August 2015 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 812607] New: Unmounting of network file system takes long time on restart
by bugzilla_noreply＠novell.com 09 Aug '16

09 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=812607 https://bugzilla.novell.com/show_bug.cgi?id=812607#c0 Summary: Unmounting of network file system takes long time on restart Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: tosiara(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:19.0) Gecko/20100101 Firefox/19.0 If SAMBA share is mounted at /mnt/samba and you do restart - it will take long time and you will see last message - "Unmounting /mnt/samba". Looks like network brought down before unmounting network file share Reproducible: Always Steps to Reproduce: 1. Config network to use ifup, connect over wireless and mount SAMBA share 2. Restart the system 3. Usually it takes few seconds to reboot, but this time the screen hangs at "Unmounting /mnt/samba" for about a minute Actual Results: Restart takes long time because it is waiting for unmount Expected Results: It should umnount samba share before bringing network down and do restart quickly -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 714995] New: open-iscsi script does not properly umount iscsi devices
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=714995 https://bugzilla.novell.com/show_bug.cgi?id=714995#c0 Summary: open-iscsi script does not properly umount iscsi devices Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: thomas.saupe(a)novell.com QAContact: qa(a)suse.de Found By: Novell Technical Services Services Priority: 1000 Blocker: --- The code for umounting iscsi device in /etc/init.d/open-iscsi is broken, especially if the iscsi devices are used within multipathing. On system shutdown the umount of the mounted iscsi devices fails but the devices itself get logged out. This leads to a hang of the reboot, since the later the boot.localfs init script tries to umount the iscsi mounts that already have lost their devices. Attached a patch to the open-iscsi init script that corrects this. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 21

[Bug 851573] New: Second SATA drive extremely slow
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=851573 https://bugzilla.novell.com/show_bug.cgi?id=851573#c0 Summary: Second SATA drive extremely slow Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: hecht(a)biopsy.uni-jena.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:25.0) Gecko/20100101 Firefox/25.0 Intel DH77KC, i7, Plextor SSD, Seagate ST2000DM001 HDD Update openSuse 13.1 from 12.3 SSD fast as expected (ca. 450 MB/s), HDD extremely slow, test with hdparm -t shows Timing buffered disk reads: 2 MB in 5.70 seconds = 359.20 kB/sec changing of port to non 6GB/s -> same problem adding WD30EFRX to the second 6GB/s -> same problem for WD-HDD, but Seagate HDD shows full speed now (still on 3GB/s port) /dev/sdc: Model=ST2000DM001-9YN164, FwRev=CC4H, SerialNo=Z24051DJ Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=3907029168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=yes: unknown setting WriteCache=enabled Drive conforms to: unknown: ATA/ATAPI-4,5,6,7 * signifies the current active mode Timing cached reads: 30046 MB in 2.00 seconds = 15038.81 MB/sec Timing buffered disk reads: 488 MB in 3.00 seconds = 162.62 MB/sec With Knoppix 7.0.3 no problems at all, shows normal speed for all drives. Any Idea? Reproducible: Always Steps to Reproduce: 1. Switch on 2. Use hdparm -t on sdb 3. Actual Results: HDD speed about 200-400 kB/sec Expected Results: HDD speed about 180 MB/sec -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 809938] New: osuse12.3, can't acces to sd card with iso format partition
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=809938 https://bugzilla.novell.com/show_bug.cgi?id=809938#c0 Summary: osuse12.3, can't acces to sd card with iso format partition Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: epistemepromeneur(a)free.fr QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=530137) --> (http://bugzilla.novell.com/attachment.cgi?id=530137) how yast disk partition manager sees the sd card User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:19.0) Gecko/20100101 Firefox/19.0 with mandriva tool i created a bootable sd card (8 Gb capacity) containing the iso of opensuse 12.3 x86_64 (4,3 Gb) then i installed with it opensuse 12.3 kde then i insert the sd card then no notification from kde notifier then i launch yast disk partition tool then i go to sdd disk (the sd card) then i see what you can see with the joined capture sd_card_partitions.png for sdd1 partition i don't know if it is an error or not for sdd2 partion it's false. it's not a hpfs/ntfs partition but an iso partition with mandriva 2010.2 i586 kde notifier presents the sd card and i can access to the iso partition with dolphin the mandriva disk manager tool sees well the iso partition i will send a capture of what this tool displays Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 895542] New: Partitions on Intel RAID (ICH10) not considered by YaST
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=895542 https://bugzilla.novell.com/show_bug.cgi?id=895542#c0 Summary: Partitions on Intel RAID (ICH10) not considered by YaST Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: Ulrich.Windl(a)rz.uni-regensburg.de QAContact: jsrain(a)suse.com Found By: --- Blocker: --- Created an attachment (id=605387) --> (http://bugzilla.novell.com/attachment.cgi?id=605387) YaST log directory as tar archive (bzip-compressed) User-Agent: Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Firefox/31.0 When trying to install openSUSE 13.1 on a system with an Intel RAID1 (ICH10), the existing partitions are ignored by YaST, so that the proposal overwrites existing partitions (like Windows). If you are not careful, you'll loose your data when installing! Reproducible: Always Steps to Reproduce: 1. Start to install openSUSE 13.1 on a system using Intel RAID (ICH10) Actual Results: Existing partitions are detected by the kernel, but are ignored by YaST Expected Results: Existing partitions should be displayed in YaST In openSUSE 12.3 YaST displays the partitions of the RAID and suggests to add new partitions, keeping existing partitions. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 943868] New: open-vm-tools cannot correctly identify available screen resolutions when running Gnome under Wayland
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

http://bugzilla.opensuse.org/show_bug.cgi?id=943868 Bug ID: 943868 Summary: open-vm-tools cannot correctly identify available screen resolutions when running Gnome under Wayland Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: clauses(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- open-vm-tools cannot correctly identify available screen resolutions when running Gnome under Wayland. Also, it can not dynamically switch the screen-resolution to fit the window-size. Under Gnome+Xorg the list of available screen-resolutions and the dynamic switching of screen-resolution works correctly. Affected versions: All Tumbleweed releases from the past ~6 months I have been using it. Leap, preview 1. Fedora 22 is also affected by this same bug. I’m using VMWare Fusion 7.X and 8. -- You are receiving this mail because: You are on the CC list for the bug.

1 5

[Bug 924683] New: fglrx driver crashes with GDM as displaymanager (default for Gnome desktop installation)
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

http://bugzilla.suse.com/show_bug.cgi?id=924683 Bug ID: 924683 Summary: fglrx driver crashes with GDM as displaymanager (default for Gnome desktop installation) Classification: openSUSE Product: openSUSE Distribution Version: 13.2 Hardware: All OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: X11 3rd Party Driver Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: sndirsch(a)suse.com QA Contact: sndirsch(a)suse.com Found By: --- Blocker: --- AMD's proprietary 'fglrx' video driver crashes when using GDM as displaymanager. This is the default when doing a GNOME desktop installation. Workaround is to use xdm instead (edit /etc/sysconfig/displaymanager:DISPLAYMANAGER). There is another workaround describedin https://oliverchang.github.io/2014/12/22/fixing-linux-amd-catalyst-linux-dr… which also explains the issue in detail. -- You are receiving this mail because: You are on the CC list for the bug.

1 5

[Bug 922400] New: kate5 pulling out kdevelop4 as kate5 does not provides kate and kate{4,5} kpart split is missing
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

http://bugzilla.opensuse.org/show_bug.cgi?id=922400 Bug ID: 922400 Summary: kate5 pulling out kdevelop4 as kate5 does not provides kate and kate{4,5} kpart split is missing Classification: openSUSE Product: openSUSE Factory Version: 201502* Hardware: x86-64 OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: baptiste(a)bapt.name QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- On latest tumbleweed 20150311 kate5 wants to remove kdevelop4 as kdevelop requires kate and kate5 does not provide kate and the kpart split is missing (unlike what has been done for konsole/konsole5 with konsole-part/konsole5-part allowing to install either konsole or konsole5 with kdevelop4). # zypper in --details kate5 Loading repository data... Reading installed packages... Resolving package dependencies... Problem: kdevelop4-4.7.1-1.1.x86_64 requires kate, but this requirement cannot be provided Solution 1: Following actions will be done: deinstallation of kdevelop4-plugin-ruby-1.6.60+20141111-3.9.x86_64 deinstallation of kate-4.14.3-1.3.x86_64 deinstallation of kdevelop4-plugin-ruby-lang-1.6.60+20141111-3.9.noarch deinstallation of kdevelop4-4.7.1-1.1.x86_64 deinstallation of kate-python-plugins-4.14.3-1.3.x86_64 deinstallation of kdevelop4-plugins-php-1.7.1-1.1.x86_64 deinstallation of kdevelop4-plugin-python-1.7.1-1.1.x86_64 deinstallation of kdevelop4-plugin-cppsupport-4.7.1-1.1.x86_64 deinstallation of kdevelop4-lang-4.7.1-1.1.noarch deinstallation of kdevelop4-plugin-python-lang-1.7.1-1.1.noarch Solution 2: do not install kate5-14.12.3-1.1.x86_64 Solution 3: do not install kate5-14.12.3-1.1.x86_64 Solution 4: break kdevelop4-4.7.1-1.1.x86_64 by ignoring some of its dependencies Thanks. -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 928413] New: gnome-disks fails to save disk settings (udisks2 fault)
by bugzilla_noreply＠novell.com 05 Aug '16

05 Aug '16

http://bugzilla.opensuse.org/show_bug.cgi?id=928413 Bug ID: 928413 Summary: gnome-disks fails to save disk settings (udisks2 fault) Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: Other OS: Other Status: CONFIRMED Severity: Normal Priority: P5 - None Component: GNOME Assignee: sbrabec(a)suse.com Reporter: sbrabec(a)suse.com QA Contact: qa-bugs(a)suse.de CC: bnc-team-gnome(a)forge.provo.novell.com Found By: --- Blocker: --- When I run gnome-disks as root, then pick a disk, go to Menu, select Drive Settings..., then do some changes and OK, I get: Error setting configuration Error creating temporary file: No such file or directory (g-io-error-quark, 1) The problem is caused by udisks2: Missing /etc/udisks2 directory. I am taking the bug and fix together with bug 912583. -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 925947] New: "ssh-agent" is not started for Gnome-wayland
by bugzilla_noreply＠novell.com 05 Aug '16

05 Aug '16

http://bugzilla.opensuse.org/show_bug.cgi?id=925947 Bug ID: 925947 Summary: "ssh-agent" is not started for Gnome-wayland Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: nrickert(a)ameritech.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:36.0) Gecko/20100101 Firefox/36.0 Build Identifier: Running Tumbleweed 20150330, with the new Gnome 3.16, and using GDM as display manager. If I select "Gnome-wayland" as the desktop session, then there is no "ssh-agent" started. However, plain Gnome (without the wayland) does start ssh-agent. This is noticed on two different computers. Reproducible: Always -- You are receiving this mail because: You are on the CC list for the bug.

1 3