https://bugzilla.novell.com/show_bug.cgi?id=373146
User jep@obrien-pifer.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=373146#c4
Summary: Internal Card Reader does not function on HP Compaq
8710w
Product: openSUSE 10.3
Version: Final
Platform: HP
OS/Version: openSUSE 10.3
Status: NEW
Severity: Normal
Priority: P5 - None
Component: Kernel
AssignedTo: kernel-maintainers@forge.provo.novell.com
ReportedBy: jep@obrien-pifer.com
QAContact: qa@suse.de
Found By: Customer
I have an HP Compaq 8710w with an internal card reader.
The card reader does not recognize any SD cards. I have worked with the
opensuse mailing list and it was suggested I create a bug report by Frank
Seidel.
Thanks,
James
My kernel line is:
kernel /boot/vmlinuz-2.6.22.17-0.1-default
root=/dev/disk/by-id/scsi-SATA_ST9120823AS_5NJ061KV-part2 vga=0x314
resume=/dev/sda1 splash=silent showopts irqpoll pci=routeirq
Here's an lspci:
# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root
Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network
Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1
(rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2
(rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5
(rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface
Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE
Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA
AHCI Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Quadro FX 1600M (rev a1)
02:06.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b9)
02:06.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b9)
02:06.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 03)
02:06.3 Generic system peripheral [Class 0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter (rev 20)
02:06.4 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 10)
02:06.5 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter
(rev 10)
02:06.6 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 10)
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN
Network Connection (rev 61)
Here's dmesg:
Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE
Linux)) #1 SMP 2008/02/10 20:01:04 UTC
Command line: root=/dev/disk/by-id/scsi-SATA_ST9120823AS_5NJ061KV-part2
vga=0x314 resume=/dev/sda1 splash=silent irqpoll pci=routeirq
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved)
BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS)
BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 786352) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
end_pfn_map = 1310720
DMI 2.4 present.
ACPI: RSDP 000F7850, 0024 (r2 HP )
ACPI: XSDT BFFC81C4, 0074 (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: FACP BFFC8084, 00F4 (r4 HP 30C3 3 HP 1)
ACPI: DSDT BFFC84C0, 13E9E (r1 HP nc65xx 10000 MSFT 3000001)
ACPI: FACS BFFE7D80, 0040
ACPI: SLIC BFFC8238, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: HPET BFFC83B0, 0038 (r1 HP 30C3 1 HP 1)
ACPI: APIC BFFC83E8, 0068 (r1 HP 30C3 1 HP 1)
ACPI: MCFG BFFC8450, 003C (r1 HP 30C3 1 HP 1)
ACPI: TCPA BFFC848C, 0032 (r2 HP 30C3 1 HP 1)
ACPI: SSDT BFFDC35E, 0328 (r1 HP HPQSAT 1 MSFT 3000001)
ACPI: SSDT BFFDCF0C, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
ACPI: SSDT BFFDD16B, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317)
ACPI: SSDT BFFDD211, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 786352) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
Bootmem setup node 0 0000000000000000-0000000140000000
No mptable found.
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1310720
early_node_map[3] active PFN ranges
0: 0 -> 159
0: 256 -> 786352
0: 1048576 -> 1310720
On node 0 totalpages: 1048399
DMA zone: 56 pages used for memmap
DMA zone: 1271 pages reserved
DMA zone: 2672 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767976 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000bffb0000 - 00000000bffc5000
swsusp: Registered nosave memory region: 00000000bffc5000 - 00000000bffc6000
swsusp: Registered nosave memory region: 00000000bffc6000 - 00000000bffe7000
swsusp: Registered nosave memory region: 00000000bffe7000 - 00000000bffe8000
swsusp: Registered nosave memory region: 00000000bffe8000 - 00000000c0000000
swsusp: Registered nosave memory region: 00000000c0000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fed20000
swsusp: Registered nosave memory region: 00000000fed20000 - 00000000fed9a000
swsusp: Registered nosave memory region: 00000000fed9a000 - 00000000feda0000
swsusp: Registered nosave memory region: 00000000feda0000 - 00000000fedc0000
swsusp: Registered nosave memory region: 00000000fedc0000 - 00000000fee00000
swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000
swsusp: Registered nosave memory region: 00000000ffb00000 - 00000000ffc00000
swsusp: Registered nosave memory region: 00000000ffc00000 - 00000000fff00000
swsusp: Registered nosave memory region: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 50296 bytes of per cpu data
Built 1 zonelists. Total pages: 1029208
Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST9120823AS_5NJ061KV-part2
vga=0x314 resume=/dev/sda1 splash=silent irqpoll pci=routeirq
bootsplash: silent mode.
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
time.c: Detected 2194.499 MHz processor.
Console: colour dummy device 80x25
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1045000 - 0x5045000
Memory: 4046196k/5242880k available (2053k kernel code, 147400k reserved, 1017k
data, 316k init)
Calibrating delay using timer specific routine.. 4505.52 BogoMIPS (lpj=9011040)
Security Framework v1.0.0 initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring handled by SMI
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4377k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 1465 Objects with 125 Devices 481 Methods 44 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 17 Objects with 4 Devices 5 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
result 12468744
Detected 12.468 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4389.08 BogoMIPS (lpj=8778166)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=15
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int
0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 6 Runtime GPEs
in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package
initialization:.......................................................................................................................................................................................
Initialized 35/44 Regions 0/0 Fields 71/72 Buffers 77/92 Packages (1516 nodes)
Initializing Device/Processor/Thermal objects by executing _INI
methods:.........
Executed 9 _INI methods requiring 3 _STA executions (examined 139 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C003] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1100-113f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C142] (IRQs 10 *11)
ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
ACPI: Power Resource [C240] (on)
ACPI: Power Resource [C25C] (on)
ACPI: Power Resource [C181] (off)
ACPI: Power Resource [C367] (off)
ACPI: Power Resource [C36A] (off)
ACPI: Power Resource [C36B] (off)
ACPI: Power Resource [C36C] (off)
ACPI: Power Resource [C36D] (off)
ACPI: Power Resource [C36E] (off)
ACPI: Power Resource [C386] (off)
ACPI: Power Resource [C387] (off)
ACPI: Power Resource [C388] (off)
ACPI: Power Resource [C389] (off)
ACPI: Power Resource [C38A] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:02:06.3[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:02:06.4[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:02:06.5[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:02:06.6[B] -> GSI 19 (level, low) -> IRQ 19
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0xbfffffff could not be reserved
pnp: 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0d: ioport range 0x1000-0x107f has been reserved
pnp: 00:0d: ioport range 0x1100-0x113f has been reserved
pnp: 00:0d: ioport range 0x1200-0x121f has been reserved
pnp: 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
pnp: 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
pnp: 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
pnp: 00:0e: iomem range 0xcd200-0xcffff has been reserved
pnp: 00:0e: iomem range 0xd2000-0xd3fff has been reserved
pnp: 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved
pnp: 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 4000-4fff
MEM window: e5000000-e7ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: e4000000-e40fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
Time: tsc clocksource has been installed.
IO window: 2000-3fff
MEM window: e0000000-e3ffffff
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00001400-000014ff
IO window: 00001800-000018ff
PREFETCH window: c4000000-c7ffffff
MEM window: c8000000-cbffffff
PCI: Bus 4, cardbus bridge: 0000:02:06.1
IO window: 00001c00-00001cff
IO window: 00005400-000054ff
PREFETCH window: cc000000-cfffffff
MEM window: ec000000-efffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: e4100000-e43fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1206031646.788:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
vesafb: framebuffer at 0xe7000000, mapped to 0xffffc20001480000, using 3750k,
total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78734 bytes
bootsplash: ...found (800x600, 27773 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:C259,PNP0f13:C25A] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 1
Freeing unused kernel memory: 316k freed
ACPI: SSDT BFFDC74E, 027F (r1 HP Cpu0Ist 3000 INTL 20060317)
Parsing all Control Methods:
Table [SSDT](id 0065) - 6 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT BFFDCA52, 04BA (r1 HP Cpu0Cst 3001 INTL 20060317)
Parsing all Control Methods:
Table [SSDT](id 0066) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BFFDC686, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
Parsing all Control Methods:
Table [SSDT](id 006D) - 4 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT BFFDC9CD, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
Parsing all Control Methods:
Table [SSDT](id 006E) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Transitioning device [C372] to D0
Marking TSC unstable due to possible TSC halt in C2
ACPI: Transitioning device [C372] to D0
ACPI: Unable to turn cooling device [ffff81013ab7d330] 'on'
ACPI: Transitioning device [C373] to D0
ACPI: Transitioning device [C373] to D0
ACPI: Unable to turn cooling device [ffff81013ab7d2b0] 'on'
ACPI: Thermal Zone [TZ2] (58 C)
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [TZ0] (50 C)
ACPI: Thermal Zone [TZ1] (52 C)
ACPI: Thermal Zone [TZ3] (43 C)
ACPI: Thermal Zone [TZ4] (32 C)
ACPI: Thermal Zone [TZ5] (70 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 21 (level, low) -> IRQ 21
ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
input: AT Translated Set 2 keyboard as /class/input/input2
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc2000145e100 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4347
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST9120823AS, 3.BHC, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST9120823AS 3.BH PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata2: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
0x00000000000150c0 irq 14
ata3: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
0x00000000000150c8 irq 15
ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0A17, max MWDMA2
ata2.00: configured for MWDMA2
ata3: port disabled. ignoring.
scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M 0A17 PQ: 0 ANSI: 5
ACPI: Transitioning device [C36F] to D3
ACPI: Transitioning device [C36F] to D3
ACPI: Fan [C36F] (off)
ACPI: Transitioning device [C370] to D3
ACPI: Transitioning device [C370] to D3
ACPI: Fan [C370] (off)
ACPI: Transitioning device [C371] to D3
ACPI: Transitioning device [C371] to D3
ACPI: Fan [C371] (off)
ACPI: Transitioning device [C372] to D3
ACPI: Transitioning device [C372] to D3
ACPI: Fan [C372] (off)
ACPI: Transitioning device [C373] to D3
ACPI: Transitioning device [C373] to D3
ACPI: Fan [C373] (off)
ACPI: Transitioning device [C374] to D3
ACPI: Transitioning device [C374] to D3
ACPI: Fan [C374] (off)
ACPI: Transitioning device [C38B] to D3
ACPI: Transitioning device [C38B] to D3
ACPI: Fan [C38B] (off)
ACPI: Transitioning device [C38C] to D3
ACPI: Transitioning device [C38C] to D3
ACPI: Fan [C38C] (off)
ACPI: Transitioning device [C38D] to D3
ACPI: Transitioning device [C38D] to D3
ACPI: Fan [C38D] (off)
ACPI: Transitioning device [C38E] to D3
ACPI: Transitioning device [C38E] to D3
ACPI: Fan [C38E] (off)
ACPI: Fan [C38F] (on)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005020
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005040
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8021000
usb 1-1: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.7
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8028000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
input: PS/2 Generic Mouse as /class/input/input3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005060
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005080
usb usb6: new device found, idVendor=0000, idProduct=0000
usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050a0
usb usb7: new device found, idVendor=0000, idProduct=0000
usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 3
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Marking nosave pages: 00000000bffb0000 - 0000000100000000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 1-1: new device found, idVendor=03f0, idProduct=171d
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: HP Integrated Module
usb 1-1: Manufacturer: Broadcom Corp
usb 1-1: configuration #1 chosen from 1 choice
usb 5-2: new full speed USB device using uhci_hcd and address 2
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 5-2: new device found, idVendor=08ff, idProduct=2580
usb 5-2: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: Fingerprint Sensor
usb 5-2: configuration #1 chosen from 1 choice
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [C27B]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [C1FD]
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0s
iwl4965: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:10:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
ACPI: AC Adapter [C1F7] (on-line)
Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
Copyright (c) 1999-2007 Intel Corporation.
ACPI: Battery Slot [C1F9] (battery present)
ACPI: Battery Slot [C1F8] (battery absent)
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:07 failed with error -16
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:19.0 to 64
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:1b:38:82:75:34
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c3]
iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
wmaster0: Selected rate control algorithm 'iwl-4965-rs'
Yenta: ISA IRQ mask 0x0438, PCI irq 18
Socket status: 30000006
pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
Yenta: CardBus bridge found at 0000:02:06.1 [103c:30c3]
Yenta: ISA IRQ mask 0x0000, PCI irq 19
nvidia: module license 'NVIDIA' taints kernel.
Socket status: 30000810
Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07
pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[e4102000-e41027ff]
Max Packet=[2048] IR/IT contexts=[4/4]
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST
2008
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:02:06.3 [1180:0822] (rev 20)
ACPI: PCI Interrupt 0000:02:06.3[B] -> GSI 19 (level, low) -> IRQ 19
mmc0: SDHCI at 0xe4103000 irq 19 DMA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
pccard: PCMCIA card inserted into slot 1
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff
pcmcia: registering new device pcmcia1.0
Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929f1330e]
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
AppArmor: AppArmor initialized
audit(1206031662.217:2): type=1505 info="AppArmor initialized" pid=2442
IA-32 Microcode Update Driver: v1.14a