September 2021 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1190469] New: Boot hangs on Raspberry Pi 3
by bugzilla_noreply＠suse.com 20 Sep '21

20 Sep '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1190469 Bug ID: 1190469 Summary: Boot hangs on Raspberry Pi 3 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: aarch64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs(a)suse.de Reporter: guillaume.gardet(a)arm.com QA Contact: qa-bugs(a)suse.de CC: afaerber(a)suse.com, dmueller(a)suse.com, mbrugger(a)suse.com Found By: --- Blocker: --- Created attachment 852489 --> http://bugzilla.opensuse.org/attachment.cgi?id=852489&action=edit Serial log on RPi3 On openQA, snapshot 20210912 hangs on Raspberry Pi 3, whereas it boots properly on Raspberry Pi 4. Logs in attachment. From the logs, the following lines may be relevant: [ 23.749199] dracut-pre-mount[769]: warning: /dev/mmcblk0: partition 3 is not defined yet [ 24.031592] dracut-pre-mount[769]: Re-reading the partition table failed.: Device or resource busy It also hangs on Raspberry Pi 2 (armv7), but I do not have the logs yet. -- You are receiving this mail because: You are on the CC list for the bug.

1 10

[Bug 1190224] podman unable to find the right cgroup setting
by bugzilla_noreply＠suse.com 20 Sep '21

20 Sep '21

https://bugzilla.suse.com/show_bug.cgi?id=1190224 https://bugzilla.suse.com/show_bug.cgi?id=1190224#c5 --- Comment #5 from Yiannis Bonatakis <ioannis.bonatakis(a)suse.com> --- i couldnt reproduce it the only change is the assignment of the uid range in the /etc/subuid and some minor additions in registries.conf ``` �� emacs -nw Dockerfile �� podman build . STEP 1: FROM python:3 �� docker.io/library/python:3 Trying to pull docker.io/library/python:3... Getting image source signatures Copying blob 8584d51a9262 done Copying blob 2756ef5f69a5 done Copying blob 524774b7d363 done Copying blob 955615a668ce done Copying blob 911ea9f2bd51 done Copying blob 27b0a22ee906 done Copying blob 46cd7abc9e93 done Copying blob af193b9b3d11 done Copying blob aacb0e56e8f3 done Copying config a5210955ee done Writing manifest to image destination Storing signatures STEP 2: WORKDIR /srv/www/ --> 563d8427094 STEP 3: COPY . . --> 8c9ea44cd0e STEP 4: RUN mkdir templates/ && cp index.html templates --> b2257ff96e4 STEP 5: RUN pip install --no-cache-dir -r requirements.txt Collecting Flask==1.0 Downloading Flask-1.0-py2.py3-none-any.whl (97 kB) Collecting click>=5.1 Downloading click-8.0.1-py3-none-any.whl (97 kB) Collecting itsdangerous>=0.24 Downloading itsdangerous-2.0.1-py3-none-any.whl (18 kB) Collecting Werkzeug>=0.14 Downloading Werkzeug-2.0.1-py3-none-any.whl (288 kB) Collecting Jinja2>=2.10 Downloading Jinja2-3.0.1-py3-none-any.whl (133 kB) Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.0.1-cp39-cp39-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (30 kB) Installing collected packages: MarkupSafe, Werkzeug, Jinja2, itsdangerous, click, Flask Successfully installed Flask-1.0 Jinja2-3.0.1 MarkupSafe-2.0.1 Werkzeug-2.0.1 click-8.0.1 itsdangerous-2.0.1 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv --> e3e47332bdf STEP 6: EXPOSE 80 --> 6e561ce8101 STEP 7: ENV WORLD_VAR Arda --> 828362dd6b0 STEP 8: ENTRYPOINT ["python", "./app.py"] STEP 9: COMMIT --> 8b27384b3b4 8b27384b3b4423a76d6e00ea4170b722f9f6304a107a9852d11cc4e5bdc47439 �� cat Dockerfile FROM python:3 # set a directory for the app WORKDIR /srv/www/ # copy all the files to the container COPY . . RUN mkdir templates/ && cp index.html templates # install dependencies RUN pip install --no-cache-dir -r requirements.txt # tell the port number the container should expose EXPOSE 80 ENV WORLD_VAR Arda # run the command ENTRYPOINT ["python", "./app.py"] �� cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20210915" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" VERSION_ID="20210915" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20210915" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" DOCUMENTATION_URL="https://en.opensuse.org/Portal:Tumbleweed" LOGO="distributor-logo-Tumbleweed" �� podman info host: arch: amd64 buildahVersion: 1.21.3 cgroupControllers: [] cgroupManager: systemd cgroupVersion: v2 conmon: package: conmon-2.0.29-1.1.x86_64 path: /usr/bin/conmon version: 'conmon version 2.0.29, commit: unknown' cpus: 8 distribution: distribution: '"opensuse-tumbleweed"' version: "20210915" eventLogger: journald hostname: aquarius idMappings: gidmap: - container_id: 0 host_id: 100 size: 1 - container_id: 1 host_id: 200000 size: 1001 uidmap: - container_id: 0 host_id: 1000 size: 1 - container_id: 1 host_id: 200000 size: 1001 kernel: 5.13.13-1-default linkmode: dynamic memFree: 3822075904 memTotal: 33317834752 ociRuntime: name: runc package: runc-1.0.2-1.1.x86_64 path: /usr/bin/runc version: |- runc version 1.0.2 spec: 1.0.2-dev go: go1.13.15 libseccomp: 2.5.2 os: linux remoteSocket: path: /run/user/1000/podman/podman.sock security: apparmorEnabled: false capabilities: CAP_AUDIT_WRITE,CAP_CHOWN,CAP_DAC_OVERRIDE,CAP_FOWNER,CAP_FSETID,CAP_KILL,CAP_MKNOD,CAP_NET_BIND_SERVICE,CAP_NET_RAW,CAP_SETFCAP,CAP_SETGID,CAP_SETPCAP,CAP_SETUID,CAP_SYS_CHROOT rootless: true seccompEnabled: true seccompProfilePath: /etc/containers/seccomp.json selinuxEnabled: false serviceIsRemote: false slirp4netns: executable: /usr/bin/slirp4netns package: slirp4netns-1.1.11-30.14.x86_64 version: |- slirp4netns version 1.1.11 commit: unknown libslirp: 4.6.1 SLIRP_CONFIG_VERSION_MAX: 3 libseccomp: 2.5.2 swapFree: 850845696 swapTotal: 2147479552 uptime: 453h 48m 17.44s (Approximately 18.88 days) registries: registry.opensuse.org: Blocked: false Insecure: true Location: registry.opensuse.org MirrorByDigestOnly: false Mirrors: [] Prefix: registry.opensuse.org registry.suse.de: Blocked: false Insecure: true Location: registry.suse.de MirrorByDigestOnly: false Mirrors: [] Prefix: registry.suse.de search: - registry.opensuse.org - docker.io store: configFile: /home/iob/.config/containers/storage.conf containerStore: number: 0 paused: 0 running: 0 stopped: 0 graphDriverName: overlay graphOptions: {} graphRoot: /home/iob/.local/share/containers/storage graphStatus: Backing Filesystem: xfs Native Overlay Diff: "false" Supports d_type: "true" Using metacopy: "false" imageStore: number: 8 runRoot: /run/user/1000/containers volumePath: /home/iob/.local/share/containers/storage/volumes version: APIVersion: 3.2.3 Built: 1626480000 BuiltTime: Sat Jul 17 02:00:00 2021 GitCommit: "" GoVersion: go1.13.15 OsArch: linux/amd64 Version: 3.2.3 �� cat /etc/containers/registries.conf # For more information on this configuration file, see containers-registries.conf(5). # # Registries to search for images that are not fully-qualified. # i.e. foobar.com/my_image:latest vs my_image:latest [registries.search] registries = ["registry.opensuse.org", "docker.io"] # Registries that do not use TLS when pulling images or uses self-signed # certificates. [registries.insecure] registries = ['registry.opensuse.org', 'registry.suse.de'] # Blocked Registries, blocks the `docker daemon` from pulling from the blocked registry. If you specify # "*", then the docker daemon will only be allowed to pull from registries listed above in the search # registries. Blocked Registries is deprecated because other container runtimes and tools will not use it. # It is recommended that you use the trust policy file /etc/containers/policy.json to control which # registries you want to allow users to pull and push from. policy.json gives greater flexibility, and # supports all container runtimes and tools including the docker daemon, cri-o, buildah ... [registries.block] registries = [] �� cat /etc/subuid ftpuser:100000:65536 dockremap:100000000:100000001 iob:200000:1001 ``` -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1190224] podman unable to find the right cgroup setting
by bugzilla_noreply＠suse.com 20 Sep '21

20 Sep '21

https://bugzilla.suse.com/show_bug.cgi?id=1190224 Yiannis Bonatakis <ioannis.bonatakis(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |ioannis.bonatakis(a)suse.com -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1190567] New: vmlinuz is no longer present on /boot/ breaking separate boot partitions
by bugzilla_noreply＠suse.com 20 Sep '21

20 Sep '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1190567 Bug ID: 1190567 Summary: vmlinuz is no longer present on /boot/ breaking separate boot partitions Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: dcermak(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The kernel packaging in Tumbleweed changed "recently" (at some point in the last months): vmlinuz is no longer on /boot/ but is now in /usr/lib/modules. I guess that this has been introduced as part of the usrmerge effort. However, this breaks images build by kiwi that use a separate boot partition, as now all these symlinks are dead when booting from that separate partition. This leads to booting issues like: Loading Linux 5.14.1-1-default ... error: ../../grub-core/fs/fshelp.c:257:file `/vmlinuz-5.14.1-1-default' not found. Loading initial ramdisk ... error: ../../grub-core/loader/i386/linux.c:1053:you need to load the kernel first. Example disk image: - https://build.opensuse.org/package/show/Virtualization:Appliances:Images:Te… - https://build.opensuse.org/package/show/Virtualization:Appliances:Images:Te… -- You are receiving this mail because: You are on the CC list for the bug.

1 11

[Bug 1189868] [Build 20210825] 389ds: dsctl status fails
by bugzilla_noreply＠suse.com 20 Sep '21

20 Sep '21

https://bugzilla.suse.com/show_bug.cgi?id=1189868 https://bugzilla.suse.com/show_bug.cgi?id=1189868#c3 --- Comment #3 from William Brown <william.brown(a)suse.com> --- Reminder for needinfo -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1190648] New: Yast crashes on package installation/update
by bugzilla_noreply＠suse.com 19 Sep '21

19 Sep '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1190648 Bug ID: 1190648 Summary: Yast crashes on package installation/update Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.3 Hardware: Other OS: openSUSE Leap 15.3 Status: NEW Severity: Critical Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: ivano.mercuri(a)yahoo.it QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Firefox/78.0 Build Identifier: After I select all packages I need, the next window, that one with the two progress bars, after like 1-2 seconds closes itself with no feedback. This happens on GUI, terminal or vtty. This is an example https://streamable.com/nlje77 Reproducible: Always Steps to Reproduce: 1. Open Yast2 2. Select Software Management 3. Search packages needed, like c++ 4. Click on Accept Actual Results: The next window, the one with the progress bars, closes right after 1-2 seconds Expected Results: Installation or updating of selected packages Yast debug https://streamable.com/nlje77 Current Repos # | Alias | Name | Enabled | GPG Check | Refresh | URI --+--------------------+----------------+---------+-----------+---------+----------------------------------------------------------------------------- 1 | backports | backports | Yes | (r ) Yes | Yes | http://download.opensuse.org/update/leap/15.3/backports/ 2 | non-oss | Non-OSS | Yes | (r ) Yes | Yes | http://download.opensuse.org/distribution/leap/15.3/repo/non-oss/ 3 | non-oss_1 | Update Non-OSS | Yes | (r ) Yes | Yes | http://download.opensuse.org/update/leap/15.3/non-oss/ 4 | openSUSE_Leap_15.3 | snappy | No | ---- | ---- | https://download.opensuse.org/repositories/system:/snappy/openSUSE_Leap_15.3 5 | oss | OSS | Yes | (r ) Yes | Yes | http://download.opensuse.org/distribution/leap/15.3/repo/oss/ 6 | oss_1 | Update | Yes | (r ) Yes | Yes | http://download.opensuse.org/update/leap/15.3/oss/ 7 | sle | sle | Yes | (r ) Yes | Yes | http://download.opensuse.org/update/leap/15.3/sle/ Yast log ( last rows ) 2021-09-15 01:38:02 <1> OpenSuse(6031) [librpmDb] librpmDb.cc(blockAccess):316 Block access 2021-09-15 01:38:02 <1> OpenSuse(6031) [librpmDb] RpmDb.cc(closeDatabase):373 closeDatabase: RpmDb['()'] 2021-09-15 01:38:02 <1> OpenSuse(6031) [zypp] TargetImpl.cc(~TargetImpl):927 Targets closed 2021-09-15 01:38:02 <1> OpenSuse(6031) [librpmDb] RpmDb.cc(~RpmDb):240 ~RpmDb() 2021-09-15 01:38:02 <1> OpenSuse(6031) [librpmDb] RpmDb.cc(~RpmDb):243 ~RpmDb() end 2021-09-15 01:38:02 <1> OpenSuse(6031) [Pkg] PkgFunctions.cc(~PkgFunctions):161 Zypp pointer released 2021-09-15 01:38:02 <1> OpenSuse(6031) [zypp++] MediaSetAccess.cc(release):487 Releasing all media IDs held by this MediaSetAccess 2021-09-15 01:38:02 <1> OpenSuse(6031) [zypp++] MediaSetAccess.cc(release):487 Releasing all media IDs held by this MediaSetAccess 2021-09-15 01:38:02 <1> OpenSuse(6031) [zypp++] MediaSetAccess.cc(release):487 Releasing all media IDs held by this MediaSetAccess 2021-09-15 01:38:02 <1> OpenSuse(6031) [zypp++] MediaSetAccess.cc(release):487 Releasing all media IDs held by this MediaSetAccess 2021-09-15 01:38:02 <1> OpenSuse(6031) [zypp++] MediaSetAccess.cc(release):487 Releasing all media IDs held by this MediaSetAccess 2021-09-15 01:38:02 <2> OpenSuse(6031) [qt-ui] YQUI.cc(qMessageHandler):652 <libqt-warning> QObject::~QObject: Timers cannot be stopped from another thread 2021-09-15 01:38:02 <1> OpenSuse(6031) [Y2Ruby] binary/YRuby.cc(~YRuby):117 Shutting down ruby interpreter. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1182345] go1.16 release tracking
by bugzilla_noreply＠suse.com 19 Sep '21

19 Sep '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1182345 Jeff Kowalczyk <jkowalczyk(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |IN_PROGRESS -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1190476] VUL-0: chromium: update to 93.0.4577.82
by bugzilla_noreply＠suse.com 19 Sep '21

19 Sep '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1190476 http://bugzilla.opensuse.org/show_bug.cgi?id=1190476#c2 --- Comment #2 from OBSbugzilla Bot <bwiedemann+obsbugzillabot(a)suse.com> --- This is an autogenerated message for OBS integration: This bug (1190476) was mentioned in https://build.opensuse.org/request/show/920184 15.2 / chromium -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1176929] QEMU/KVM is broken on N1SDP (Armv8.2) - failure in uefi
by bugzilla_noreply＠suse.com 19 Sep '21

19 Sep '21

https://bugzilla.suse.com/show_bug.cgi?id=1176929 https://bugzilla.suse.com/show_bug.cgi?id=1176929#c7 Liang Yan <lyan(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|IN_PROGRESS |RESOLVED Resolution|--- |FIXED Flags|needinfo?(afaerber(a)suse.com | |) | --- Comment #7 from Liang Yan <lyan(a)suse.com> --- QEMU usually takes an older version as default for compatible purposes, so 2 it is here. I would agree "gic-version=host" would be a better solution, will mark it in our documents. (https://www.mail-archive.com/qemu-devel@nongnu.org/msg674469.html) Close the bug here, thanks for reporting and finding the solution here. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1177827] New: GIMP 2.10 comes with documentation of 2.8
by bugzilla_noreply＠suse.com 19 Sep '21

19 Sep '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1177827 Bug ID: 1177827 Summary: GIMP 2.10 comes with documentation of 2.8 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: x86-64 OS: openSUSE Leap 15.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: screening-team-bugs(a)suse.de Reporter: martin.jacobs(a)arcor.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Installed packages are: libgimp-2_0-0-2.10.12-lp152.1.12.x86_64 gimp-lang-2.10.12-lp152.1.12.noarch gimp-plugin-aa-2.10.12-lp152.1.12.x86_64 gimp-2.10.12-lp152.1.12.x86_64 gimp-plugins-python-2.10.12-lp152.1.12.x86_64 libgimpui-2_0-0-2.10.12-lp152.1.12.x86_64 gimp-help-2.8.2-lp152.4.1.noarch gimp-help-de-2.8.2-lp152.4.1.noarch All packages except gimp-help show version 2.10, but gimp-help and gimp-help-de is still on 2.8 Gimp 2.10 documentation is available! E.g.: https://docs.gimp.org/2.10/en/ Source repository is openSUSE-Leap-15.2-Oss Please upgrade to 2.10 documentation. -- You are receiving this mail because: You are on the CC list for the bug.

1 1