[Bug 205697] New: Network port not detected on Asus A6T wth suse 10.2 Alpha 4 (64 bit).
https://bugzilla.novell.com/show_bug.cgi?id=205697 Summary: Network port not detected on Asus A6T wth suse 10.2 Alpha 4 (64 bit). Product: openSUSE 10.2 Version: Alpha 4 Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: gdoig@pcug.org.au QAContact: qa@suse.de The network port is not detected on a Asus A6T series laptop it does NOT detect this port at all. I did a minimal kde install of suse 10.2 Alpha 4 (64 bit). The laptop details found here :- http://www.asus.com.au/products.aspx?l1=5&l2=24&l3=134&model=1185&modelmenu=1 # uname -a Linux orac 2.6.18-rc5-git6-2-default #1 SMP Fri Sep 1 22:19:04 UTC 2006 x86_64 x86_64 x86_64 GNU/Linux I use cables to connect to my ADSL modem. No wireless is used at all. Will you include a sutible driver in a future release of this distribution so the networking features can be detected and used. Also can you point me to a suitable driver for this very new model laptop where I can download, compile it, and install it manually. Also when I installed suse 10.2 Alpha 4 to this laptop I had to use the kernel switches acpi=off and nolapic to keep the suse linux o/s from randomly freezing and totally locking up the laptop. The numlock or caps lock lights would not respond at all, could not move mouse at all, my only choice was to cycle the power switch to turn off, Any clues to how I may fix this so the switches are not needed any more ?. I am happy to do more testing, and contribute. I need to know what bit to test next. Thankyou. Glenn ===== Parts of dmesg shows the following: Sep 14 21:31:21 orac kernel: NET: Registered protocol family 10 Sep 14 21:31:21 orac kernel: lo: Disabled Privacy Extensions Sep 14 21:31:21 orac kernel: IPv6 over IPv4 tunneling driver Sep 14 21:31:21 orac kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team Sep 14 21:31:21 orac kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Sep 14 21:31:21 orac kernel: Netfilter messages via NETLINK v0.30. Sep 14 21:31:21 orac kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 288 bytes per conntrack Sep 14 21:31:21 orac kernel: bcm43xx: PHY connected Sep 14 21:31:21 orac kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. Sep 14 21:31:23 orac ifup-dhcp: eth0 (DHCP) Sep 14 21:31:23 orac ifup-dhcp: . Sep 14 21:31:24 orac kernel: NET: Registered protocol family 17 Sep 14 21:31:24 orac firmware.sh[3063]: Cannot find firmware file 'bcm43xx_microcode5.fw' Sep 14 21:31:24 orac kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. Sep 14 21:31:24 orac dhcpcd[3053]: dhcpStart: ioctl SIOCSIFFLAGS: No such file or directory Sep 14 21:31:24 orac ifup-dhcp: . Sep 14 21:31:25 orac ifup-dhcp: . Sep 14 21:31:26 orac ifup-dhcp: . Sep 14 21:31:28 orac ifup-dhcp: . Sep 14 21:31:29 orac ifup-dhcp: no IP address yet... backgrounding. Sep 14 21:31:29 orac kernel: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. Sep 14 21:31:29 orac ifup: Cannot enable interface eth0. Sep 14 21:31:29 orac firmware.sh[3083]: Cannot find firmware file 'bcm43xx_microcode5.fw' Sep 14 21:31:29 orac ifup-route: interface eth0 is not up Sep 14 21:31:29 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:29 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:29 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:29 orac ifstatus: eth0 is down Sep 14 21:31:30 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:30 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:30 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:30 orac ifstatus: eth0 is down Sep 14 21:31:31 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:31 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:31 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:31 orac ifstatus: eth0 is down Sep 14 21:31:32 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:32 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:32 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:32 orac ifstatus: eth0 is down Sep 14 21:31:33 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:33 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:33 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:33 orac ifstatus: eth0 is down Sep 14 21:31:35 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:35 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:35 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:35 orac ifstatus: eth0 is down Sep 14 21:31:36 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:36 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:36 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:36 orac ifstatus: eth0 is down Sep 14 21:31:37 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:37 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:37 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:37 orac ifstatus: eth0 is down Sep 14 21:31:38 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:38 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:38 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:38 orac ifstatus: eth0 is down Sep 14 21:31:38 orac ifstatus: eth0 device: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Sep 14 21:31:38 orac ifstatus: eth0 configuration: eth-id-00:18:f3:39:ee:93 Sep 14 21:31:38 orac ifstatus-dhcp: eth0 DHCP client NOT running Sep 14 21:31:38 orac ifstatus: eth0 is down Sep 14 21:31:39 orac auditd: Config file /etc/audit/auditd.conf doesn't exist, skipping Sep 14 21:31:39 orac kernel: audit(1158233499.107:3): audit_pid=3686 old=0 by auid=4294967295 Sep 14 21:31:39 orac auditd[3686]: Init complete, auditd 1.2.6 listening for events Sep 14 21:31:41 orac sshd[3818]: Server listening on :: port 22. Sep 14 21:31:42 orac kernel: powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (version 2.00.00) Sep 14 21:31:42 orac kernel: powernow-k8: MP systems not supported by PSB BIOS structure Sep 14 21:31:42 orac kernel: powernow-k8: MP systems not supported by PSB BIOS structure Sep 14 21:31:42 orac rcpowersaved: enter 'acpi' into CPUFREQD_MODULE in /etc/powersave/cpufreq. Sep 14 21:31:42 orac rcpowersaved: this will speed up starting powersaved and avoid unnecessary warnings in syslog. Sep 14 21:31:42 orac rcpowersaved: Cannot load cpufreq governors - No cpufreq driver available Sep 14 21:31:42 orac rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127) Sep 14 21:31:42 orac rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection. Sep 14 21:31:43 orac [powersave]: ERROR (MainLoop:66) Cannot access acpi/apm event file Sep 14 21:31:43 orac kdm: :0[3033]: pam_unix2(xdm:auth): user=0, password=1, at_same_time=1 Sep 14 21:31:44 orac PAM-devperm[3033]: opendir(/dev/snd/*): No such file or directory Sep 14 21:31:45 orac SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Sep 14 21:31:45 orac SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Sep 14 21:31:45 orac SuSEfirewall2: Warning: no interface active -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #1 from gdoig@pcug.org.au 2006-09-14 07:06 MST ------- Created an attachment (id=98684) --> (https://bugzilla.novell.com/attachment.cgi?id=98684&action=view) hwinfo output -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #2 from gdoig@pcug.org.au 2006-09-14 07:07 MST ------- Created an attachment (id=98685) --> (https://bugzilla.novell.com/attachment.cgi?id=98685&action=view) dmesg output -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #3 from gdoig@pcug.org.au 2006-09-14 07:09 MST ------- Created an attachment (id=98686) --> (https://bugzilla.novell.com/attachment.cgi?id=98686&action=view) last part of /var/log/messages -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #4 from gdoig@pcug.org.au 2006-09-15 07:37 MST ------- lspci output 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 02:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce Go 7600] (rev a1) 03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) 03:01.2 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08) 03:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #5 from gdoig@pcug.org.au 2006-09-15 23:54 MST ------- Issue is fixed (here is how this was done). Info from here http://gentoo-wiki.com/HARDWARE_RTL8168 driver version 1.04 Sections used (TROUBLESHOOTING) search the following (line 51-53): edit the file r1000_n.c MODULE_PARM (speed, "1-" __MODULE_STRING(MAX_UNITS) "i"); MODULE_PARM (duplex, "1-" __MODULE_STRING(MAX_UNITS) "i"); MODULE_PARM (autoneg, "1-" __MODULE_STRING(MAX_UNITS) "i"); and change it to: MODULE_PARM_DESC (speed, "1-" __MODULE_STRING(MAX_UNITS) "i"); MODULE_PARM_DESC (duplex, "1-" __MODULE_STRING(MAX_UNITS) "i"); MODULE_PARM_DESC (autoneg, "1-" __MODULE_STRING(MAX_UNITS) "i"); # make clean modules # make install # depmod -a part of dmesg log eth1: no IPv6 routers present ====================== eth0: Identified chip type is 'RTL8168B/8111B'. eth0: r10001.04, the Linux device driver for Realtek Ethernet Controllers at 0xc800, 00:18:f3:3b:93:52, IRQ 11 Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter Driver version:1.04 Released date:2006/07/07 Link Status:Linked Link Speed:100Mbps Duplex mode:Full-Duplex I/O Base:0xC800(I/O port) IRQ:11 . . . . eth0 renamed to eth1 bcm43xx: module not supported by Novell, setting U taint flag. bcm43xx driver -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #6 from gdoig@pcug.org.au 2006-09-16 00:01 MST ------- Created an attachment (id=98869) --> (https://bugzilla.novell.com/attachment.cgi?id=98869&action=view) Network card configuration overview showing AsusTek eth controller -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #7 from gdoig@pcug.org.au 2006-09-16 00:04 MST ------- If you wish to - please review if this driver can included with a future distribution and close this. Thankyou. :-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #8 from gdoig@pcug.org.au 2006-09-17 01:03 MST ------- Created an attachment (id=98893) --> (https://bugzilla.novell.com/attachment.cgi?id=98893&action=view) Hardware listing after driver added in -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 aj@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team- |kernel-maintainers@forge.provo.novell.com |screening@forge.provo.novell| |.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |gdoig@pcug.org.au ------- Comment #9 from gregkh@novell.com 2006-10-05 13:06 MST ------- Can you please try the 10.2 alpha 5 release? It should fix the acpi=off issue and lockups. Also, we are not accepting new drivers into our kernel tree, like the one mentioned above. You are free to create a kernel module package for it though. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 gdoig@pcug.org.au changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|gdoig@pcug.org.au | ------- Comment #10 from gdoig@pcug.org.au 2006-10-10 21:22 MST ------- I could not get 10.2 alpha 5 (64 bit) installed at all because of a md5sum error - which I logged in https://bugzilla.novell.com/show_bug.cgi?id=211277 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |gdoig@pcug.org.au ------- Comment #11 from gregkh@novell.com 2006-10-11 12:54 MST ------- We can't do anything about Alpha4. Please try the next release that you can. Will set to NEEDINFO until that happens. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 gdoig@pcug.org.au changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|gdoig@pcug.org.au | ------- Comment #12 from gdoig@pcug.org.au 2006-10-27 03:36 MST ------- I tried to do a new installation with suse 10.2 BETA1 (64bit) and it failed with the error 'Failed to initialize the Catalogue. Try Again ? error' Patameters used in the install was nolapic acpi=off Y2DEBUG=1 I did a check on cd-1 ,it passed its checksum was OK. At the Installation Mode - Selected 'New Installation' screen, It failed when I selected next option. ERROR: 'Failed to initialize the Catalog. Try Again ?' I Tried several times but it failed with the same error each time. I then got the logs by using Shift-F8 y2logs.tgz saved to /tmp/ I then switched to a console Ctrl-Alt-F2 How do I mount a usb key so I can copy the y2logs.tgz onto it, then attach it to this incident. The mount command showed no output at all. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #13 from gdoig@pcug.org.au 2006-10-27 04:56 MST ------- Created an attachment (id=102803) --> (https://bugzilla.novell.com/attachment.cgi?id=102803&action=view) contents of /var/log/YaST2 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 ------- Comment #14 from gdoig@pcug.org.au 2006-10-27 05:00 MST ------- I managed to copy the y2logs.tgz a partition on the local disk. and I noticed in evms-engine.log Oct 27 06:18:55 linux _3_ Engine: load_plugins: Module /lib64/evms/2.5.5/reiser-1.1.15.so skipped by load_plugin_function Oct 27 06:18:55 linux _5_ Engine: load_module_plugins: Loaded from /lib64/evms/2.5.5/replace-1.1.3.so. Oct 27 06:18:55 linux _5_ Engine: load_module_plugins: short name: Replace Oct 27 06:18:55 linux _5_ Engine: load_module_plugins: long name: EVMS Replace Oct 27 06:18:55 linux _5_ Engine: load_module_plugins: version: 1.1.3 Oct 27 06:18:55 linux _5_ Engine: load_module_plugins: Loaded from /lib64/evms/2.5.5/snapshot-3.1.11.so. Oct 27 06:18:55 linux _5_ Engine: load_module_plugins: short name: Snapshot Oct 27 06:18:55 linux _5_ Engine: load_module_plugins: long name: Snapshot Feature Oct 27 06:18:55 linux _5_ Engine: load_module_plugins: version: 3.1.11 Oct 27 06:18:55 linux _3_ Engine: load_plugins: Module /lib64/evms/2.5.5/swap-1.1.13.so skipped by load_plugin_function Oct 27 06:18:55 linux _3_ Engine: load_plugins: Module /lib64/evms/2.5.5/xfs-1.0.12.so skipped by load_plugin_function Oct 27 06:18:55 linux _5_ Bad plug-in pointer: try_run: mkdosfs completed with exit code 1. Oct 27 06:18:56 linux _5_ Bad plug-in pointer: try_run: dosfsck completed with exit code 2. Oct 27 06:18:56 linux _3_ Engine: do_fork_and_execvp: execvp() failed. errno is 2: No such file or directory Oct 27 06:18:56 linux _5_ Bad plug-in pointer: try_run: fatresize completed with exit code 2. Oct 27 06:18:56 linux _5_ Bad plug-in pointer: try_run: mkdosfs completed with exit code 1. Oct 27 06:18:56 linux _5_ Bad plug-in pointer: try_run: dosfsck completed with exit code 2. Oct 27 06:18:56 linux _3_ Engine: do_fork_and_execvp: execvp() failed. errno is 2: No such file or directory Oct 27 06:18:56 linux _5_ Bad plug-in pointer: try_run: fatresize completed with exit code 2. Oct 27 06:18:56 linux _3_ Engine: do_fork_and_execvp: execvp() failed. errno is 2: No such file or directory Oct 27 06:18:56 linux _2_ OGFS: ogfs_exec_utility: mkfs.ogfs completed with exit code 2 Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/hda failed with error code 30: Read-only file system Oct 27 06:18:56 linux _3_ LocalDskMgr: check_multipath: Cannot get list of DM devices. Oct 27 06:18:56 linux _3_ LocalDskMgr: check_multipath: Cannot get list of DM devices. Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram0 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram1 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram10 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram11 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram12 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram13 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram14 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram15 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram2 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram3 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram4 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram5 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram6 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram7 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram8 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _3_ Engine: engine_open_object: Open of /dev/evms/.nodes/ram9 failed with error code 22: Invalid argument Oct 27 06:18:56 linux _5_ Engine: initial_discovery: Discovery time: 00:00:00.111286 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |gdoig@pcug.org.au ------- Comment #15 from gregkh@novell.com 2006-11-01 23:25 MST ------- I'm confused. What is the final problem here? The fact that we do not have a specific network driver? Or that there is a bug in the version of the network driver that we ship? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 gdoig@pcug.org.au changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|gdoig@pcug.org.au | ------- Comment #16 from gdoig@pcug.org.au 2006-11-02 06:33 MST ------- Hello, Sorry for the confusion. It's the case of the fact that there is no specific network driver. Questions: What is the best way to get the driver in ?, so it can be an installable item.(rpm ?). The compilation detailes can be sourced from http://gentoo-wiki.com/HARDWARE_RTL8168 (also from comment #5) Should autobuild be used for the compilation of this module ? I will need guidance on howto submit these kind of changes. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 vkhaitan@gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |vkhaitan@gmail.com ------- Comment #17 from vkhaitan@gmail.com 2006-11-03 08:09 MST ------- Why is it not possible to include r1000 driver? Kubuntu has it inbuilt. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |WONTFIX ------- Comment #18 from gregkh@novell.com 2006-11-03 09:55 MST ------- We do not include drivers that are not upstream. You are free to do this as an add-on kernel module package. Please push the developers of this driver to get their code upstream. I am closing this out, as there is nothing we can do here, sorry. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 vkhaitan@gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|WONTFIX | ------- Comment #19 from vkhaitan@gmail.com 2006-11-06 11:07 MST ------- Why do you include ndiswrapper then ? Remove every driver which is not in the kernel then! I am not asking to include the driver in the kernel source tree itself. Instead, I am asking for at least the driver to be in dvd/cd image, which can be installed, when detected. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205697 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution| |WONTFIX ------- Comment #20 from gregkh@novell.com 2006-11-06 15:02 MST ------- If you wish to create such a kernel package, you are welcome to do so. But at the moment, we are not adding new kernel driver packages to the distro, especially with the beta releases already happening. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
participants (1)
-
bugzilla_noreply＠novell.com