September 2016 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 986096] After the Samba upgrade from version 4.4.2 to version 4.4.4 in TW 20160613, I cannot connect to my shared folders anymore
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.suse.com/show_bug.cgi?id=986096 http://bugzilla.suse.com/show_bug.cgi?id=986096#c25 --- Comment #25 from Giuseppe Gorgoglione <gorgoglione(a)gmail.com> --- > That worked this time, and I was able to read them. I'm assuming the > working capture is one with the /etc/hosts entry (rather than the older > samba). Yes, that's the one with the host entry > If you have any setups left with the older, working samba install, > it would be great to see what happens there. Unfortunately not, because the TW 20160613 release marked for me the switch between working and non working, but the problem was much older. There was a long period of time (let's say one year) in which the samba connections started to become increasingly difficult. They were immediate at the beginning (as they are now with the hosts setting) and then started to have lags of tenths of seconds. After that, release after release, the lag approached the timeout limit so I started to have timeouts but after few retries I still got to have a connection. Finally with TW 20160613 it stopped working completely and I decided to investigate with wireshark and found the hosts workaround. I can try to go back to Leap 42.1 and openSUSE 13.2 and provide you a report about those. And maybe also switching back TW from wicked to NetworkManager. > Now, I'm wondering...are you running nmbd too? Yes, I do. > What I notice is that the > dns query goes out for nausica and nausica.localdomain, but that fails. > Based on the dns server address, I'm guessing the host which is performing > the NAT is also doing the DNS. But in both cases I don't see successful > netbios name lookups. I think you got the point. Investigating a little bit, I found this [1], page 195, chapter "Understanding DHCP in a NAT Configuration" and chapter "Understanding the NAT Device". Specifically: "The NAT device is a DNS proxy and forwards DNS requests from the virtual machines to a DNS server that the host system knows. Responses return to the NAT device, which then forwards them to the virtual machines." Of course I never had a DNS server on my Windows host, so it always relied on netbios for local name resolution... [1] http://pubs.vmware.com/workstation-12/topic/com.vmware.ICbase/PDF/workstati… -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 966042] yast command-line usage emits "unable to close filehandle properly" perl warning from ag_tty at exit
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.suse.com/show_bug.cgi?id=966042 http://bugzilla.suse.com/show_bug.cgi?id=966042#c3 Martin Vidner <mvidner(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|yast command-line usage |yast command-line usage |emits "unable to close |emits "unable to close |filehandle properly" perl |filehandle properly" perl |warning at exit |warning from ag_tty at exit --- Comment #3 from Martin Vidner <mvidner(a)suse.com> --- I have run strace -f /usr/lib/YaST2/bin/y2base 'sysconfig' '-S' '(help)' UI and found that the error message is produced by ag_tty. The problem can also be reproduced with /usr/lib/YaST2/servers_non_y2/ag_tty < /dev/null -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 996633] Drop wrong Requires in gnome-control-center
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.suse.com/show_bug.cgi?id=996633 http://bugzilla.suse.com/show_bug.cgi?id=996633#c6 Felix Zhang <fezhang(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|CONFIRMED |IN_PROGRESS Assignee|bnc-team-gnome(a)forge.provo. |fezhang(a)suse.com |novell.com | --- Comment #6 from Felix Zhang <fezhang(a)suse.com> --- The fix has been submitted to SLE. Thanks! https://build.suse.de/request/show/120457 -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 996802] New: Leap 42.2 Beta 1: Installation: Sound Configuration: detected sound cards are not automatically configured
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.opensuse.org/show_bug.cgi?id=996802 Bug ID: 996802 Summary: Leap 42.2 Beta 1: Installation: Sound Configuration: detected sound cards are not automatically configured Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.2 Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Major Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: bugrprt21882(a)online.de QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- After the installation of Leap 42.2 Beta 1 completed, the audio level of the system sounds was very low -- almost inaudible. Investigation revealed that, the YaST Hardware Sound Configuration was reporting that, a sound card was detected but not configured. Configuring the detected card with the default automatic configuration YaST routine resolved the issue. -------------------------------------------------------------- Given the amount of Forums discussion related to this issue and, the number of "new to openSUSE" folks, might it not be a reasonable idea to execute the default automatic sound card configuration routine on each detected sound card during installation? -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 989871] System goes into emergency mode on boot (lvmetad problem)
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.suse.com/show_bug.cgi?id=989871 http://bugzilla.suse.com/show_bug.cgi?id=989871#c12 --- Comment #12 from Michael Chang <mchang(a)suse.com> --- I don't think its grub2, but the different version of dracut and udev between Leap 42.2 and TW. The boot process has past grub2 and handed over to kernel, in a sequence that initrd is in charge of mounting root filesystem (which failed ..). -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 996633] New: Drop wrong Requires in gnome-control-center
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.opensuse.org/show_bug.cgi?id=996633 Bug ID: 996633 Summary: Drop wrong Requires in gnome-control-center Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: zaitor(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Drop Mesa-demo-x Requires: No longer needed. It's not been needed since Jan 2013.... -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 962980] Cannot enable "exec" service in xinetd (rsh-server not installed; available online but not on DVD)
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.suse.com/show_bug.cgi?id=962980 http://bugzilla.suse.com/show_bug.cgi?id=962980#c8 Martin Vidner <mvidner(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |CONFIRMED CC| |mvidner(a)suse.com Summary|Cannot enable "exec" |Cannot enable "exec" |service in xinetd |service in xinetd |(rsh-server not installed) |(rsh-server not installed; | |available online but not on | |DVD) --- Comment #8 from Martin Vidner <mvidner(a)suse.com> --- > I suggest to get rid of this hardcoded list in YaST and work with actually installed services only. The way it is now is just prone to become wrong. I think it is actually more useful like this, with installing the missing packages. In this case, rsh-server is available only in the online repo but not on the DVD. If this is a common problem we could tell the user to add the online repo, or even help them with that. (yast2-inetd and xinetd are also available on SUSE Linux Enterprise) -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 989279] OCICLI warns (perl) unable to close filehandle properly: Bad file descriptor
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.suse.com/show_bug.cgi?id=989279 http://bugzilla.suse.com/show_bug.cgi?id=989279#c2 Martin Vidner <mvidner(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |mvidner(a)suse.com Summary|OCICLI warns `Bad file |OCICLI warns (perl) unable |descriptor` |to close filehandle | |properly: Bad file | |descriptor Flags|needinfo?(jeroen.forums.ope | |nsuse.org(a)pluimers.com) | --- Comment #2 from Martin Vidner <mvidner(a)suse.com> --- I dont think the logs would help here. Possibly a duplicate of https://bugzilla.suse.com/show_bug.cgi?id=966042 -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 996032] openSUSE Tumbleweed 20160826: Chromium crashes systematically when loading certain web pages
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.suse.com/show_bug.cgi?id=996032 Swamp Workflow Management <swamp(a)suse.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Whiteboard| |obs:running:5568:important -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 995932] Chromium 52 crashes when trying to open page
by bugzilla_noreply＠novell.com 01 Sep '16

01 Sep '16

http://bugzilla.suse.com/show_bug.cgi?id=995932 Swamp Workflow Management <swamp(a)suse.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Whiteboard| |obs:running:5568:important -- You are receiving this mail because: You are on the CC list for the bug.

1 0