https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c1 Johannes Meixner changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jsmeix@novell.com Component|Basesystem |Other Platform|Other |All OS/Version|Other |openSUSE 11.4 --- Comment #1 from Johannes Meixner 2011-03-22 10:07:36 UTC --- What do the following comands output (run them as root) lsscsi -g and sane-find-scanner and scanimage -L SCSI scanner permissions are set via udev via /etc/udev/rules.d/55-libsane.rules which reads: ----------------------------------------------------------------------- # The SCSI device support is very basic and includes only # scanners that mark themselves as type "scanner" or # SCSI-scanners from HP and other vendors that are entitled "processor" # but are treated accordingly. .. LABEL="libsane_scsi_rules_begin" .. LABEL="libsane_scsi_rules_end" ----------------------------------------------------------------------- FYI: See http://en.opensuse.org/SDB:Configuring_Scanners "USB scanner access permissions via udev" how you could get permission issues out of sight. A "Local Host Configuration" for the "saned" works also for SCSI scanners. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c2 --- Comment #2 from Johannes Meixner 2011-03-22 10:10:42 UTC --- What is the output of ls -l /dev/sg3 and getfacl /dev/sg3 (you may have to replace '/dev/sg3' with the right generuic SCSI device file of your scanner). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c4 Johannes Meixner changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |dieter.jurzitza@t-online.de --- Comment #4 from Johannes Meixner 2011-03-23 10:00:10 UTC --- See comment #1: What do the following comands output (run them as root) lsscsi -g and lsscsi -c -g and sane-find-scanner and scanimage -L I need this output to check if a udev rule in /etc/udev/rules.d/55-libsane.rules matches to your particular scanner model. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c6 Johannes Meixner changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |dieter.jurzitza@t-online.de --- Comment #6 from Johannes Meixner 2011-03-24 12:07:24 UTC --- You are right that the above udev-rule should match to your device and set ENV{libsane_matched}="yes" which is then evaluated by /lib/udev/rules.d/70-acl.rules ---------------------------------------------------------------------------- # SCSI and USB scanners ENV{libsane_matched}=="yes", TAG+="udev-acl" .. # apply ACL for all locally logged in users LABEL="acl_apply", TAG=="udev-acl", TEST=="/var/run/ConsoleKit/database", \ RUN+="udev-acl --action=$env{ACTION} --device=$env{DEVNAME}" ---------------------------------------------------------------------------- For my USB scanners this works (i.e. it applies an ACL when I am locally logged in) but I have currently no SCSI scanner to test it. How do you log in? Via graphical log in (i.e. via XDM/KDM) directly at the computer or via text console directly at the computer or from remote? As far as I know it applies an ACL only when logged in directly at the computer via graphical log in. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c8 --- Comment #8 from Johannes Meixner 2011-03-24 13:18:51 UTC --- Could you test if it works when you replace in /etc/udev/rules.d/55-libsane.rules the ATTR{type}=="6" with ATTRS{type}=="6" and then reboot the system. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c10 --- Comment #10 from Dieter Jurzitza 2011-03-24 20:44:31 UTC --- Created an attachment (id=421268) --> (http://bugzilla.novell.com/attachment.cgi?id=421268) This is the output of udevadm if ATTR rather than ATTRS is used. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c12 --- Comment #12 from Dieter Jurzitza 2011-03-24 20:45:46 UTC --- Created an attachment (id=421270) --> (http://bugzilla.novell.com/attachment.cgi?id=421270) Output of getfacl after fixing ... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c14 --- Comment #14 from Dieter Jurzitza 2011-03-24 20:49:54 UTC --- Well folks, the suggestion of Johannes did the trick for me! @Axel: probably you can play with udevadm to find out what is going on: udevadm test /sys/class/scsi_generic/sg3 (replace sg3 by the appropriate device of your system!) See the files I attached for results. @Johannes: I guess you have to issue a fix for sane-backends, because the current situation is a total showstopper for scsi-scanners (though, obviously, few people use it ...) And, big fat thank you for your help! Thank you for looking into this, take care Dieter Jurzitza -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c16 Johannes Meixner changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P3 - Medium Status|NEW |ASSIGNED --- Comment #16 from Johannes Meixner 2011-03-25 09:07:27 UTC --- Very many thanks for your valuable information! It is not caused by SANE upstream. It is caused by our selfmade mess :-( SANE upstream uses "ATTRS" but I change it to "ATTR" because of bug#436085 But now via this bug I learned (I am not at all a udev expert) that only for USB scanners "ATTR" is sufficient (and faster) but in contrast for SCSI scanners "ATTRS" is mandatory. I will fix it and then trigger that we could provide an official update for our sane-backends package. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c17 Johannes Meixner changed: What |Removed |Added ---------------------------------------------------------------------------- InfoProvider|axel.braun@gmx.de |dieter.jurzitza@t-online.de --- Comment #17 from Johannes Meixner 2011-03-25 12:17:59 UTC --- Fixed sane-backends RPMs are now available for download from http://download.opensuse.org/repositories/graphics/ for openSUSE 11.2, 11.3, 11.4 and Factory for 32-bit i586 and 64-bit x86_64 architecture. For example for openSUSE 11.4 for i586 architecture install sane-backends-1.0.22-47.1.i586.rpm and optionally sane-backends-autoconfig-1.0.22-47.1.i586.rpm from http://download.opensuse.org/repositories/graphics/openSUSE_11.4/i586/ Those packages from the "graphics" project may now require something like "libjpeg.so.62(LIBJPEG_6.2)" which is not provided by the default libjpeg62 packages in openSUSE 11.4 but it is provided by the libjpeg62 packages in the "graphics" project so that you may have to install additionally libjpeg62 packages from the "graphics" project to fulfill the requirements of sane-backends from the "graphics" project. Do not use "Factory" unless you know exactly what you do. Use the matching packages for your particular system. The packages are * only for testing * without any guarantee or warranty * without any support As an extreme example, this means that if your complete computer center crashes because of these packages, it is only your problem. On the other hand this does not mean that those packages are known to be terrible broken but they are not thoroughly tested so that any unexpected issue can happen. Dieter Jurzitza, I would appreciate it very much if you agree to test whether or not the fixed sane-backends RPMs from the "graphics" project work for you. It works for me on my particular openSUSE 11.4 workstation with my particular USB scanners but I like to have feedback from a user with a real SCSI scanner before I submit it as official update for openSUSE 11.4. Very many thanks in advance! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c18 Dieter Jurzitza changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED InfoProvider|dieter.jurzitza@t-online.de | --- Comment #18 from Dieter Jurzitza 2011-03-26 13:29:29 UTC --- Hi Johannes, I told you I would do further testing :-). There you go: For those devices announcing themselves as "processor" it is not sufficient to change one ATTR - attribute but you need to change them all. I tested this with my second HP-Scanner. So, please find a patch against your latest release of sane-backends to fix this behaviour, too. Please re-patch! djunix:/etc/udev/rules.d # scanimage -L device `hp:/dev/sg3' is a Hewlett-Packard C7670A flatbed scanner djunix:/etc/udev/rules.d # lscsci -L [2:0:6:0] process HP C7670A 3925 - device_blocked=0 iocounterbits=32 iodone_cnt=0x424 ioerr_cnt=0x1 iorequest_cnt=0x424 queue_depth=2 queue_type=none scsi_level=3 state=running timeout=0 type=3 djunix:/etc/udev/rules.d # lsscsi -g [0:0:9:0] tape HP Ultrium 1-SCSI N26D /dev/st0 /dev/sg0 [0:0:15:0] disk FUJITSU MAW3300NP 0104 /dev/sda /dev/sg1 [1:0:3:0] cd/dvd PLEXTOR CD-ROM PX-40TS 1.13 /dev/sr0 /dev/sg2 [2:0:6:0] process HP C7670A 3925 - /dev/sg3 [3:0:0:0] cd/dvd ATAPI DVD DUAL 8X4X12 B3HC /dev/sr1 /dev/sg4 djunix:/etc/udev/rules.d # sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. found SCSI processor "HP C7670A 3925" at /dev/sg3 # Your SCSI scanner was detected. It may or may not be supported by SANE. Try # scanimage -L and read the backend's manpage. # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. djunix:/etc/udev/rules.d # getfacl /dev/sg3 getfacl: Entferne führende '/' von absoluten Pfadnamen # file: dev/sg3 # owner: root # group: lp user::rw- user:fred:rw- group::rw- mask::rw- other::r-- djunix:/etc/udev/rules.d # la /dev/sg3 crw-rw-r--+ 1 root lp 21, 3 26. Mär 14:16 /dev/sg3 All those data after adapting 55-libsane.rules. Take care Dieter -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c20 --- Comment #20 from Dieter Jurzitza 2011-03-26 14:11:03 UTC --- Created an attachment (id=421547) --> (http://bugzilla.novell.com/attachment.cgi?id=421547) Patch against new version of libsane This patch encorporates the required changes in order to set the permissions for scanners promoting themselves as processor accordingly. All "ATTR" - entries within the scsi-section have to be changed into "ATTRS" entries. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c22 --- Comment #22 from Axel Braun 2011-03-26 20:58:49 UTC --- Results for me: axel@northpole:~> scanimage -L device `epson:/dev/sg0' is a Epson GT-7000 flatbed scanner axel@northpole:~> lsscsi -L [0:0:5:0] process EPSON SCANNER GT-7000 1.14 - device_blocked=0 iocounterbits=32 iodone_cnt=0x36 ioerr_cnt=0x2 iorequest_cnt=0x36 queue_depth=1 queue_type=none scsi_level=3 state=running timeout=0 type=3 .and the patch from comment #20 works for me. Thanks! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c24 --- Comment #24 from Dieter Jurzitza 2011-03-27 07:34:42 UTC --- Created an attachment (id=421576) --> (http://bugzilla.novell.com/attachment.cgi?id=421576) Correct the package-build for SCSI-scanners of all kind This is a replacement for the original spec-file that fixes the udev-permission issue during build process. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c Johannes Meixner changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #421546|0 |1 is obsolete| | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c26 --- Comment #26 from Dieter Jurzitza 2011-03-29 19:18:01 UTC --- Hi Johannes, so, I tested HP 6300C on both USB and SCSI interfaces - working. Mustek 12000SP on SCSI interface - working. You've got it made. And you sed - trick is significantly better than mine :-)

From my point of view, an update could be triggered.

@Axel, would be so kind to give the latest release a try? Thanks, take care Dieter -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c28 --- Comment #28 from Marcus Meissner 2011-03-30 11:31:38 UTC --- looks good to me +1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c30 --- Comment #30 from Johannes Meixner 2011-03-30 13:08:35 UTC --- Two independent testers is a two times "thicker" test base than usual! I will wait for Axel Braun's feedback. Of course I would do more bugfixing if Axel Braun's feedback was negative. Nevertheless at the asme time our openSUSE maintenance team can decide whether or not they would like to have such a bugfix update in general. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c32 Swamp Workflow Management changed: What |Removed |Added ---------------------------------------------------------------------------- Status Whiteboard| |maint:running:39785:low --- Comment #32 from Swamp Workflow Management 2011-03-30 15:47:11 UTC --- The SWAMPID for this issue is 39785. This issue was rated as low. Please submit fixed packages until 2011-04-27. Also create a patchinfo file using this link: https://swamp.suse.de/webswamp/wf/39785 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c34 Johannes Meixner changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Version|Factory |Final Resolution| |FIXED --- Comment #34 from Johannes Meixner 2011-04-05 14:19:03 UTC --- Fixed package sane-backends submitted to openSUSE:11.4:Update:Test via submitrequest 66107 and patchinfo provided via https://swamp.suse.de/webswamp/wf/39785 For me the issue in now FIXED. Nevertheless it may take a while until sane-backends update packages for openSUSE 11.4 really appear under openSUSE:11.4:Update. I.e. when this bug report is set to "FIXED" it does not mean that sane-backends update packages are already available. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c36 Swamp Workflow Management changed: What |Removed |Added ---------------------------------------------------------------------------- Status Whiteboard|maint:running:39785:low |maint:running:39785:low | |maint:released:11.4:39980 --- Comment #36 from Swamp Workflow Management 2011-04-12 12:33:47 UTC --- Update released for: sane-backends, sane-backends-autoconfig, sane-backends-debuginfo, sane-backends-debugsource, sane-backends-devel Products: openSUSE 11.4 (debug, i586, x86_64) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c37 --- Comment #37 from Bernhard Wiedemann 2011-04-28 13:57:25 CEST --- This is an autogenerated message for OBS integration: This bug (681146) was mentioned in https://build.opensuse.org/request/show/66107 https://build.opensuse.org/request/show/66244 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c39 --- Comment #39 from Dieter Jurzitza 2011-09-13 19:43:06 UTC --- Hi Terje, please issue the command lsscsi -g and post the output. I bet your scanner promotes itself as "processor" and needs a separate entry in the udev-rules file of sane-backends. Seing the output of lsscsi -g I'm quite sure to be able to help you. Easiest (in order to prevent typos) is to do a lsscsi -g > out and attach out here to the bug. Take care Dieter -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c41 --- Comment #41 from Terje J. Hanssen 2011-09-13 20:31:07 UTC --- Hi Dieter, Yes, thanks, here are the output of the commands: On openSUSE 11.4 x86_64 Tumbleweed: terje@linux-tiik:~> lsscsi -g [0:0:0:0] disk ATA ST3500418AS CC38 /dev/sda /dev/sg0 [2:0:0:0] disk ATA ST3500418AS CC38 /dev/sdb /dev/sg1 [3:0:0:0] cd/dvd HL-DT-ST BD-RE BH10LS30 1.00 /dev/sr0 /dev/sg2 [10:0:6:0] disk MAXTOR ATLASU320_36_WLS B120 /dev/sdc /dev/sg3 [11:0:2:0] process EPSON Perfection1640 1.03 - /dev/sg4 ---------- sane-find-scanner as normal user doesn't find the scanner, I have to run it with root access and then it find the scanner as shown below: terje@linux-tiik:~> sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/005/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/005/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/005/002: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/005/002: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/006/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/006/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/007/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/007/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/008/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/008/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/009/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/009/001: Permission denied. libusb requires write access to USB device nodes. # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. --------------- terje@linux-tiik:~> su - Passord: linux-tiik:~ # sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. found SCSI processor "EPSON Perfection1640 1.03" at /dev/sg4 # Your SCSI scanner was detected. It may or may not be supported by SANE. Try # scanimage -L and read the backend's manpage. # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. -------------------------- I also tested the same on the current 12.1 x86_64 M5 in dualboot on the same machine, and got the same scanner access issue. Terje -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c43 --- Comment #43 from Dieter Jurzitza 2011-09-13 20:50:59 UTC --- Created an attachment (id=450545) --> (http://bugzilla.novell.com/attachment.cgi?id=450545) Patch to add support for EPSON 1640 SCSI-scanner This is an attempt to include support for the EPSON 1640 scanner into sane, which promotes itself as "processor", too and hence needs a separate entry line within /etc/udev/rules.d/55-libsane.rules -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c45 --- Comment #45 from Terje J. Hanssen 2011-09-13 22:29:29 UTC --- Created an attachment (id=450561) --> (http://bugzilla.novell.com/attachment.cgi?id=450561) xsane error messages -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c47 --- Comment #47 from Dieter Jurzitza 2011-09-14 05:55:04 UTC --- Hi Terje, both additional issues you rose yesterday regarding image scan and xsane are not related to this bug (scsi permissions). Please try to find out on the website of xsane, on the net, what about icm profiles handling on linux. The issue with the icon of image scan - well - I do not know whether or not image scan is a proprietary software or whether it is free and who is setting up the installation package. If you think both issues should be addressed by openSUSE, you are free to open related bug reports - for each one. But please do not mix different bugs into one report as you did. This will end in a mess. I will take care for openSUSE folks (and sane folks) to fix the permission issue with your scanner. It would be of help if you could provide the "regular" (sales) name of the scanner here so the comments could be beautified somewhat. Moreover - just for validation - what does ls -l /dev/sg4 tell now (given /dev/sg4 would be you scanner's device file)? Thank you! Take care Dieter -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c49 --- Comment #49 from Terje J. Hanssen 2011-09-14 13:15:10 UTC --- Hi Dieter, Thank you for fixing the scsi permission here. I wonder if this won't be done automatically in the future for such scsi scanners, which mostly has worked automatically in previous SUSE versions after setup with YaST2>Scanner (?) The regular (sales) names for these now old but still well quality working "home office" scanners (scsi and usb1) are: 1) Epson Perfection 1640SU Scanner (Flatbed scanner) 2) Epson Perfection 1640SU OFFICE Scanner (w/Automatic Document Feeder - ADF) 3) Epson Perfection 1640SU PHOTO Scanner (w/Photo adapter option instead of ADF) http://www.epson.com/cgi-bin/Store/ProductQuickSpec.jsp?oid=32724&category= Refere also to the linked scanner/Linux driver list from Avasys in #44 above. In my case I have 2) and can easy replace the ADF with the Photo adapter option. Listing sg4 here on 12.1 M5 (and identical on 11.4 TW): ~> ls -la /dev/sg4 crw-rw-r--+ 1 root lp 21, 4 sep. 14 12:16 /dev/sg4 Regarding the xsane and iscan scanner applications, this wasn't quite unexpected for me ;) As xsane looks to work properly on 12,1 M5, I won't mess with a bug report for this error message on 11.4 TW, and as iscan works properly on both platforms. As a curiosity I can mentione that the propriarity iscan drivers (with the front-end application that utilize all scanner features) are included on my old openSUSE 10.2 DVD and on SUSE Linux 9.x Professional before that. One day I might notice Avasys regarding the missing iscan program icon :) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c51 --- Comment #51 from Dieter Jurzitza 2011-09-15 04:33:07 UTC --- Created an attachment (id=450862) --> (http://bugzilla.novell.com/attachment.cgi?id=450862) Patch for epson.desc This is the real fix for epson.desc. I expect more epson scanners with both USB and SCSI interface to miss such an entry; however cannot test. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=681146 https://bugzilla.novell.com/show_bug.cgi?id=681146#c53 Johannes Meixner changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Component|Other |Other Version|Final |Factory Resolution| |FIXED Product|openSUSE 11.4 |openSUSE 12.1 --- Comment #53 from Johannes Meixner 2011-09-29 15:45:12 UTC --- Fixed sane-backends in the OBS project "graphics" (where it is available for openSUSE 11.3, 11.4 and Factory) and submitted this to openSUSE:Factory via submitrequest 85487 The RPM changelog entry is: ----------------------------------------------------------------------- - Added an entry for "SCSI processor EPSON Perfection1640" to libsane.rules (bnc#681146) see in particular https://bugzilla.novell.com/show_bug.cgi?id=681146#c43 - Added a wildcard entry for any "SCSI processor EPSON SCANNER*" to libsane.rules see the "55-libsane.rules"/"Device recognition" mail thread in June 2011 on sane-devel@lists.alioth.debian.org ----------------------------------------------------------------------- Regarding the wildcard entry for "SCSI processor EPSON SCANNER*" see http://lists.alioth.debian.org/pipermail/sane-devel/2011-June/028739.html and subsequent comments e.g. http://lists.alioth.debian.org/pipermail/sane-devel/2011-June/028749.html The change is in the tools/sane-desc.c source file. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.