January 2019 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 936416] New: harfbuzz 32bit devel package missing symlinks
by bugzilla_noreply＠novell.com 10 Feb '22

10 Feb '22

http://bugzilla.opensuse.org/show_bug.cgi?id=936416 Bug ID: 936416 Summary: harfbuzz 32bit devel package missing symlinks Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: admin(a)leinir.dk QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The 32bit devel package of harfbuzz (and accompanying harfbuzz-icu) is missing the .so symlinks in /usr/lib. Temporary workaround: ln -s libharfbuzz.so.0 /usr/lib/libharfbuzz.so ln -s libharfbuzz-icu.so.0 /usr/lib/libharfbuzz-icu.so -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 954329] New: Purely virtual bridge breaks networking
by bugzilla_noreply＠novell.com 08 Feb '22

08 Feb '22

http://bugzilla.suse.com/show_bug.cgi?id=954329 Bug ID: 954329 Summary: Purely virtual bridge breaks networking Classification: openSUSE Product: openSUSE Tumbleweed Version: 2015* Hardware: Other OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: lmb(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Take a purely virtual bridge (to be used for VMs) with a static network configuration: # cat /etc/sysconfig/network/ifcfg-br0 STARTMODE='auto' BOOTPROTO='static' BRIDGE='yes' BRIDGE_PORTS='' BRIDGE_FORWARDDELAY='0' BRIDGE_STP='off' IPADDR='172.16.1.1/24' enp0s25 is the local, normal ethernet interface which is working fine: 2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 Now: # ifup br0 # ip link 2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP mode DEFAULT group default qlen 1000 link/ether 28:d2:44:df:33:18 brd ff:ff:ff:ff:ff:ff 9: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 28:d2:44:df:33:18 brd ff:ff:ff:ff:ff:ff It seems that the scripts use the ethernet interface as the *default* value for BRIDGE_PORTS, which obviously then breaks networking. (If I had wanted a slaved network device, I'd have configured one.) brctl addbr br0 ; ip a add dev br0 172.16.1.1/24 ; ip link set br0 up creates the desired configuration just fine and is what I'd have expected given the configuration file. -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 1057592] New: Cannot connect to EAP secured wireless network with wicked
by bugzilla_noreply＠novell.com 08 Feb '22

08 Feb '22

http://bugzilla.suse.com/show_bug.cgi?id=1057592 Bug ID: 1057592 Summary: Cannot connect to EAP secured wireless network with wicked Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: lmb(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I have trouble connecting my laptop to a PEAP secured wireless network, embarrassingly the AttachemateGroup one at SUSE HQ. The network settings seem to be right and match: BOOTPROTO='dhcp' BROADCAST='' DHCLIENT_SET_DEFAULT_ROUTE='yes' ETHTOOL_OPTIONS='' IPADDR='' MTU='' NAME='Wireless 7260' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='manual' WIRELESS_AP='' WIRELESS_AP_SCANMODE='1' WIRELESS_AUTH_MODE='eap' WIRELESS_BITRATE='auto' WIRELESS_CA_CERT='' WIRELESS_CHANNEL='' WIRELESS_CLIENT_CERT='' WIRELESS_CLIENT_KEY='' WIRELESS_CLIENT_KEY_PASSWORD='' WIRELESS_DEFAULT_KEY='0' WIRELESS_EAP_AUTH='MSCHAPV2' WIRELESS_EAP_MODE='PEAP' WIRELESS_ESSID='AttachmateGroup' WIRELESS_FREQUENCY='' WIRELESS_KEY='' WIRELESS_KEY_0='' WIRELESS_KEY_1='' WIRELESS_KEY_2='' WIRELESS_KEY_3='' WIRELESS_KEY_LENGTH='128' WIRELESS_MODE='Managed' WIRELESS_NICK='' WIRELESS_NWID='' WIRELESS_PEAP_VERSION='' WIRELESS_POWER='no' WIRELESS_WPA_ANONID='' WIRELESS_WPA_IDENTITY='lmb' WIRELESS_WPA_PASSWORD='xxxxxxxx' WIRELESS_WPA_PSK='' Sep 07 13:44:40 hermes kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled Sep 07 13:44:43 hermes kernel: wlp3s0: authenticate with f0:5c:19:1f:93:f0 Sep 07 13:44:43 hermes kernel: wlp3s0: send auth to f0:5c:19:1f:93:f0 (try 1/3) Sep 07 13:44:43 hermes kernel: wlp3s0: authenticated Sep 07 13:44:43 hermes kernel: wlp3s0: associate with f0:5c:19:1f:93:f0 (try 1/3) Sep 07 13:44:43 hermes kernel: wlp3s0: RX AssocResp from f0:5c:19:1f:93:f0 (capab=0x1411 status=0 aid=9) Sep 07 13:44:43 hermes kernel: wlp3s0: associated Sep 07 13:44:43 hermes wickedd-dhcp4[1521]: wlp3s0: Request to acquire DHCPv4 lease with UUID 4957ae59-c728-0b00-f205-000033000000 Sep 07 13:44:43 hermes kernel: wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by f0:5c:19:1f:93:f0 Sep 07 13:44:46 hermes kernel: wlp3s0: deauthenticating from f0:5c:19:1f:93:f0 by local choice (Reason: 3=DEAUTH_LEAVING) Sep 07 13:44:53 hermes wickedd-dhcp4[1521]: unable to confirm lease Sep 07 13:44:58 hermes wickedd-dhcp4[1521]: wlp3s0: defer timeout 15 reached (state INIT) Sep 07 13:45:00 hermes kernel: wlp3s0: authenticate with f0:5c:19:1f:97:f0 Sep 07 13:45:00 hermes kernel: wlp3s0: send auth to f0:5c:19:1f:97:f0 (try 1/3) Sep 07 13:45:00 hermes kernel: wlp3s0: authenticated Sep 07 13:45:00 hermes kernel: wlp3s0: associate with f0:5c:19:1f:97:f0 (try 1/3) Sep 07 13:45:00 hermes kernel: wlp3s0: RX AssocResp from f0:5c:19:1f:97:f0 (capab=0x1411 status=0 aid=13) Sep 07 13:45:00 hermes kernel: wlp3s0: associated Sep 07 13:45:00 hermes wickedd-dhcp4[1521]: wlp3s0: Request to acquire DHCPv4 lease with UUID 4957ae59-c728-0b00-f205-000033000000 Sep 07 13:45:00 hermes kernel: wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f0:5c:19:1f:97:f0 Sep 07 13:45:03 hermes kernel: wlp3s0: deauthenticating from f0:5c:19:1f:97:f0 by local choice (Reason: 3=DEAUTH_LEAVING) Sep 07 13:45:10 hermes wickedd-dhcp4[1521]: unable to confirm lease Sep 07 13:45:15 hermes wickedd-dhcp4[1521]: wlp3s0: defer timeout 15 reached (state INIT) Sep 07 13:45:41 hermes kernel: wlp3s0: authenticate with f0:5c:19:1f:93:e0 Sep 07 13:45:41 hermes kernel: wlp3s0: send auth to f0:5c:19:1f:93:e0 (try 1/3) Sep 07 13:45:41 hermes kernel: wlp3s0: f0:5c:19:1f:93:e0 denied authentication (status 17) Sep 07 13:45:43 hermes wickedd-nanny[1523]: device wlp3s0: got signal linkDown Sep 07 13:45:43 hermes kernel: wlp3s0: authenticate with f0:5c:19:1f:93:e0 Sep 07 13:45:43 hermes kernel: wlp3s0: send auth to f0:5c:19:1f:93:e0 (try 1/3) Sep 07 13:45:43 hermes kernel: wlp3s0: aborting authentication with f0:5c:19:1f:93:e0 by local choice (Reason: 3=DEAUTH_LEAVING) So there are a bunch of successful authentication attempts, but then DHCP doesn't work. Eventually the server throws me out again though. And no, the password is not incorrect. ;-) -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 1091864] New: [RPM] The %make_install macro from marcos.cmake gets overwritten by macro.qt5
by bugzilla_noreply＠novell.com 08 Feb '22

08 Feb '22

http://bugzilla.suse.com/show_bug.cgi?id=1091864 Bug ID: 1091864 Summary: [RPM] The %make_install macro from marcos.cmake gets overwritten by macro.qt5 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: asn(a)cryptomilk.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The cmake macros allow you to use ninja [1]. However it doesn't work if macros.qt5 is installed because it overwrite the macro. Instead of ninja, make is called. [1] https://en.opensuse.org/openSUSE:Build_system_recipes#cmake -- You are receiving this mail because: You are on the CC list for the bug.

2 24

[Bug 1089938] New: yast-samba-client fails to join if /etc/samba/smb.conf or /etc/krb5.conf don't exist
by bugzilla_noreply＠novell.com 03 Feb '22

03 Feb '22

http://bugzilla.suse.com/show_bug.cgi?id=1089938 Bug ID: 1089938 Summary: yast-samba-client fails to join if /etc/samba/smb.conf or /etc/krb5.conf don't exist Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Samba Assignee: samba-maintainers(a)SuSE.de Reporter: david.mulder(a)suse.com QA Contact: samba-maintainers(a)SuSE.de Found By: --- Blocker: --- # sudo rm /etc/samba/smb.conf /etc/krb5.conf Join fails with "Cannot use the Workgroup xxxx for linux authentication" # sudo touch /etc/samba/smb.conf Join begins, but fails with "Failed to join domain: failed to connect to AD: Included profile file could not be read" # sudo touch /etc/krb5.conf Join succeeds and stubs out the smb.conf and krb5.conf files. -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 996088] New: After updates today (29/08/16) efibootmgr: Could not set BootOrder: No space left on device
by bugzilla_noreply＠novell.com 28 Jan '22

28 Jan '22

http://bugzilla.opensuse.org/show_bug.cgi?id=996088 Bug ID: 996088 Summary: After updates today (29/08/16) efibootmgr: Could not set BootOrder: No space left on device Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader Assignee: jsrain(a)suse.com Reporter: stuart(a)stella-maris.org.uk QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- After performing an update today, 29/08/16, I decided to run efibootmgr -v as I have had issues before. I then found it returned BootCurrent: 0003 Timeout: 1 seconds No BootOrder is set; firmware will attempt recovery Boot0000* opensuse HD(1,GPT,2eca2750-fed6-4e3f-887f-27f183020fda,0x800,0x61800)/File(\EFI\opensuse\grubx64.efi) Boot0001* Hard Drive BBS(HD,,0x0) Boot0002* CD/DVD Drive BBS(CDROM,,0x0) After which I ran efibootmgr -o 0000,0001,0002 which returned efibootmgr: Could not set BootOrder: No space left on device I then tried both update-bootloader --reinit which failed, then grub2-install which failed as well. This ended up with no efi boot options at all. I had to resort to chrooting from TW rescue disk and re-install grub2 and recover my PC. So far I have not tried to run the update-bootloader --reinit or grub2-install again since recovering my system as I fear it will mess up the system once more. As part of the update various grub2 packages were updated all not at beta3-10 level, the zypper history shows dracut running but no apparent errors were reported there. -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 1111728] New: Out of date package: openSUSE:Factory/efibootmgr
by bugzilla_noreply＠novell.com 28 Jan '22

28 Jan '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1111728 Bug ID: 1111728 Summary: Out of date package: openSUSE:Factory/efibootmgr Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: sean(a)suspend.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- https://build.opensuse.org/package/show/openSUSE:Factory/efibootmgr is out of date (14). Current upstream is https://github.com/rhinstaller/efibootmgr/releases/download/17/efibootmgr-1…. -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1093071] New: YaST constantly steals focus
by bugzilla_noreply＠novell.com 24 Jan '22

24 Jan '22

http://bugzilla.suse.com/show_bug.cgi?id=1093071 Bug ID: 1093071 Summary: YaST constantly steals focus Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: openSUSE Factory Status: NEW Severity: Major Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: okurz(a)suse.com QA Contact: jsrain(a)suse.com CC: ben.kevan(a)bio-rad.com, casualprogrammer(a)opensuse.org, cyberorg(a)opensuse.org, diego.ercolani(a)gmail.com, ensonic(a)sonicpulse.de, federico(a)suse.com, francis(a)opensuse.org, gabriel(a)opensuse.org, jdsn(a)suse.com, jonas(a)jonasbjork.net, l_v_brienen(a)casema.nl, m.moeller(a)opensuse.org, Markus.Elfring(a)web.de, martin(a)oneiros.de, mmeeks(a)suse.com, ptomes(a)gmail.com, ric8cruz(a)gmail.com, Roland.Kletzing(a)dguv.de, sbrabec(a)suse.com, tilman(a)imap.cc, Ulrich.Windl(a)rz.uni-regensburg.de, volker_apelt(a)yahoo.de Found By: --- Blocker: --- +++ This bug was initially created as a clone of Bug #326158 +++ ## Observation There are a lot of very old bugs already and at least in the current state seems like the behaviour described in these bugs is still present: YaST during some actions, especially package installation (but not in the "software management" module itself), opens many popup dialogs and steals the focus preventing to work with the system while yast does its actions ## Steps to reproduce * In an installed system, open the yast control center, open "Remote Administration (VNC)", enable any of the Remote Administration options and confirm * Confirm installation of necessary package and minimize or focus another application * Observe how the yast configuration dialog gains focus again (unminimized) ## Expected result * For minimised YaST progress dialogs should never popup * progress dialogs should not get focus for unfocussed foreground applications ## Further details Seems this has been reported already many times so it might be interesting to dig a bit into history here: * https://bugzilla.suse.com/show_bug.cgi?id=326158 * https://bugzilla.suse.com/show_bug.cgi?id=331835 * https://bugzilla.suse.com/show_bug.cgi?id=34759 * https://bugzilla.suse.com/show_bug.cgi?id=334631 * https://bugzilla.suse.com/show_bug.cgi?id=615927 * https://bugzilla.suse.com/show_bug.cgi?id=372319 * https://bugzilla.suse.com/show_bug.cgi?id=74073 * https://bugzilla.suse.com/show_bug.cgi?id=330649 * https://bugzilla.suse.com/show_bug.cgi?id=297642 * https://bugzilla.suse.com/show_bug.cgi?id=298071 -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 1084804] New: Plasma + Wayland: input method does not start
by bugzilla_noreply＠novell.com 19 Jan '22

19 Jan '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1084804 Bug ID: 1084804 Summary: Plasma + Wayland: input method does not start Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Major Priority: P5 - None Component: KDE Workspace (Plasma) Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: ftake(a)geeko.jp QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- On Plasma + Wayland session, input method like IBus, Fcitx does not start anymore. This is simply because /etc/X11/xim, which has been a script to launch one of input methods, is not executed on a Wayland session. So we need to update our input method launcher script to support Wayland. How can we do that? What is the right way to set environment variables such as GTK_IM_MODULE and QT_IM_MODULE according to the current selected input method under on Wayland session? Workaround: Set GTK_IM_MODULE and QT_IM_MODULE in ~/.i18n and start ibus-daemon -xd or fcitx by using KDE auto start settings. However, both IBus and Fcitx will not work correctly due to other bugs and limitations related to Wayland. -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 1047498] New: gnuhealth not installable
by bugzilla_noreply＠novell.com 17 Jan '22

17 Jan '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1047498 Bug ID: 1047498 Summary: gnuhealth not installable Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.3 Hardware: Other OS: Other Status: NEW Severity: Critical Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: fvogt(a)suse.com QA Contact: qa-bugs(a)suse.de CC: axel.braun(a)gmx.de, okurz(a)suse.com Found By: --- Blocker: --- Found by openQA (https://openqa.opensuse.org/tests/441262#step/gnuhealth_install/12) and confirmed by installcheck: can't install gnuhealth-3.2.0-1.1.noarch: nothing provides python3-caldav needed by gnuhealth-3.2.0-1.1.noarch nothing provides python3-cracklib needed by gnuhealth-3.2.0-1.1.noarch nothing provides python3-pyBarcode needed by gnuhealth-3.2.0-1.1.noarch -- You are receiving this mail because: You are on the CC list for the bug.

2 9