- openSUSE Bugs

[Bug 194391] VIA K8M800 P-ATA driver via82cxxx not loaded during installation
by bugzilla_noreply＠novell.com 07 Nov '06

07 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=194391 htejun(a)gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 170097] Promise SATA 300-TX2 plus does not see any SATA disk
by bugzilla_noreply＠novell.com 07 Nov '06

07 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=170097 htejun(a)gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED ------- Comment #17 from htejun(a)gmail.com 2006-11-06 19:30 MST ------- Hello, Stephan Schwarz. Can you please post dmesg of a successful boot from ubuntu or knoppix? Sorry about all the trouble. :-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 216452] New: Update says package database in use (10.1beta1)
by bugzilla_noreply＠novell.com 07 Nov '06

07 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=216452 Summary: Update says package database in use (10.1beta1) Product: openSUSE 10.2 Version: Beta 1 Platform: i686 OS/Version: Linux Status: NEW Keywords: ZEN Severity: Normal Priority: P5 - None Component: Update Problems AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: sboyce(a)blueyonder.co.uk QAContact: jsrain(a)novell.com YasT-->Installation Source during Initializing gives an error "Another process is accessing the package database. Package management cannot be used now". I get the same error with the Zen Updater. I've killed zmd and "zen-updater --desktop /usr/lib/zen-updater/ZenUpdater.exe" processes, I still get the error in YaST. PID TTY STAT TIME COMMAND 1 ? Ss 0:00 init [5] 2 ? SN 0:04 [ksoftirqd/0] 3 ? S 0:00 [watchdog/0] 4 ? S< 0:00 [events/0] 5 ? S< 0:00 [khelper] 6 ? S< 0:00 [kthread] 76 ? S< 0:04 \_ [kblockd/0] 77 ? S< 1:25 \_ [kacpid] 78 ? S< 0:00 \_ [kacpi_notify] 209 ? S< 0:00 \_ [cqueue/0] 210 ? S< 0:00 \_ [ksuspend_usbd] 213 ? S< 0:00 \_ [khubd] 215 ? S< 0:00 \_ [kseriod] 236 ? S< 0:00 \_ [kapmd] 244 ? S< 0:06 \_ [kswapd0] 245 ? S< 0:00 \_ [aio/0] 1000 ? S< 0:00 \_ [scsi_eh_0] 1001 ? S< 0:11 \_ [usb-storage] 1022 ? S< 0:00 \_ [kpsmoused] 1041 ? S< 0:00 \_ [kedac] 2126 ? S< 0:00 \_ [reiserfs/0] 3655 ? S< 0:00 \_ [ac97/0] 5337 ? S< 0:00 \_ [kauditd] 30281 ? S 0:02 \_ [pdflush] 12885 ? S 0:00 \_ [pdflush] 2170 ? S<s 0:00 /sbin/udevd --daemon 4404 ? Ss 0:00 /sbin/acpid 4414 ? Ss 0:00 /sbin/syslog-ng 4423 ? Ss 0:46 /usr/bin/dbus-daemon --system 4426 ? Ss 0:00 /sbin/klogd -c 1 -x -x 4453 ? Ss 0:00 /sbin/resmgrd 4461 ? Ss 0:00 /usr/sbin/polkitd 4469 ? Ss 0:37 /usr/sbin/hald --daemon=yes 4470 ? S 0:00 \_ hald-runner 5218 ? S 0:00 \_ hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 5424 ? S 0:36 \_ hald-addon-storage: polling /dev/hdc 5427 ? S 0:06 \_ hald-addon-storage: polling /dev/sda 5431 ? S 0:02 \_ hald-addon-storage: polling /dev/sdb 5536 ? S 0:03 \_ hald-addon-storage: polling /dev/sdc 5538 ? S 0:03 \_ hald-addon-storage: polling /dev/sdd 5302 ? Ss 0:00 /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b 5331 ? Sl 1:23 /usr/bin/ntop -P /var/lib/ntop -i eth0 -u wwwrun -w 127.0.0.1:3000 5336 ? S<sl 0:00 /sbin/auditd -n 5358 ? Ss 0:04 /usr/sbin/hcid -f /etc/bluetooth/hcid.conf 5364 ? Ss 0:00 /usr/sbin/sdpd 5383 ? Ss 0:00 /usr/bin/hidd --server 5385 ? Ss 0:00 /sbin/portmap 5415 ? Ss 0:00 opd: waiting for incomming OBEX connections on channel 10... 5419 ? S< 0:00 [krfcommd] 5436 ? Ss 0:00 /usr/bin/pand --listen --role NAP 5557 ? S 0:00 /bin/sh /usr/bin/mysqld_safe --mysqld=mysqld --user=mysql --pid-file=/var/lib/mysql/mysqld.pid --socket=/var/lib/mysql/mysql.sock --datadir=/var/li b/mysql 5616 ? Sl 0:10 \_ /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/mysqld.pid --skip-locking --port=3306 --socket= /var/lib/mysql/mysql.sock 5664 ? Ss 0:00 /opt/kde3/bin/kdm 5710 tty7 SLs+ 18:56 \_ /usr/bin/X -br -nolisten tcp :0 vt7 -auth /var/lib/xdm/authdir/authfiles/A:0-5h7QOA 5727 ? S 0:00 \_ -:0 6261 ? Ss 0:00 \_ /bin/sh /usr/bin/kde 6339 ? Ss 0:00 \_ /usr/bin/ssh-agent /bin/bash /etc/X11/xinit/xinitrc 6392 ? S 0:00 \_ kwrapper ksmserver 5684 ? Ss 0:00 /usr/sbin/cupsd 5707 ? S 0:00 /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 5796 ? Ss 0:00 /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid 5804 ? Ss 0:00 /usr/sbin/xinetd 5805 ? Ss 0:00 /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp 5814 ? Ssl 0:04 /usr/sbin/nscd 5832 ? Ss 0:00 /usr/bin/postmaster -D /var/lib/pgsql/data 5898 ? S 0:00 \_ postgres: logger process 5929 ? S 0:00 \_ postgres: writer process 5930 ? S 0:00 \_ postgres: stats buffer process 5931 ? S 0:00 \_ postgres: stats collector process 5853 ? Ss 0:00 /usr/bin/perl /root/webmin-1.300/miniserv.pl /etc/webmin/miniserv.conf 5902 ? Ss 0:00 /usr/lib/postfix/master 5923 ? S 0:00 \_ qmgr -l -t fifo -u 15620 ? S 0:00 \_ pickup -l -t fifo -u 5920 ? Ss 0:00 /usr/sbin/cron 6008 ? Ss 0:00 /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf 6009 ? S 0:00 \_ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf 6010 ? S 0:00 \_ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf 6011 ? S 0:00 \_ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf 6012 ? S 0:00 \_ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf 6013 ? S 0:00 \_ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf 7611 ? S 0:00 \_ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf 7640 ? S 0:00 \_ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf 6018 tty1 Ss+ 0:00 /sbin/mingetty --noclear tty1 6019 tty2 Ss+ 0:00 /sbin/mingetty tty2 6020 tty3 Ss+ 0:00 /sbin/mingetty tty3 6021 tty4 Ss+ 0:00 /sbin/mingetty tty4 6022 tty5 Ss+ 0:00 /sbin/mingetty tty5 6023 tty6 Ss+ 0:00 /sbin/mingetty tty6 6343 ? Ss 0:00 /usr/bin/dbus-daemon --fork --print-pid 4 --print-address 6 --session 6379 ? S 0:00 start_kdeinit --new-startup +kcminit_startup 6380 ? Ss 0:00 kdeinit Running... 6385 ? S 0:00 \_ klauncher [kdeinit] --new-startup 6395 ? S 0:08 \_ kwin [kdeinit] -session 10c3c3d3e5000115971277100000044040000_1162042251_876471 6410 ? S 12:43 \_ konqueror [kdeinit] -session 10c3c3d3e5000115971278200000044040007_1162042201_567436 6415 ? S 0:16 \_ konsole [kdeinit] -session 10c3c3d3e5000115971503900000044040016_1162042202_82810 6432 pts/3 Ss 0:00 | \_ su - 17919 pts/3 S+ 0:00 | | \_ -bash 6434 pts/4 Ss 0:00 | \_ su - 31689 pts/4 S 0:00 | | \_ -bash 1968 pts/4 S 0:00 | | \_ unclutter 16488 pts/4 R+ 0:00 | | \_ ps fax 16489 pts/4 R+ 0:00 | | \_ less -XIM 6436 pts/5 Ss+ 0:00 | \_ su - 6438 pts/6 Ss+ 0:00 | \_ su - 6464 pts/14 Ss 0:00 | \_ su - 20827 pts/14 S 0:00 | | \_ -bash 20856 pts/14 S 0:00 | | \_ su lancelot 20857 pts/14 S+ 0:00 | | \_ bash 6471 pts/15 Ss+ 0:00 | \_ su - 6473 pts/16 Ss+ 0:00 | \_ su - 6475 pts/17 Ss+ 0:00 | \_ su - 6477 pts/18 Ss 0:00 | \_ su - 28289 pts/18 S 0:00 | | \_ -bash 28318 pts/18 S+ 0:00 | | \_ ssh -X bumble 6479 pts/19 Ss+ 0:00 | \_ su - 6417 ? S 0:00 \_ konsole [kdeinit] -session 10c3c3d3e5000115972632700000044040020_1162042202_89596 6424 pts/0 Ss 0:00 | \_ su - 7511 pts/0 S+ 0:00 | | \_ -bash 7545 pts/0 S 0:00 | | \_ /bin/sh /usr/local/bin/firefox 7556 pts/0 S 0:00 | | \_ /bin/sh /usr/local/firefox/run-mozilla.sh /usr/local/firefox/firefox-bin 7561 pts/0 Sl 69:20 | | \_ /usr/local/firefox/firefox-bin 7572 pts/0 Z 0:00 | | \_ [netstat] <defunct> 6427 pts/2 Ss+ 0:00 | \_ su - 6440 pts/7 Ss+ 0:00 | \_ su - 6442 pts/8 Ss+ 0:00 | \_ su - 6446 pts/9 Ss+ 0:00 | \_ su - 6448 pts/10 Ss+ 0:00 | \_ su - 6450 pts/11 Ss+ 0:00 | \_ su - 6452 pts/12 Ss+ 0:00 | \_ su - 6454 pts/13 Ss+ 0:00 | \_ su - 6492 pts/20 Ss+ 0:00 | \_ su - 6422 ? S 5:00 \_ konqueror [kdeinit] -session 10c3c3d3e5000116058185700000061600006_1162042201_579578 6423 ? S 0:00 \_ kcalc [kdeinit] -session 10c3c3d3e5000116119872900000062530033_1162042202_504900 6426 ? S 0:00 \_ /usr/bin/perl -w /usr/local/bin/ptktime -geometry 291x166+708+729 7043 ? S 0:00 \_ kdesu -u lancelot -c thunderbird 7044 ? S 0:00 | \_ /bin/sh /usr/local/bin/thunderbird 7055 ? S 0:00 | \_ /bin/sh /usr/local/thunderbird/run-mozilla.sh /usr/local/thunderbird/thunderbird-bin 7060 ? Sl 2:09 | \_ /usr/local/thunderbird/thunderbird-bin 17951 ? SLl 6:55 \_ gizmo 8784 ? S 0:00 \_ /opt/kde3/bin/artsd -F 10 -S 4096 -s 5 -m artsmessage -l 3 -f 15678 ? S 0:00 \_ kio_file [kdeinit] file /tmp/ksocket-lancelot/klauncherLasySa.slave-socket /tmp/ksocket-lancelot/kdedT8AQKb.slave-socket 15689 ? S 0:24 \_ kio_sysinfo [kdeinit] sysinfo /tmp/ksocket-lancelot/klauncherLasySa.slave-socket /tmp/ksocket-lancelot/konquerorWh85ic.slave-socket 16174 ? S 0:00 \_ kdesu -u root -c /sbin/yast2 16176 pts/21 Ss+ 0:00 \_ /usr/bin/sudo -u root /opt/kde3/bin/kdesu_stub - 16180 pts/23 Ss+ 0:00 \_ /opt/kde3/bin/kdesu_stub - 16183 ? Ss 0:00 \_ /bin/bash /sbin/yast2 16202 ? S 0:00 \_ /usr/lib/YaST2/bin/y2controlcenter 6383 ? S 0:06 dcopserver [kdeinit] --nosid 6387 ? S 0:10 kded [kdeinit] --new-startup 6394 ? S 0:00 ksmserver [kdeinit] 6397 ? S 0:06 kdesktop [kdeinit] 6399 ? S 0:53 kicker [kdeinit] 6409 ? S 0:00 kmix [kdeinit] -session 10c3c3d3e5000115971278200000044040006_1162042202_162076 6414 ? S 0:00 kerry [kdeinit] -session 10c3c3d3e5000115971278400000044040010_1162042202_302001 6421 ? S 8:51 maxemumtvguide -session 10c3c3d3e5000115982866400000044040054_1162042202_999477 6462 ? S 0:00 knotify [kdeinit] 6510 ? S 0:01 klipper [kdeinit] 6554 ? S 0:02 kbluetoothd --dontforceshow 6679 ? Sl 0:20 beagled --debug /usr/lib/beagle/BeagleDaemon.exe --bg 8717 ? Z 0:00 \_ [mono] <defunct> 8754 ? Z 0:00 \_ [mono] <defunct> 7063 ? S 0:09 /opt/gnome/lib/GConf/2/gconfd-2 17 7565 pts/0 S 0:00 /opt/gnome/lib/GConf/2/gconfd-2 12 28122 ? S 0:00 /opt/kde3/bin/kdesud 28152 ? S 0:00 /bin/bash /sbin/yast2 online_update 28173 ? Sl 0:10 \_ /usr/lib/YaST2/bin/y2base online_update qt 28384 ? S 0:00 kio_uiserver [kdeinit] 10230 ? S 0:00 /bin/sh /usr/local/firefox/firefox http://go.techtarget.com/r/681501/2080197 10234 ? S 0:00 \_ /bin/sh /usr/local/firefox/run-mozilla.sh /usr/local/firefox/firefox-bin http://go.techtarget.com/r/681501/2080197 10239 ? Sl 3:35 \_ /usr/local/firefox/firefox-bin http://go.techtarget.com/r/681501/2080197 10248 ? Z 0:00 \_ [netstat] <defunct> 14077 ? Ss 0:00 /usr/bin/esd -terminate -nobeeps -as 2 -spawnfd 16 16204 ? S 0:00 /bin/bash /sbin/yast2 inst_source 16225 ? Sl 0:00 \_ /usr/lib/YaST2/bin/y2base inst_source qt -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 18

[Bug 194391] VIA K8M800 P-ATA driver via82cxxx not loaded during installation
by bugzilla_noreply＠novell.com 07 Nov '06

07 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=194391 ------- Comment #10 from htejun(a)gmail.com 2006-11-06 19:00 MST ------- ahci in new libata stack supports vt8251-ahci. That should solve the problem cleanly. From the above messages, I get the impression that ide-generic is loaded automatically during installation. If that's true, I think it can be a bit dangerous as shown in this bug report. Many SATA controllers expose some form of IDE-compatible interface and weird things can happen. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 218189] New: Status in the gnome-main-menu don't handle LVM
by bugzilla_noreply＠novell.com 07 Nov '06

07 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=218189 Summary: Status in the gnome-main-menu don't handle LVM Product: openSUSE 10.2 Version: Beta 1 plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: claes.backstrom(a)gmail.com QAContact: qa(a)suse.de I have 2 LVM volumes and one standard partition (/boot). The status in gnome-main-menu only shows the used and free disk space from the standard partition. Nothing about LVM is shown. I don't have any EVMS volumes so I can't check if it works with EVMS. This problem exist in SLES 10 and SLED 10 as well. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 2

[Bug 216599] New: Broadcom network card on E1405 laptop does not work under Xen kernel 2.6.18.1-7-xen
by bugzilla_noreply＠novell.com 07 Nov '06

07 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=216599 Summary: Broadcom network card on E1405 laptop does not work under Xen kernel 2.6.18.1-7-xen Product: openSUSE 10.2 Version: Beta 1 Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Major Priority: P5 - None Component: Xen AssignedTo: cgriffin(a)novell.com ReportedBy: jbarton(a)technicalworks.net QAContact: qa(a)suse.de I have a Dell E1405 laptop with 10.2 beta 1 x86_64 installed. The network card is a Broadcom BCM4401-B0 100Base-TX. The card works fine under 10.1, here is my lspci output in 10.1: 02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) Subsystem: Dell Unknown device 01d8 Flags: bus master, fast devsel, latency 64, IRQ 177 Memory at df9fe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 When I boot the 10.2 beta 1 Xen kernel, the network card fails to start. Here is what is logged during system boot: usb 2-1: new full speed USB device using uhci_hcd and address 2 b44.c:v1.01 (Jun 16, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 b44 0000:02:00.0: No usable DMA configuration, aborting. ACPI: PCI interrupt for device 0000:02:00.0 disabled b44: probe of 0000:02:00.0 failed with error -5 ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:0c:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection PCI: Enabling device 0000:02:00.0 (0100 -> 0102) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 b44 0000:02:00.0: No usable DMA configuration, aborting. ACPI: PCI interrupt for device 0000:02:00.0 disabled b44: probe of 0000:02:00.0 failed with error -5 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 18 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[df9fd800-df9fdfff] Max Packet=[2048] IR/IT contexts=[4/4] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 sdhci: SDHCI controller found at 0000:02:01.1 [1180:0822] (rev 19) Here is the lspci output while in 10.2 beta 1, which seems to be different: 02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) Subsystem: Dell Unknown device 01d8 Flags: fast devsel, IRQ 17 Memory at df9fe000 (32-bit, non-prefetchable) [disabled] [size=8K] Capabilities: [40] Power Management version 2 Also, I tried to remove the b44 module that was loaded, and then re-ran modprobe b44, but this caused the laptop to lock-up immediately, and it had to be power-cycled. The laptop is a Dell e1405 with a core 2 duo processor. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 5

[Bug 188068] pin -v 100 foo tries to "su 100" ("su $2")
by bugzilla_noreply＠novell.com 07 Nov '06

07 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=188068 cthiel(a)novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED ------- Comment #14 from cthiel(a)novell.com 2006-11-06 17:32 MST ------- Fixed in STABLE. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 190084] apparmor.vim missing
by bugzilla_noreply＠novell.com 07 Nov '06

07 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=190084 cthiel(a)novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED ------- Comment #18 from cthiel(a)novell.com 2006-11-06 17:32 MST ------- fixed in STABLE. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 205697] New: Network port not detected on Asus A6T wth suse 10.2 Alpha 4 (64 bit).
by bugzilla_noreply＠novell.com 06 Nov '06

06 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=205697 Summary: Network port not detected on Asus A6T wth suse 10.2 Alpha 4 (64 bit). Product: openSUSE 10.2 Version: Alpha 4 Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: gdoig(a)pcug.org.au QAContact: qa(a)suse.de The network port is not detected on a Asus A6T series laptop it does NOT detect this port at all. I did a minimal kde install of suse 10.2 Alpha 4 (64 bit). The laptop details found here :- http://www.asus.com.au/products.aspx?l1=5&l2=24&l3=134&model=1185&modelmenu… # uname -a Linux orac 2.6.18-rc5-git6-2-default #1 SMP Fri Sep 1 22:19:04 UTC 2006 x86_64 x86_64 x86_64 GNU/Linux I use cables to connect to my ADSL modem. No wireless is used at all. Will you include a sutible driver in a future release of this distribution so the networking features can be detected and used. Also can you point me to a suitable driver for this very new model laptop where I can download, compile it, and install it manually. Also when I installed suse 10.2 Alpha 4 to this laptop I had to use the kernel switches acpi=off and nolapic to keep the suse linux o/s from randomly freezing and totally locking up the laptop. The numlock or caps lock lights would not respond at all, could not move mouse at all, my only choice was to cycle the power switch to turn off, Any clues to how I may fix this so the switches are not needed any more ?. I am happy to do more testing, and contribute. I need to know what bit to test next. Thankyou. Glenn ===== Parts of dmesg shows the following: Sep 14 21:31:21 orac kernel: NET: Registered protocol family 10 Sep 14 21:31:21 orac kernel: lo: Disabled Privacy Extensions Sep 14 21:31:21 orac kernel: IPv6 over IPv4 tunneling driver Sep 14 21:31:21 orac kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team Sep 14 21:31:21 orac kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Sep 14 21:31:21 orac kernel: Netfilter messages via NETLINK v0.30. Sep 14 21:31:21 orac kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 288 bytes per conntrack Sep 14 21:31:21 orac kernel: bcm43xx: PHY connected Sep 14 21:31:21 orac kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. Sep 14 21:31:23 orac ifup-dhcp: eth0 (DHCP) Sep 14 21:31:23 orac ifup-dhcp: . Sep 14 21:31:24 orac kernel: NET: Registered protocol family 17 Sep 14 21:31:24 orac firmware.sh[3063]: Cannot find firmware file 'bcm43xx_microcode5.fw' Sep 14 21:31:24 orac kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. Sep 14 21:31:24 orac dhcpcd[3053]: dhcpStart: ioctl SIOCSIFFLAGS: No such file or directory Sep 14 21:31:24 orac ifup-dhcp: . Sep 14 21:31:25 orac ifup-dhcp: . Sep 14 21:31:26 orac ifup-dhcp: . Sep 14 21:31:28 orac ifup-dhcp: . Sep 14 21:31:29 orac ifup-dhcp: no IP address yet... backgrounding. Sep 14 21:31:29 orac kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. Sep 14 21:31:29 orac ifup: Cannot enable interface eth0. Sep 14 21:31:29 orac firmware.sh[3083]: Cannot find firmware file 'bcm43xx_microcode5.fw' Sep 14 21:31:29 orac ifup-route: interface eth0 is not up Sep 14 21:31:29 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:29 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:29 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:29 orac ifstatus: eth0 is down Sep 14 21:31:30 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:30 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:30 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:30 orac ifstatus: eth0 is down Sep 14 21:31:31 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:31 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:31 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:31 orac ifstatus: eth0 is down Sep 14 21:31:32 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:32 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:32 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:32 orac ifstatus: eth0 is down Sep 14 21:31:33 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:33 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:33 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:33 orac ifstatus: eth0 is down Sep 14 21:31:35 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:35 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:35 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:35 orac ifstatus: eth0 is down Sep 14 21:31:36 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:36 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:36 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:36 orac ifstatus: eth0 is down Sep 14 21:31:37 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:37 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:37 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:37 orac ifstatus: eth0 is down Sep 14 21:31:38 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:38 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:38 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:38 orac ifstatus: eth0 is down Sep 14 21:31:38 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:38 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:38 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:38 orac ifstatus: eth0 is down Sep 14 21:31:39 orac auditd: Config file /etc/audit/auditd.conf doesn't exist, skipping Sep 14 21:31:39 orac kernel: audit(1158233499.107:3): audit_pid=3686 old=0 by auid=4294967295 Sep 14 21:31:39 orac auditd[3686]: Init complete, auditd 1.2.6 listening for events Sep 14 21:31:41 orac sshd[3818]: Server listening on :: port 22. Sep 14 21:31:42 orac kernel: powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (version 2.00.00) Sep 14 21:31:42 orac kernel: powernow-k8: MP systems not supported by PSB BIOS structure Sep 14 21:31:42 orac kernel: powernow-k8: MP systems not supported by PSB BIOS structure Sep 14 21:31:42 orac rcpowersaved: enter 'acpi' into CPUFREQD_MODULE in /etc/powersave/cpufreq. Sep 14 21:31:42 orac rcpowersaved: this will speed up starting powersaved and avoid unnecessary warnings in syslog. Sep 14 21:31:42 orac rcpowersaved: Cannot load cpufreq governors - No cpufreq driver available Sep 14 21:31:42 orac rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127) Sep 14 21:31:42 orac rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection. Sep 14 21:31:43 orac [powersave]: ERROR (MainLoop:66) Cannot access acpi/apm event file Sep 14 21:31:43 orac kdm: :0[3033]: pam_unix2(xdm:auth): user=0, password=1, at_same_time=1 Sep 14 21:31:44 orac PAM-devperm[3033]: opendir(/dev/snd/*): No such file or directory Sep 14 21:31:45 orac SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Sep 14 21:31:45 orac SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Sep 14 21:31:45 orac SuSEfirewall2: Warning: no interface active -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 21

[Bug 217660] New: gnome-python-desktop broken (/opt/gnome/lib/python2.5 not in Python search path)
by bugzilla_noreply＠novell.com 06 Nov '06

06 Nov '06

https://bugzilla.novell.com/show_bug.cgi?id=217660 Summary: gnome-python-desktop broken (/opt/gnome/lib/python2.5 not in Python search path) Product: openSUSE 10.2 Version: Beta 1 plus Platform: All OS/Version: All Status: NEW Severity: Major Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: andreas.hanke(a)gmx-topmail.de QAContact: qa(a)suse.de While trying to verify whether bug 216352 is indeed fixed, I found out that the gnome.applet module is now indeed built, but it cannot work because it is installed into the wrong prefix. All the following files cannot work correctly in their current location: /opt/gnome/lib/python2.5 /opt/gnome/lib/python2.5/site-packages /opt/gnome/lib/python2.5/site-packages/gtk-2.0 /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnome /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnome/applet.py /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnome/applet.pyc /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnome/applet.pyo /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomeapplet.la /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomeapplet.so /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomedesktop /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomedesktop/__init__.py /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomedesktop/__init__.pyc /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomedesktop/__init__.pyo /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomedesktop/_gnomedesktop.la /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomedesktop/_gnomedesktop.so /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomekeyring.la /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomekeyring.so /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomeprint /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomeprint/__init__.py /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomeprint/__init__.pyc /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomeprint/__init__.pyo /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomeprint/_print.la /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomeprint/ui.la /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gnomeprint/ui.so /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gtksourceview.la /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gtksourceview.so /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gtop.la /opt/gnome/lib/python2.5/site-packages/gtk-2.0/gtop.so /opt/gnome/lib/python2.5/site-packages/gtk-2.0/rsvg.la /opt/gnome/lib/python2.5/site-packages/gtk-2.0/rsvg.so /opt/gnome/lib/python2.5/site-packages/gtk-2.0/wnck.la /opt/gnome/lib/python2.5/site-packages/gtk-2.0/wnck.so /opt/gnome/share/pygtk /opt/gnome/share/pygtk/2.0 /opt/gnome/share/pygtk/2.0/defs /opt/gnome/share/pygtk/2.0/defs/_gnomedesktop.defs /opt/gnome/share/pygtk/2.0/defs/applet.defs /opt/gnome/share/pygtk/2.0/defs/art.defs /opt/gnome/share/pygtk/2.0/defs/gnomekeyring.defs /opt/gnome/share/pygtk/2.0/defs/gtksourceview.defs /opt/gnome/share/pygtk/2.0/defs/print.defs /opt/gnome/share/pygtk/2.0/defs/printui.defs /opt/gnome/share/pygtk/2.0/defs/wnck.defs I recommend changing the prefix of this package to /usr. Maybe you can move the gtk-doc files back to /opt/gnome, but the Python modules and PyGTK defs definitely belong to /usr. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3