- openSUSE Bugs

[Bug 202133] Xorg does not work on Pegasos PPC
by bugzilla_noreply＠novell.com 09 Sep '06

09 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=202133 pczanik(a)fang.fa.gau.hu changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|pczanik(a)fang.fa.gau.hu | ------- Comment #6 from pczanik(a)fang.fa.gau.hu 2006-09-09 03:27 MST ------- (In reply to comment #1) > The PCI domain stuff should be fixed with Alpha4. Please retest when it's > available (in about 2 weeks). > Tested with Alpha4. It still does not work. To share some good news also: for the first time ever, my monitor was set to the optimum resolution and refreshrate during installation. Please note the difference between 'lspci' and 'X -scanpci': suse102a4:~ # lspci 00:00.0 Host bridge: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller (rev 03) 00:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) 00:05.0 USB Controller: NEC Corporation USB (rev 43) 00:05.1 USB Controller: NEC Corporation USB (rev 43) 00:05.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 00:0c.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:0c.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:0c.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:0c.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:0c.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:0c.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:0c.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 20) 00:0d.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 0001:01:00.0 Host bridge: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller (rev 03) 0001:01:08.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) 0001:01:08.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01) and suse102a4:~ # X -scanpci Probing for PCI devices (Bus:Device:Function) (0:0:0) Marvell Technology Group Ltd. MV64360/64361/64362 System Controller (0:1:0) unknown card (0x1106/0x3044) using a VIA Technologies, Inc. IEEE 1394 Host Controller (0:5:0) unknown card (0x1033/0x0035) using a NEC Corporation USB (0:5:1) unknown card (0x1033/0x0035) using a NEC Corporation USB (0:5:2) unknown card (0x9710/0x1906) using a NEC Corporation USB 2.0 (0:12:0) VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (0:12:1) VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (0:12:2) unknown card (0x0925/0x1234) using a VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (0:12:3) unknown card (0x0925/0x1234) using a VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (0:12:4) VIA Technologies, Inc. VT8235 ACPI (0:12:5) VIA Technologies, Inc. VT82C686 AC97 Audio Controller (0:12:6) VIA Technologies, Inc. AC'97 Modem Controller (0:13:0) unknown card (0x3065/0x1106) using a VIA Technologies, Inc. VT6102 [Rhine-II] I'll also attach yast2 and sax2 logs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 204371] New: Yast2 just display the elements can be modified by current User.
by bugzilla_noreply＠novell.com 09 Sep '06

09 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=204371 Summary: Yast2 just display the elements can be modified by current User. Product: openSUSE 10.2 Version: Alpha 4 Platform: i686 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: linux(a)51sun.cn QAContact: jsrain(a)novell.com Yast2 just display the elements can be modified by current User. So , i need use "su" switch to root , and input "yast2". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-bugs+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-bugs+help(a)opensuse.org

1 3

[Bug 202076] GNOME does not honor X-KDE-SubstituteUID any more
by bugzilla_noreply＠novell.com 09 Sep '06

09 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=202076 andreas.hanke(a)gmx-topmail.de changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |linux(a)51sun.cn ------- Comment #2 from andreas.hanke(a)gmx-topmail.de 2006-09-09 02:14 MST ------- *** Bug 204371 has been marked as a duplicate of this bug. *** -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 198405] Internal Server Error after removing specfile
by bugzilla_noreply＠novell.com 08 Sep '06

08 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=198405 suse-beta(a)cboltz.de changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |VERIFIED ------- Comment #3 from suse-beta(a)cboltz.de 2006-09-08 17:00 MST ------- Just tested again, no longer reproducable :-) Thanks for fixing! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 192736] SDL_image-devel requirements are unversioned
by bugzilla_noreply＠novell.com 08 Sep '06

08 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=192736 ------- Comment #1 from andreas.hanke(a)gmx-topmail.de 2006-09-08 16:17 MST ------- Other packages affected by the same problem: SDL / SDL-devel SDL_gfx / SDL_gfx-devel SDL_mixer / SDL_mixer-devel SDLmm / SDLmm-devel -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 204651] New: Login problem on SuSE 9.3; possibly related to KGpg + gpg-agent
by bugzilla_noreply＠novell.com 08 Sep '06

08 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=204651 Summary: Login problem on SuSE 9.3; possibly related to KGpg + gpg-agent Product: openSUSE.org Version: unspecified Platform: i686 OS/Version: SuSE Pro 9.3 Status: NEW Severity: Major Priority: P5 - None Component: bugzilla AssignedTo: kssingvo(a)novell.com ReportedBy: zarantu(a)gmail.com QAContact: novbugzilla-bugs(a)forge.provo.novell.com CC: pnemec(a)novell.com Login (from KDM) is ok, while loading kde, (splash at stage: "restoring session") it freezes, all user procs seem stuck in stop/wait state (no zombies), must kill X (CAB), I can login with other (normaly unused) uids, and root ok ( I never clutter up my root desktop ), I can drop to init 3, login, startx, same result, mv .kde .kde-save and start fresh, loads fine, cp over my configs (except: Kgpg, Kpgp), and restart X, and it loads completely (although several panel applets, and superkaramba get left out) But ( this is whats driving me crazy ), if I exit and startx again, same problem (its adding the kgpg, kpgp config back in,, but a clean kde init does not have them, most likely its referenced from kmail, have not yet disabled gpg from within kmail, yet) Twice while testing ( adding one apps configs at a time), I got an error message stating that: GnuPG Agent is enabled, but the agent doesnt seem to be running, that I should disable it, or fix the agent. < see attachment (screenshot): kgpg-startup-error-1.jpg > !!!!!!!!!! WTF 30KB file limit on this list !!!!!!!! @$^*(^$##^&**%#^& !!!!!!!!!! Disabling the agent through KGpg's config did not fix it. On 09-05, I ran YOU, and found updates for gpg, and gpg2, but this had no effect :: > 2006-09-05 17:59:50 (16992): Installing gpg2: "gpg2: This update fixes a segmentaion fault" > 2006-09-05 17:59:44 (16992): Installing gpg: "gpg: This update fixes a segmentaion fault" I did notice that after the previous run of YOU, w/ another gpg fix, that the time frame after I had a similar ( or the same ) problem, but after trying to login a couple times, it finally worked > 2006-07-26 17:56:53 (660): Installing gpg2: "gpg2: Security update to fix crash on special crafted messages" Nothing of relevnce in system logs: > /var/log/{localmessages,XFree86.0.log,Xorg.0.0.log,Xorg.0.log,kdm.log} > /var/log/messages & /var/log/warn:: Sep 6 22:06:41 enki kdm[7907]: X server for display :0 terminated unexpectedly Sep 6 22:04:53 enki kdm_config[7908]: Unrecognized key 'Themes' in section [X-*-Greeter] at /etc/opt/ kde3/share/config/kdm/kdmrc:57 Sep 6 22:04:53 enki kdm_config[7908]: Unrecognized key 'UseLilo' in section [Shutdown] at /etc/opt/kd e3/share/config/kdm/kdmrc:15 ---- captured output of startx, but tells me nothing usefull < see attachment: startx-kde_freeze-log-1.txt > These are the files I can mv/rm and get the desktop loaded: .kde/share/config/kgpgrc .kde/share/config/kpgprc ---------- well, that is all I can think of to report, If anybody can help me fix this, I would greatly appriciate it. ---------- System Info: Dist:: SuSE Linux 9.3 (i586) en Installed : 2005-07-03 all updates current as of: 2006-09-05 : 18:00 CST / GMT -0600 Apps:: xorg-x11-server: Version: 6.8.2 Release: 30.6 Install date: Tue 08 Aug 2006 08:38:20 AM CDT kdebase3: Version: 3.4.0 Release: 28.2 Install date: Thu 25 Aug 2005 01:20:46 AM CDT gpg: Version: 1.4.0 Release: 4.8 Install date: Tue 05 Sep 2006 05:59:45 PM CDT gpg2: Version: 1.9.14 Release: 6.10 Install date: Tue 05 Sep 2006 05:59:51 PM CDT kgpg: kdeutils3: Version: 3.4.0 Release: 7 Install date: Sun 03 Jul 2005 08:53:33 AM CDT -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 1

[Bug 160899] replace sane-dev by HAL fdi file
by bugzilla_noreply＠novell.com 08 Sep '06

08 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=160899 ------- Comment #8 from suse-beta(a)cboltz.de 2006-09-08 10:57 MST ------- (In reply to comment #7) > After talking to our resmgr maintainer even more, Please talk to some bash script expert also ;-) > ----------------------------------------------------------------- > for d in /usr/share/sane/descriptions/*.desc \ > /usr/share/sane/descriptions-external/*.desc ; \ > do grep ':usbid' $d ; \ > done | sort -u > ----------------------------------------------------------------- With this I bestow you the "useless use of for loop award". Congratulations! Please use (in one line) grep -h ':usbid' /usr/share/sane/descriptions/*.desc /usr/share/sane/descriptions-external/*.desc | sort -u This does exactly the same and saves the for loop and several calls of grep ;-) An even shorter command is grep -h ':usbid' /usr/share/sane/descriptions{,-external}/*.desc | sort -u (not sure if the {foo,bar} expansion is bash-specific) You might also want to use '^:usbid' (anchor at line start) instead of ':usbid' to avoid strange problems in case a scanner has a funny name ;-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 160835] [AI] Mailing list for bugzilla tickets
by bugzilla_noreply＠novell.com 08 Sep '06

08 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=160835 ------- Comment #27 from cthiel(a)novell.com 2006-09-08 10:47 MST ------- .. correction: the announcement will be sent on Monady. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 160835] [AI] Mailing list for bugzilla tickets
by bugzilla_noreply＠novell.com 08 Sep '06

08 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=160835 suse-beta(a)cboltz.de changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |VERIFIED ------- Comment #26 from suse-beta(a)cboltz.de 2006-09-08 10:43 MST ------- Thanks for setting up the opensuse-bugs mailinglist - it works :-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 203688] warnings about udev in /var/log/messages
by bugzilla_noreply＠novell.com 08 Sep '06

08 Sep '06

https://bugzilla.novell.com/show_bug.cgi?id=203688 ------- Comment #7 from kasievers(a)novell.com 2006-09-08 10:09 MST ------- We probably can replace the PHYSDEV* key usage in: /etc/udev/rules.d/31-network.rules which starts/stops the ipw userspace binary, with: SUBSYSTEM=="drivers", ACTION=="add", KERNEL=="ipw3945", RUN+="ipw3945d.sh" SUBSYSTEM=="drivers", ACTION=="remove", KERNEL=="ipw3945", RUN+="ipw3945d.sh --kill" (I don't have the hardware to test.) Bluetooth is fixed. If the above works, the bug can be closed. Thanks! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0