January 2019 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 966042] New: yast command-line usage emits "unable to close filehandle properly" warning at exit
by bugzilla_noreply＠novell.com 09 Sep '22

09 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=966042 Bug ID: 966042 Summary: yast command-line usage emits "unable to close filehandle properly" warning at exit Classification: openSUSE Product: openSUSE Tumbleweed Version: 2015* Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: bk(a)ancilla.ca QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Specifically, it says: Warning: unable to close filehandle properly: Bad file descriptor, <STDIN> line 21 during global destruction (#1) (S io) An error occurred when Perl implicitly closed a filehandle. This usually indicates your file system ran out of disk space. This happens with (as far as I can tell, I haven't tested exhaustively) all command-line yast invokations that involve a module. So, e.g., "yast users help" or "yast sysconfig help" will produce this message. "yast help" on its own, however, won't. It does not appear to affect yast's exit code, or it's ability to do its job; if I run "yast sysconfig set LOADER_TYPE=none", it does the right thing and then produces that message while exiting. Despite the hint that it may be space-related, this happens on multiple computers, all of them with plenty of space available on all filesystems. These systems are all running recent (~2 weeks) versions of Tumbleweed. -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 997317] New: grub2-branding lacks posttrans
by bugzilla_noreply＠novell.com 07 Sep '22

07 Sep '22

http://bugzilla.suse.com/show_bug.cgi?id=997317 Bug ID: 997317 Summary: grub2-branding lacks posttrans Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.2 Hardware: x86-64 OS: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader Assignee: jsrain(a)suse.com Reporter: ohering(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- grub2-branding creates a grub2.cfg in its %post. this is a very expensive operation, in combination with os-prober. there is nothing in that pkg which requires immediate action. cumulate the required steps and do it once in a single %posttrans. -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1047852] New: knotify_libjack audio kcrash on pthread_key_create() at ../common/JackError.cpp:88
by bugzilla_noreply＠novell.com 07 Sep '22

07 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1047852 Bug ID: 1047852 Summary: knotify_libjack audio kcrash on pthread_key_create() at ../common/JackError.cpp:88 Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE3 Assignee: anixx(a)opensuse.org Reporter: drankinatty(a)suddenlinkmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 731684 --> http://bugzilla.opensuse.org/attachment.cgi?id=731684&action=edit knotify_libjack wdebug kcrash file (the 6 is just the 6th one I saved) A knotify/libjack.so.0 crash will regularly occur once during a session. It may take a day or two for the bug to appear, but on access to sound theme sound (no one in particular, e.g. dialog-open, minimize, etc.) a kcrash report appears and the desktop sounds no longer play until you restart the desktop. This time it took 2 days 5:29 minutes under heavy use to occur. It is strangely random when it happens, but very consistent that it *will* happen. This is not new and has been around at least since 13.1 (it may go back to 11.4). I have experiences this on two separate laptops with 13.1 and Leap 42.2. (I really think it was there in 11.4, but I'm far too old to remember) I have attached a wdebug.kcrash that details the error. -- You are receiving this mail because: You are on the CC list for the bug.

2 33

[Bug 952799] New: bogofilter-{db,sqlite3} insists on using wordlist.tc
by bugzilla_noreply＠novell.com 06 Sep '22

06 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=952799 Bug ID: 952799 Summary: bogofilter-{db,sqlite3} insists on using wordlist.tc Classification: openSUSE Product: openSUSE Tumbleweed Version: 2015* Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: gour(a)atmarama.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- In the past, when using other Linux distros I was mostly using bogofilter with sqlite3 back-end, but after switching to openSUSE I've decided to convert to 'default' (Berkeley) DB backend. Unfortunately, after bogofilter package was updated in openSUSE, it looks it does insist on using $HOME/.bogofilter/wordlist.tc for the database name even if one uses Berkeley DB or Sqlite3 back-ends? When I try to use my old wordlist.db, Bogofilter plugin (Claws & Evolution) starts from the scratch and creates wordlist.tc. I wonder about this line in *.spec: %if 0%{?suse_version} > 1320 iow. whether the new Bogofilter package is ready to use existing setup with appropriate back-end (not equal to TokyoCabinet)? -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 1107615] New: sysconfig requires ifup
by bugzilla_noreply＠novell.com 06 Sep '22

06 Sep '22

http://bugzilla.suse.com/show_bug.cgi?id=1107615 Bug ID: 1107615 Summary: sysconfig requires ifup Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: mt(a)suse.com Reporter: lnussel(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- sysconfig requires ifup and that pulls in wicked. For a basic container chroot that is not needed actually. Can we drop requiring ifup? Alternatively or in addition is it safe to not install sysconfig at all? netconfig which is needed for /etc/resolv.conf is separate anyways so sysconfig basically just provides some skeletons for ppp/ip-up and config files. -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 1104264] New: Recommended packages that are missing:
by bugzilla_noreply＠novell.com 01 Sep '22

01 Sep '22

http://bugzilla.suse.com/show_bug.cgi?id=1104264 Bug ID: 1104264 Summary: Recommended packages that are missing: Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: luizluca(a)tre-sc.jus.br QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hello, Multiple files recommends packages that does not exist: kfilemetadata5-5.48.0-1.1.x86_64 recommends catdoc elfutils-0.173-1.1.x86_64 recommends elfutils.lang libgcr-3-1-3.28.0-1.2.x86_64 recommends gcr-ask-pass patterns-base-enhanced_base-20170410-4.1.x86_64 recommends genisoimage libgtk-3-0-3.22.30-4.1.x86_64 recommends gtk3-immodule-tigrigna kactivitymanagerd-5.13.4-1.1.x86_64 recommends kactivitymanagerd-imports patterns-base-enhanced_base_opt-20170410-4.1.x86_64 recommends ksymoops patterns-base-enhanced_base-20170410-4.1.x86_64 recommends recode patterns-base-minimal_base-20170410-4.1.x86_64 recommends system-group-trusted terminfo-base-6.1-6.5.x86_64 recommends terminfo-screeen patterns-yast-yast2_basis-20180613-1.1.x86_64 recommends yast2-ldap-client -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 907495] New: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed)
by bugzilla_noreply＠novell.com 26 Aug '22

26 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=907495 Bug ID: 907495 Summary: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed) Classification: openSUSE Product: openSUSE 12.3 Version: Final Hardware: Other OS: openSUSE 13.2 Status: NEW Severity: Major Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: hpj(a)urpla.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When adding a manual route to a dhcp configured eth interface managed by wicked, the dhcp setup fails with a silly message: device enp7s0 failed: "call to org.opensuse.Network.Addrconf.ipv4.static.requestLease failed: General failure" Add a manual route to a dhcp configured interface and restart your system. Be prepared, that this interface will not come up correctly. BTW: the routing editor allows selecting configured interfaces only. The usual order is: setup interface, add route, but you have to confirm the interface setup first, reenter yast network and add the interface based route there after. -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 992494] New: áÁéÉíÍóÓúÚüÜ cannot be typed in any app using Asturian language and spanish Asturian variant keyboard
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=992494 Bug ID: 992494 Summary: áÁéÉíÍóÓúÚüÜ cannot be typed in any app using Asturian language and spanish Asturian variant keyboard Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: All OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: enolp(a)softastur.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The key combination for typing áÁéÉíÍóÓúÚüÜ does not working, (they appear as aAeEiIoOuUuU), by setting "España - asturianu (ast_ES)" locale and "Asturian (Spain, with bottom-dot H and bottom-dot L)" keyboard layout in any application. However, Ḥḥ, Ḷḷ and Ññ Asturian letters are typed correctly in KDE and GTK applications except Firefox, where all works perfectly. yast2-country package was recently patched because of a similar bug, but updating it, doesn't fix the problem. https://bugzilla.suse.com/show_bug.cgi?id=981008 -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 938955] New: Desktop selection overridden when installing without recommended packages.
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=938955 Bug ID: 938955 Summary: Desktop selection overridden when installing without recommended packages. Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: cwh(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Chosing not to install recommnded packages leads to a minimal installation even without xorg and desktop environment although a desktop environment has been selected before. Either the patterns have to be fixed or the no-recommends option should only be allowed for the minimal pattern. -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1074138] New: Yast2 package manager UI very slow
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=1074138 Bug ID: 1074138 Summary: Yast2 package manager UI very slow Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: amajer(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- I have a basic install. I would like to look through installed package list and uninstall extra things I don't really need anymore. So, 1. yast2 -> Package Manager 2. list all packages 3. click on a package like Mesa-libGLESv2-devel and click uninstall 4. wait 30+ seconds while Package Manager window is completely unresponsive and 100% CPU usage. workaround, 1. filter to only list few packages. 2. click uninstall Please fix. There is no reason Qt based UI should be slow, especially for simple tables like this. This problems seems to exist in all versions of Yast. -- You are receiving this mail because: You are on the CC list for the bug.

2 14