May 2015 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 913686] Jack detection for Thinkpad T420 in docking station regresses to openSUSE 13.1
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

http://bugzilla.suse.com/show_bug.cgi?id=913686 --- Comment #25 from Markus Zimmermann <markus.zimmermann(a)nethead.at> --- I just tested the updated 13.2 packages and every problem I have but one is fixed. When both docking station and headphone jacks are plugged in then both output sound. Also, I noticed that when I plug in the headphone jack, that the docking station output is a little lower than without the headphone jack. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 913996] Applying Critical Updates Causes System to no longer boot (ucode-intel / ucode-amd problem?)
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

http://bugzilla.suse.com/show_bug.cgi?id=913996 --- Comment #81 from Borislav Petkov <bpetkov(a)suse.com> --- So basically 13.2 has never applied microcode successfully on that box, correct? Not even the installer kernel works. Ok, here's what you can try: * copy /lib/firmware/amd-ucode somewhere safe * remove the ucode-amd package * install the latest kernel-desktop or -default. dracut should not find the microcode, pay attention to this message: *** Generating early-microcode cpio image *** *** Constructing AuthenticAMD.bin **** it should *not* be printed. * remove "dis_ucode_ldr" from the kernel parameters * boot the new kernel * The machine should be up, when it is, move the stashed /lib/firmware/amd-ucode folder back in its place, i.e. /lib/firmware/amd-ucode * As root, do echo 1 > /sys/devices/system/cpu/microcode/reload * Send me dmesg If this works out, this should show that microcode gets updated late on that machine. Thanks. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 872430] systemctl enable pure-ftpd.service does not start pure-ftp service
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

http://bugzilla.opensuse.org/show_bug.cgi?id=872430 Tony Su <tonysu(a)su-networking.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tonysu(a)su-networking.com --- Comment #4 from Tony Su <tonysu(a)su-networking.com> --- A small comment... This may be related to YAST2 unable to start the pure-ftpd service (no output similar to what was described when attempted to start from command line). So, when this bug is fixed, the YAST applet will need to be verified working, too... else a new bug will need to be created. Only reason why I'm not completely certain the YAST issue is related is that there has been a YAST2/pure-ftpd issue since at least 13.1 and don't know if what I observed had been fixed. Hard to know when there is no output... -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 928963] Virt-manager 1.1 cant manage lxc hosts on centos 7.1 due to vte 290 missing
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

http://bugzilla.suse.com/show_bug.cgi?id=928963 Charles Arnold <carnold(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED Flags|needinfo?(harty(a)ironwolve.c | |om) | --- Comment #3 from Charles Arnold <carnold(a)suse.com> --- The set_visible_bell attribute has been removed from upstream virt-manager with git commit edf9bf0aad2319c3df58d36fb89266fa4c6e8429. As a work around, you can do as I suggested in comment #2. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 929338] openSUSE 13.2 LibreOffice does not open documents
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

http://bugzilla.opensuse.org/show_bug.cgi?id=929338 --- Comment #6 from Dirk Weber <d_werner(a)gmx.net> --- (In reply to Dirk Weber from comment #5) > This will move your personal settings of libreoffice to the directory > .config/libreoffice_bak and from libreoffice's point of view erase them. Note: in this original directory are personal settings, possibly also personal additions to spell check dictionaries and the like. If the "new" folder is working you might like to migrate files from this old directory to the new one step by step and verify that libreoffice is still working after each step. In this way you might be able to find out what caused the problem in the beginning. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 899118] Kerberized Printing to Windows AD Print Server/Share
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

http://bugzilla.suse.com/show_bug.cgi?id=899118 --- Comment #16 from Lars Müller <lmuelle(a)suse.com> --- The plan is to release the samba-krb-printing packages and patched permissions packages with the upcoming samba 4.1.18 release which is scheduled for 2015-05-05 -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 929338] openSUSE 13.2 LibreOffice does not open documents
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

http://bugzilla.opensuse.org/show_bug.cgi?id=929338 --- Comment #5 from Dirk Weber <d_werner(a)gmx.net> --- (In reply to Jim Hill from comment #3) > Thru yesterday I reloaded openSUSE 13.2, deleted both Libre Office > Repositories, de-selected all Libre Office apps, and rebooted the system. > Then I went to opensuse.org/program/libreoffice and did a reload, first with > one repository, then with both repositories. Both attempts yielded the same > results. I was able to access libreoffice writer, create new documents, > save those documents, and reopen only those newly saved documents. > > I still was not able to open calc or any of the other apps, and I cannot > open any of the documents, including write documents, I have previously > saved. As my saved and archived documents consist mainly of write and calc > docements, this is frustrating me. > > I have reduced my repositories down quite low. I have seen no error codes > or caution flags so far, but I may not have JAVA repository installed. What > is the best one to assure proper workings with LibreOffice? > > Your suggestion makes sense. After I read it I tried to find /libreoffice/ > with the System folder /etc/system config tool by using the search function. > Nothing came up. The only code editor I have showing in my tools is Linux > 32 bit Terminal. It has been at least 15 years since I was consistently > working in code, so... > is there a quick point to this code line or can you walk me thru the > steps to tackle this name change? > > Thanks... very respectfully (v/r) Uninstalling and reinstalling packages under Linux usually does not make much sense. If you work correctly (esp. not as root but as ordinary user) files which are installed from the rpm will not be corrupted. ~/ is your home directory where settings for your specific user account are stored, and this is likely were the problem is. Therefore open an xterm / console Window as ordinary user and type mv .config/libreoffice .config/libreoffice_bak [enter]. You can also use some file manager and rename this directory, but sometimes these try to be smart and protect you from yourself and don't do what you want. This will move your personal settings of libreoffice to the directory .config/libreoffice_bak and from libreoffice's point of view erase them. If you start libreoffice now it will not detect any local adaptations and create a new directory with the default settings. About repos: I recommend to use the standard repos of the distribution (OSS and non-OSS and the related update repos) and install the packages from there. They are best fitting to the distribution. Add other repos only if you have very specific needs and if you know what you are doing. Libreoffice should just work out of the box with the standard repos. Mixings things from multiple repositories is asking for trouble because you will likely get untested combinations of packages. Hope this helps. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 899118] Kerberized Printing to Windows AD Print Server/Share
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

http://bugzilla.suse.com/show_bug.cgi?id=899118 Bug 899118 depends on bug 906336, which changed state. Bug 906336 Summary: AUDIT-0: security audit for cups-backend-kerberized-smb in OBS project Printing http://bugzilla.suse.com/show_bug.cgi?id=906336 What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |DUPLICATE -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 899118] Kerberized Printing to Windows AD Print Server/Share
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

http://bugzilla.suse.com/show_bug.cgi?id=899118 --- Comment #15 from Lars Müller <lmuelle(a)suse.com> --- *** Bug 906336 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 906336] AUDIT-0: security audit for cups-backend-kerberized-smb in OBS project Printing
by bugzilla_noreply＠novell.com 04 May '15

04 May '15

1 0