[Bug 1123525] New: Errors during boot of updated system on Raspberry Pi 2
![](https://seccdn.libravatar.org/avatar/3035b38ff33cf86f480bb169b8500b80.jpg?s=120&d=mm&r=g)
http://bugzilla.opensuse.org/show_bug.cgi?id=1123525 Bug ID: 1123525 Summary: Errors during boot of updated system on Raspberry Pi 2 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: armv7 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening@forge.provo.novell.com Reporter: freek@opensuse.org QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- On the Raspberry Pi 2 I use Leap 15.0 which is fully updated. During boot I see the following (error) messages on the console: Failed (-5) In: serial Out: vidconsole Err: vidconsole Net: No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... error in inquiry 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found EFI removable media binary efi/boot/bootarm.efi libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk mmc@7e202000.blk... Found 4 disks 544256 bytes read in 25 ms (20.8 MiB/s) libfdt fdt_check_header(): FDT_ERR_BADMAGIC ## Starting EFI application at 01000000 ... Welcome to GRUB! error: file `/boot/grub2/fonts/unicode.pf2' not found. Welcome to openSUSE Leap 15.0 dracut-044-lp150.14.12.1 (Initramfs)! [ other messages ...] [ OK ] Started Load Kernel Modules. [FAILED] Failed to start Setup Virtual Console. See 'systemctl status systemd-vconsole-setup.service' for details. [DEPEND] Dependency failed for dracut ask for additional cmdline parameters. -- You are receiving this mail because: You are on the CC list for the bug.
![](https://seccdn.libravatar.org/avatar/3035b38ff33cf86f480bb169b8500b80.jpg?s=120&d=mm&r=g)
http://bugzilla.opensuse.org/show_bug.cgi?id=1123525
http://bugzilla.opensuse.org/show_bug.cgi?id=1123525#c1
--- Comment #1 from Freek de Kruijf
![](https://seccdn.libravatar.org/avatar/3035b38ff33cf86f480bb169b8500b80.jpg?s=120&d=mm&r=g)
http://bugzilla.opensuse.org/show_bug.cgi?id=1123525
http://bugzilla.opensuse.org/show_bug.cgi?id=1123525#c20
Freek de Kruijf
(In reply to Freek de Kruijf from comment #16)
I am sorry this was the wrong file, not from the Raspberry Pi 2. The correct one is attached now.
Ok, reopening.
# rpm -qf /usr/share/kbd/keymaps/xkb/us.map.gz kbd-2.0.4-lp150.6.2.armv7hl # lsinitrd | grep '\.map' -rw-r--r-- 1 root root 249 May 8 2018 usr/share/kbd/keymaps/legacy/i386/include/euro1.map -rw-r--r-- 1 root root 2004 May 8 2018 usr/share/kbd/keymaps/legacy/i386/qwerty/us.map -rw-r--r-- 1 root root 121059 May 8 2018 usr/share/kbd/keymaps/xkb/us.map # more /etc/vconsole.conf KEYMAP=us.map.gz rpi2150hon:~ #
Please remove the .gz suffix from the keymap name, otherwise systemd-vconsole-setup will fail:
When I change the above to KEYMAP=us.map I get an error message: jan 15 11:05:22 rpi2150hon systemd-vconsole-setup[160]: /usr/bin/loadkeys failed with error code 1. jan 15 11:05:22 rpi2150hon systemd-vconsole-setup[160]: cannot open file us.map.gz jan 15 11:05:22 rpi2150hon systemd[1]: systemd-vconsole-setup.service: Main process exited, code=exited, status=1/FAILURE jan 15 11:05:22 rpi2150hon systemd[1]: Failed to start Setup Virtual Console. jan 15 11:05:22 rpi2150hon systemd[1]: systemd-vconsole-setup.service: Unit entered failed state. So KEYMAP=us.map.gz seems OK. -- You are receiving this mail because: You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply@novell.com