack.b2w4ST/_old 2022-04-01 21:36:38.953139566 +0200 +++ /var/tmp/diff_new_pack.b2w4ST/_new 2022-04-01 21:36:38.957139522 +0200 @@ -18,7 +18,7 @@ %bcond_without released Name: plasma5-workspace-wallpapers -Version: 5.24.3 +Version: 5.24.4 Release: 0 BuildRequires: cmake >= 3.16 BuildRequires: extra-cmake-modules >= 0.0.12 ++++++ plasma-workspace-wallpapers-5.24.3.tar.xz -> plasma-workspace-wallpapers-5.24.4.tar.xz ++++++ /work/SRC/openSUSE:Factory/plasma5-workspace-wallpapers/plasma-workspace-wallpapers-5.24.3.tar.xz /work/SRC/openSUSE:Factory/.plasma5-workspace-wallpapers.new.1900/plasma-workspace-wallpapers-5.24.4.tar.xz differ: char 66, line 1

1 0

commit plasma5-thunderbolt for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package plasma5-thunderbolt for openSUSE:Factory checked in at 2022-04-01 21:35:28 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/plasma5-thunderbolt (Old) and /work/SRC/openSUSE:Factory/.plasma5-thunderbolt.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "plasma5-thunderbolt" Fri Apr 1 21:35:28 2022 rev:49 rq:965928 version:5.24.4 Changes: -------- --- /work/SRC/openSUSE:Factory/plasma5-thunderbolt/plasma5-thunderbolt.changes 2022-03-12 17:15:56.086337373 +0100 +++ /work/SRC/openSUSE:Factory/.plasma5-thunderbolt.new.1900/plasma5-thunderbolt.changes 2022-04-01 21:36:18.249366641 +0200 @@ -1,0 +2,9 @@ +Tue Mar 29 16:04:40 UTC 2022 - Fabian Vogt <fabian(a)ritter-vogt.de> + +- Update to 5.24.4 + * New bugfix release + * For more details please see: + * https://kde.org/announcements/plasma/5/5.24.4 +- No code changes since 5.24.3 + +------------------------------------------------------------------- Old: ---- plasma-thunderbolt-5.24.3.tar.xz plasma-thunderbolt-5.24.3.tar.xz.sig New: ---- plasma-thunderbolt-5.24.4.tar.xz plasma-thunderbolt-5.24.4.tar.xz.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ plasma5-thunderbolt.spec ++++++ --- /var/tmp/diff_new_pack.9sWCks/_old 2022-04-01 21:36:18.785360762 +0200 +++ /var/tmp/diff_new_pack.9sWCks/_new 2022-04-01 21:36:18.793360674 +0200 @@ -23,7 +23,7 @@ %define qt5_version 5.10.0 %bcond_without released Name: plasma5-thunderbolt -Version: 5.24.3 +Version: 5.24.4 Release: 0 Summary: Plasma frontend for Thunderbolt 3 security levels License: GPL-2.0-or-later ++++++ plasma-thunderbolt-5.24.3.tar.xz -> plasma-thunderbolt-5.24.4.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-thunderbolt-5.24.3/po/ca(a)valencia/kcm_bolt.po new/plasma-thunderbolt-5.24.4/po/ca(a)valencia/kcm_bolt.po --- old/plasma-thunderbolt-5.24.3/po/ca(a)valencia/kcm_bolt.po 2022-03-08 12:32:31.000000000 +0100 +++ new/plasma-thunderbolt-5.24.4/po/ca(a)valencia/kcm_bolt.po 2022-03-29 13:33:44.000000000 +0200 @@ -116,12 +116,12 @@ #: package/contents/ui/DeviceView.qml:132 #, kde-format msgid "Failed to enroll device <b>%1</b>: %2" -msgstr "Ha fallat en inscriure el dispositiu <b>%1</b>: %2" +msgstr "No s'ha pogut inscriure el dispositiu <b>%1</b>: %2" #: package/contents/ui/DeviceView.qml:119 #, kde-format msgid "Trust this Device" -msgstr "Confia en aquest dispositiu" +msgstr "Confia en este dispositiu" #: package/contents/ui/DeviceView.qml:140 #, kde-format @@ -131,7 +131,8 @@ #: package/contents/ui/DeviceView.qml:152 #, kde-format msgid "Error changing device trust: <b>%1</b>: %2" -msgstr "Error en canviar la confian��a del dispositiu: <b>%1</b>: %2" +msgstr "" +"S'ha produ��t un error en canviar la confian��a del dispositiu: <b>%1</b>: %2" #: package/contents/ui/DeviceView.qml:169 #, kde-format @@ -157,7 +158,7 @@ "This module allows you to manage Thunderbolt devices connected to your " "computer." msgstr "" -"Aquest m��dul permet gestionar els dispositius Thunderbolt connectats a " +"Este m��dul permet gestionar els dispositius Thunderbolt connectats a " "l'ordinador." #: package/contents/ui/main.qml:40 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-thunderbolt-5.24.3/po/ca(a)valencia/kded_bolt.po new/plasma-thunderbolt-5.24.4/po/ca(a)valencia/kded_bolt.po --- old/plasma-thunderbolt-5.24.3/po/ca(a)valencia/kded_bolt.po 2022-03-08 12:32:31.000000000 +0100 +++ new/plasma-thunderbolt-5.24.4/po/ca(a)valencia/kded_bolt.po 2022-03-29 13:33:44.000000000 +0200 @@ -65,4 +65,4 @@ #: kded_bolt.cpp:129 #, kde-format msgid "Failed to authorize Thunderbolt device <b>%1</b>: %2" -msgstr "Ha fallat en autoritzar el dispositiu Thunderbolt <b>%1</b>: %2" \ No newline at end of file +msgstr "No s'ha pogut autoritzar el dispositiu Thunderbolt <b>%1</b>: %2" \ No newline at end of file diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-thunderbolt-5.24.3/po/id/kcm_bolt.po new/plasma-thunderbolt-5.24.4/po/id/kcm_bolt.po --- old/plasma-thunderbolt-5.24.3/po/id/kcm_bolt.po 2022-03-08 12:32:38.000000000 +0100 +++ new/plasma-thunderbolt-5.24.4/po/id/kcm_bolt.po 2022-03-29 13:33:50.000000000 +0200 @@ -15,7 +15,6 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Lokalize 19.08.1\n" #, kde-format msgctxt "NAME OF TRANSLATORS" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-thunderbolt-5.24.3/po/zh_CN/kcm_bolt.po new/plasma-thunderbolt-5.24.4/po/zh_CN/kcm_bolt.po --- old/plasma-thunderbolt-5.24.3/po/zh_CN/kcm_bolt.po 2022-03-08 12:32:48.000000000 +0100 +++ new/plasma-thunderbolt-5.24.4/po/zh_CN/kcm_bolt.po 2022-03-29 13:34:01.000000000 +0200 @@ -3,7 +3,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-05-04 00:21+0000\n" -"PO-Revision-Date: 2022-03-05 15:07\n" +"PO-Revision-Date: 2022-03-16 15:50\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-thunderbolt-5.24.3/po/zh_CN/kded_bolt.po new/plasma-thunderbolt-5.24.4/po/zh_CN/kded_bolt.po --- old/plasma-thunderbolt-5.24.3/po/zh_CN/kded_bolt.po 2022-03-08 12:32:48.000000000 +0100 +++ new/plasma-thunderbolt-5.24.4/po/zh_CN/kded_bolt.po 2022-03-29 13:34:01.000000000 +0200 @@ -3,7 +3,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-05-04 00:21+0000\n" -"PO-Revision-Date: 2022-03-05 15:07\n" +"PO-Revision-Date: 2022-03-16 15:50\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-thunderbolt-5.24.3/src/kded/kded_bolt.notifyrc new/plasma-thunderbolt-5.24.4/src/kded/kded_bolt.notifyrc --- old/plasma-thunderbolt-5.24.3/src/kded/kded_bolt.notifyrc 2022-03-08 12:32:27.000000000 +0100 +++ new/plasma-thunderbolt-5.24.4/src/kded/kded_bolt.notifyrc 2022-03-29 13:33:41.000000000 +0200 @@ -114,7 +114,7 @@ Comment[ar]=�� Comment[az]=X��b��rdarl��q bildiri��l��ri ��n istifad�� olunur Comment[ca]=S'usa per a les notificacions d'av��s -Comment[ca@valencia]=S'usa per a les notificacions d'av��s +Comment[ca@valencia]=S'utilitza per a les notificacions d'av��s Comment[cs]=Pou��ito pro varov��n�� a upozorn��n�� Comment[da]=Bruges til advarselsbekendtg��relser Comment[de]=Verwendet f��r Warnmeldungen @@ -188,7 +188,7 @@ Comment[ar]=�� Comment[az]=X��b��rdarl��q bildiri��l��ri ��n istifad�� olunur Comment[ca]=S'usa per a les notificacions d'error -Comment[ca@valencia]=S'usa per a les notificacions d'error +Comment[ca@valencia]=S'utilitza per a les notificacions d'error Comment[cs]=Pou��ito pro upozorn��n�� na chyby Comment[da]=Bruges til bekendtg��relser om fejl Comment[de]=Verwendet f��r Fehlermeldungen

1 0

commit build for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package build for openSUSE:Factory checked in at 2022-04-01 21:35:28 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/build (Old) and /work/SRC/openSUSE:Factory/.build.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "build" Fri Apr 1 21:35:28 2022 rev:141 rq:965580 version:20220329 Changes: -------- --- /work/SRC/openSUSE:Factory/build/build.changes 2022-03-17 17:01:26.677682890 +0100 +++ /work/SRC/openSUSE:Factory/.build.new.1900/build.changes 2022-04-01 21:36:16.765382917 +0200 @@ -1,0 +2,9 @@ +Tue Mar 29 08:46:07 UTC 2022 - Adrian Schr��ter <adrian(a)suse.de> + +- docker: Add support for --root and --installroot global zypper options +- debian cross build support via multi-arch (obsoleting cbinstall remnants) +- Tumbleweed config synced +- documentation updates +- smaller bugfixes + +------------------------------------------------------------------- Old: ---- obs-build-20220315.tar.gz New: ---- obs-build-20220329.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ build.spec ++++++ --- /var/tmp/diff_new_pack.M2AleM/_old 2022-04-01 21:36:17.577374011 +0200 +++ /var/tmp/diff_new_pack.M2AleM/_new 2022-04-01 21:36:17.581373967 +0200 @@ -28,7 +28,7 @@ Summary: A Script to Build SUSE Linux RPMs License: GPL-2.0-only OR GPL-3.0-only Group: Development/Tools/Building -Version: 20220315 +Version: 20220329 Release: 0 Source: obs-build-%{version}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-build ++++++ PKGBUILD ++++++ --- /var/tmp/diff_new_pack.M2AleM/_old 2022-04-01 21:36:17.621373528 +0200 +++ /var/tmp/diff_new_pack.M2AleM/_new 2022-04-01 21:36:17.625373484 +0200 @@ -1,5 +1,5 @@ pkgname=build -pkgver=20220315 +pkgver=20220329 pkgrel=0 pkgdesc="Build packages in sandbox" arch=('i686' 'x86_64') ++++++ _service ++++++ --- /var/tmp/diff_new_pack.M2AleM/_old 2022-04-01 21:36:17.645373265 +0200 +++ /var/tmp/diff_new_pack.M2AleM/_new 2022-04-01 21:36:17.649373221 +0200 @@ -1,7 +1,7 @@ <services> <service name="tar_scm" mode="manual"> - <param name="revision">20220315</param> - <param name="version">20220315</param> + <param name="revision">20220329</param> + <param name="version">20220329</param> <param name="url">https://github.com/openSUSE/obs-build.git</param> <param name="scm">git</param> <param name="extract">dist/build.changes</param> ++++++ build.dsc ++++++ --- /var/tmp/diff_new_pack.M2AleM/_old 2022-04-01 21:36:17.669373002 +0200 +++ /var/tmp/diff_new_pack.M2AleM/_new 2022-04-01 21:36:17.685372826 +0200 @@ -1,6 +1,6 @@ Format: 1.0 Source: build -Version: 20220315 +Version: 20220329 Binary: build Maintainer: Adrian Schroeter <adrian(a)suse.de> Architecture: all ++++++ debian.changelog ++++++ --- /var/tmp/diff_new_pack.M2AleM/_old 2022-04-01 21:36:17.733372300 +0200 +++ /var/tmp/diff_new_pack.M2AleM/_new 2022-04-01 21:36:17.737372256 +0200 @@ -1,4 +1,4 @@ -build (20220315) unstable; urgency=low +build (20220329) unstable; urgency=low * Update to current git trunk - add sles11sp2 build config and adapt autodetection ++++++ obs-build-20220315.tar.gz -> obs-build-20220329.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/Build/Deb.pm new/obs-build-20220329/Build/Deb.pm --- old/obs-build-20220315/Build/Deb.pm 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/Build/Deb.pm 2022-03-29 10:52:43.000000000 +0200 @@ -366,6 +366,7 @@ $data->{'version'} = $2; $data->{'release'} = $3 if defined $3; $data->{'arch'} = $res{'ARCHITECTURE'}; + $data->{'multiarch'} = $res{'MULTI-ARCH'} if $res{'MULTI-ARCH'}; } if ($opts{'description'}) { $data->{'description'} = $res{'DESCRIPTION'}; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/Build/Debrepo.pm new/obs-build-20220329/Build/Debrepo.pm --- old/obs-build-20220315/Build/Debrepo.pm 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/Build/Debrepo.pm 2022-03-29 10:52:43.000000000 +0200 @@ -77,6 +77,7 @@ 'enhances' => 'enhances', 'filename' => 'location', 'source' => 'source', + 'multi-arch' => 'multiarch', ); my %tmap_checksums = ( diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/Build/Docker.pm new/obs-build-20220329/Build/Docker.pm --- old/obs-build-20220315/Build/Docker.pm 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/Build/Docker.pm 2022-03-29 10:52:43.000000000 +0200 @@ -111,7 +111,10 @@ sub cmd_zypper { my ($ret, @args) = @_; # skip global options - shift @args while @args && $args[0] =~ /^-/; + while (@args && $args[0] =~ /^-/) { + shift @args if $args[0] eq '-R' || $args[0] eq '--root' || $args[0] eq '--installroot'; + shift @args; + } return unless @args; if ($args[0] eq 'in' || $args[0] eq 'install') { shift @args; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/Build/Expand.pm new/obs-build-20220329/Build/Expand.pm --- old/obs-build-20220315/Build/Expand.pm 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/Build/Expand.pm 2022-03-29 10:52:43.000000000 +0200 @@ -308,6 +308,19 @@ return $ret; } +sub extractnative { + my ($config, $r, $p, $foreign) = @_; + my $ma = $config->{'multiarchh'}->{$p} || ''; + if ($ma eq 'foreign' || ($ma eq 'allowed' && $r =~ /:any/)) { + if ($expand_dbg && !grep {$r eq $_} @$foreign) { + print "added $r to foreign dependencies\n"; + } + push @$foreign, $r; + return 1; + } + return 0; +} + sub expand { my ($config, @p) = @_; @@ -341,6 +354,10 @@ @directdepsend = grep {!/^-/} splice(@directdepsend, @p + 1); } + my $extractnative; + (undef, $extractnative) = splice(@p, 0, 2) if @p > 1 && $p[0] eq '--extractnative--' && ref($p[1]); + undef $extractnative if $extractnative && !%{$config->{'multiarchh'} || {}}; + my %p; # expanded packages my @todo; # dependencies to install my @todo_inst; # packages we decided to install @@ -349,6 +366,7 @@ my @rec_todo; # installed todo my @error; my %aconflicts; # packages we are conflicting with + my @native; # handle direct conflicts for (grep {/^!/} @p) { @@ -383,6 +401,7 @@ next; } my $p = $q[0]; + next if $extractnative && extractnative($config, $r, $p, \@native); print "added $p because of $r (direct dep)\n" if $expand_dbg; push @todo_inst, $p; } @@ -404,6 +423,8 @@ } return (undef, @error) if @error; + push @native, '--directdepsend--' if $extractnative; + while (@todo || @todo_inst) { # install a set of chosen packages # ($aconficts must not be set for any of them) @@ -530,8 +551,9 @@ next; } if (@q == 1) { - push @todo_inst, $q[0]; + next if $extractnative && extractnative($config, $r, $q[0], \@native); print "added $q[0] because of $pp$r\n" if $expand_dbg; + push @todo_inst, $q[0]; next; } @@ -548,6 +570,7 @@ @q = @pq if @pq == 1; } if (@q == 1) { + next if $extractnative && extractnative($config, $r, $q[0], \@native); push @todo_inst, $q[0]; print "added $q[0] because of $pp$r\n" if $expand_dbg; next; @@ -579,6 +602,7 @@ } } if (@q == 1) { + next if $extractnative && extractnative($config, $r, $q[0], \@native); push @todo_inst, $q[0]; print "added $q[0] because of $pp$r\n" if $expand_dbg; next; @@ -594,6 +618,7 @@ print "recommended [@pq] among [@q]\n" if $expand_dbg; @q = @pq if @pq; if (@q == 1) { + next if $extractnative && extractnative($config, $r, $q[0], \@native); push @todo_inst, $q[0]; print "added $q[0] because of $pp$r\n" if $expand_dbg; next; @@ -617,6 +642,21 @@ return undef, @error if @error; } + if ($extractnative && @native) { + my %rdone; + for my $r (splice @native) { + next if $rdone{$r}++; + if ($r eq '--directdepsend--') { + push @native, $r; + next; + } + my @q = @{$whatprovides->{$r} || Build::addproviders($config, $r)}; + push @native, $r unless grep {$p{$_}} @q; + } + pop @native if @native && $native[-1] eq '--directdepsend--'; + push @$extractnative, @native; + } + return 1, (sort keys %p); } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/Build/Intrepo.pm new/obs-build-20220329/Build/Intrepo.pm --- old/obs-build-20220315/Build/Intrepo.pm 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/Build/Intrepo.pm 2022-03-29 10:52:43.000000000 +0200 @@ -111,6 +111,12 @@ $pkg->{'location'} = $loc if defined $loc; next; } + if ($tag eq 'M') { + chomp; + my $multiarch = (split(' ', $_, 2))[1]; + $pkg->{'multiarch'} = $multiarch if $multiarch; + next; + } my @ss; while (@s) { if ($nofiledeps && $s[0] =~ /^\//) { @@ -178,6 +184,7 @@ print $fh "O:$id".join(' ', @{$pkg->{'obsoletes'}})."\n" if $pkg->{'obsoletes'}; print $fh "r:$id".join(' ', @{$pkg->{'recommends'}})."\n" if $pkg->{'recommends'}; print $fh "s:$id".join(' ', @{$pkg->{'supplements'}})."\n" if $pkg->{'supplements'}; + print $fh "M:$id$pkg->{'multiarch'}\n" if $pkg->{'multiarch'}; print $fh "I:$id".getbuildid($pkg)."\n"; } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/Build.pm new/obs-build-20220329/Build.pm --- old/obs-build-20220315/Build.pm 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/Build.pm 2022-03-29 10:52:43.000000000 +0200 @@ -369,8 +369,6 @@ delete $config->{'save_expanded'}; $config->{'preinstall'} = []; $config->{'vminstall'} = []; - $config->{'cbpreinstall'} = []; - $config->{'cbinstall'} = []; $config->{'runscripts'} = []; $config->{'required'} = []; $config->{'support'} = []; @@ -737,6 +735,8 @@ # Delivers all packages which get used for the cross building sysroot sub get_sysroot { my ($config, $subpacks, @deps) = @_; + my @extractnative; + (@extractnative) = splice(@deps, 0, 2) if @deps > 1 && $deps[0] eq '--extractnative--' && ref($deps[1]); my @ndeps = grep {/^-/} @deps; my %ndeps = map {$_ => 1} @ndeps; my @directdepsend; @@ -757,7 +757,7 @@ @directdepsend = grep {!$ndeps{"-$_"}} @directdepsend; unshift @directdepsend, '--directdepsend--' if @directdepsend; } - @deps = expand($config, @deps, @ndeps, @directdepsend); + @deps = expand($config, @extractnative, @deps, @ndeps, @directdepsend); return @deps; } @@ -880,10 +880,6 @@ return @{$config->{'runscripts'}}; } -### just for API compability -sub get_cbpreinstalls { return (); } -sub get_cbinstalls { return (); } - ########################################################################### sub parse_depfile { @@ -911,6 +907,7 @@ my %pkgobsoletes; my %recommends; my %supplements; + my %multiarch; for my $pkgid (sort keys %$pkginfo) { my $pkg = $pkginfo->{$pkgid}; $provides{$pkgid} = $pkg->{'provides'} if $pkg->{'provides'}; @@ -919,6 +916,7 @@ $pkgobsoletes{$pkgid} = $pkg->{'obsoletes'} if $pkg->{'obsoletes'}; $recommends{$pkgid} = $pkg->{'recommends'} if $pkg->{'recommends'}; $supplements{$pkgid} = $pkg->{'supplements'} if $pkg->{'supplements'}; + $multiarch{$pkgid} = $pkg->{'multiarch'} if $pkg->{'multiarch'}; } $config->{'providesh'} = \%provides; $config->{'requiresh'} = \%requires; @@ -926,6 +924,7 @@ $config->{'pkgobsoletesh'} = \%pkgobsoletes; $config->{'recommendsh'} = \%recommends; $config->{'supplementsh'} = \%supplements; + $config->{'multiarchh'} = \%multiarch; makewhatprovidesh($config); } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/PBuild/Checker.pm new/obs-build-20220329/PBuild/Checker.pm --- old/obs-build-20220315/PBuild/Checker.pm 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/PBuild/Checker.pm 2022-03-29 10:52:43.000000000 +0200 @@ -395,7 +395,7 @@ my $hdeps; if ($ctx->{'bconf_host'} && !$p->{'native'}) { my $subpacks = $ctx->{'subpacks'}; - $hdeps = [ @{$p->{'dep_host'} || $p->{'dep'} || []} ]; + $hdeps = [ @{$p->{'dep_host'} || $p->{'dep'} || []}, @{$p->{'dep_native'} || []} ]; @$hdeps = Build::get_deps($ctx->{'bconf_host'}, $subpacks->{$p->{'name'}}, @$hdeps); if (!shift @$hdeps) { return ('unresolvable', 'host: '.join(', ', @$hdeps)); @@ -626,6 +626,7 @@ my $genbuildreqs = $p->{'genbuildreqs'}; my @bdeps = grep {!/^\// || $bconf->{'fileprovides'}->{$_}} @{$p->{'prereq'} || []}; unshift @bdeps, '--directdepsend--' if @bdeps; + unshift @bdeps, @{$p->{'dep_native'} || []}; unshift @bdeps, @{$genbuildreqs->[1]} if $genbuildreqs; if (!$kiwimode && $ctx->{'bconf_host'}) { unshift @bdeps, @{$p->{'dep_host'} || $p->{'dep'} || []}, @btdeps; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/PBuild/Expand.pm new/obs-build-20220329/PBuild/Expand.pm --- old/obs-build-20220315/PBuild/Expand.pm 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/PBuild/Expand.pm 2022-03-29 10:52:43.000000000 +0200 @@ -121,7 +121,9 @@ } my @edeps; if ($cross) { - @edeps = Build::get_sysroot($bconf, $subpacks->{$p->{'name'}}, @deps); + my @native; + @edeps = Build::get_sysroot($bconf, $subpacks->{$p->{'name'}}, '--extractnative--', \@native, @deps); + $p->{'dep_native'} = \@native; } else { @edeps = Build::get_deps($bconf, $subpacks->{$p->{'name'}}, @deps); } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/build new/obs-build-20220329/build --- old/obs-build-20220315/build 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/build 2022-03-29 10:52:43.000000000 +0200 @@ -1424,7 +1424,7 @@ set_build_arch -if test "$DO_INIT" = false -a -n "$RUN_SHELL"; then +if test "$DO_INIT" = false -a -n "$RUN_SHELL" -a -z "$VM_TYPE"; then mount_stuff BUILD_USER=root test -n "$NOROOTFORBUILD" && BUILD_USER=abuild diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/build-pkg-deb new/obs-build-20220329/build-pkg-deb --- old/obs-build-20220315/build-pkg-deb 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/build-pkg-deb 2022-03-29 10:52:43.000000000 +0200 @@ -180,6 +180,29 @@ fi } +pkg_sysrootinstall_deb() { + if test "x$1" = "x--prepare" ; then + assert_dir_path "$BUILD_SYSROOT" + chroot $BUILD_ROOT mkdir -p "$BUILD_SYSROOT" + local target=$(queryconfig target --dist "$BUILD_DIST" --configdir "$CONFIG_DIR" --archpath "$BUILD_ARCH") + if test -n "$target" ; then + local debarch=$(deb_chroot $BUILD_ROOT dpkg-architecture -q DEB_HOST_ARCH --host-type "$target") + if test -n "$debarch" ; then + echo "Adding architecture $debarch" + deb_chroot $BUILD_ROOT dpkg --add-architecture "$debarch" + fi + fi + return + fi + if test "x$1" = "x--finalize" ; then + return + fi + + ( deb_chroot $BUILD_ROOT dpkg --install $DEB_UNSAFE_IO --force-depends .init_b_cache/$PKG.deb 2>&1 || touch $BUILD_ROOT/exit ) | \ + perl -ne '$|=1;/^(Configuration file|Installing new config file|Selecting previously deselected|Selecting previously unselected|\(Reading database|Unpacking |Setting up|Creating config file|Preparing to replace dpkg|Preparing to unpack )/||/^$/||print' +} + + # Local Variables: # mode: Shell-script # End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/build-recipe-dsc new/obs-build-20220329/build-recipe-dsc --- old/obs-build-20220315/build-recipe-dsc 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/build-recipe-dsc 2022-03-29 10:52:43.000000000 +0200 @@ -158,8 +158,20 @@ DSC_BUILD_CMD="source $TOPDIR/SOURCES/build.script" chmod +x $buildroot/$TOPDIR/SOURCES/build.script fi + if test -z "$ABUILD_TARGET" ; then + ABUILD_TARGET=$(queryconfig target --dist "$BUILD_DIST" --configdir "$CONFIG_DIR" --archpath "$BUILD_ARCH" ) + test -z "$ABUILD_TARGET" || echo "build target is $ABUILD_TARGET" + fi + if test -n "$ABUILD_TARGET" ; then + DSC_BUILD_CMD="$DSC_BUILD_CMD --host-type $ABUILD_TARGET" + fi + if test -n "$ABUILD_TARGET" -a -d "$BUILD_ROOT/.build.sysroot" ; then + DSC_BUILD_CMD="$DSC_BUILD_CMD -Pcross,nocheck" + DSC_BUILD_OPTIONS="$DSC_BUILD_OPTIONS nocheck" + DSC_BUILD_OPTIONS="${DSC_BUILD_OPTIONS# }" + fi - chroot $buildroot su -c "export DEB_BUILD_OPTIONS=${DSC_BUILD_OPTIONS} ; cd $TOPDIR/BUILD && $DSC_BUILD_CMD" - $BUILD_USER < /dev/null && BUILD_SUCCEEDED=true + chroot $buildroot su -c "export DEB_BUILD_OPTIONS='${DSC_BUILD_OPTIONS}' ; cd $TOPDIR/BUILD && $DSC_BUILD_CMD" - $BUILD_USER < /dev/null && BUILD_SUCCEEDED=true if test "$BUILD_SUCCEEDED" = true -a "$DO_CHECKS" != "false" && ( chroot $buildroot su -c "which lintian > /dev/null" - $BUILD_USER < /dev/null ); then DEB_CHANGESFILE=${DEB_DSCFILE%.dsc}$OBS_DCH_RELEASE"_"$(chroot $buildroot su -c 'dpkg-architecture -qDEB_BUILD_ARCH')".changes" chroot $buildroot su -c "cd $TOPDIR && echo Running lintian && (set -x && lintian -i $TOPDIR/$DEB_CHANGESFILE)" - $BUILD_USER < /dev/null || BUILD_SUCCEEDED=false diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/build-vm new/obs-build-20220329/build-vm --- old/obs-build-20220315/build-vm 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/build-vm 2022-03-29 10:52:43.000000000 +0200 @@ -1198,13 +1198,13 @@ } vm_setup_network() { - if test -x /sbin/ip ; then + if test -x /sbin/ip ; then ip addr add 127.0.0.1/8 dev lo ip addr add ::1/128 dev lo ip link set lo up - else - ifconfig lo 127.0.0.1 up - ifconfig lo add ::1/128 + elif test -x /sbin/ifconfig ; then + ifconfig lo 127.0.0.1 up + ifconfig lo add ::1/128 fi . /.build/build.data if test -n "$VM_NETWORK"; then diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/call-podman new/obs-build-20220329/call-podman --- old/obs-build-20220315/call-podman 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/call-podman 2022-03-29 10:52:43.000000000 +0200 @@ -45,13 +45,13 @@ mount --make-rprivate / # create loopback interface - if test -x /sbin/ip ; then + if test -x /sbin/ip ; then ip addr add 127.0.0.1/8 dev lo ip addr add ::1/128 dev lo ip link set lo up - else - ifconfig lo 127.0.0.1 up - ifconfig lo add ::1/128 + elif test -x /sbin/ifconfig ; then + ifconfig lo 127.0.0.1 up + ifconfig lo add ::1/128 fi fi diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/configs/tumbleweed.conf new/obs-build-20220329/configs/tumbleweed.conf --- old/obs-build-20220315/configs/tumbleweed.conf 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/configs/tumbleweed.conf 2022-03-29 10:52:43.000000000 +0200 @@ -131,9 +131,7 @@ BuildFlags: useccache:bitcoin BuildFlags: useccache:ceph BuildFlags: useccache:chromium - BuildFlags: useccache:glib2 BuildFlags: useccache:gtk3 - BuildFlags: useccache:gtk3:doc BuildFlags: useccache:llvm9 BuildFlags: useccache:nodejs-electron buildflags: useccache:tensorflow @@ -145,8 +143,9 @@ buildflags: useccache:tensorflow:hpc-openmpi2 buildflags: useccache:tensorflow:lite buildflags: useccache:tensorflow:standard -# ccache 4.x breaks webkit2gtk3 -#BuildFlags: useccache:webkit2gtk3 + BuildFlags: useccache:webkit2gtk3:gtk3 + BuildFlags: useccache:webkit2gtk3:gtk3-soup2 + BuildFlags: useccache:webkit2gtk3:gtk4 %endif # switch to kiwi v8 @@ -164,10 +163,13 @@ Preinstall: liblua5_4-5 FileProvides: /bin/bash bash +FileProvides: /usr/bin/bash bash FileProvides: /bin/sh bash-sh busybox-sh +FileProvides: /usr/bin/sh bash-sh busybox-sh Prefer: bash-sh FileProvides: /bin/csh tcsh FileProvides: /bin/hostname hostname busybox-hostname +Prefer: -busybox-hostname FileProvides: /usr/bin/hostname hostname busybox-hostname FileProvides: /bin/logger util-linux-systemd FileProvides: /sbin/netconfig sysconfig-netconfig @@ -227,7 +229,15 @@ Prefer: libdb-4_8-devel VMinstall: util-linux libmount1 perl-base libdb-4_8 libblkid1 libuuid1 libsmartcols1 libcrypt1 VMinstall: kernel-obs-build -VMInstall: iproute2 libmnl0 +# iproute seems not to be used anymore nowadays; the builders have working localnet without it +# and on OBS we don't support 'network' access anyway, so the rest of the config is never reached +# 2022-03-23 - dimstar +# VMInstall: iproute2 libmnl0 + +# Add hostname so that OBS/build will have a chance to identify the hostname (instead of localhost) +# build has alternative ways to inject hostname nowadays - removed 2022-03-23 - dimstar +#Support: hostname +#Prefer: -busybox-hostname # Use the x86_64 kernel on i586 builds - boo#1178762 - Slow down in OBS since kernel 5.6.0 on 32bit ExportFilter: ^kernel-obs-build.*\.x86_64.rpm$ . i586 @@ -266,6 +276,34 @@ ExportFilter: ^novell-messenger-client.*\.i586.rpm$ . x86_64 ExportFilter: ^openCryptoki-32bit.*\.s390.rpm$ . s390x +############ +# For QEMU # +############ +# +# Firmwares are built (if possible) once per "port". This reduces build time, e.g., as compared +# to cross-compiling everything on everything, and improve consistency, while keeping things self +# contained, within ports, which is especially important for openSUSE:Factory +# +# ### x86 firmwares +# They are built on: x86_64 and aarch64. The x86_64 build can then be imported in i586, and the +# aarch64 one in armv7l. We're not yet able to build them on any PPC arch (but are working on it) +# so, for this devel project, we're exporting them there too (and for Factory, we have an aggregate). +# We're also not able to build them on zsystem and riscv, so export them there as well, here in the +# devel project (for Factory, we just miss them in s390, while riscv is special in its own way). +ExportFilter: ^qemu-ipxe.*\.noarch\.rpm$ . i586 armv7l ppc ppc64 ppc64le s390x riscv64 +ExportFilter: ^qemu-seabios.*\.noarch\.rpm$ . i586 armv7l ppc ppc64 ppc64le s390x riscv64 +ExportFilter: ^qemu-vgabios.*\.noarch\.rpm$ . i586 armv7l ppc ppc64 ppc64le s390x riscv64 +ExportFilter: ^qemu-sgabios.*\.noarch\.rpm$ . i586 armv7l ppc ppc64 ppc64le s390x riscv64 +# ### PPC firmwares +# They are built on: x86_64, aarch64 and ppc64le. The x86_build can then by imported in i586, the +# aarch64 one in armv7l and the ppc64le one in ppc and ppc64. As for the x86 firmwares, here in the +# devel project, we export them directly to all the arch-es that can't build them, just for convenience. +ExportFilter: ^qemu-skiboot.*\.noarch\.rpm$ . i586 armv7l ppc s390x riscv64 +ExportFilter: ^qemu-SLOF.*\.noarch\.rpm$ . i586 armv7l ppc s390x riscv64 +# TODO: does the 'qemu-edk2' package still exist? +ExportFilter: ^qemu-edk2.*\.noarch\.rpm$ . i586 armv7l aarch64 ppc ppc64 ppc64le s390x riscv64 +ExportFilter: ^qemu-microvm.*\.noarch\.rpm$ . i586 armv7l aarch64 ppc ppc64 ppc64le s390x riscv64 + Required: rpm-build # Build all packages with -pie enabled Required: gcc-PIE @@ -277,9 +315,6 @@ Support: brp-check-suse Support: post-build-checks -# Add hostname so that OBS/build will have a chance to identify the hostname (instead of localhost) -Support: hostname -Prefer: -busybox-hostname # remove build-compare support to disable "same result" package dropping Support: build-compare @@ -343,7 +378,7 @@ Prefer: krb5-mini krb5-mini-devel Prefer: krb5-mini-devel:krb5-mini Prefer: libdebuginfod1 debuginfod-client -Prefer: libudev-mini-devel libudev-mini1 udev-debuginfo libudev1-debuginfo +Prefer: libudev-mini1 udev-debuginfo libudev1-debuginfo Prefer: libuna-mini-devel libuna1-mini Prefer: libunbound-devel-mini Prefer: tomcat:log4j12 @@ -368,6 +403,7 @@ Ignore: postgresql13-devel-mini:this-is-only-for-build-envs Ignore: postgresql14-devel-mini:this-is-only-for-build-envs Ignore: systemd-mini:this-is-only-for-build-envs +Ignore: systemd-mini-container:this-is-only-for-build-envs Ignore: udev-mini:this-is-only-for-build-envs # Ring0 packages should not pull in 'info' - making the base VM smaller @@ -427,10 +463,13 @@ Prefer: spamassassin:curl # Python3 exists in multiple versions - we currently favor 3.8 (our default): -Prefer: -python36 -python39 +Prefer: -python39 Prefer: -python39-hotdoc Prefer: -python39-txt2tags -python310-txt2tags +# have choice for python3-magic: python38-magic python38-python-magic +Prefer: -python38-magic -python39-magic -python310-magic + # have choice for (python36-qt5 or python36-PyQt6) needed by python36-pytest-qt Prefer: -python39-PyQt6 -python38-PyQt6 -python3-pyside2 # man and mandoc provide man; mandoc claims to be lightweight, but it was never discussed to be the new default @@ -439,6 +478,9 @@ # go exists in mutliple versions by now - we prefer the 'unversioned package' Prefer: go -go1.13 +# have choice for kernel >= 4.1.0 needed by libbcc0: kernel-debug kernel-default kernel-default-base kernel-kvmsmall kernel-vanilla +Prefer: kernel-default-base + # have choice for kubernetes-kubelet-common (de-prefer the old versions, ensuring to have a new unresolvable when a new version shows up) Prefer: -kubernetes1.18-kubelet-common -kubernetes1.19-kubelet-common -kubernetes1.20-kubelet-common -kubernetes1.21-kubelet-common -kubernetes1.22-kubelet-common @@ -449,9 +491,8 @@ Prefer: -budgie-desktop # python-tornado exists in multiple versions, the meta-package python-tornado defines the system default -Prefer: -python36-tornado5 -Prefer: python38-tornado -python38-tornado5 -Prefer: python39-tornado -python39-tornado5 +Prefer: python38-tornado +Prefer: python39-tornado Prefer: python310-tornado # There are multiple PK backends available. Favor the openSUSE own zypp backend @@ -496,7 +537,7 @@ # azure-cli reports: have choice for python3-vsts needed by python3-azure-functions-devops-build: python3-azure-devops python3-vsts # Use the real package name -Prefer: python36-vsts python38-vsts python39-vsts +Prefer: python38-vsts python39-vsts # have choice for (sysvinit(network) or service(network)) needed by sysconfig: NetworkManager wicked-service Prefer: -NetworkManager @@ -727,7 +768,6 @@ Prefer: -liblbxutil-devel-32bit Prefer: -liblcms2-devel-32bit Prefer: -libmount-devel-32bit -Prefer: -libnetapi-devel-32bit Prefer: -libnettle-devel-32bit Prefer: -libnl3-devel-32bit Prefer: -libnotify-devel-32bit @@ -780,7 +820,6 @@ Prefer: -libstdc++-devel-32bit Prefer: -libtasn1-devel-32bit Prefer: -libtiff-devel-32bit -Prefer: -libudev-devel-32bit Prefer: -libunistring-devel-32bit Prefer: -libusb-1_0-devel-32bit Prefer: -libuuid-devel-32bit @@ -802,7 +841,6 @@ Prefer: -libxml2-devel-32bit Prefer: -libxslt-devel-32bit Prefer: -libyajl-devel-32bit -Prefer: -libyaz-devel-32bit Prefer: -libzstd-devel-32bit Prefer: -llvm10-LTO-devel-32bit Prefer: -llvm10-devel-32bit @@ -862,14 +900,7 @@ Prefer: -zziplib-devel-32bit # Ruby stuff - quite a few packages exist in multiple versions in the distro; in each case, the Preference is on the 'unversioned' package -Prefer: ruby2.7-rubygem-fast_gettext ruby3.1-rubygem-fast_gettext -Prefer: ruby2.7-rubygem-i18n -Prefer: ruby2.7-rubygem-rack -Prefer: ruby2.7-rubygem-sass-rails -Prefer: ruby2.7-rubygem-sassc -Prefer: ruby2.7-rubygem-thor -Prefer: ruby2.7-rubygem-listen ruby2.7-rubygem-mime-types ruby2.7-rubygem-builder -Prefer: -ruby2.7-rubygem-puma-4 +Prefer: ruby3.1-rubygem-fast_gettext # We have opencv and opencv3 - as usual, the unversioned one should win Prefer: opencv-devel @@ -908,7 +939,7 @@ Prefer: poppler-tools Prefer: libjpeg8-devel libjpeg-turbo Prefer: microcode_ctl:kernel-default -Prefer: gnu-jaf yast2-control-center-qt +Prefer: yast2-control-center-qt Prefer: wine Prefer: ndesk-dbus ndesk-dbus-glib tomcat-jsp-2_3-api Prefer: -servletapi4 -servletapi5 @@ -920,8 +951,6 @@ Prefer: -geronimo-jta-1_0_1B-api -geronimo-jms-1_1-api -geronimo-el-1_0-api -geronimo-jta-1_1-api javamail Prefer: rhino:xmlbeans-mini -Prefer: mx4j:log4j12-mini -Prefer: maven-doxia-module-fo:log4j12-mini Prefer: rpcbind Prefer: wicked-service @@ -1359,7 +1388,7 @@ Prefer: %{rb_default_ruby_suffix}-rubygem-mini_portile2 Prefer: %{rb_default_ruby_suffix}-rubygem-ronn Prefer: %{rb_default_ruby_suffix}-rubygem-rspec -Prefer: -ruby3.0-rubygem-rspec-3_5 -ruby2.7-rubygem-rspec-3_5 -ruby3.1-rubygem-rspec-3_5 +Prefer: -ruby3.1-rubygem-rspec-3_5 Prefer: %{rb_default_ruby_suffix}-rubygem-ruby-dbus Prefer: %{rb_default_ruby_suffix}-rubygem-sass Prefer: %{rb_default_ruby_suffix}-rubygem-sass-rails diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/dist/build.changes new/obs-build-20220329/dist/build.changes --- old/obs-build-20220315/dist/build.changes 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/dist/build.changes 2022-03-29 10:52:43.000000000 +0200 @@ -1,4 +1,13 @@ ------------------------------------------------------------------- +Tue Mar 29 08:46:07 UTC 2022 - Adrian Schr��ter <adrian(a)suse.de> + +- docker: Add support for --root and --installroot global zypper options +- debian cross build support via multi-arch (obsoleting cbinstall remnants) +- Tumbleweed config synced +- documentation updates +- smaller bugfixes + +------------------------------------------------------------------- Tue Mar 15 15:55:55 UTC 2022 - Adrian Schr��ter <adrian(a)suse.de> - regression fix from last release, avoid calling shutdown handler diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/docs/build_config.adoc new/obs-build-20220329/docs/build_config.adoc --- old/obs-build-20220315/docs/build_config.adoc 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/docs/build_config.adoc 2022-03-29 10:52:43.000000000 +0200 @@ -66,40 +66,40 @@ following values for FLAG are usable. All flags with a leading colon (:) require an additional parameter directly following them. -* vmfstype: +* vmfstype:TYPE Defines a specific file system when building inside of a VM. Possible values are ext2, ext3, ext4, btrfs, xfs, reiserfs (v3). -* vmfsoptions: +* vmfsoptions:OPTIONS There is also an option to disable directory indexing for ext2, ext3, and ext4 file systems. This makes file ordering inside of directories reproducible but may have a negative performance impact. To apply this, specify vmfsoptions:nodirindex -* kiwiprofile: +* kiwiprofile:PROFILE builds the selected profile in &kiwi; appliance builds. -* logidlelimit: +* logidlelimit:SECONDS Build jobs which don��t create any output get aborted after some time. This flag can be used to modify the limit. Specify the seconds behind flag. -* excludebuild: +* excludebuild:PACKAGE Exclude a package from building. _multibuild flavors can be specified via package:flavor syntax. -* onlybuild: +* onlybuild:PACKAGE DANGER: this may remove many build results when introduced the first time! It can be used to maintain a whitelist of packages to be built. All other packages will turn to excluded state. -* useccache: +* useccache:PACKAGE Configure usage of ccache when building packages that match the value of this parameter. The ccache package will automatically be installed and @@ -117,7 +117,15 @@ order they are configured in the meta configuration, starting from the top. -* ccachetype: +An alternative way to enable caching based on build dependencies is to +add "--enable-cache" as dependency, for example via a Substitute rule: + + Substitute: gcc-c++ gcc-c++ --enable-ccache + +This will always enable ccache when a direct build depdency to gcc-c++ +is required. + +* ccachetype:TYPE Defines the ccache implementation, possible values are: ccache, sccache @@ -349,6 +357,11 @@ Defines the target architecture. This can be used to build for i686 on i586 schedulers for example. +==== Target: GNU_TRIPLET (DEB only) + +Defines the target architecture via a gnu triplet (not the debian +architecture!). For example arm-linux-gnueabihf for armv7hl builds. + ==== Type: TYPE Build recipe type. This is the format of the file which provides the diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/docs/pbuild.adoc new/obs-build-20220329/docs/pbuild.adoc --- old/obs-build-20220315/docs/pbuild.adoc 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/docs/pbuild.adoc 2022-03-29 10:52:43.000000000 +0200 @@ -128,71 +128,8 @@ (eg. gdb, strace, valgrind or assumed missing dependencies for testing). -=== Remote Assets -Remote Assets can be defined inside of the build descriptions. They are resources from a remote -servers and will be downloaded and validated by pbuild before the corresponding build is started. - -Supported protocols for resources using an url are: - - * http - * https - * git+http - * git+https - -This depends on the build description format as described below. - -==== rpm spec files - -Source lines in spec files can declare remote assets. Rpm is already supporting to use -an URL as source definition. A comment before such a line marks it as remote asset for pbuild: - - #!RemoteAsset - Source: <URL> - -It is also possible to specify a checksum to make sure that the asset is correct. - - #!RemoteAsset: <CHECKSUM> - Source: <URL> - -An alternative is just to use the - - #!RemoteAssetUrl: <URL> - -marker without any Source: tag when the downloaded file should not become -part of the source rpm. - -==== kiwi build description - -The kiwi format is not supporting remote source specifications, but they can be -specified via XML comments. - -  - -The resulting downloaded file can be copied into the image using - -  - -The kiwi profile name is added to container names by default. This can be -disabled via - -  - -==== Dockerfile description - -Has no support for assets yet. - -==== Arch Linux PKGBUILD - -PKGBuild files already contain the needed URLs and Checksums, so no extra -treatment is needed. - -==== FedPkg "sources" file - -The sources file contains a list of file names with checksums. PBuild will -automatically download the missing files from a FedPkg Server that needs -to be configured in the project config via the "AssetsURL:" directive or set -with the "--assets" option. +include::source_assets.adoc[] include::build_config.adoc[] diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/docs/pbuild.html new/obs-build-20220329/docs/pbuild.html --- old/obs-build-20220315/docs/pbuild.html 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/docs/pbuild.html 2022-03-29 10:52:43.000000000 +0200 @@ -1112,7 +1112,7 @@ <div class="ulist"><ul> <li> <p> -vmfstype: +vmfstype:TYPE </p> </li> </ul></div> @@ -1121,7 +1121,7 @@ <div class="ulist"><ul> <li> <p> -vmfsoptions: +vmfsoptions:OPTIONS </p> </li> </ul></div> @@ -1132,7 +1132,7 @@ <div class="ulist"><ul> <li> <p> -kiwiprofile: +kiwiprofile:PROFILE </p> </li> </ul></div> @@ -1140,7 +1140,7 @@ <div class="ulist"><ul> <li> <p> -logidlelimit: +logidlelimit:SECONDS </p> </li> </ul></div> @@ -1150,7 +1150,7 @@ <div class="ulist"><ul> <li> <p> -excludebuild: +excludebuild:PACKAGE </p> </li> </ul></div> @@ -1159,7 +1159,7 @@ <div class="ulist"><ul> <li> <p> -onlybuild: +onlybuild:PACKAGE </p> </li> </ul></div> @@ -1169,7 +1169,7 @@ <div class="ulist"><ul> <li> <p> -useccache: +useccache:PACKAGE </p> </li> </ul></div> @@ -1187,10 +1187,18 @@ that package will be used. The repositories will be searched in the order they are configured in the meta configuration, starting from the top.</p></div> +<div class="paragraph"><p>An alternative way to enable caching based on build dependencies is to +add "--enable-cache" as dependency, for example via a Substitute rule:</p></div> +<div class="literalblock"> +<div class="content"> +<pre><code>Substitute: gcc-c++ gcc-c++ --enable-ccache</code></pre> +</div></div> +<div class="paragraph"><p>This will always enable ccache when a direct build depdency to gcc-c++ +is required.</p></div> <div class="ulist"><ul> <li> <p> -ccachetype: +ccachetype:TYPE </p> </li> </ul></div> @@ -1475,7 +1483,12 @@ i586 schedulers for example.</p></div> </div> <div class="sect3"> -<h4 id="_type_type">3.1.27. Type: TYPE</h4> +<h4 id="_target_gnu_triplet_deb_only">3.1.27. Target: GNU_TRIPLET (DEB only)</h4> +<div class="paragraph"><p>Defines the target architecture via a gnu triplet (not the debian +architecture!). For example arm-linux-gnueabihf for armv7hl builds.</p></div> +</div> +<div class="sect3"> +<h4 id="_type_type">3.1.28. Type: TYPE</h4> <div class="paragraph"><p>Build recipe type. This is the format of the file which provides the build description. This gets usually autodetected, but in some rare cases it can be set here to either one of these: spec, dsc, kiwi, @@ -1485,7 +1498,7 @@ type from the binary type.</p></div> </div> <div class="sect3"> -<h4 id="_vminstall_packages">3.1.28. VMInstall: PACKAGES</h4> +<h4 id="_vminstall_packages">3.1.29. VMInstall: PACKAGES</h4> <div class="paragraph"><p>Like Preinstall, but these packages get only installed when a virtual machine like Xen or KVM is used for building. Usually packages like mount are listed here.</p></div> @@ -1651,7 +1664,7 @@ <div id="footer"> <div id="footer-text"> Last updated - 2022-03-07 10:46:30 CET + 2022-03-24 09:17:43 CET </div> </div> </body> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/docs/source_assets.adoc new/obs-build-20220329/docs/source_assets.adoc --- old/obs-build-20220315/docs/source_assets.adoc 1970-01-01 01:00:00.000000000 +0100 +++ new/obs-build-20220329/docs/source_assets.adoc 2022-03-29 10:52:43.000000000 +0200 @@ -0,0 +1,65 @@ +=== Remote Assets + +Remote Assets can be defined inside of the build descriptions. They are resources from a remote +servers and will be downloaded and validated by pbuild before the corresponding build is started. + +Supported protocols for resources using an url are: + + * http + * https + * git+http + * git+https + +This depends on the build description format as described below. + +==== rpm spec files + +Source lines in spec files can declare remote assets. Rpm is already supporting to use +an URL as source definition. A comment before such a line marks it as remote asset for pbuild: + + #!RemoteAsset + Source: <URL> + +It is also possible to specify a checksum to make sure that the asset is correct. + + #!RemoteAsset: <CHECKSUM> + Source: <URL> + +An alternative is just to use the + + #!RemoteAssetUrl: <URL> + +marker without any Source: tag when the downloaded file should not become +part of the source rpm. + +==== kiwi build description + +The kiwi format is not supporting remote source specifications, but they can be +specified via XML comments. + +  + +The resulting downloaded file can be copied into the image using + +  + +The kiwi profile name is added to container names by default. This can be +disabled via + +  + +==== Dockerfile description + +Has no support for assets yet. + +==== Arch Linux PKGBUILD + +PKGBuild files already contain the needed URLs and Checksums, so no extra +treatment is needed. + +==== FedPkg "sources" file + +The sources file contains a list of file names with checksums. PBuild will +automatically download the missing files from a FedPkg Server that needs +to be configured in the project config via the "AssetsURL:" directive or set +with the "--assets" option. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/init_buildsystem new/obs-build-20220329/init_buildsystem --- old/obs-build-20220315/init_buildsystem 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/init_buildsystem 2022-03-29 10:52:43.000000000 +0200 @@ -671,7 +671,6 @@ while read PKG SRC ; do test "$PKG" = "preinstall:" && continue test "$PKG" = "runscripts:" && continue - test "$PKG" = "cbpreinstall:" && continue test "$PKG" = "vminstall:" && continue test "$PKG" = "dist:" && continue test "$PKG" = "rpmid:" && continue diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/obs-docker-support new/obs-build-20220329/obs-docker-support --- old/obs-build-20220315/obs-docker-support 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/obs-docker-support 2022-03-29 10:52:43.000000000 +0200 @@ -1,4 +1,4 @@ -#!/bin/bash +#!/bin/sh ################################################################ # # Enable docker build support in container. @@ -30,11 +30,17 @@ DATA_DIR= zypper() { - cmd= + local cmd # try to find the command - globalopts=() + local globalopts + typeset -a globalopts while test -n "$1"; do case $1 in + -R|--root|--installroot) + globalopts[${#globalopts[@]}]="$1" + globalopts[${#globalopts[@]}]="$2" + shift 2 + ;; -*) globalopts[${#globalopts[@]}]="$1" shift @@ -87,9 +93,10 @@ } apt_get() { - cmd= + local cmd # try to find the command - globalopts=() + local globalopts + typeset -a globalopts while test -n "$1"; do case $1 in -*) @@ -121,7 +128,8 @@ dnf() { # try to find command - globalopts=() + local globalopts + typeset -a globalopts while test -n "$1"; do case $1 in -*) @@ -150,7 +158,8 @@ yum() { # try to find command - globalopts=() + global globalopts + typeset -a globalopts while test -n "$1"; do case $1 in -*) @@ -178,7 +187,8 @@ } curl() { - local cmd=() + local cmd + typeset -a cmd local oopt local oname while test -n "$1" ; do diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/obs-build-20220315/startdockerd new/obs-build-20220329/startdockerd --- old/obs-build-20220315/startdockerd 2022-03-15 16:56:55.000000000 +0100 +++ new/obs-build-20220329/startdockerd 2022-03-29 10:52:43.000000000 +0200 @@ -118,11 +118,11 @@ mount --make-rprivate / # create loopback interface - if test -x /sbin/ip ; then + if test -x /sbin/ip ; then ip addr add 127.0.0.1/8 dev lo ip addr add ::1/128 dev lo ip link set lo up - else + elif test -x /sbin/ifconfig ; then ifconfig lo 127.0.0.1 up ifconfig lo add ::1/128 fi

1 0

commit plasma5-sdk for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package plasma5-sdk for openSUSE:Factory checked in at 2022-04-01 21:35:27 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/plasma5-sdk (Old) and /work/SRC/openSUSE:Factory/.plasma5-sdk.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "plasma5-sdk" Fri Apr 1 21:35:27 2022 rev:122 rq:965926 version:5.24.4 Changes: -------- --- /work/SRC/openSUSE:Factory/plasma5-sdk/plasma5-sdk.changes 2022-03-12 17:15:55.138336277 +0100 +++ /work/SRC/openSUSE:Factory/.plasma5-sdk.new.1900/plasma5-sdk.changes 2022-04-01 21:36:15.753394016 +0200 @@ -1,0 +2,9 @@ +Tue Mar 29 16:04:40 UTC 2022 - Fabian Vogt <fabian(a)ritter-vogt.de> + +- Update to 5.24.4 + * New bugfix release + * For more details please see: + * https://kde.org/announcements/plasma/5/5.24.4 +- No code changes since 5.24.3 + +------------------------------------------------------------------- Old: ---- plasma-sdk-5.24.3.tar.xz plasma-sdk-5.24.3.tar.xz.sig New: ---- plasma-sdk-5.24.4.tar.xz plasma-sdk-5.24.4.tar.xz.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ plasma5-sdk.spec ++++++ --- /var/tmp/diff_new_pack.3TsEru/_old 2022-04-01 21:36:16.329387698 +0200 +++ /var/tmp/diff_new_pack.3TsEru/_new 2022-04-01 21:36:16.333387654 +0200 @@ -18,7 +18,7 @@ %bcond_without released Name: plasma5-sdk -Version: 5.24.3 +Version: 5.24.4 Release: 0 Summary: Plasma SDK License: GPL-2.0-only AND LGPL-2.0-or-later ++++++ plasma-sdk-5.24.3.tar.xz -> plasma-sdk-5.24.4.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/CMakeLists.txt new/plasma-sdk-5.24.4/CMakeLists.txt --- old/plasma-sdk-5.24.3/CMakeLists.txt 2022-03-08 12:31:35.000000000 +0100 +++ new/plasma-sdk-5.24.4/CMakeLists.txt 2022-03-29 13:32:54.000000000 +0200 @@ -1,7 +1,7 @@ cmake_minimum_required(VERSION 3.16) project(plasma-sdk) -set(PROJECT_VERSION "5.24.3") +set(PROJECT_VERSION "5.24.4") set(PROJECT_VERSION_MAJOR 5) set(QT_MIN_VERSION "5.15.0") diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/cuttlefish/org.kde.cuttlefish.appdata.xml new/plasma-sdk-5.24.4/cuttlefish/org.kde.cuttlefish.appdata.xml --- old/plasma-sdk-5.24.3/cuttlefish/org.kde.cuttlefish.appdata.xml 2022-03-08 12:31:06.000000000 +0100 +++ new/plasma-sdk-5.24.4/cuttlefish/org.kde.cuttlefish.appdata.xml 2022-03-29 13:32:27.000000000 +0200 @@ -96,7 +96,7 @@ <p xml:lang="ast">Cuttlefish permite a los artistes y los desendolcadores previsualizar y escoyer iconos. L'aplicaci��n tenta de renderizar los iconos exautamente como se ver��en dibuxaes na aplicaci��n. Permite pe��erar seg��n la estaya y el nome. Cuttlefish nun ye una ferramienta pa usuarios, sin��n enfocada a artistes y desendolcadores. Tami��n apurre un plugin pa Kate y KDevelop pa usase como seleutor d'iconos.</p> <p xml:lang="az">Cuttlefish dizaynerl��r�� v�� t��rtibat��lara ikonlara baxmaq v�� onlar�� se��m��k al��tidir. Cuttlefish ikonlar��n m��hz t��tbiql��rd�� nec�� g��r��n��c��yini g��st��rir. Kateqoriya v�� adlar��na g��r�� e��idl��m��y�� imkan verir. Cuttlefish universal bir al��t deyil, bel�� ki, o dizaynerl��r v�� t��rtibat��lar ��n n��z��rd�� tutulub. Cuttlefish h��m��inin ikonlar�� se��m�� vasit��si kimi istifad�� olunacaq Kate v�� KDevelop t��tbiql��ri ��n ��lav��l��r t��qdim edir.</p> <p xml:lang="ca">El Cuttlefish permet als artistes i als desenvolupadors previsualitzar i seleccionar icones. El Cuttlefish intenta representar les icones exactament com es dibuixaran a l'aplicaci��. Permet filtrar segons la categoria i el nom. El Cuttlefish no ��s una eina d'utilitat general, sin�� destinada als casos d'��s d'artistes i desenvolupadors. El Cuttlefish tamb�� proporciona un connector per al Kate i el KDevelop per a ser utilitat com a selector d'icones.</p> - <p xml:lang="ca-valencia">El Cuttlefish permet als artistes i als desenvolupadors previsualitzar i seleccionar icones. El Cuttlefish intenta representar les icones exactament com es dibuixaran a l'aplicaci��. Permet filtrar segons la categoria i el nom. El Cuttlefish no ��s una eina d'utilitat general, sin�� destinada als casos d'��s d'artistes i desenvolupadors. El Cuttlefish tamb�� proporciona un connector per al Kate i el KDevelop per a ser utilitat com a selector d'icones.</p> + <p xml:lang="ca-valencia">El Cuttlefish permet als artistes i als desenvolupadors previsualitzar i seleccionar icones. El Cuttlefish intenta representar les icones exactament com es dibuixaran a l'aplicaci��. Permet filtrar segons la categoria i el nom. El Cuttlefish no ��s una eina d'utilitat general, sin�� destinada als casos d'��s d'artistes i desenvolupadors. El Cuttlefish tamb�� proporciona un connector per a Kate i KDevelop per a ser utilitat com a selector d'icones.</p> <p xml:lang="da">Cuttlefish lader kunstnere og udviklere forh��ndsvise og v��lge ikoner. Cuttlefish fors��ger at rendere ikoner n��jagtig som de ville blive tegnet i programmet. Det muligg��re filtrering baseret p�� kategori og navn. Cuttlefish er ikke et generelt v��rkt��j, men rettet imod kunstneres og udvikleres brugsm��nstre. Cuttlefish leverer ogs�� et plugin til Kate og KDevelop til at blive brugt som ikonv��lger.</p> <p xml:lang="de">Mit Cuttlefish k��nnen Designer und Entwickler eine Vorschau f��r Symbole anzeigen und Symbole ausw��hlen. Die Symbole werden genauso gerendert wie sie in der Anwendung angezeigt werden. Symbole k��nnen nach Kategorie und Name gefiltert werden. Cuttlefish ist kein universelles Grafikprogramm. sondern f��r die Anwendungsf��lle von Designer und Entwicklern gedacht. Cuttlefish stellt Module f��r Kate und KDevelop bereit, die zur Auswahl von Symbolen verwendet werden k��nnen.</p> <p xml:lang="el">�� Cuttlefish �� . �� Cuttlefish �� . �� . �� Cuttlefish �� , �� . �� Cuttlefish �� Kate �� KDevelop �� .</p> @@ -141,9 +141,9 @@ </screenshots> <project_group>KDE</project_group> <releases> + <release version="5.24.4" date="2022-03-29"/> <release version="5.24.3" date="2022-03-08"/> <release version="5.24.2" date="2022-02-22"/> <release version="5.24.1" date="2022-02-15"/> - <release version="5.23.5" date="2022-01-04"/> </releases> </component> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/cuttlefish/org.kde.cuttlefish.desktop new/plasma-sdk-5.24.4/cuttlefish/org.kde.cuttlefish.desktop --- old/plasma-sdk-5.24.3/cuttlefish/org.kde.cuttlefish.desktop 2022-03-08 12:31:06.000000000 +0100 +++ new/plasma-sdk-5.24.4/cuttlefish/org.kde.cuttlefish.desktop 2022-03-29 13:32:27.000000000 +0200 @@ -123,6 +123,7 @@ Keywords[az]=dizayn;ni��an;��nbax��;simvol; Keywords[ca]=disseny;icona;vista pr��via;previsualitzaci��;s��mbol; Keywords[ca@valencia]=disseny;icona;vista pr��via;previsualitzaci��;s��mbol; +Keywords[de]=Vorschau Keywords[en_GB]=design;icon;preview;symbol; Keywords[es]=dise��o;icono;vista previa;previsualizar;s��mbolo; Keywords[fi]=suunnittelu;kuvake;esikatselu;symboli; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/engineexplorer/org.kde.plasmaengineexplorer.appdata.xml new/plasma-sdk-5.24.4/engineexplorer/org.kde.plasmaengineexplorer.appdata.xml --- old/plasma-sdk-5.24.3/engineexplorer/org.kde.plasmaengineexplorer.appdata.xml 2022-03-08 12:31:06.000000000 +0100 +++ new/plasma-sdk-5.24.4/engineexplorer/org.kde.plasmaengineexplorer.appdata.xml 2022-03-29 13:32:27.000000000 +0200 @@ -7,7 +7,7 @@ <name>Plasma Engine Explorer</name> <name xml:lang="az">Plasma Mexanizmi B��l��d��isi</name> <name xml:lang="ca">Explorador de motors del Plasma</name> - <name xml:lang="ca-valencia">Explorador de motors del Plasma</name> + <name xml:lang="ca-valencia">Explorador de motors de Plasma</name> <name xml:lang="cs">Pr��zkumn��k zdroj�� Plasma</name> <name xml:lang="da">Udforsk Plasma-motorer</name> <name xml:lang="de">Plasma-Datenquellen</name> @@ -42,7 +42,7 @@ <summary>Explorer for the data published by Plasma Data Engines</summary> <summary xml:lang="az">Plasma M��lumat Mexanizml��ri t��r��find��n yay��mlanan m��lumatlara bax��</summary> <summary xml:lang="ca">Explorador de les dades publicades pels motors de dades del Plasma</summary> - <summary xml:lang="ca-valencia">Explorador de les dades publicades pels motors de dades del Plasma</summary> + <summary xml:lang="ca-valencia">Explorador de les dades publicades pels motors de dades de Plasma</summary> <summary xml:lang="da">Udforsk de data der offentligg��res af Plasma datamotorer</summary> <summary xml:lang="de">Anzeige von Daten, die von Plasma-Datenquellen ver��ffentlicht werden.</summary> <summary xml:lang="el">�� Plasma</summary> @@ -77,7 +77,7 @@ <p>Plasma Engine Explorer is a graphical tool allowing developers to test Plasma DataEngines without writing a Plasma applet.</p> <p xml:lang="az">Plasmoidl��r�� bax�� vasit��si, t��rtibat��lara Plasma ��lav��l��rini yenid��n yazmadan onlar��n test olunmas��na imkan ver��n qrafik al��tidir.</p> <p xml:lang="ca">L'explorador de motors del Plasma ��s una eina gr��fica que permet als desenvolupadors provar els motors de dades del Plasma sense escriure una miniaplicaci�� del Plasma.</p> - <p xml:lang="ca-valencia">L'explorador de motors del Plasma ��s una eina gr��fica que permet als desenvolupadors provar els motors de dades del Plasma sense escriure una miniaplicaci�� del Plasma.</p> + <p xml:lang="ca-valencia">L'explorador de motors de Plasma ��s una eina gr��fica que permet als desenvolupadors provar els motors de dades de Plasma sense escriure una miniaplicaci�� de Plasma.</p> <p xml:lang="cs">Pr��zkumn��k zdroj�� Plasma je grafick�� n��stroj umo��uj��c�� v��voj��m testovat datov�� stroje Plasma bez psan�� aplet��.</p> <p xml:lang="da">Plasma Engine Explorer er et grafisk v��rkt��j s�� udviklere kan teste Plasma datamotorer uden at skrive en Plasma-applet.</p> <p xml:lang="de">Dies ist eine grafische Benutzeroberfl��che, mit der Entwickler Plasma-Datenquellen testen k��nnen, ohne ein Plasma-Miniprogramm zu schreiben.</p> @@ -117,10 +117,10 @@ <binary>plasmaengineexplorer</binary> </provides> <releases> + <release version="5.24.4" date="2022-03-29"/> <release version="5.24.3" date="2022-03-08"/> <release version="5.24.2" date="2022-02-22"/> <release version="5.24.1" date="2022-02-15"/> - <release version="5.23.5" date="2022-01-04"/> </releases> <screenshots> <screenshot type="default"> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/engineexplorer/org.kde.plasmaengineexplorer.desktop new/plasma-sdk-5.24.4/engineexplorer/org.kde.plasmaengineexplorer.desktop --- old/plasma-sdk-5.24.3/engineexplorer/org.kde.plasmaengineexplorer.desktop 2022-03-08 12:31:06.000000000 +0100 +++ new/plasma-sdk-5.24.4/engineexplorer/org.kde.plasmaengineexplorer.desktop 2022-03-29 13:32:27.000000000 +0200 @@ -4,7 +4,7 @@ Name[ast]=Esplorador de motores de Plasma Name[az]=Plasma Mexanizmi B��l��d��isi Name[ca]=Explorador de motors del Plasma -Name[ca@valencia]=Explorador de motors del Plasma +Name[ca@valencia]=Explorador de motors de Plasma Name[da]=Plasma Engine Explorer Name[de]=Plasma-Datenquellen-Betrachter Name[el]=�� Plasma @@ -39,7 +39,7 @@ GenericName[ast]=Ferramienta de visualizaci��n de los motores de datos de Plasma GenericName[az]=M��lumat Mexanizml��rin�� bax�� al��ti GenericName[ca]=Eina de visualitzaci�� dels motors de dades del Plasma -GenericName[ca@valencia]=Eina de visualitzaci�� dels motors de dades del Plasma +GenericName[ca@valencia]=Eina de visualitzaci�� dels motors de dades de Plasma GenericName[da]=Visningsv��rkt��j til Plasma datamotorer GenericName[de]=Anzeige von Plasma-Datenquellen GenericName[el]=�� Plasma @@ -74,7 +74,7 @@ Comment[ast]=Esplorador pa los datos espublizaos polos motores de datos de Plasma Comment[az]=Yay��nlanan Plasma Mexanizml��ri m��lumatlar��na bax�� Comment[ca]=Explorador de les dades publicades pels motors de dades del Plasma -Comment[ca@valencia]=Explorador de les dades publicades pels motors de dades del Plasma +Comment[ca@valencia]=Explorador de les dades publicades pels motors de dades de Plasma Comment[da]=Udforsk de data der offentligg��res af Plasma datamotorer Comment[de]=Zeigt die Daten an, die von Plasma-Datenquellen ver��ffentlicht werden Comment[el]=�� Plasma diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/lookandfeelexplorer/package/metadata.desktop new/plasma-sdk-5.24.4/lookandfeelexplorer/package/metadata.desktop --- old/plasma-sdk-5.24.3/lookandfeelexplorer/package/metadata.desktop 2022-03-08 12:31:06.000000000 +0100 +++ new/plasma-sdk-5.24.4/lookandfeelexplorer/package/metadata.desktop 2022-03-29 13:32:27.000000000 +0200 @@ -3,7 +3,7 @@ Comment[ast]=Esplora y edita los estilos globales de Plasma Comment[az]=Plasma Qlobal M��vzular��na bax�� v�� onlara d��z��li�� etm��k Comment[ca]=Explora i edita els vostres temes globals del Plasma -Comment[ca@valencia]=Explora i edita els vostres temes globals del Plasma +Comment[ca@valencia]=Explora i edita els vostres temes globals de Plasma Comment[cs]=Prohl��ejte a editujte Glob��ln�� Motivy Plasma Comment[da]=Udforsk og redig��r dine globale Plasma-temaer Comment[de]=Erforschen und bearbeiten Sie Ihre globalen Plasma-Designs @@ -39,7 +39,7 @@ Name[ast]=Esplorador d'estilos globales de Plasma Name[az]=Plasma Qlobal M��vzu B��l��d��isi Name[ca]=Explorador de temes globals del Plasma -Name[ca@valencia]=Explorador de temes globals del Plasma +Name[ca@valencia]=Explorador de temes globals de Plasma Name[cs]=Pr��zkumn��k Glob��ln��ch Motiv�� Plasma Name[da]=Plasma global temaudforsker Name[de]=Globaler Plasma-Designexplorer diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/plasmoidviewer/org.kde.plasmoidviewer.appdata.xml new/plasma-sdk-5.24.4/plasmoidviewer/org.kde.plasmoidviewer.appdata.xml --- old/plasma-sdk-5.24.3/plasmoidviewer/org.kde.plasmoidviewer.appdata.xml 2022-03-08 12:31:06.000000000 +0100 +++ new/plasma-sdk-5.24.4/plasmoidviewer/org.kde.plasmoidviewer.appdata.xml 2022-03-29 13:32:27.000000000 +0200 @@ -43,7 +43,7 @@ <summary xml:lang="ast">Ferramienta de prueba pa los applets de Plasma</summary> <summary xml:lang="az">Plasma ��lav��l��rinin test olunmas�� al��ti</summary> <summary xml:lang="ca">Eina de proves per a les miniaplicacions del Plasma</summary> - <summary xml:lang="ca-valencia">Eina de proves per a les miniaplicacions del Plasma</summary> + <summary xml:lang="ca-valencia">Eina de proves per a les miniaplicacions de Plasma</summary> <summary xml:lang="cs">Testovac�� n��stroj pro applety Plasma</summary> <summary xml:lang="da">Testv��rkt��j til Plasma-applets</summary> <summary xml:lang="de">Test-Werkzeug f��r Plasma-Miniprogramme</summary> @@ -81,7 +81,7 @@ <p xml:lang="ast">Visor de plasmoides ye una ferramienta gr��fica que permite a los desendolcadores probar los applets pa Plasma.</p> <p xml:lang="az">Plasmoidl��r�� bax�� vasit��si, t��rtibat��lara Plasma ��lav��l��rinin test olunmas��na imkan ver��n qrafik al��tidir.</p> <p xml:lang="ca">El Visor de plasmoides ��s una eina gr��fica que permet als desenvolupadors provar les miniaplicacions del Plasma.</p> - <p xml:lang="ca-valencia">El Visor de plasmoides ��s una eina gr��fica que permet als desenvolupadors provar les miniaplicacions del Plasma.</p> + <p xml:lang="ca-valencia">El Visor de plasmoides ��s una eina gr��fica que permet als desenvolupadors provar les miniaplicacions de Plasma.</p> <p xml:lang="cs">Prohl��e�� Plasmoid�� je grafick�� n��stroj umo��uj��c�� v��voj��m testovat aplety Plasma.</p> <p xml:lang="da">Plasmoid Viewer er et grafisk v��rkt��j der lader udviklere teste Plasma-applets.</p> <p xml:lang="de">Plasmoid-Betrachter ist ein Programm mit grafischer Oberfl��che, das es Entwicklern erm��glicht, Plasma-Miniprogramme zu testen.</p> @@ -120,10 +120,10 @@ <binary>plasmoidviewer</binary> </provides> <releases> + <release version="5.24.4" date="2022-03-29"/> <release version="5.24.3" date="2022-03-08"/> <release version="5.24.2" date="2022-02-22"/> <release version="5.24.1" date="2022-02-15"/> - <release version="5.23.5" date="2022-01-04"/> </releases> <screenshots> <screenshot type="default"> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/plasmoidviewer/org.kde.plasmoidviewer.desktop new/plasma-sdk-5.24.4/plasmoidviewer/org.kde.plasmoidviewer.desktop --- old/plasma-sdk-5.24.3/plasmoidviewer/org.kde.plasmoidviewer.desktop 2022-03-08 12:31:06.000000000 +0100 +++ new/plasma-sdk-5.24.4/plasmoidviewer/org.kde.plasmoidviewer.desktop 2022-03-29 13:32:27.000000000 +0200 @@ -40,7 +40,7 @@ GenericName[ast]=Ferramienta de prueba de widgets de Plasma GenericName[az]=Plasma vidjetl��rini test olunma al��ti GenericName[ca]=Eina de proves de ginys del Plasma -GenericName[ca@valencia]=Eina de proves de ginys del Plasma +GenericName[ca@valencia]=Eina de proves de ginys de Plasma GenericName[cs]=N��stroj na testov��n�� widget�� Plasma GenericName[da]=Testv��rkt��j til Plasma-widgets GenericName[de]=Testprogramm f��r Plasma-Bedienelemente @@ -76,7 +76,7 @@ Comment[ast]=Ferramienta de prueba pa los applets de Plasma Comment[az]=Plasma ��lav��l��rinin test olunmas�� al��ti Comment[ca]=Eina de proves per a les miniaplicacions del Plasma -Comment[ca@valencia]=Eina de proves per a les miniaplicacions del Plasma +Comment[ca@valencia]=Eina de proves per a les miniaplicacions de Plasma Comment[cs]=Testovac�� n��stroj pro applety Plasma Comment[da]=Testv��rkt��j til Plasma-applets Comment[de]=Test-Werkzeug f��r Plasma-Miniprogramme diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/ca(a)valencia/cuttlefish.po new/plasma-sdk-5.24.4/po/ca(a)valencia/cuttlefish.po --- old/plasma-sdk-5.24.3/po/ca(a)valencia/cuttlefish.po 2022-03-08 12:31:10.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/ca(a)valencia/cuttlefish.po 2022-03-29 13:32:30.000000000 +0200 @@ -54,7 +54,7 @@ #: package/contents/ui/Actions.qml:38 #, kde-format msgid "Breeze Dark Colors" -msgstr "Colors del Brisa fosca" +msgstr "Colors de Brisa fosca" #: package/contents/ui/Actions.qml:42 package/contents/ui/GlobalMenuBar.qml:35 #, kde-format diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/ca(a)valencia/org.kde.plasma.lookandfeelexplorer.po new/plasma-sdk-5.24.4/po/ca(a)valencia/org.kde.plasma.lookandfeelexplorer.po --- old/plasma-sdk-5.24.3/po/ca(a)valencia/org.kde.plasma.lookandfeelexplorer.po 2022-03-08 12:31:10.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/ca(a)valencia/org.kde.plasma.lookandfeelexplorer.po 2022-03-29 13:32:30.000000000 +0200 @@ -64,7 +64,7 @@ #: package/contents/ui/main.qml:105 package/contents/ui/MetadataEditor.qml:81 #, kde-format msgid "Author:" -msgstr "Autor:" +msgstr "Autoria:" #: package/contents/ui/main.qml:109 package/contents/ui/MetadataEditor.qml:85 #, kde-format @@ -89,7 +89,7 @@ #: package/contents/ui/main.qml:125 #, kde-format msgid "Layout from current Plasma setup" -msgstr "Disposici�� a la configuraci�� actual del Plasma" +msgstr "Disposici�� a la configuraci�� actual de Plasma" #: package/contents/ui/main.qml:131 #, kde-format @@ -99,7 +99,7 @@ #: package/contents/ui/main.qml:153 #, kde-format msgid "Click to open an image" -msgstr "Feu clic per a obrir una imatge" +msgstr "Feu clic per a obri una imatge" #: package/contents/ui/main.qml:189 #, kde-format @@ -119,7 +119,7 @@ #: package/contents/ui/MetadataEditor.qml:63 #, kde-format msgid "This theme plugin name already exists" -msgstr "Aquest nom de connector del tema ja existeix" +msgstr "Este nom de connector del tema ja existeix" #: package/contents/ui/MetadataEditor.qml:73 #, kde-format @@ -139,7 +139,7 @@ #: src/lnflogic.cpp:85 #, kde-format msgid "Cannot retrieve the current Plasma layout." -msgstr "No s'ha pogut rebre la disposici�� actual del Plasma." +msgstr "No s'ha pogut rebre la disposici�� actual de Plasma." #: src/lnflogic.cpp:93 #, kde-format @@ -156,7 +156,7 @@ #: src/lnflogic.cpp:107 #, kde-format msgid "Plasma Layout successfully duplicated" -msgstr "La disposici�� del Plasma ha estat duplicada amb ��xit" +msgstr "La disposici�� de Plasma ha estat duplicada amb ��xit" #: src/lnflogic.cpp:158 #, kde-format @@ -178,9 +178,9 @@ #: src/main.cpp:34 #, kde-format msgid "Plasma Look And Feel Explorer" -msgstr "Explorador de temes d'Aspecte i comportament del Plasma" +msgstr "Explorador de temes d'Aspecte i comportament de Plasma" #: src/main.cpp:38 #, kde-format msgid "Look And Feel to open" -msgstr "Aspecte i comportament a obrir" \ No newline at end of file +msgstr "Aspecte i comportament a obri" \ No newline at end of file diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/ca(a)valencia/org.kde.plasma.themeexplorer.po new/plasma-sdk-5.24.4/po/ca(a)valencia/org.kde.plasma.themeexplorer.po --- old/plasma-sdk-5.24.3/po/ca(a)valencia/org.kde.plasma.themeexplorer.po 2022-03-08 12:31:10.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/ca(a)valencia/org.kde.plasma.themeexplorer.po 2022-03-29 13:32:30.000000000 +0200 @@ -247,12 +247,12 @@ #: package/contents/ui/main.qml:101 #, kde-format msgid "Search��" -msgstr "Cerca��" +msgstr "Busca��" #: package/contents/ui/main.qml:219 #, kde-format msgid "This is a readonly, system wide installed theme" -msgstr "Aquest ��s un tema instal��lat del sistema, nom��s de lectura" +msgstr "Este ��s un tema instal��lat del sistema, nom��s de lectura" #: package/contents/ui/main.qml:224 #, kde-format @@ -272,12 +272,12 @@ #: package/contents/ui/main.qml:249 #, kde-format msgid "Missing from this theme" -msgstr "Falta en aquest tema" +msgstr "Falta en este tema" #: package/contents/ui/main.qml:249 #, kde-format msgid "Present in this theme" -msgstr "Present en aquest tema" +msgstr "Present en este tema" #: package/contents/ui/main.qml:254 #, kde-format @@ -319,12 +319,12 @@ #: package/contents/ui/MetadataEditor.qml:86 #, kde-format msgid "This theme name already exists" -msgstr "Aquest nom de tema ja existeix" +msgstr "Este nom de tema ja existeix" #: package/contents/ui/MetadataEditor.qml:95 #, kde-format msgid "Author:" -msgstr "Autor:" +msgstr "Autoria:" #: package/contents/ui/MetadataEditor.qml:103 #, kde-format @@ -344,9 +344,9 @@ #: src/main.cpp:37 #, kde-format msgid "Plasma Theme Explorer" -msgstr "Explorador de temes del Plasma" +msgstr "Explorador de temes de Plasma" #: src/main.cpp:41 #, kde-format msgid "The theme to open" -msgstr "El tema a obrir" \ No newline at end of file +msgstr "El tema a obri" \ No newline at end of file diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/ca(a)valencia/plasma_shell_org.kde.plasmoidviewershell.po new/plasma-sdk-5.24.4/po/ca(a)valencia/plasma_shell_org.kde.plasmoidviewershell.po --- old/plasma-sdk-5.24.3/po/ca(a)valencia/plasma_shell_org.kde.plasmoidviewershell.po 2022-03-08 12:31:10.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/ca(a)valencia/plasma_shell_org.kde.plasmoidviewershell.po 2022-03-29 13:32:30.000000000 +0200 @@ -47,7 +47,7 @@ #: contents/configuration/AboutPlugin.qml:127 msgid "Authors" -msgstr "Autors" +msgstr "Autoria" #: contents/configuration/AboutPlugin.qml:137 msgid "Credits" @@ -55,7 +55,7 @@ #: contents/configuration/AboutPlugin.qml:148 msgid "Translators" -msgstr "Traductors" +msgstr "Equip de traducci��" #: contents/configuration/AppletConfiguration.qml:40 msgid "Keyboard Shortcuts" @@ -103,7 +103,7 @@ #: contents/configuration/ConfigurationContainmentActions.qml:22 msgid "Back-Button" -msgstr "Bot�� arrere" +msgstr "Bot�� enrere" #: contents/configuration/ConfigurationContainmentActions.qml:23 msgid "Forward-Button" @@ -161,7 +161,7 @@ #: contents/configuration/ConfigurationContainmentAppearance.qml:115 msgid "Get New Plugins..." -msgstr "Obt��n connectors nous..." +msgstr "Obt��n connectors nous..." #: contents/configuration/ConfigurationContainmentAppearance.qml:127 msgid "Layout changes must be applied before other changes can be made" @@ -177,7 +177,7 @@ #: contents/configuration/ConfigurationShortcuts.qml:26 msgid "This shortcut will activate the applet as though it had been clicked." -msgstr "Aquesta drecera activar�� la miniaplicaci�� com si s'haguera clicat." +msgstr "Esta drecera activar�� la miniaplicaci�� com si s'haguera clicat." #: contents/configuration/ContainmentConfiguration.qml:31 msgid "Wallpaper" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/ca(a)valencia/plasmaengineexplorer.po new/plasma-sdk-5.24.4/po/ca(a)valencia/plasmaengineexplorer.po --- old/plasma-sdk-5.24.3/po/ca(a)valencia/plasmaengineexplorer.po 2022-03-08 12:31:10.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/ca(a)valencia/plasmaengineexplorer.po 2022-03-29 13:32:30.000000000 +0200 @@ -44,12 +44,12 @@ #: engineexplorer.cpp:40 main.cpp:56 #, kde-format msgid "Plasma Engine Explorer" -msgstr "Explorador de motors del Plasma" +msgstr "Explorador de motors de Plasma" #: engineexplorer.cpp:69 #, kde-format msgid "Search" -msgstr "Cerca" +msgstr "Busca" #: engineexplorer.cpp:169 #, kde-format @@ -76,12 +76,12 @@ #: engineexplorer.cpp:288 #, kde-format msgid "Get associated service" -msgstr "Obt��n el servei associat" +msgstr "Obt��n el servei associat" #: engineexplorer.cpp:289 #, kde-format msgid "Get associated model" -msgstr "Obt��n el model associat" +msgstr "Obt��n el model associat" #: engineexplorer.cpp:290 #, kde-format @@ -132,7 +132,7 @@ #: engineexplorer.cpp:478 engineexplorer.ui:29 #, kde-format msgid "Plasma DataEngine Explorer" -msgstr "Explorador de motors de dades del Plasma" +msgstr "Explorador de motors de dades de Plasma" #: engineexplorer.cpp:482 #, kde-format @@ -187,7 +187,7 @@ #: ktreeviewsearchline.cpp:422 #, kde-format msgid "Search Columns" -msgstr "Cerca a les columnes" +msgstr "Busca a les columnes" #: ktreeviewsearchline.cpp:424 #, kde-format @@ -207,7 +207,7 @@ #: main.cpp:58 #, kde-format msgid "Explore the data published by Plasma DataEngines" -msgstr "Explora les dades publicades pels motors de dades del Plasma" +msgstr "Explora les dades publicades pels motors de dades de Plasma" #: main.cpp:60 #, kde-format @@ -222,7 +222,7 @@ #: main.cpp:61 #, kde-format msgid "Author and maintainer" -msgstr "Autor i mantenidor" +msgstr "Autoria i mantenidor" #: main.cpp:68 #, kde-format @@ -287,7 +287,7 @@ "source." msgstr "" "No s'ha retornat cap model v��lid. Comproveu que estiga disponible un model " -"per a aquesta font." +"per a esta font." #: modelviewer.cpp:100 #, kde-format @@ -313,7 +313,7 @@ "source." msgstr "" "No s'ha retornat cap servei v��lid. Comproveu que estiga disponible un servei " -"per a aquesta font." +"per a esta font." #: serviceviewer.cpp:72 #, kde-format diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/id/cuttlefish.po new/plasma-sdk-5.24.4/po/id/cuttlefish.po --- old/plasma-sdk-5.24.3/po/id/cuttlefish.po 2022-03-08 12:31:17.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/id/cuttlefish.po 2022-03-29 13:32:38.000000000 +0200 @@ -15,7 +15,6 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Lokalize 20.12.1\n" #: package/contents/ui/Actions.qml:16 #, kde-format diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/id/org.kde.plasma.lookandfeelexplorer.po new/plasma-sdk-5.24.4/po/id/org.kde.plasma.lookandfeelexplorer.po --- old/plasma-sdk-5.24.3/po/id/org.kde.plasma.lookandfeelexplorer.po 2022-03-08 12:31:17.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/id/org.kde.plasma.lookandfeelexplorer.po 2022-03-29 13:32:38.000000000 +0200 @@ -15,7 +15,6 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Lokalize 19.12.0\n" #, kde-format msgctxt "NAME OF TRANSLATORS" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/id/plasmaengineexplorer.po new/plasma-sdk-5.24.4/po/id/plasmaengineexplorer.po --- old/plasma-sdk-5.24.3/po/id/plasmaengineexplorer.po 2022-03-08 12:31:17.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/id/plasmaengineexplorer.po 2022-03-29 13:32:38.000000000 +0200 @@ -17,7 +17,6 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Lokalize 19.12.1\n" #, kde-format msgctxt "NAME OF TRANSLATORS" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/id/plasmoidviewer.po new/plasma-sdk-5.24.4/po/id/plasmoidviewer.po --- old/plasma-sdk-5.24.3/po/id/plasmoidviewer.po 2022-03-08 12:31:17.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/id/plasmoidviewer.po 2022-03-29 13:32:38.000000000 +0200 @@ -17,7 +17,6 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Lokalize 20.12.1\n" #, kde-format msgctxt "NAME OF TRANSLATORS" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/zh_CN/cuttlefish.po new/plasma-sdk-5.24.4/po/zh_CN/cuttlefish.po --- old/plasma-sdk-5.24.3/po/zh_CN/cuttlefish.po 2022-03-08 12:31:33.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/zh_CN/cuttlefish.po 2022-03-29 13:32:52.000000000 +0200 @@ -8,7 +8,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-05-26 00:21+0000\n" -"PO-Revision-Date: 2022-03-05 15:06\n" +"PO-Revision-Date: 2022-03-16 15:49\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/zh_CN/cuttlefish_editorplugin.po new/plasma-sdk-5.24.4/po/zh_CN/cuttlefish_editorplugin.po --- old/plasma-sdk-5.24.3/po/zh_CN/cuttlefish_editorplugin.po 2022-03-08 12:31:33.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/zh_CN/cuttlefish_editorplugin.po 2022-03-29 13:32:52.000000000 +0200 @@ -7,7 +7,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-04-06 00:20+0000\n" -"PO-Revision-Date: 2022-03-05 15:06\n" +"PO-Revision-Date: 2022-03-16 15:49\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/zh_CN/org.kde.plasma.lookandfeelexplorer.po new/plasma-sdk-5.24.4/po/zh_CN/org.kde.plasma.lookandfeelexplorer.po --- old/plasma-sdk-5.24.3/po/zh_CN/org.kde.plasma.lookandfeelexplorer.po 2022-03-08 12:31:33.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/zh_CN/org.kde.plasma.lookandfeelexplorer.po 2022-03-29 13:32:52.000000000 +0200 @@ -7,7 +7,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-05-26 00:21+0000\n" -"PO-Revision-Date: 2022-03-05 15:06\n" +"PO-Revision-Date: 2022-03-16 15:49\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/zh_CN/org.kde.plasma.themeexplorer.po new/plasma-sdk-5.24.4/po/zh_CN/org.kde.plasma.themeexplorer.po --- old/plasma-sdk-5.24.3/po/zh_CN/org.kde.plasma.themeexplorer.po 2022-03-08 12:31:33.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/zh_CN/org.kde.plasma.themeexplorer.po 2022-03-29 13:32:52.000000000 +0200 @@ -7,7 +7,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2022-01-17 02:06+0000\n" -"PO-Revision-Date: 2022-03-05 15:06\n" +"PO-Revision-Date: 2022-03-16 15:49\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/zh_CN/plasma_shell_org.kde.plasmoidviewershell.po new/plasma-sdk-5.24.4/po/zh_CN/plasma_shell_org.kde.plasmoidviewershell.po --- old/plasma-sdk-5.24.3/po/zh_CN/plasma_shell_org.kde.plasmoidviewershell.po 2022-03-08 12:31:33.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/zh_CN/plasma_shell_org.kde.plasmoidviewershell.po 2022-03-29 13:32:52.000000000 +0200 @@ -7,7 +7,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-09-02 00:19+0000\n" -"PO-Revision-Date: 2022-03-05 15:06\n" +"PO-Revision-Date: 2022-03-16 15:49\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/zh_CN/plasmaengineexplorer.po new/plasma-sdk-5.24.4/po/zh_CN/plasmaengineexplorer.po --- old/plasma-sdk-5.24.3/po/zh_CN/plasmaengineexplorer.po 2022-03-08 12:31:33.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/zh_CN/plasmaengineexplorer.po 2022-03-29 13:32:52.000000000 +0200 @@ -9,7 +9,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-05-26 00:21+0000\n" -"PO-Revision-Date: 2022-03-05 15:06\n" +"PO-Revision-Date: 2022-03-16 15:49\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/po/zh_CN/plasmoidviewer.po new/plasma-sdk-5.24.4/po/zh_CN/plasmoidviewer.po --- old/plasma-sdk-5.24.3/po/zh_CN/plasmoidviewer.po 2022-03-08 12:31:33.000000000 +0100 +++ new/plasma-sdk-5.24.4/po/zh_CN/plasmoidviewer.po 2022-03-29 13:32:52.000000000 +0200 @@ -13,7 +13,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-04-06 00:20+0000\n" -"PO-Revision-Date: 2022-03-05 15:06\n" +"PO-Revision-Date: 2022-03-16 15:49\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-sdk-5.24.3/themeexplorer/package/metadata.desktop new/plasma-sdk-5.24.4/themeexplorer/package/metadata.desktop --- old/plasma-sdk-5.24.3/themeexplorer/package/metadata.desktop 2022-03-08 12:31:06.000000000 +0100 +++ new/plasma-sdk-5.24.4/themeexplorer/package/metadata.desktop 2022-03-29 13:32:27.000000000 +0200 @@ -3,7 +3,7 @@ Comment[ast]=Esplora y edita los estilos de Plasma Comment[az]=Plasma movzular��n��za bax�� v�� onlara d��z��li�� Comment[ca]=Explora i edita els vostres temes del Plasma -Comment[ca@valencia]=Explora i edita els vostres temes del Plasma +Comment[ca@valencia]=Explora i edita els vostres temes de Plasma Comment[da]=Udforsk og redig��r dine Plasma-temaer Comment[de]=Erforschen und bearbeiten Sie Ihre Plasma-Designs Comment[el]=�� Plasma @@ -43,7 +43,7 @@ Name[ast]=Esplorador d'estilos de Plasma Name[az]=Plasma M��vzu B��l��d��isi Name[ca]=Explorador de temes del Plasma -Name[ca@valencia]=Explorador de temes del Plasma +Name[ca@valencia]=Explorador de temes de Plasma Name[cs]=Pr��zkumn��k motiv�� Plasma Name[da]=Plasma temaudforsker Name[de]=Plasma-Designexplorer

1 0

commit plasma5-phone-components for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package plasma5-phone-components for openSUSE:Factory checked in at 2022-04-01 21:35:27 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/plasma5-phone-components (Old) and /work/SRC/openSUSE:Factory/.plasma5-phone-components.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "plasma5-phone-components" Fri Apr 1 21:35:27 2022 rev:26 rq:965925 version:5.24.4 Changes: -------- --- /work/SRC/openSUSE:Factory/plasma5-phone-components/plasma5-phone-components.changes 2022-03-12 17:15:54.190335180 +0100 +++ /work/SRC/openSUSE:Factory/.plasma5-phone-components.new.1900/plasma5-phone-components.changes 2022-04-01 21:36:14.529407440 +0200 @@ -1,0 +2,10 @@ +Tue Mar 29 16:04:39 UTC 2022 - Fabian Vogt <fabian(a)ritter-vogt.de> + +- Update to 5.24.4 + * New bugfix release + * For more details please see: + * https://kde.org/announcements/plasma/5/5.24.4 +- Changes since 5.24.3: + * mmplugin: set all connections to not autoconnect on setMobileDataEnabled(false) (#182) + +------------------------------------------------------------------- Old: ---- plasma-mobile-5.24.3.tar.xz plasma-mobile-5.24.3.tar.xz.sig New: ---- plasma-mobile-5.24.4.tar.xz plasma-mobile-5.24.4.tar.xz.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ plasma5-phone-components.spec ++++++ --- /var/tmp/diff_new_pack.6Ed58e/_old 2022-04-01 21:36:15.101401167 +0200 +++ /var/tmp/diff_new_pack.6Ed58e/_new 2022-04-01 21:36:15.105401123 +0200 @@ -24,7 +24,7 @@ %bcond_without released Name: plasma5-phone-components -Version: 5.24.3 +Version: 5.24.4 Release: 0 # Full Plasma 5 version (e.g. 5.9.3) %{!?_plasma5_bugfix: %define _plasma5_bugfix %{version}} ++++++ plasma-mobile-5.24.3.tar.xz -> plasma-mobile-5.24.4.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-mobile-5.24.3/bin/plasma-mobile.desktop.cmake new/plasma-mobile-5.24.4/bin/plasma-mobile.desktop.cmake --- old/plasma-mobile-5.24.3/bin/plasma-mobile.desktop.cmake 2022-03-08 12:29:08.000000000 +0100 +++ new/plasma-mobile-5.24.4/bin/plasma-mobile.desktop.cmake 2022-03-29 13:30:33.000000000 +0200 @@ -37,7 +37,7 @@ Name[sk]=Plasma Mobile Name[sl]=Plasma Mobile Name[sv]=Plasma mobil -Name[tr]=Plasma Mobil +Name[tr]=Plasma Mobile Name[uk]=�� Name[x-test]=xxPlasma Mobilexx Name[zh_CN]=Plasma Mobile @@ -74,7 +74,7 @@ Comment[sk]=Plasma Mobile od KDE Comment[sl]=Plasma Mobile od KDE Comment[sv]=Plasma mobil av KDE -Comment[tr]=KDE taraf��ndan yap��lan Plasma Mobil +Comment[tr]=KDE taraf��ndan yap��lan Plasma Mobile Comment[uk]=�� KDE Comment[x-test]=xxPlasma Mobile by KDExx Comment[zh_CN]=KDE Plasma Mobile diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-mobile-5.24.3/components/mmplugin/signalindicator.cpp new/plasma-mobile-5.24.4/components/mmplugin/signalindicator.cpp --- old/plasma-mobile-5.24.3/components/mmplugin/signalindicator.cpp 2022-03-08 12:29:08.000000000 +0100 +++ new/plasma-mobile-5.24.4/components/mmplugin/signalindicator.cpp 2022-03-29 13:30:33.000000000 +0200 @@ -47,11 +47,30 @@ bool SignalIndicator::mobileDataEnabled() const { + // no modem -> no mobile data -> report disabled if (!m_nmModem) { return false; } - return m_nmModem->state() == NetworkManager::Device::Activated || m_nmModem->autoconnect(); + // mobile data already activated -> report enabled + if (m_nmModem->state() == NetworkManager::Device::Activated) { + return true; + } + + // autoconnect disabled on the entire modem -> report disabled + if (!m_nmModem->autoconnect()) { + return false; + } + + // at least one connection set to autoconnect -> report enabled + for (NetworkManager::Connection::Ptr con : m_nmModem->availableConnections()) { + if (con->settings()->autoconnect()) { + return true; + } + } + + // modem, but no connection, set to autoconnect -> report disabled (#182) + return false; } void SignalIndicator::setMobileDataEnabled(bool enabled) @@ -59,30 +78,37 @@ if (!m_nmModem) { return; } - if (!enabled) { m_nmModem->setAutoconnect(false); - - // before disconnecting, we ensure the current active connection is set to autoconnect + // we need to also set all connections to not autoconnect (#182) for (NetworkManager::Connection::Ptr con : m_nmModem->availableConnections()) { - if (con->uuid() == m_nmModem->activeConnection()->uuid()) { - con->settings()->setAutoconnect(true); - } else { - con->settings()->setAutoconnect(false); - } + con->settings()->setAutoconnect(false); + con->update(con->settings()->toMap()); } - m_nmModem->disconnectInterface().waitForFinished(); } else { m_nmModem->setAutoconnect(true); - - // activate the connection that is set to autoconnect + // activate the connection that was last used + QDateTime latestTimestamp; + NetworkManager::Connection::Ptr latestCon; for (NetworkManager::Connection::Ptr con : m_nmModem->availableConnections()) { - if (con->settings()->autoconnect()) { - NetworkManager::activateConnection(con->path(), m_nmModem->uni(), ""); - break; + QDateTime timestamp = con->settings()->timestamp(); + // if con was not used yet, skip it, otherwise: + // if we have no latestTimestamp yet, con is the latest + // otherwise, compare the timestamps + // in case of a tie, use the first connection that was found + if (!timestamp.isNull() && (latestTimestamp.isNull() || timestamp > latestTimestamp)) { + latestTimestamp = timestamp; + latestCon = con; } } + // if we found the last used connection + if (!latestCon.isNull()) { + // set it to autoconnect and connect it immediately + latestCon->settings()->setAutoconnect(true); + latestCon->update(latestCon->settings()->toMap()); + NetworkManager::activateConnection(latestCon->path(), m_nmModem->uni(), ""); + } } } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-mobile-5.24.3/containments/panel/package/metadata.desktop new/plasma-mobile-5.24.4/containments/panel/package/metadata.desktop --- old/plasma-mobile-5.24.3/containments/panel/package/metadata.desktop 2022-03-08 12:29:08.000000000 +0100 +++ new/plasma-mobile-5.24.4/containments/panel/package/metadata.desktop 2022-03-29 13:30:33.000000000 +0200 @@ -7,7 +7,7 @@ Name=Phone Panel Name[ast]=Panel del tel��fonu Name[ca]=Plaf�� del tel��fon -Name[ca@valencia]=Plaf�� del tel��fon +Name[ca@valencia]=Quadre del tel��fon Name[cs]=Panel telefonu Name[da]=Panel til telefon Name[en_GB]=Phone Panel diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-mobile-5.24.3/containments/taskpanel/package/metadata.desktop new/plasma-mobile-5.24.4/containments/taskpanel/package/metadata.desktop --- old/plasma-mobile-5.24.3/containments/taskpanel/package/metadata.desktop 2022-03-08 12:29:08.000000000 +0100 +++ new/plasma-mobile-5.24.4/containments/taskpanel/package/metadata.desktop 2022-03-29 13:30:33.000000000 +0200 @@ -7,7 +7,7 @@ Name=Phone Task panel Name[ast]=Panel de xeres del tel��fonu Name[ca]=Plaf�� de tasques del tel��fon -Name[ca@valencia]=Plaf�� de tasques del tel��fon +Name[ca@valencia]=Quadre de tasques del tel��fon Name[da]=Opgavepanel til telefon Name[en_GB]=Phone Task panel Name[es]=Panel de tareas del tel��fono diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-mobile-5.24.3/look-and-feel/metadata.desktop new/plasma-mobile-5.24.4/look-and-feel/metadata.desktop --- old/plasma-mobile-5.24.3/look-and-feel/metadata.desktop 2022-03-08 12:29:08.000000000 +0100 +++ new/plasma-mobile-5.24.4/look-and-feel/metadata.desktop 2022-03-29 13:30:33.000000000 +0200 @@ -5,7 +5,7 @@ Name=Plasma Phone Name[ast]=Plasma Phone Name[ca]=Tel��fon del Plasma -Name[ca@valencia]=Tel��fon del Plasma +Name[ca@valencia]=Tel��fon de Plasma Name[cs]=Plasma Phone Name[da]=Plasma Phone Name[de]=Plasma Phone @@ -42,7 +42,7 @@ Comment=Plasma workspace for smartphones Comment[ast]=La estaya de trabayu de Plasma pa tel��fonos intelixentes Comment[ca]=Espai de treball del Plasma per a tel��fons intel��ligents -Comment[ca@valencia]=Espai de treball del Plasma per a tel��fons intel��ligents +Comment[ca@valencia]=Espai de treball de Plasma per a tel��fons intel��ligents Comment[da]=Plasma arbejdsomr��de til smartphones Comment[de]=Plasma-Arbeitsbereich f��r Smartphones Comment[en_GB]=Plasma workspace for smartphones

1 0

commit plasma5-nano for openSUSE:Factory
by Source-Sync 01 Apr '22

01 Apr '22

Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package plasma5-nano for openSUSE:Factory checked in at 2022-04-01 21:35:26 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/plasma5-nano (Old) and /work/SRC/openSUSE:Factory/.plasma5-nano.new.1900 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "plasma5-nano" Fri Apr 1 21:35:26 2022 rev:35 rq:965922 version:5.24.4 Changes: -------- --- /work/SRC/openSUSE:Factory/plasma5-nano/plasma5-nano.changes 2022-03-12 17:15:53.342334198 +0100 +++ /work/SRC/openSUSE:Factory/.plasma5-nano.new.1900/plasma5-nano.changes 2022-04-01 21:36:13.497418759 +0200 @@ -1,0 +2,9 @@ +Tue Mar 29 16:04:39 UTC 2022 - Fabian Vogt <fabian(a)ritter-vogt.de> + +- Update to 5.24.4 + * New bugfix release + * For more details please see: + * https://kde.org/announcements/plasma/5/5.24.4 +- No code changes since 5.24.3 + +------------------------------------------------------------------- Old: ---- plasma-nano-5.24.3.tar.xz plasma-nano-5.24.3.tar.xz.sig New: ---- plasma-nano-5.24.4.tar.xz plasma-nano-5.24.4.tar.xz.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ plasma5-nano.spec ++++++ --- /var/tmp/diff_new_pack.sdI2og/_old 2022-04-01 21:36:14.065412529 +0200 +++ /var/tmp/diff_new_pack.sdI2og/_new 2022-04-01 21:36:14.073412441 +0200 @@ -20,7 +20,7 @@ %bcond_without released Name: plasma5-nano -Version: 5.24.3 +Version: 5.24.4 Release: 0 # Full Plasma 5 version (e.g. 5.9.3) %{!?_plasma5_bugfix: %define _plasma5_bugfix %{version}} ++++++ plasma-nano-5.24.3.tar.xz -> plasma-nano-5.24.4.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-nano-5.24.3/desktoptoolbox/metadata.desktop new/plasma-nano-5.24.4/desktoptoolbox/metadata.desktop --- old/plasma-nano-5.24.3/desktoptoolbox/metadata.desktop 2022-03-08 12:29:29.000000000 +0100 +++ new/plasma-nano-5.24.4/desktoptoolbox/metadata.desktop 2022-03-29 13:30:55.000000000 +0200 @@ -3,7 +3,7 @@ Name[ast]=Caxa de ferramientes de Plasma Nano Name[az]=Plasma Nano al��tl��r qutusu Name[ca]=Quadre d'eines del Plasma Nano -Name[ca@valencia]=Quadre d'eines del Plasma Nano +Name[ca@valencia]=Quadre d'eines de Plasma Nano Name[da]=V��rkt��jskasse til Plasma Nano Name[de]=Plasma-Nano-Werkzeugkasten Name[el]=�� Plasma Nano diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-nano-5.24.3/po/id/plasma_shell_org.kde.plasma.nano.po new/plasma-nano-5.24.4/po/id/plasma_shell_org.kde.plasma.nano.po --- old/plasma-nano-5.24.3/po/id/plasma_shell_org.kde.plasma.nano.po 2022-03-08 12:29:38.000000000 +0100 +++ new/plasma-nano-5.24.4/po/id/plasma_shell_org.kde.plasma.nano.po 2022-03-29 13:31:04.000000000 +0200 @@ -15,7 +15,6 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Lokalize 19.08.3\n" #: contents/configuration/ConfigurationContainmentAppearance.qml:50 msgid "Layout cannot be changed while widgets are locked" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-nano-5.24.3/po/id/plasma_toolbox_org.kde.plasma.nano.desktoptoolbox.po new/plasma-nano-5.24.4/po/id/plasma_toolbox_org.kde.plasma.nano.desktoptoolbox.po --- old/plasma-nano-5.24.3/po/id/plasma_toolbox_org.kde.plasma.nano.desktoptoolbox.po 2022-03-08 12:29:38.000000000 +0100 +++ new/plasma-nano-5.24.4/po/id/plasma_toolbox_org.kde.plasma.nano.desktoptoolbox.po 2022-03-29 13:31:04.000000000 +0200 @@ -15,7 +15,6 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Lokalize 19.08.3\n" #: contents/ui/DesktopConfigButtons.qml:47 #, kde-format diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-nano-5.24.3/po/zh_CN/plasma_shell_org.kde.plasma.nano.po new/plasma-nano-5.24.4/po/zh_CN/plasma_shell_org.kde.plasma.nano.po --- old/plasma-nano-5.24.3/po/zh_CN/plasma_shell_org.kde.plasma.nano.po 2022-03-08 12:29:49.000000000 +0100 +++ new/plasma-nano-5.24.4/po/zh_CN/plasma_shell_org.kde.plasma.nano.po 2022-03-29 13:31:15.000000000 +0200 @@ -3,7 +3,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-09-15 00:20+0000\n" -"PO-Revision-Date: 2022-03-05 15:06\n" +"PO-Revision-Date: 2022-03-16 15:49\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/plasma-nano-5.24.3/po/zh_CN/plasma_toolbox_org.kde.plasma.nano.desktoptoolbox.po new/plasma-nano-5.24.4/po/zh_CN/plasma_toolbox_org.kde.plasma.nano.desktoptoolbox.po --- old/plasma-nano-5.24.3/po/zh_CN/plasma_toolbox_org.kde.plasma.nano.desktoptoolbox.po 2022-03-08 12:29:49.000000000 +0100 +++ new/plasma-nano-5.24.4/po/zh_CN/plasma_toolbox_org.kde.plasma.nano.desktoptoolbox.po 2022-03-29 13:31:15.000000000 +0200 @@ -3,7 +3,7 @@ "Project-Id-Version: kdeorg\n" "Report-Msgid-Bugs-To: https://bugs.kde.org\n" "POT-Creation-Date: 2021-03-03 03:24+0100\n" -"PO-Revision-Date: 2022-03-05 15:06\n" +"PO-Revision-Date: 2022-03-16 15:49\n" "Last-Translator: \n" "Language-Team: Chinese Simplified\n" "Language: zh_CN\n"

1 0