October 2015 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 911623] New: Bluetooth will not pair a headset
by bugzilla_noreply＠novell.com 17 Dec '20

17 Dec '20

http://bugzilla.opensuse.org/show_bug.cgi?id=911623 Bug ID: 911623 Summary: Bluetooth will not pair a headset Classification: openSUSE Product: openSUSE Distribution Version: 13.2 Hardware: x86-64 OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: bbagger(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When trying to pair a Bluetooh headset (BPM X1 Headphones) the operations times out, and the following appears in /var/log/messages: ==== 112416+01:00 yosie kernel: [ 4397.298229] ------------[ cut here ]------------ 2015-01-04T19:25:28.112450+01:00 yosie kernel: [ 4397.298288] WARNING: CPU: 1 PID: 28817 at ../net/bluetooth/hci_conn.c:296 hci_conn_timeout+0x4a/0x280 [bluetooth]() 2015-01-04T19:25:28.112454+01:00 yosie kernel: [ 4397.298293] Modules linked in: fuse nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver nfs lockd sunrpc fscache rfcomm iscsi_ibft iscsi_boot_sysfs af_packet bnep ecb btusb bluetooth 6lowpan_iphc raid1 uvcvideo md_mod videobuf2_vmalloc snd_usb_audio videobuf2_memops videobuf2_core snd_usbmidi_lib v4l2_common videodev eeepc_wmi asus_wmi sparse_keymap rfkill video kvm_amd kvm snd_hda_codec_realtek snd_hda_codec_generic serio_raw snd_hda_codec_hdmi pcspkr k10temp snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep r8169 mii snd_ens1371 snd_rawmidi snd_ac97_codec snd_pcm shpchp ac97_bus gameport i2c_piix4 wmi tpm_infineon tpm_tis tpm acpi_cpufreq button processor snd_seq snd_seq_device snd_timer snd soundcore ata_generic pata_atiixp ohci_pci radeon sr_mod cdrom i2c_algo_bit drm_kms_helper ttm drm xhci_hcd dm_mirror dm_region_hash dm_log dm_mod sg 2015-01-04T19:25:28.112458+01:00 yosie kernel: [ 4397.298411] CPU: 1 PID: 28817 Comm: kworker/u9:0 Tainted: G W 3.16.7-7-desktop #1 2015-01-04T19:25:28.112461+01:00 yosie kernel: [ 4397.298416] Hardware name: System manufacturer System Product Name/F1A75-M-PRO R2.0, BIOS 5010 08/09/2012 2015-01-04T19:25:28.112464+01:00 yosie kernel: [ 4397.298446] Workqueue: hci0 hci_conn_timeout [bluetooth] 2015-01-04T19:25:28.112467+01:00 yosie kernel: [ 4397.298451] 0000000000000009 ffffffff8161bd03 0000000000000000 ffffffff8105cad7 2015-01-04T19:25:28.112469+01:00 yosie kernel: [ 4397.298458] ffff8800b8cfa8b8 00000000ffffffff ffff8800b8cfa800 ffff88021158a900 2015-01-04T19:25:28.112472+01:00 yosie kernel: [ 4397.298465] 0000000000000000 ffffffffa05c3d3a ffffffff8161e59d ffff8800b8cfa8b8 2015-01-04T19:25:28.112474+01:00 yosie kernel: [ 4397.298471] Call Trace: 2015-01-04T19:25:28.112477+01:00 yosie kernel: [ 4397.298499] [<ffffffff810051ee>] dump_trace+0x8e/0x350 2015-01-04T19:25:28.112479+01:00 yosie kernel: [ 4397.298511] [<ffffffff81005556>] show_stack_log_lvl+0xa6/0x190 2015-01-04T19:25:28.112482+01:00 yosie kernel: [ 4397.298521] [<ffffffff81006c51>] show_stack+0x21/0x50 2015-01-04T19:25:28.112484+01:00 yosie kernel: [ 4397.298532] [<ffffffff8161bd03>] dump_stack+0x49/0x6a 2015-01-04T19:25:28.112487+01:00 yosie kernel: [ 4397.298543] [<ffffffff8105cad7>] warn_slowpath_common+0x77/0x90 2015-01-04T19:25:28.112489+01:00 yosie kernel: [ 4397.298576] [<ffffffffa05c3d3a>] hci_conn_timeout+0x4a/0x280 [bluetooth] 2015-01-04T19:25:28.112584+01:00 yosie kernel: [ 4397.298640] [<ffffffff810770fd>] process_one_work+0x16d/0x460 2015-01-04T19:25:28.112596+01:00 yosie kernel: [ 4397.298651] [<ffffffff810779e5>] worker_thread+0x115/0x5102015-01-04T19:25:28.112416+01:00 yosie kernel: [ 4397.298229] ------------[ cut here ]------------ 2015-01-04T19:25:28.112450+01:00 yosie kernel: [ 4397.298288] WARNING: CPU: 1 PID: 28817 at ../net/bluetooth/hci_conn.c:296 hci_conn_timeout+0x4a/0x280 [bluetooth]() 2015-01-04T19:25:28.112454+01:00 yosie kernel: [ 4397.298293] Modules linked in: fuse nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver nfs lockd sunrpc fscache rfcomm iscsi_ibft iscsi_boot_sysfs af_packet bnep ecb btusb bluetooth 6lowpan_iphc raid1 uvcvideo md_mod videobuf2_vmalloc snd_usb_audio videobuf2_memops videobuf2_core snd_usbmidi_lib v4l2_common videodev eeepc_wmi asus_wmi sparse_keymap rfkill video kvm_amd kvm snd_hda_codec_realtek snd_hda_codec_generic serio_raw snd_hda_codec_hdmi pcspkr k10temp snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep r8169 mii snd_ens1371 snd_rawmidi snd_ac97_codec snd_pcm shpchp ac97_bus gameport i2c_piix4 wmi tpm_infineon tpm_tis tpm acpi_cpufreq button processor snd_seq snd_seq_device snd_timer snd soundcore ata_generic pata_atiixp ohci_pci radeon sr_mod cdrom i2c_algo_bit drm_kms_helper ttm drm xhci_hcd dm_mirror dm_region_hash dm_log dm_mod sg 2015-01-04T19:25:28.112458+01:00 yosie kernel: [ 4397.298411] CPU: 1 PID: 28817 Comm: kworker/u9:0 Tainted: G W 3.16.7-7-desktop #1 2015-01-04T19:25:28.112461+01:00 yosie kernel: [ 4397.298416] Hardware name: System manufacturer System Product Name/F1A75-M-PRO R2.0, BIOS 5010 08/09/2012 2015-01-04T19:25:28.112464+01:00 yosie kernel: [ 4397.298446] Workqueue: hci0 hci_conn_timeout [bluetooth] 2015-01-04T19:25:28.112467+01:00 yosie kernel: [ 4397.298451] 0000000000000009 ffffffff8161bd03 0000000000000000 ffffffff8105cad7 2015-01-04T19:25:28.112469+01:00 yosie kernel: [ 4397.298458] ffff8800b8cfa8b8 00000000ffffffff ffff8800b8cfa800 ffff88021158a900 2015-01-04T19:25:28.112472+01:00 yosie kernel: [ 4397.298465] 0000000000000000 ffffffffa05c3d3a ffffffff8161e59d ffff8800b8cfa8b8 2015-01-04T19:25:28.112474+01:00 yosie kernel: [ 4397.298471] Call Trace: 2015-01-04T19:25:28.112477+01:00 yosie kernel: [ 4397.298499] [<ffffffff810051ee>] dump_trace+0x8e/0x350 2015-01-04T19:25:28.112479+01:00 yosie kernel: [ 4397.298511] [<ffffffff81005556>] show_stack_log_lvl+0xa6/0x190 2015-01-04T19:25:28.112482+01:00 yosie kernel: [ 4397.298521] [<ffffffff81006c51>] show_stack+0x21/0x50 2015-01-04T19:25:28.112484+01:00 yosie kernel: [ 4397.298532] [<ffffffff8161bd03>] dump_stack+0x49/0x6a 2015-01-04T19:25:28.112487+01:00 yosie kernel: [ 4397.298543] [<ffffffff8105cad7>] warn_slowpath_common+0x77/0x90 2015-01-04T19:25:28.112489+01:00 yosie kernel: [ 4397.298576] [<ffffffffa05c3d3a>] hci_conn_timeout+0x4a/0x280 [bluetooth] 2015-01-04T19:25:28.112584+01:00 yosie kernel: [ 4397.298640] [<ffffffff810770fd>] process_one_work+0x16d/0x460 2015-01-04T19:25:28.112596+01:00 yosie kernel: [ 4397.298651] [<ffffffff810779e5>] worker_thread+0x115/0x510 2015-01-04T19:25:28.112598+01:00 yosie kernel: [ 4397.298662] [<ffffffff8107dd5d>] kthread+0xbd/0xe0 2015-01-04T19:25:28.112601+01:00 yosie kernel: [ 4397.298672] [<ffffffff8162297c>] ret_from_fork+0x7c/0xb0 2015-01-04T19:25:28.112604+01:00 yosie kernel: [ 4397.298681] ---[ end trace 4772ff5681be4670 ]--- 2015-01-04T19:25:28.194795+01:00 yosie bluetoothd[1061]: connect error: Software caused connection abort (103) 2015-01-04T19:25:28.112598+01:00 yosie kernel: [ 4397.298662] [<ffffffff8107dd5d>] kthread+0xbd/0xe0 2015-01-04T19:25:28.112601+01:00 yosie kernel: [ 4397.298672] [<ffffffff8162297c>] ret_from_fork+0x7c/0xb0 2015-01-04T19:25:28.112604+01:00 yosie kernel: [ 4397.298681] ---[ end trace 4772ff5681be4670 ]--- 2015-01-04T19:25:28.194795+01:00 yosie bluetoothd[1061]: connect error: Software caused connection abort (103) ===== I have tried to pair the same headset on a live Rosa setup, and there it works as expected. -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 928020] New: RTL8723be wireless card disconnects
by bugzilla_noreply＠novell.com 21 Nov '20

21 Nov '20

http://bugzilla.opensuse.org/show_bug.cgi?id=928020 Bug ID: 928020 Summary: RTL8723be wireless card disconnects Classification: openSUSE Product: openSUSE Distribution Version: 13.2 Hardware: x86-64 OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: roeland.jansen(a)snow.nl QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- hardware: HP Probook 450G2; wireless is RTL8723BE on several different access points (cisco, fritzbox huawei, kpn box, samsung galaxy s4 as ap): traffic stops and you are not able to ping the default gateway anymore. It seems to be random. Sometimes it keeps running for hours; other times it breaks after 10 minutes. The same hardware with windows 8.1 keeps the connection. commands like ""iwlist wlan0 scanning fails at this point with wlan0 Failed to read scan data : Resource temporarily unavailable. at this time. If I # rmmod rtl8723be # rtl8723_common # modprobe rtl8723be the wireless network is functional again. if logs are needed, let me know what you want to look at -- the current logs don't show obvious things. -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 937020] New: pdfcsplain ommits czech characters
by bugzilla_noreply＠novell.com 26 Aug '20

26 Aug '20

http://bugzilla.opensuse.org/show_bug.cgi?id=937020 Bug ID: 937020 Summary: pdfcsplain ommits czech characters Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: martin.jakl(a)qbicon.cz QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/43.0.2357.130 Safari/537.36 Build Identifier: pdfcsplain from texlive ommits czech characters from resulting pdf document. At first it complained that there are some files generated with pdftex, so I've run sudo fmtutil --all, after that it works, but results are not correct. Reproducible: Always Steps to Reproduce: 1. install texlive 2. run 'sudo fmtutil --all' 3. run pdfcsplain test.tex 4. compare resulting pdf with test-13.2.pdf -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 934495] New: Firefox is in English even when Czech translation is installed and enabled
by bugzilla_noreply＠novell.com 29 Jul '20

29 Jul '20

http://bugzilla.suse.com/show_bug.cgi?id=934495 Bug ID: 934495 Summary: Firefox is in English even when Czech translation is installed and enabled Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Firefox Assignee: bnc-team-mozilla(a)forge.provo.novell.com Reporter: vpelcak(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hello. I have installed MozillaFirefox-translations-common-38.0.6-1.1.x86_64 and enabled Czech language in Add-ons -> Languages. However after start of Firefox it is still in English language. -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 941629] New: config.rpath from gettext-tools adds unnessary rpaths in x86_64 builds
by bugzilla_noreply＠novell.com 09 Jul '20

09 Jul '20

http://bugzilla.opensuse.org/show_bug.cgi?id=941629 Bug ID: 941629 Summary: config.rpath from gettext-tools adds unnessary rpaths in x86_64 builds Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: x86-64 OS: All Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software Assignee: pth(a)suse.com Reporter: i(a)marguerite.su QA Contact: opensuse-communityscreening(a)forge.provo.novell.com Found By: Community User Blocker: --- Hi, I found two unnessary rpaths are added to LDFLAGS during building Cinnamon: https://build.opensuse.org/build/home:MargueriteSu:branches:X11:Cinnamon:Fa… <pre> [ 98s] libtool: link: gcc -fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -Wmissing-prototypes -o test-theme st/test_theme-test-theme.o ./.libs/libst-1.0.a -lclutter-1.0 -lcogl-path -lcogl-pango -lcogl -lgmodule-2.0 -lwayland-egl -lgbm -ldrm -lEGL -lXrandr -ljson-glib-1.0 -lwayland-cursor -lwayland-client -lxkbcommon -lwayland-server -lXext -lXdamage -lXfixes -lXcomposite -lXi -lcroco-0.6 /usr/lib64/libxml2.so -ldl -lz -llzma -lm -lcinnamon-desktop -lgtk-3 -lgdk-3 -lpangocairo-1.0 -lpango-1.0 -latk-1.0 -lcairo-gobject -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lX11 -pthread -Wl,-rpath -Wl,/usr/lib64 -Wl,-rpath -Wl,/usr/lib64 </pre> by grep in the build directory, I found those two rpaths comes from config.rpath: <pre> d_shlibs=yes if test "$with_gnu_ld" = yes; then # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. # Unlike libtool, we use -rpath here, not --rpath, since the documented # option of GNU ld is called -rpath, not --rpath. hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' case "$host_os" in </pre> it seems that x86_64 didn't pass the host_os test. please have a look -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 943628] New: Networkmanager looses Wi-Fi connection
by bugzilla_noreply＠novell.com 06 Jul '20

06 Jul '20

http://bugzilla.opensuse.org/show_bug.cgi?id=943628 Bug ID: 943628 Summary: Networkmanager looses Wi-Fi connection Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: armv5 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: freek(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I have Raspberry Pi 1B system with a Wi-Fi USB interface running one of the latest Tumbleweed openSUSE images. After installation of the image I added nmcli-dmenu without recommends. I disabled wicked and enabled NetworkManager. Using nmtui I configured the wlan0 interface with a fixed IP address and the required other network parameters. When I boot the system without a connected Ethernet cable, the system comes up with an active Wi-Fi connection. The system is relatively far from the AP. So when I run a ping to the default gateway I always have a few percent loss. When I leave the system running for a few days a see each few hours - no fixed interval - a "Connection disconnected" with different reasons in the journal. At a certain moment I see "Activation: failed" to the AP. The system remains at the same location. After that NM does not try to re-establish the connection, so the system is not reachable anymore. When I connect the Ethernet cable I have access to the system again. Restarting the network.service re-establishes the Wi-Fi connection, so I can pull the Ethernet cable and still have a connection via Wi-Fi. I would expect NM to continuously try to re-establish the Wi-Fi connection. -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 915168] New: During boot message i2c_hid i2c-SYN1B7E:01: failed to retrieve report from device. is shown
by bugzilla_noreply＠novell.com 06 Jul '20

06 Jul '20

http://bugzilla.opensuse.org/show_bug.cgi?id=915168 Bug ID: 915168 Summary: During boot message i2c_hid i2c-SYN1B7E:01: failed to retrieve report from device. is shown Classification: openSUSE Product: openSUSE Factory Version: 201501* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: freek(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- On my Acer laptop with Intel N3530 and apparently a touchpad with name SYN1B7E I see the following: During boot message: i2c_hid i2c-SYN1B7E:01: failed to retrieve report from device. is shown. Ifound some reference about this device in http://www.adamdrew.net/?tag=kernel -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 932495] New: telepathy-haze SIGTRAP: tp-glib", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=args@entry=0x7ffc4614b998) at gmessages.c:1046
by bugzilla_noreply＠novell.com 26 Jun '20

26 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=932495 Bug ID: 932495 Summary: telepathy-haze SIGTRAP: tp-glib", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=args@entry=0x7ffc4614b998) at gmessages.c:1046 Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: mpluskal(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 635636 --> http://bugzilla.opensuse.org/attachment.cgi?id=635636&action=edit backtrace telepathy-haze random SIGTRAP: #0 g_logv (log_domain=0x7f4ee1ef2806 "tp-glib", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=args@entry=0x7ffc4614b998) at gmessages.c:1046 #1 0x00007f4ee220ebe2 in g_log (log_domain=log_domain@entry=0x7f4ee1ef2806 "tp-glib", log_level=log_level@entry=G_LOG_LEVEL_CRITICAL, format=format@entry=0x7f4ee225615d "%s: assertion '%s' failed") at gmessages.c:1079 #2 0x00007f4ee220ec09 in g_return_if_fail_warning (log_domain=log_domain@entry=0x7f4ee1ef2806 "tp-glib", pretty_function=pretty_function@entry=0x7f4ee1efe4c0 <__func__.31694> "tp_base_connection_finish_shutdown", expression=<optimized out>) at gmessages.c:1088 #3 0x00007f4ee1df2e7c in tp_base_connection_finish_shutdown (self=<optimized out>) at base-connection.c:2905 #4 0x0000000000413eec in idle_finish_shutdown (data=0x872150) at connection.c:317 #5 0x00007f4ee2207b55 in g_main_dispatch (context=0x796350) at gmain.c:3122 #6 g_main_context_dispatch (context=context@entry=0x796350) at gmain.c:3737 #7 0x00007f4ee2207ec8 in g_main_context_iterate (context=0x796350, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3808 #8 0x00007f4ee220818a in g_main_loop_run (loop=0x836650) at gmain.c:4002 #9 0x00007f4ee1ecb654 in tp_run_connection_manager (prog_name=prog_name@entry=0x422425 "haze", version=version@entry=0x4222f3 "0.8.0", construct_cm=construct_cm@entry=0x410150 <get_cm>, argc=argc@entry=1, argv=argv@entry=0x7ffc4614bcc8) at run.c:284 #10 0x000000000041001b in main (argc=1, argv=0x7ffc4614bcc8) at main.c:267 -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 931435] New: gdm-session-worker sigabrt
by bugzilla_noreply＠novell.com 26 Jun '20

26 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=931435 Bug ID: 931435 Summary: gdm-session-worker sigabrt Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: os.gnome.maintainers(a)gmail.com Reporter: mpluskal(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 634690 --> http://bugzilla.opensuse.org/attachment.cgi?id=634690&action=edit backtrace After reboot with recent factory, gdm is terminated, after that it is restarted and works fine. backtrace: Core was generated by `gdm-session-worker [pam/gdm-launch-environment]'. Program terminated with signal SIGABRT, Aborted. #0 0x00007fae7aa623c7 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:55 55 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory. (gdb) bt #0 0x00007fae7aa623c7 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:55 #1 0x00007fae7aa6379a in __GI_abort () at abort.c:78 #2 0x00007fae7b8e61b5 in g_assertion_message (domain=domain@entry=0x7fae7b66069a "AccountsService", file=file@entry=0x7fae7b661200 "act-user-manager.c", line=line@entry=2564, func=func@entry=0x7fae7b663978 <__FUNCTION__.27349> "load_users", message=message@entry=0x13f5630 "assertion failed: (manager->priv->accounts_proxy != NULL)") at gtestutils.c:2356 #3 0x00007fae7b8e624a in g_assertion_message_expr (domain=domain@entry=0x7fae7b66069a "AccountsService", file=file@entry=0x7fae7b661200 "act-user-manager.c", line=line@entry=2564, func=func@entry=0x7fae7b663978 <__FUNCTION__.27349> "load_users", expr=expr@entry=0x7fae7b662390 "manager->priv->accounts_proxy != NULL") at gtestutils.c:2371 #4 0x00007fae7b64bc66 in load_users (manager=0x13dc100) at act-user-manager.c:2564 #5 load_idle (manager=0x13dc100) at act-user-manager.c:2615 #6 0x00007fae7b8c1b55 in g_main_dispatch (context=0x13d81f0) at gmain.c:3122 #7 g_main_context_dispatch (context=context@entry=0x13d81f0) at gmain.c:3737 #8 0x00007fae7b8c1ec8 in g_main_context_iterate (context=0x13d81f0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3808 #9 0x00007fae7b8c218a in g_main_loop_run (loop=0x13f2c10) at gmain.c:4002 #10 0x0000000000408b34 in main (argc=1, argv=0x7fff4d13b0f8) at session-worker-main.c:132 -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 934043] New: gdm segfault: gdm-session-worker-job.c: Permission denied
by bugzilla_noreply＠novell.com 26 Jun '20

26 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=934043 Bug ID: 934043 Summary: gdm segfault: gdm-session-worker-job.c: Permission denied Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: mpluskal(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 637131 --> http://bugzilla.opensuse.org/attachment.cgi?id=637131&action=edit backtrace It seems that gdm have recently died several times with following: Program terminated with signal SIGSEGV, Segmentation fault. #0 0x0000000000420b31 in gdm_session_worker_job_spawn (name=0x2606c00 "`�^\002", session_worker_job=0x26198d0) at gdm-session-worker-job.c:295 295 gdm-session-worker-job.c: Permission denied. (gdb) bt #0 0x0000000000420b31 in gdm_session_worker_job_spawn (name=0x2606c00 "`�^\002", session_worker_job=0x26198d0) at gdm-session-worker-job.c:295 #1 gdm_session_worker_job_start (session_worker_job=0x26198d0, name=name@entry=0x26194a0 "gdm-session-worker [pam/gdm-launch-environment]") at gdm-session-worker-job.c:324 #2 0x000000000041d502 in start_conversation (service_name=0x440c28 "gdm-launch-environment", self=0x26036a0) at gdm-session.c:1851 #3 gdm_session_start_conversation (self=0x26036a0, service_name=service_name@entry=0x440c28 "gdm-launch-environment") at gdm-session.c:1924 #4 0x0000000000414fed in gdm_launch_environment_start (launch_environment=0x24ad1c0) at gdm-launch-environment.c:509 #5 0x000000000041267c in gdm_display_start_greeter_session (self=self@entry=0x1ccb820) at gdm-display.c:1509 #6 0x000000000041779a in set_up_greeter_session (display=0x1ccb820, manager=0x1ccb220) at gdm-manager.c:1779 #7 on_display_status_changed (display=0x1ccb820, arg1=<optimized out>, manager=0x1ccb220) at gdm-manager.c:1834 #8 0x00007f709a15a018 in g_closure_invoke (closure=0x261a6b0, return_value=0x0, n_param_values=2, param_values=0x7ffc15e42c50, invocation_hint=0x7ffc15e42bf0) at gclosure.c:768 #9 0x00007f709a16b22d in signal_emit_unlocked_R (node=node@entry=0x1cbbdf0, detail=detail@entry=240, instance=instance@entry=0x1ccb820, emission_return=emission_return@entry=0x0, instance_and_params=instance_and_params@entry=0x7ffc15e42c50) at gsignal.c:3549 #10 0x00007f709a172da8 in g_signal_emit_valist (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>, var_args=var_args@entry=0x7ffc15e42de8) at gsignal.c:3305 #11 0x00007f709a173062 in g_signal_emit (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>) at gsignal.c:3361 #12 0x00007f709a15e3a5 in g_object_dispatch_properties_changed (object=0x1ccb820, n_pspecs=16, pspecs=0x0) at gobject.c:1056 #13 0x00007f709a160793 in g_object_notify_by_spec_internal (pspec=<optimized out>, object=0x1ccb820) at gobject.c:1150 #14 g_object_notify (object=0x1ccb820, property_name=property_name@entry=0x43f7ae "status") at gobject.c:1197 #15 0x000000000041030b in _gdm_display_set_status (self=self@entry=0x1ccb820, status=status@entry=1) at gdm-display.c:527 #16 0x00000000004106a0 in gdm_display_real_prepare (self=0x1ccb820) at gdm-display.c:538 #17 0x00000000004137e1 in gdm_local_display_prepare (display=0x1ccb820) at gdm-local-display.c:143 #18 0x0000000000411df1 in gdm_display_prepare (self=self@entry=0x1ccb820) at gdm-display.c:601 #19 0x0000000000411f3f in gdm_display_manage (self=self@entry=0x1ccb820) at gdm-display.c:618 #20 0x000000000040f2ca in create_display (factory=factory@entry=0x1cd6af0, seat_id=0x2614dd0 "seat0", session_type=0x25bfa40 "wayland", initial=1) at gdm-local-display-factory.c:427 #21 0x000000000040f4e5 in on_display_status_changed (display=0x1ccb420, arg1=<optimized out>, factory=0x1cd6af0) at gdm-local-display-factory.c:320 #22 0x00007f709a15a018 in g_closure_invoke (closure=0x2600300, return_value=0x0, n_param_values=2, param_values=0x7ffc15e43230, invocation_hint=0x7ffc15e431d0) at gclosure.c:768 #23 0x00007f709a16b22d in signal_emit_unlocked_R (node=node@entry=0x1cbbdf0, detail=detail@entry=240, instance=instance@entry=0x1ccb420, emission_return=emission_return@entry=0x0, instance_and_params=instance_and_params@entry=0x7ffc15e43230) at gsignal.c:3549 #24 0x00007f709a172da8 in g_signal_emit_valist (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>, var_args=var_args@entry=0x7ffc15e433c8) at gsignal.c:3305 #25 0x00007f709a173062 in g_signal_emit (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>) at gsignal.c:3361 #26 0x00007f709a15e3a5 in g_object_dispatch_properties_changed (object=0x1ccb420, n_pspecs=16, pspecs=0x0) at gobject.c:1056 #27 0x00007f709a160793 in g_object_notify_by_spec_internal (pspec=<optimized out>, object=0x1ccb420) at gobject.c:1150 #28 g_object_notify (object=0x1ccb420, property_name=property_name@entry=0x43f7ae "status") at gobject.c:1197 #29 0x000000000041030b in _gdm_display_set_status (self=self@entry=0x1ccb420, status=status@entry=3) at gdm-display.c:527 #30 0x0000000000411fe8 in gdm_display_finish (self=0x1ccb420) at gdm-display.c:645 #31 0x0000000000412034 in finish_idle (self=<optimized out>) at gdm-display.c:509 #32 0x00007f7099e85b55 in g_main_dispatch (context=0x1ccc950) at gmain.c:3122 #33 g_main_context_dispatch (context=context@entry=0x1ccc950) at gmain.c:3737 #34 0x00007f7099e85ec8 in g_main_context_iterate (context=0x1ccc950, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3808 #35 0x00007f7099e8618a in g_main_loop_run (loop=0x1cd9190) at gmain.c:4002 #36 0x000000000040ca16 in main (argc=1, argv=0x7ffc15e437f8) at main.c:426 -- You are receiving this mail because: You are on the CC list for the bug.

2 2