https://bugzilla.novell.com/show_bug.cgi?id=373146 User jep@obrien-pifer.com added comment https://bugzilla.novell.com/show_bug.cgi?id=373146#c4 Summary: Internal Card Reader does not function on HP Compaq 8710w Product: openSUSE 10.3 Version: Final Platform: HP OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: jep@obrien-pifer.com QAContact: qa@suse.de Found By: Customer I have an HP Compaq 8710w with an internal card reader. The card reader does not recognize any SD cards. I have worked with the opensuse mailing list and it was suggested I create a bug report by Frank Seidel. Thanks, James My kernel line is: kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/disk/by-id/scsi-SATA_ST9120823AS_5NJ061KV-part2 vga=0x314 resume=/dev/sda1 splash=silent showopts irqpoll pci=routeirq Here's an lspci: # lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03) 01:00.0 VGA compatible controller: nVidia Corporation Quadro FX 1600M (rev a1) 02:06.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b9) 02:06.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b9) 02:06.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 03) 02:06.3 Generic system peripheral [Class 0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 20) 02:06.4 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 10) 02:06.5 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 10) 02:06.6 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 10) 10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61) Here's dmesg: Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC Command line: root=/dev/disk/by-id/scsi-SATA_ST9120823AS_5NJ061KV-part2 vga=0x314 resume=/dev/sda1 splash=silent irqpoll pci=routeirq BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved) BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS) BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 786352) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used end_pfn_map = 1310720 DMI 2.4 present. ACPI: RSDP 000F7850, 0024 (r2 HP ) ACPI: XSDT BFFC81C4, 0074 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: FACP BFFC8084, 00F4 (r4 HP 30C3 3 HP 1) ACPI: DSDT BFFC84C0, 13E9E (r1 HP nc65xx 10000 MSFT 3000001) ACPI: FACS BFFE7D80, 0040 ACPI: SLIC BFFC8238, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: HPET BFFC83B0, 0038 (r1 HP 30C3 1 HP 1) ACPI: APIC BFFC83E8, 0068 (r1 HP 30C3 1 HP 1) ACPI: MCFG BFFC8450, 003C (r1 HP 30C3 1 HP 1) ACPI: TCPA BFFC848C, 0032 (r2 HP 30C3 1 HP 1) ACPI: SSDT BFFDC35E, 0328 (r1 HP HPQSAT 1 MSFT 3000001) ACPI: SSDT BFFDCF0C, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) ACPI: SSDT BFFDD16B, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) ACPI: SSDT BFFDD211, 04D7 (r1 HP CpuPm 3000 INTL 20060317) No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 786352) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000140000000 No mptable found. Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1310720 early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 786352 0: 1048576 -> 1310720 On node 0 totalpages: 1048399 DMA zone: 56 pages used for memmap DMA zone: 1271 pages reserved DMA zone: 2672 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767976 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000bffb0000 - 00000000bffc5000 swsusp: Registered nosave memory region: 00000000bffc5000 - 00000000bffc6000 swsusp: Registered nosave memory region: 00000000bffc6000 - 00000000bffe7000 swsusp: Registered nosave memory region: 00000000bffe7000 - 00000000bffe8000 swsusp: Registered nosave memory region: 00000000bffe8000 - 00000000c0000000 swsusp: Registered nosave memory region: 00000000c0000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000 swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fed20000 swsusp: Registered nosave memory region: 00000000fed20000 - 00000000fed9a000 swsusp: Registered nosave memory region: 00000000fed9a000 - 00000000feda0000 swsusp: Registered nosave memory region: 00000000feda0000 - 00000000fedc0000 swsusp: Registered nosave memory region: 00000000fedc0000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 swsusp: Registered nosave memory region: 00000000ffb00000 - 00000000ffc00000 swsusp: Registered nosave memory region: 00000000ffc00000 - 00000000fff00000 swsusp: Registered nosave memory region: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 50296 bytes of per cpu data Built 1 zonelists. Total pages: 1029208 Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST9120823AS_5NJ061KV-part2 vga=0x314 resume=/dev/sda1 splash=silent irqpoll pci=routeirq bootsplash: silent mode. Misrouted IRQ fixup and polling support enabled This may significantly impact system performance Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 time.c: Detected 2194.499 MHz processor. Console: colour dummy device 80x25 Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x1045000 - 0x5045000 Memory: 4046196k/5242880k available (2053k kernel code, 147400k reserved, 1017k data, 316k init) Calibrating delay using timer specific routine.. 4505.52 BogoMIPS (lpj=9011040) Security Framework v1.0.0 initialized Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring handled by SMI SMP alternatives: switching to UP code Unpacking initramfs... done Freeing initrd memory: 4377k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 1465 Objects with 125 Devices 481 Methods 44 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 17 Objects with 4 Devices 5 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Using local APIC timer interrupts. result 12468744 Detected 12.468 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4389.08 BogoMIPS (lpj=8778166) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=15 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 6 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:....................................................................................................................................................................................... Initialized 35/44 Regions 0/0 Fields 71/72 Buffers 77/92 Packages (1516 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:......... Executed 9 _INI methods requiring 3 _STA executions (examined 139 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [C003] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1100-113f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C140] (IRQs *10 11) ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C142] (IRQs 10 *11) ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126] ACPI: Power Resource [C240] (on) ACPI: Power Resource [C25C] (on) ACPI: Power Resource [C181] (off) ACPI: Power Resource [C367] (off) ACPI: Power Resource [C36A] (off) ACPI: Power Resource [C36B] (off) ACPI: Power Resource [C36C] (off) ACPI: Power Resource [C36D] (off) ACPI: Power Resource [C36E] (off) ACPI: Power Resource [C386] (off) ACPI: Power Resource [C387] (off) ACPI: Power Resource [C388] (off) ACPI: Power Resource [C389] (off) ACPI: Power Resource [C38A] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 21 (level, low) -> IRQ 21 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 20 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:02:06.3[B] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:02:06.4[B] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:02:06.5[B] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:02:06.6[B] -> GSI 19 (level, low) -> IRQ 19 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:00: iomem range 0x100000-0xbfffffff could not be reserved pnp: 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0d: ioport range 0x1000-0x107f has been reserved pnp: 00:0d: ioport range 0x1100-0x113f has been reserved pnp: 00:0d: ioport range 0x1200-0x121f has been reserved pnp: 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved pnp: 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved pnp: 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved pnp: 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved pnp: 00:0e: iomem range 0xcd200-0xcffff has been reserved pnp: 00:0e: iomem range 0xd2000-0xd3fff has been reserved pnp: 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved pnp: 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: 4000-4fff MEM window: e5000000-e7ffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: e4000000-e40fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 Time: tsc clocksource has been installed. IO window: 2000-3fff MEM window: e0000000-e3ffffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00001400-000014ff IO window: 00001800-000018ff PREFETCH window: c4000000-c7ffffff MEM window: c8000000-cbffffff PCI: Bus 4, cardbus bridge: 0000:02:06.1 IO window: 00001c00-00001cff IO window: 00005400-000054ff PREFETCH window: cc000000-cfffffff MEM window: ec000000-efffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: e4100000-e43fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 12582912 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1206031646.788:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] vesafb: framebuffer at 0xe7000000, mapped to 0xffffc20001480000, using 3750k, total 14336k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 78734 bytes bootsplash: ...found (800x600, 27773 bytes, v3). Console: switching to colour frame buffer device 96x33 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:C259,PNP0f13:C25A] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 1 Freeing unused kernel memory: 316k freed ACPI: SSDT BFFDC74E, 027F (r1 HP Cpu0Ist 3000 INTL 20060317) Parsing all Control Methods: Table [SSDT](id 0065) - 6 Objects with 0 Devices 4 Methods 0 Regions ACPI: SSDT BFFDCA52, 04BA (r1 HP Cpu0Cst 3001 INTL 20060317) Parsing all Control Methods: Table [SSDT](id 0066) - 1 Objects with 0 Devices 1 Methods 0 Regions Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT BFFDC686, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) Parsing all Control Methods: Table [SSDT](id 006D) - 4 Objects with 0 Devices 4 Methods 0 Regions ACPI: SSDT BFFDC9CD, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) Parsing all Control Methods: Table [SSDT](id 006E) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Transitioning device [C372] to D0 Marking TSC unstable due to possible TSC halt in C2 ACPI: Transitioning device [C372] to D0 ACPI: Unable to turn cooling device [ffff81013ab7d330] 'on' ACPI: Transitioning device [C373] to D0 ACPI: Transitioning device [C373] to D0 ACPI: Unable to turn cooling device [ffff81013ab7d2b0] 'on' ACPI: Thermal Zone [TZ2] (58 C) Time: hpet clocksource has been installed. ACPI: Thermal Zone [TZ0] (50 C) ACPI: Thermal Zone [TZ1] (52 C) ACPI: Thermal Zone [TZ3] (43 C) ACPI: Thermal Zone [TZ4] (32 C) ACPI: Thermal Zone [TZ5] (70 C) SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 21 (level, low) -> IRQ 21 ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci ata1: SATA max UDMA/133 cmd 0xffffc2000145e100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4347 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120823AS, 3.BHC, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120823AS 3.BH PQ: 0 ANSI: 5 ata_piix 0000:00:1f.1: version 2.11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi1 : ata_piix scsi2 : ata_piix ata2: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000150c0 irq 14 ata3: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000150c8 irq 15 ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0A17, max MWDMA2 ata2.00: configured for MWDMA2 ata3: port disabled. ignoring. scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M 0A17 PQ: 0 ANSI: 5 ACPI: Transitioning device [C36F] to D3 ACPI: Transitioning device [C36F] to D3 ACPI: Fan [C36F] (off) ACPI: Transitioning device [C370] to D3 ACPI: Transitioning device [C370] to D3 ACPI: Fan [C370] (off) ACPI: Transitioning device [C371] to D3 ACPI: Transitioning device [C371] to D3 ACPI: Fan [C371] (off) ACPI: Transitioning device [C372] to D3 ACPI: Transitioning device [C372] to D3 ACPI: Fan [C372] (off) ACPI: Transitioning device [C373] to D3 ACPI: Transitioning device [C373] to D3 ACPI: Fan [C373] (off) ACPI: Transitioning device [C374] to D3 ACPI: Transitioning device [C374] to D3 ACPI: Fan [C374] (off) ACPI: Transitioning device [C38B] to D3 ACPI: Transitioning device [C38B] to D3 ACPI: Fan [C38B] (off) ACPI: Transitioning device [C38C] to D3 ACPI: Transitioning device [C38C] to D3 ACPI: Fan [C38C] (off) ACPI: Transitioning device [C38D] to D3 ACPI: Transitioning device [C38D] to D3 ACPI: Fan [C38D] (off) ACPI: Transitioning device [C38E] to D3 ACPI: Transitioning device [C38E] to D3 ACPI: Fan [C38E] (off) ACPI: Fan [C38F] (on) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005020 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005040 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb2: SerialNumber: 0000:00:1a.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8021000 usb 1-1: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd usb usb3: SerialNumber: 0000:00:1a.7 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8028000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd usb usb4: SerialNumber: 0000:00:1d.7 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected input: PS/2 Generic Mouse as /class/input/input3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005060 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005080 usb usb6: new device found, idVendor=0000, idProduct=0000 usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050a0 usb usb7: new device found, idVendor=0000, idProduct=0000 usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 3 swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Marking nosave pages: 00000000bffb0000 - 0000000100000000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed Attempting manual resume usb 1-1: new device found, idVendor=03f0, idProduct=171d usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: HP Integrated Module usb 1-1: Manufacturer: Broadcom Corp usb 1-1: configuration #1 chosen from 1 choice usb 5-2: new full speed USB device using uhci_hcd and address 2 kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. usb 5-2: new device found, idVendor=08ff, idProduct=2580 usb 5-2: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 5-2: Product: Fingerprint Sensor usb 5-2: configuration #1 chosen from 1 choice sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [C27B] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [C1FD] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0s iwl4965: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:10:00.0 to 64 iwl4965: Detected Intel Wireless WiFi Link 4965AGN ACPI: AC Adapter [C1F7] (on-line) Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI Copyright (c) 1999-2007 Intel Corporation. ACPI: Battery Slot [C1F9] (battery present) ACPI: Battery Slot [C1F8] (battery absent) parport_pc 00:02: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:07 failed with error -16 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1b:38:82:75:34 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c3] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels wmaster0: Selected rate control algorithm 'iwl-4965-rs' Yenta: ISA IRQ mask 0x0438, PCI irq 18 Socket status: 30000006 pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff Yenta: CardBus bridge found at 0000:02:06.1 [103c:30c3] Yenta: ISA IRQ mask 0x0000, PCI irq 19 nvidia: module license 'NVIDIA' taints kernel. Socket status: 30000810 Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07 pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 20 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[e4102000-e41027ff] Max Packet=[2048] IR/IT contexts=[4/4] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:02:06.3 [1180:0822] (rev 20) ACPI: PCI Interrupt 0000:02:06.3[B] -> GSI 19 (level, low) -> IRQ 19 mmc0: SDHCI at 0xe4103000 irq 19 DMA sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 pccard: PCMCIA card inserted into slot 1 cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff pcmcia: registering new device pcmcia1.0 Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929f1330e] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1206031662.217:2): type=1505 info="AppArmor initialized" pid=2442 IA-32 Microcode Update Driver: v1.14a audit(1206031682.608:3): audit_pid=3378 old=0 by auid=4294967295 NET: Registered protocol family 17 wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:15:e9:19:71:c8 wlan0: RX authentication from 00:15:e9:19:71:c8 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:15:e9:19:71:c8 wlan0: RX AssocResp from 00:15:e9:19:71:c8 (capab=0x431 status=0 aid=3) wlan0: associated wlan0: CTS protection enabled (BSSID=00:15:e9:19:71:c8) gtk-window-deco[3521]: segfault at 0000000000000004 rip 00002b0e020173c9 rsp 00007fffac7a7940 error 4 ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team /dev/vmmon[3846]: VMCI: Driver initialized. /dev/vmmon[3846]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[3846]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 /dev/vmmon[3846]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 /dev/vmmon[3846]: Module vmmon: initialized /dev/vmnet: open called by PID 3945 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 3962 (vmnet-dhcpd) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 3976 (vmnet-dhcpd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 3982 (vmnet-natd) /dev/vmnet: port on hub 8 successfully opened bootsplash: status on console 0 changed to on /dev/vmnet: open called by PID 4183 (vmnet-netifup) /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 4209 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened Bluetooth: HIDP (Human Interface Emulation) ver 1.2 input: Logitech MX900 Mouse as /class/input/input7 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.