August 2014 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 891807] New: inputting unicode characters in 32bit QT applications became impossible.
by bugzilla_noreply＠novell.com 19 Aug '14

19 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=891807 https://bugzilla.novell.com/show_bug.cgi?id=891807#c0 Summary: inputting unicode characters in 32bit QT applications became impossible. Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: zhanshime(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Firefox/31.0 opensuse13.1 gnome 64bit i can't iput no-latin characters in 32bit QT applications run 32bit Qt applications in console zhan@linun2:~> skype QIconvCodec::convertFromUnicode: using Latin-1 for conversion, iconv_open failed QIconvCodec::convertToUnicode: using Latin-1 for conversion, iconv_open failed Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 866596] New: NetworkManager Applet does not show available networks
by bugzilla_noreply＠novell.com 18 Aug '14

18 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=866596 https://bugzilla.novell.com/show_bug.cgi?id=866596#c0 Summary: NetworkManager Applet does not show available networks Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: suse-list3(a)bout-tyme.net QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=580772) --> (http://bugzilla.novell.com/attachment.cgi?id=580772) Blank NM applet User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:27.0) Gecko/20100101 Firefox/27.0 Running 13.1 TumbleWeed with latest updates. Toshiba laptop L75D-A7288 toshiba-lt:~ # lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8550G] 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller 00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port 00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09) 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 16) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter (rev 01) toshiba-lt:~ # I have been having problems with the NM widget not showing available networks whether it be wired or wireless. Works fine when logged in as root. Found the following errors in /var/log/messages; ************************************************** Feb 22 17:42:08 toshiba-lt systemd: pam_unix(systemd-user:session): session opened for user ken by (uid=0) Feb 22 17:42:08 toshiba-lt systemd[2340]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socke t: No such file or directory Feb 22 17:42:09 toshiba-lt systemd[2340]: Stopped target Sound Card. Feb 22 17:42:09 toshiba-lt systemd[2340]: Starting Default. Feb 22 17:42:09 toshiba-lt systemd[2340]: Reached target Default. Feb 22 17:42:09 toshiba-lt systemd[2340]: Startup finished in 300ms. Feb 22 17:42:09 toshiba-lt systemd[1]: Started User Manager for 1000. Feb 22 17:42:09 toshiba-lt checkproc: checkproc: can not get session id for process 1371! Feb 22 17:42:10 toshiba-lt dbus[537]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.69" (uid=1000 pid=2476 co mm="kdeinit4: kded4 [kdeinit] ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=555 comm="/usr/sbin/NetworkManager --no-daemon ") Feb 22 17:42:10 toshiba-lt dbus[537]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.69" (uid=1000 pid=2476 co mm="kdeinit4: kded4 [kdeinit] ") interface="org.freedesktop.NetworkManager" member="GetDevices" error name="(unset)" requ ested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=555 comm="/usr/sbin/NetworkManager --no-daemon ") Feb 22 17:42:11 toshiba-lt dbus[537]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper) Feb 22 17:42:11 toshiba-lt dbus[537]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper' Feb 22 17:42:13 toshiba-lt dbus[537]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.69" (uid=1000 pid=2476 co mm="kdeinit4: kded4 [kdeinit] ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=555 comm="/usr/sbin/NetworkManager --no-daemon ") Feb 22 17:42:13 toshiba-lt dbus[537]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.69" (uid=1000 pid=2476 co mm="kdeinit4: kded4 [kdeinit] ") interface="org.freedesktop.NetworkManager" member="state" error name="(unset)" requested _reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=555 comm="/usr/sbin/NetworkManager --no-daemon ") Feb 22 17:42:13 toshiba-lt dbus[537]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.73" (uid=1000 pid=2516 co mm="kdeinit4: plasma-desktop [kdeinit] ") interface="org.freedesktop.DBus.Properties" member="Get" error name="(unset)" requested_ reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=555 comm="/usr/sbin/NetworkManager --no-daemon ") Feb 22 17:42:13 toshiba-lt dbus[537]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.73" (uid=1000 pid=2516 co mm="kdeinit4: plasma-desktop [kdeinit] ") interface="org.freedesktop.NetworkManager" member="state" error name="(unset)" requested _reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=555 comm="/usr/sbin/NetworkManager --no-daemon ") Feb 22 17:42:13 toshiba-lt dbus[537]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.73" (uid=1000 pid=2516 co mm="kdeinit4: plasma-desktop [kdeinit] ") interface="org.freedesktop.DBus.Properties" member="Get" error name="(unset)" requested_ reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=555 comm="/usr/sbin/NetworkManager --no-daemon ") Feb 22 17:42:13 toshiba-lt dbus: Last message '[system] Rejected se' repeated 4 times, suppressed by syslog-ng on toshiba-lt *************************************** Not sure if it is a dbus problem or not. Problem seems to come and go depending on updates that get installed. I install updates, the applet works fine - install next batch of updates the applet is empty again. Reproducible: Always Steps to Reproduce: 1.Start laptop 2.login to KDE desktop 3.Look at empty desktop applet 4. "Manage Connections" shows all available network types greyed out. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 889660] New: nVidia proprietary driver does not consistently resume from sleep/suspend.
by bugzilla_noreply＠novell.com 18 Aug '14

18 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=889660 https://bugzilla.novell.com/show_bug.cgi?id=889660#c0 Summary: nVidia proprietary driver does not consistently resume from sleep/suspend. Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: All OS/Version: openSUSE 13.1 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: gordon(a)dickens.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Firefox/31.0 Resume from sleep/suspend does not work consistently with the nVidia proprietary device drivers. I have experienced this problem with the OpenSUSE packaged G02 and G03 drivers up through G02 version 304.121 and G03 version 331.89 and with several of the stock OpenSUSE kernels. With the OpenSUSE packaged drivers and stock kernels, resume from sleep/suspend will fail 25% to 50% of the time. Most recently, I have installed the latest nVidia driver version 340.24 from the nVidia website and the latest kernel version 3.15.6-2.gedc5ddf-desktop from the kernel-stable repo. With this more recent driver/kernel combo, resume from sleep/suspend fails approximately 10% of the time. So, the problem is not gone but it occurs less often with the latest driver and kernel. Also, the failure rate appears higher if I am running the kcometen4 screen saver and the failure rate appears lower if I am not running a screen saver but am using the simple locker instead. I am running OpenSUSE 13.1, KDE 4.13.3 and a nVidia Quadro FX 3600M graphics card on a Dell Precision 6300 laptop. This problem has been reported in the OpenSUSE and KDE forums here: https://forums.opensuse.org/showthread.php/494706-openSUSE-13-1-KDE-inconsi… https://forum.kde.org/viewtopic.php?f=111&t=121590 A very similar problem was also reported as a Ubuntu bug which has purportedly been fixed here: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/… Reproducible: Sometimes Steps to Reproduce: 1. Put the computer in the sleep/suspend state. 2. Bring the computer out of the sleep/suspend state (Resume). Actual Results: 10% to 50% of the time resume from sleep/suspend will fail and the screen will be garbled and frozen. Expected Results: The computer should resume from sleep/suspend without a garbled and frozen display. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18

[Bug 892354] New: YaST2 LDAP config fails
by bugzilla_noreply＠novell.com 18 Aug '14

18 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=892354 https://bugzilla.novell.com/show_bug.cgi?id=892354#c0 Summary: YaST2 LDAP config fails Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: yast2-maintainers(a)suse.de ReportedBy: suse-20050616(a)bgcomp.co.uk QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Opera/9.80 (X11; Linux x86_64) Presto/2.12.388 Version/12.16 YaST2 LDAP server new setup fails with: sh: /usr/sbin/slapadd: Permission denied Reproducible: Always Steps to Reproduce: 1. Configure LDAP to get around command line URL bug 2. Use YaST2 to configure 3. Observe bug Actual Results: YaST2 should configure a new LDAP system, it doas not. Expected Results: We should have an LDAP server up and running -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 892352] New: New Yast2 LDAP setup fails
by bugzilla_noreply＠novell.com 18 Aug '14

18 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=892352 https://bugzilla.novell.com/show_bug.cgi?id=892352#c0 Summary: New Yast2 LDAP setup fails Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: yast2-maintainers(a)suse.de ReportedBy: suse-20050616(a)bgcomp.co.uk QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Opera/9.80 (X11; Linux x86_64) Presto/2.12.388 Version/12.16 Setting up a new LDAP server fails. Command that YaST2 runs is: /usr/lib/openldap/slapd -h ldap:/// ldaps:/// ldapi:/// -F /etc/openldap/slapd.d -u ldap -g ldap -o slp=off However, the URLs should be separated with commans, not spaces, as in: /usr/lib/openldap/slapd -h ldap:///,ldaps:///,ldapi:/// -F /etc/openldap/slapd.d -u ldap -g ldap -o slp=off Reproducible: Always Steps to Reproduce: 1. Run and setup new LDAP server via YaST2 Actual Results: As above Expected Results: LDAP server should start, it doesn't. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 889925] New: totem won't start in openSUSE Factory
by bugzilla_noreply＠novell.com 18 Aug '14

18 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=889925 https://bugzilla.novell.com/show_bug.cgi?id=889925#c0 Summary: totem won't start in openSUSE Factory Classification: openSUSE Product: openSUSE Factory Version: 201407* Platform: i586 OS/Version: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: maikwagner(a)yahoo.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686) AppleWebKit/537.21 (KHTML, like Gecko) konqueror/4.13.80 Safari/537.21 Hello everyone, I did a "zypper dup" to bring Factory to the latest version but got a "Speicherzugriffsfehler" (error while accessing memory). Please have a look at my terminal output and let me know what further information you require: mwagner@linux-59f7:~> totem libGL error: dlopen /usr/lib/dri/updates/i915_dri.so failed (/usr/lib/dri/updates/i915_dri.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden) Speicherzugriffsfehler Reproducible: Always Steps to Reproduce: 1. Running "totem" from the command line. Expected Results: totem should start. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 890454] New: brcmsmac: no power savings
by bugzilla_noreply＠novell.com 18 Aug '14

18 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=890454 https://bugzilla.novell.com/show_bug.cgi?id=890454#c0 Summary: brcmsmac: no power savings Classification: openSUSE Product: openSUSE Factory Version: 201407* Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Firefox/31.0 I have a laptop with a built-in wireless broadcom BCM4313. This device consumes a *lot* of power and (usually, but not always) works. When the module is loaded, powertop reports that it uses between 4 and 6 *Watts*. I have Four other wireless devices here, and they consume far less: ZD1211RW - 600-1300 mW AR5523 - 100-200 mW Rx200 - 100-200 mW rtl8192cu - 100-200 mW This turns my battery life down and (helps to) make the laptop run hot. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 892338] New: Signing mails with Kmail starts to ask for passphrase each time
by bugzilla_noreply＠novell.com 18 Aug '14

18 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=892338 https://bugzilla.novell.com/show_bug.cgi?id=892338#c0 Summary: Signing mails with Kmail starts to ask for passphrase each time Classification: openSUSE Product: openSUSE Factory Version: 201408* Platform: i386 OS/Version: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: robby.engelmann(a)igfs-ev.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Firefox/31.0 I had to generate a new gpg-key pair, because to old one has expired. Using this ney key, each time signing a new email, I have to give the passphrase to a pinentry-qt4 dialogue. However, I am still using an older (not yet expired key) for my private mails. Using this key signing works without a passphrase entry. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 853010] New: crontab(5) doesn't specify parse order of crontab file
by bugzilla_noreply＠novell.com 18 Aug '14

18 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=853010 https://bugzilla.novell.com/show_bug.cgi?id=853010#c0 Summary: crontab(5) doesn't specify parse order of crontab file Classification: openSUSE Product: openSUSE Factory Version: 13.2 Milestone 0 Platform: Other OS/Version: SLES 11 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: sebastian.herbszt(a)tfa.verwalt-berlin.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:24.0) Gecko/20100101 Firefox/24.0 Quote from Debian bug #622645 [1]: crontab(5) leaves it ambiguous what happens when you interleave environment variables and commands, or repeat environment variables. [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=622645 Reproducible: Always Steps to Reproduce: Set up a crontab file with: * * * * * echo test MAILTO="" Actual Results: Output gets mailed to owner. Expected Results: crontab(5) leaves it ambiguous. Tested on SLES 11 with cron-4.1-194.207.1. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 892179] New: Need to include the Graphics libVA library into the SLES distribution
by bugzilla_noreply＠novell.com 18 Aug '14

18 Aug '14

https://bugzilla.novell.com/show_bug.cgi?id=892179 https://bugzilla.novell.com/show_bug.cgi?id=892179#c0 Summary: Need to include the Graphics libVA library into the SLES distribution Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: openSUSE 12.1 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: richard.zatorski(a)intel.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=602530) --> (http://bugzilla.novell.com/attachment.cgi?id=602530) Intel Transcode Program Business justification User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_9_4) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/36.0.1985.125 Safari/537.36 The Intel MSDK Transcode project uses libVA as it's interface into the graphics system. We need this library added to the distro so that we don't have to provide it with our MSDK release. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1