November 2015 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 928328] New: VUL-1: libnettle: off-by-one in the test suite
by bugzilla_noreply＠novell.com 03 Feb '19

03 Feb '19

http://bugzilla.suse.com/show_bug.cgi?id=928328 Bug ID: 928328 Summary: VUL-1: libnettle: off-by-one in the test suite Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: Other OS: Other Status: NEW Severity: Minor Priority: P5 - None Component: Security Assignee: security-team(a)suse.de Reporter: vpereira(a)novell.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Address Sanitizer found a problem in the des-compat-test.c the line: for (i=0; i<(NUM_TESTS-1); i++) should be: for (i=0; i<(NUM_TESTS-2); i++) we found a simila problem, in the 13.2, however in Factory it was already fixed. -- You are receiving this mail because: You are on the CC list for the bug.

1 10

[Bug 663358] New: [zypper] can not install src rpm available on the local disk
by bugzilla_noreply＠novell.com 29 Jan '19

29 Jan '19

https://bugzilla.novell.com/show_bug.cgi?id=663358 https://bugzilla.novell.com/show_bug.cgi?id=663358#c0 Summary: [zypper] can not install src rpm available on the local disk Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: zypp-maintainers(a)forge.provo.novell.com ReportedBy: ma(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- While zypper in /tmp/my.rpm works by creating a temp. repo containing my.rpm, zypper si /tmp/my.src.rpm does not work. Probably possible to use the same trick here as for ordinary rpms. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 936324] New: Firefox needs restart when network device not available during start
by bugzilla_noreply＠novell.com 23 Jan '19

23 Jan '19

http://bugzilla.opensuse.org/show_bug.cgi?id=936324 Bug ID: 936324 Summary: Firefox needs restart when network device not available during start Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Firefox Assignee: bnc-team-mozilla(a)forge.provo.novell.com Reporter: novell(a)tower-net.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- My laptop has a switch to put the hardware in offline mode. So there is no ethernet, bluetooth and so on. I think it would be the same if you have some USB stick for network connection. When I start Firefox in the offline mode of the laptop and switch it online afterwards, Firefox doesn't recognize the available network connections or network interfaces. It shows the error page that the server at domain example.com could not be found. I've to quit and start Firefox again to get it work. The ping tool on console has no problem in the meantime. If the laptop has been in online mode during start of Firefox I can put it offline/online as much as I'd like. This doesn't harm Firefox. Maybe it doesn't recognize a change in the network interfaces. So to say if you would have different network interface cards and switch. But this I couldn't test. At least if you have only the local interface during start of Firefox and add another network interface for Internet connection later on, Firefox will not recognize this and can not use it. I would say that this is a bug in network software if you have to restart when network interfaces change!? -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 804607] New: wrong plymouth on multimonitor (and not visible cryptohome passphrase)
by bugzilla_noreply＠novell.com 17 Jan '19

17 Jan '19

https://bugzilla.novell.com/show_bug.cgi?id=804607 https://bugzilla.novell.com/show_bug.cgi?id=804607#c0 Summary: wrong plymouth on multimonitor (and not visible cryptohome passphrase) Classification: openSUSE Product: openSUSE Factory Version: 12.3 Beta 1 Platform: All OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: noga.dany(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:18.0) Gecko/20100101 Firefox/18.0 When booting on two monitors, plymouth animation on second monitor is displaced. And therefore is not visible request for passphrase for accessing encrypted disk. On openSUSE 12.2 is ok. Primary monitor 1600 x 900, secondary monitor 1920 x 1080 (bug found in update in RC1, but I can't set it here in bug report options) Reproducible: Always Steps to Reproduce: 1. Start boot with connected second monitor Actual Results: Wrong plymouth animation on second monitor. Is displaced cca about 10% more left and more down. Expected Results: Good position like in openSUSE 12.2 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 947426] New: mirrors.opensuse.org unnecessarily difficult to use
by bugzilla_noreply＠novell.com 15 Jan '19

15 Jan '19

http://bugzilla.opensuse.org/show_bug.cgi?id=947426 Bug ID: 947426 Summary: mirrors.opensuse.org unnecessarily difficult to use Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other URL: http://mirrors.opensuse.org/ OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Infrastructure Assignee: mrueckert(a)suse.com Reporter: mrmazda(a)earthlink.net QA Contact: lars.vogdt(a)suse.com Found By: --- Blocker: --- Created attachment 648978 --> http://bugzilla.opensuse.org/attachment.cgi?id=648978&action=edit 120 DPI fullscreen screenshot on 1920px wide screen Zoom level used for screenshot brings content text approximately equal in size to the 12pt browser default, slightly larger than the 10pt browser UI text. By the time the page is zoomed enough to be legible, the most important (newest) columns are off screen to the right, requiring horizontal scrolling to see. When right columns are scrolled to it sends each row's left column labels off screen to the left. Overall, it would be easier for more people to use if the rightmost columns were the oldest releases, less likely to be of interest, keeping the current releases and development columns closer to the row label columns. Eliminating the 12.3 columns would help some, but it wouldn't last long, with 13.1 scheduled to turn into Evergreen in just a few months, while the next Leap would be added probably even before. It might make sense to leave the ports column rightmost, but Factory/Tumbleweed ought to stay right alongside most current (ATM, Leap 42.1, followed by 13.2). -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 941186] New: Foreign glyphs in counter image
by bugzilla_noreply＠novell.com 14 Jan '19

14 Jan '19

http://bugzilla.opensuse.org/show_bug.cgi?id=941186 Bug ID: 941186 Summary: Foreign glyphs in counter image Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: iPhone OS: Apple iOS 8.x Status: NEW Severity: Minor Priority: P5 - None Component: Infrastructure Assignee: mrueckert(a)suse.com Reporter: giecrilj(a)stegny.2a.pl QA Contact: lars.vogdt(a)suse.com Found By: --- Blocker: --- The image returned by the counter server contains the text "Dołącz do nas". The glyphs "łą" are rendered using a different font than the rest of the text. -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 831921] New: unison segfaults when I try to choose a local directory
by bugzilla_noreply＠novell.com 13 Jan '19

13 Jan '19

https://bugzilla.novell.com/show_bug.cgi?id=831921 https://bugzilla.novell.com/show_bug.cgi?id=831921#c0 Summary: unison segfaults when I try to choose a local directory Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ncutler(a)suse.com QAContact: qa-bugs(a)suse.de Found By: IS&T Blocker: --- I have unison version 2.40.102-2.1.2 installed on openSUSE 12.3 (KDE, fully updated). When I run it and try to add a profile via the "Profile Creation" wizard a.k.a. Unison Profile Creation Assistant, it segfaults when I attempt to choose a local directory. The directory chooser window (which I assume is not a part of unison) flashes on the screen for a split-second. /var/log/messages says: pantograf kernel: [ 649.287711] unison[9180]: segfault at 30 ip 00007ffda011c958 sp 00007fff5cce51a0 error 4 in libgtk-x11-2.0.so.0.2400.18[7ffd9ff01000+42c000] and when I run unison in a bash shell, I get the following messages on-screen: (unison:9217): Gtk-CRITICAL **: gtk_tree_model_filter_get_value: assertion `GTK_TREE_MODEL_FILTER (model)->priv->stamp == iter->stamp' failed (unison:9217): GLib-GObject-WARNING **: gtype.c:4204: type id `0' is invalid (unison:9217): GLib-GObject-WARNING **: can't peek value table for type `<invalid>' which is not currently referenced Segmentation fault Thanks. Nathan -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 937764] New: Many YaST modules desktop files not translated in French
by bugzilla_noreply＠novell.com 08 Jan '19

08 Jan '19

http://bugzilla.opensuse.org/show_bug.cgi?id=937764 Bug ID: 937764 Summary: Many YaST modules desktop files not translated in French Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Translations Assignee: ke(a)suse.com Reporter: antoine.belvire(a)laposte.net QA Contact: ke(a)suse.com Found By: --- Blocker: --- Created attachment 640664 --> http://bugzilla.opensuse.org/attachment.cgi?id=640664&action=edit Screenshot of YaST Control Center In the YaST Control Center, many modules names and descriptions are not translated in French. For example: - Online Update - Hardware Information - Printer - Sound - /etc/sysconfig/ Editor - Kernel Settings - Services Manager … If I'm correct, most of these strings are normally translated in opensuse-i18n/trunk/lcn/fr/po/update-desktop-files-yast.fr.po: https://svn.opensuse.org/viewvc/opensuse-i18n/trunk/lcn/fr/po/update-deskto… They were fully translated with 13.1 but – I don't know why – some translations were lost with 13.2. Now the file is fully translated again. I think we need to update the desktop-translations package, which should contains these strings stripped from the desktop files. -- You are receiving this mail because: You are on the CC list for the bug.

1 5

[Bug 920792] New: KDE 5 Plasma icons are missing after upgrade
by bugzilla_noreply＠novell.com 07 Jan '19

07 Jan '19

http://bugzilla.opensuse.org/show_bug.cgi?id=920792 Bug ID: 920792 Summary: KDE 5 Plasma icons are missing after upgrade Classification: openSUSE Product: openSUSE Distribution Version: 13.2 Hardware: Other OS: Other Status: NEW Severity: Major Priority: P5 - None Component: KDE4 Workspace Assignee: kde-maintainers(a)suse.de Reporter: szotsaki(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 625485 --> http://bugzilla.opensuse.org/attachment.cgi?id=625485&action=edit Missing icons everywhere After an upgrade all the breeze icons are missing and replaced by either blank space or a black square. I attach a screenshot which shows that in the K menu you can see just blank icons while in KWrite and in SystemSettings no icons at all. Interestingly, KDE 4 applications are not affected, they can show the default breeze icons. The following breeze packages are installed: S | Name | Summary | Type --+--------------------+-------------------------------------------+-------- i | breeze | Plasma Desktop artwork, styles and assets | package i | breeze4-style | Plasma Desktop artwork, styles and assets | package i | breeze5-decoration | Plasma Desktop artwork, styles and assets | package i | breeze5-style | Plasma Desktop artwork, styles and assets | package i | breeze5-cursors | Plasma Desktop artwork, styles and assets | package i | breeze5-icons | Plasma Desktop artwork, styles and assets | package i | breeze5-style-lang | Languages for package breeze | package i | breeze5-wallpapers | Plasma Desktop artwork, styles and assets | package I'm using the following KDE 5 repositories: - http://download.opensuse.org/repositories/KDE:/Frameworks5/openSUSE_13.2/ - http://download.opensuse.org/repositories/KDE:/Qt5/openSUSE_13.2/ -- You are receiving this mail because: You are on the CC list for the bug.

1 22

[Bug 953130] New: zypper up "checking for file conflicts" takes 3.5 cpu-minutes for 32 packages
by bugzilla_noreply＠novell.com 03 Jan '19

03 Jan '19

http://bugzilla.opensuse.org/show_bug.cgi?id=953130 Bug ID: 953130 Summary: zypper up "checking for file conflicts" takes 3.5 cpu-minutes for 32 packages Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.1 Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: koenig(a)linux.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:41.0) Gecko/20100101 Firefox/41.0 Build Identifier: just run "zypper up" again, and for 32 RPMs the Checking for file conflicts: ..................................<48%>===========================================[|] took > 3.5 minutes cpu time (mostly at the 48% 'location'. that sucks! comparing even a huge list of files shouldn't take that long -- maybe do some intelligent sorting/indexing of filename lists ?! this is the update summary from zypper, more details on request: Reading installed packages... The following 13 NEW packages are going to be installed: crash-kmp-default-7.1.3_k4.1.12_1-4.14 crash-kmp-xen-7.1.3_k4.1.12_1-4.14 hdjmod-kmp-xen-1.28_k4.1.12_1-23.17 kernel-default-4.1.12-1.1 kernel-default-devel-4.1.12-1.1 kernel-devel-4.1.12-1.1 kernel-pv-devel-4.1.12-1.1 kernel-source-4.1.12-1.1 kernel-syms-4.1.12-1.1 kernel-xen-4.1.12-1.1 kernel-xen-devel-4.1.12-1.1 lttng-modules-kmp-default-2.7.0_k4.1.12_1-1.6 xen-kmp-default-4.5.1_10_k4.1.12_1-1.4 The following 19 packages are going to be upgraded: crash install-initrd-openSUSE kernel-macros lttng-modules package-translations virtualbox virtualbox-guest-kmp-default virtualbox-guest-tools virtualbox-guest-x11 virtualbox-host-kmp-default virtualbox-qt xen xen-doc-html xen-libs xen-tools yast2-kdump yast2-ntp-client yast2-storage yast2-storage-devel 19 packages to upgrade, 13 new. Overall download size: 251.4 MiB. Already cached: 0 B. After the operation, additional 980.8 MiB will be used. Continue? [y/n/? shows all options] (y): Reproducible: Always Actual Results: takes too much time, too slow Expected Results: should be *much* faster ;-) you ask, I'll provide... -- You are receiving this mail because: You are on the CC list for the bug.

1 35