June 2014 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 854343] New: libvirt installation run inappropriate systemd restart
by bugzilla_noreply＠novell.com 11 Aug '16

11 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=854343 https://bugzilla.novell.com/show_bug.cgi?id=854343#c0 Summary: libvirt installation run inappropriate systemd restart Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 12.3 Status: NEW Severity: Normal Priority: P5 - None Component: Xen AssignedTo: jdouglas(a)suse.com ReportedBy: bruno(a)ioda-net.ch QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:25.0) Gecko/20100101 Firefox/25.0 With the new split of libvirt module there's a new effect. libvirtd is firstly installed and the post script run a systemctl try-restart libvirtd.service But all the associated module comes after, and then are not loaded correctly. zypper ps show that at the end you need to restart again libvirtd.service If you have big/slow guest you need to reboot them twice. Reproducible: Always Steps to Reproduce: 1. install libvirtd and run guest 2. update libvirtd 3. you still have to restart it a second time Actual Results: there's still module that have changed Expected Results: Restart libvirtd once every module are loaded. So all the new modules should be (Pre) installed compared to libvirtd Here the log of today update zypper up -r virtualization Loading repository data... Reading installed packages... The following package update will NOT be installed: perl-Term-ProgressBar The following packages are going to be upgraded: guestfs-tools libguestfs0 libvirt libvirt-client libvirt-daemon libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-driver-xen libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-uml libvirt-daemon-vbox libvirt-daemon-xen libvirt-doc libvirt-glib-1_0-0 libvirt-python perl-Sys-Guestfs perl-Sys-Virt typelib-1_0-LibvirtGConfig-1_0 typelib-1_0-LibvirtGLib-1_0 typelib-1_0-LibvirtGObject-1_0 virt-install virt-manager virt-manager-common virt-viewer 35 packages to upgrade. Overall download size: 12.6 MiB. After the operation, additional 463.7 KiB will be used. Continue? [y/n/? shows all options] (y): y Retrieving package libvirt-client-1.2.0-353.1.x86_64 Installing: virt-install-0.10.0-143.1 ......................................................................................................................................[done] There are some running programs that use files deleted by recent upgrade. You may wish to restart some of them. Run 'zypper ps' to list these programs. yoda:/etc/zypp/repos.d # zypper ps The following running processes use deleted files: PID | PPID | UID | Login | Command | Service | Files ------+------+-----+-------+----------+----------+-------------------------------------------------------------------------- 26378 | 1 | 0 | root | libvirtd | libvirtd | /usr/lib64/libvirt/connection-driver/libvirt_driver_network.so;52a337e9 | | | | | | /usr/lib64/libvirt/connection-driver/libvirt_driver_nodedev.so;52a337e9 | | | | | | /usr/lib64/libvirt/connection-driver/libvirt_driver_nwfilter.so;52a337e9 | | | | | | /usr/lib64/libvirt/connection-driver/libvirt_driver_interface.so;52a337e9 | | | | | | /usr/lib64/libvirt/connection-driver/libvirt_driver_libxl.so;52a337e9 | | | | | | /usr/lib64/libvirt/connection-driver/libvirt_driver_secret.so;52a337e9 | | | | | | /usr/lib64/libvirt/connection-driver/libvirt_driver_lxc.so | | | | | | /usr/lib64/libvirt/connection-driver/libvirt_driver_xen.so | | | | | | /usr/lib64/libvirt/connection-driver/libvirt_driver_uml.so | | | | | | /usr/lib64/libvirt/connection-driver/libvirt_driver_vbox.so You may wish to restart these processes. See 'man zypper' for information about the meaning of values in the above table. yoda:/etc/zypp/repos.d # systemctl restart libvirtd.service -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 20

[Bug 784979] New: wxMaxima can not print correctly cyrilloc text (letters)
by bugzilla_noreply＠novell.com 09 Aug '16

09 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=784979 https://bugzilla.novell.com/show_bug.cgi?id=784979#c0 Summary: wxMaxima can not print correctly cyrilloc text (letters) Classification: openSUSE Product: openSUSE 12.2 Version: Final Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kiv(a)mail.orbitel.bg QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/534.34 (KHTML, like Gecko) konqueror/4.8.5 Safari/534.34 When use latin letters to solve some mathematical problem and tnen print evdeery thing is print as expected. When use cyrillic letters on the screen every thing looks as expected but when print to file or to a printer all cyriltlic letters get replaced by unreadable text. Reproducible: Always Steps to Reproduce: 1. Open wxMaxima 2. Solve some problem using cyrillic and latin letters in the worksheet 3. Try to print the workshee to file. 4. Then open the file and check the cyrillic text - it get unreadable Actual Results: The cyrillic text get unreadable when print the worksheet Expected Results: The cyrillic text get unreadable - letters are replaced by some different letters and symbols. Seems like wrong kodepage used. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 828374] New: xscreensavers output core files with SIGSEGV in select () at ../sysdeps/unix/syscall-template.S:81 on VirtualBox .
by bugzilla_noreply＠novell.com 09 Aug '16

09 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=828374 https://bugzilla.novell.com/show_bug.cgi?id=828374#c0 Summary: xscreensavers output core files with SIGSEGV in select () at ../sysdeps/unix/syscall-template.S:81 on VirtualBox . Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 2 Platform: x86-64 OS/Version: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Xfce AssignedTo: bnc-team-xfce(a)forge.provo.novell.com ReportedBy: bkbin005(a)rinku.zaq.ne.jp QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=547002) --> (http://bugzilla.novell.com/attachment.cgi?id=547002) GDB backtrace files and glxinfo's output . User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/27.0.1453.116 Safari/537.36 I am testing openSUSE 13.1 Milestone 2 x86_64 on VirtualBox 4.2.16 r86992 in Windows 7 SP1 64 bit . Host information: https://dl.dropboxusercontent.com/u/86335040/DxDiag17.txt I made VM from the default (Turn OFF "Display"->"Video"->"Enable 3D acceleration") . I installed Xfce and changed Xfce session . And I selected "Setting Manager" -> "Screensaver" . I selected "Random" mode . Then xscreensavers outputted core files with SIGSEGV in select () at ./sysdeps/unix/syscall-template.S:81 . I attach the GDB backtrace files and glxinfo's output . Reproducible: Always Steps to Reproduce: 1. Prepare VirtualBox . 2. Make VM from the default (Turn OFF "Display"->"Video"->"Enable 3D acceleration") . 3. Install openSUSE 13.1 Milestone 2 in VM . 4. Select Xfce Desktop . 5. Login to Xfce Session . 6. Select "Setting Manager" -> "Screensaver" . 7. Select "Random" mode . 8. Wait for dozens of minutes . Actual Results: The xscreensavers output core files many times with SIGSEGV in select () at ./sysdeps/unix/syscall-template.S:81 . Expected Results: The xscreensavers should not output core files . Ubuntu also has the same problem . Please see also: https://bugs.launchpad.net/ubuntu/+source/xscreensaver/+bug/1197750 https://bugs.launchpad.net/ubuntu/+source/xscreensaver/+bug/1197767 https://bugs.launchpad.net/ubuntu/+source/xscreensaver/+bug/1197770 https://bugs.launchpad.net/ubuntu/+source/xscreensaver/+bug/1198037 https://bugs.launchpad.net/ubuntu/+source/xscreensaver/+bug/1198388 https://bugs.launchpad.net/ubuntu/+source/xscreensaver/+bug/1198396 https://bugs.launchpad.net/ubuntu/+source/xscreensaver/+bug/1198408 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 828382] New: xscreensaver crashes with Segmentation fault in kill() at ../sysdeps/unix/syscall-template.S:81 and X screen hangs-up .
by bugzilla_noreply＠novell.com 09 Aug '16

09 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=828382 https://bugzilla.novell.com/show_bug.cgi?id=828382#c0 Summary: xscreensaver crashes with Segmentation fault in kill() at ../sysdeps/unix/syscall-template.S:81 and X screen hangs-up . Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 2 Platform: x86-64 OS/Version: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bkbin005(a)rinku.zaq.ne.jp QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=547006) --> (http://bugzilla.novell.com/attachment.cgi?id=547006) 2 GDB backtrace files . User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/27.0.1453.116 Safari/537.36 I am testing openSUSE 13.1 Milestone 2 x86_64 on VirtualBox 4.2.16 r86992 in Windows 7 SP1 64 bit . Host information: https://dl.dropboxusercontent.com/u/86335040/DxDiag17.txt . I changed a setup of VM of "Setting"->"Display"->"Enable 3D acceleration" into "ON" I changed session into Xfce . I selected Applications Menu->"Setting"->"Setting Manager" . I selected "Personal"->"Screensaver" . I changed "Mode" into "Random Screen Saver" . I selected all screen savers . I turned OFF "Lock Screen After" . I changed "Blank After" into 1 minnutes and "Cycle After" into 1 minutes . I closed "Screensaver Preferences" . And I waited without doing anything for 2 days . The xscreensaver crashed twice during the 2 days with Segmentation fault in kill() at ../sysdeps/unix/syscall-template.S:81 and X screen hanged-up . I attach the GDB backtrace files . Reproducible: Sometimes Steps to Reproduce: 0. Change a setup of VM of "Setting"->"Display"->"Enable 3D acceleration" into "ON" 1. Change session into Xfce . 2. Select "Applications Menu"->"Setting"->"Setting Manager" . 3. Select "Personal"->"Screensaver" . 4. Change "Mode" into "Random Screen Saver" . 5. Select all screen savers . 6. Turn OFF "Lock Screen After" . 7. Change "Blank After" into 1 minnutes and "Cycle After" into 1 minutes . 8. Close "Screensaver Preferences" . 9. Wait a number of days without doing anything . Actual Results: The xscreensaver crashed twice during the 2 days with Segmentation fault in kill() at ../sysdeps/unix/syscall-template.S:81 and X screen hanged-up . Expected Results: The xscreensave shoud not crash and X screen should not hang-up . -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 857438] New: Connecting an external hard disk doesn't mount it automatically
by bugzilla_noreply＠novell.com 09 Aug '16

09 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=857438 https://bugzilla.novell.com/show_bug.cgi?id=857438#c0 Summary: Connecting an external hard disk doesn't mount it automatically Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: i586 OS/Version: openSUSE 12.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: coutantp(a)sfr.fr QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:26.0) Gecko/20100101 Firefox/26.0 Connecting an external hard disk doesn't mount it automatically. However it is possible to mount it manually (mount /dev/sdb1 mnt) On older version (SuseLinux 12.2) that was OK. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 812607] New: Unmounting of network file system takes long time on restart
by bugzilla_noreply＠novell.com 09 Aug '16

09 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=812607 https://bugzilla.novell.com/show_bug.cgi?id=812607#c0 Summary: Unmounting of network file system takes long time on restart Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: tosiara(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:19.0) Gecko/20100101 Firefox/19.0 If SAMBA share is mounted at /mnt/samba and you do restart - it will take long time and you will see last message - "Unmounting /mnt/samba". Looks like network brought down before unmounting network file share Reproducible: Always Steps to Reproduce: 1. Config network to use ifup, connect over wireless and mount SAMBA share 2. Restart the system 3. Usually it takes few seconds to reboot, but this time the screen hangs at "Unmounting /mnt/samba" for about a minute Actual Results: Restart takes long time because it is waiting for unmount Expected Results: It should umnount samba share before bringing network down and do restart quickly -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 714995] New: open-iscsi script does not properly umount iscsi devices
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=714995 https://bugzilla.novell.com/show_bug.cgi?id=714995#c0 Summary: open-iscsi script does not properly umount iscsi devices Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: thomas.saupe(a)novell.com QAContact: qa(a)suse.de Found By: Novell Technical Services Services Priority: 1000 Blocker: --- The code for umounting iscsi device in /etc/init.d/open-iscsi is broken, especially if the iscsi devices are used within multipathing. On system shutdown the umount of the mounted iscsi devices fails but the devices itself get logged out. This leads to a hang of the reboot, since the later the boot.localfs init script tries to umount the iscsi mounts that already have lost their devices. Attached a patch to the open-iscsi init script that corrects this. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 21

[Bug 851573] New: Second SATA drive extremely slow
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=851573 https://bugzilla.novell.com/show_bug.cgi?id=851573#c0 Summary: Second SATA drive extremely slow Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: hecht(a)biopsy.uni-jena.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:25.0) Gecko/20100101 Firefox/25.0 Intel DH77KC, i7, Plextor SSD, Seagate ST2000DM001 HDD Update openSuse 13.1 from 12.3 SSD fast as expected (ca. 450 MB/s), HDD extremely slow, test with hdparm -t shows Timing buffered disk reads: 2 MB in 5.70 seconds = 359.20 kB/sec changing of port to non 6GB/s -> same problem adding WD30EFRX to the second 6GB/s -> same problem for WD-HDD, but Seagate HDD shows full speed now (still on 3GB/s port) /dev/sdc: Model=ST2000DM001-9YN164, FwRev=CC4H, SerialNo=Z24051DJ Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=3907029168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=yes: unknown setting WriteCache=enabled Drive conforms to: unknown: ATA/ATAPI-4,5,6,7 * signifies the current active mode Timing cached reads: 30046 MB in 2.00 seconds = 15038.81 MB/sec Timing buffered disk reads: 488 MB in 3.00 seconds = 162.62 MB/sec With Knoppix 7.0.3 no problems at all, shows normal speed for all drives. Any Idea? Reproducible: Always Steps to Reproduce: 1. Switch on 2. Use hdparm -t on sdb 3. Actual Results: HDD speed about 200-400 kB/sec Expected Results: HDD speed about 180 MB/sec -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 809938] New: osuse12.3, can't acces to sd card with iso format partition
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=809938 https://bugzilla.novell.com/show_bug.cgi?id=809938#c0 Summary: osuse12.3, can't acces to sd card with iso format partition Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: epistemepromeneur(a)free.fr QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=530137) --> (http://bugzilla.novell.com/attachment.cgi?id=530137) how yast disk partition manager sees the sd card User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:19.0) Gecko/20100101 Firefox/19.0 with mandriva tool i created a bootable sd card (8 Gb capacity) containing the iso of opensuse 12.3 x86_64 (4,3 Gb) then i installed with it opensuse 12.3 kde then i insert the sd card then no notification from kde notifier then i launch yast disk partition tool then i go to sdd disk (the sd card) then i see what you can see with the joined capture sd_card_partitions.png for sdd1 partition i don't know if it is an error or not for sdd2 partion it's false. it's not a hpfs/ntfs partition but an iso partition with mandriva 2010.2 i586 kde notifier presents the sd card and i can access to the iso partition with dolphin the mandriva disk manager tool sees well the iso partition i will send a capture of what this tool displays Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 823150] New: Network Manager applet does not show mobile broadband connection information.
by bugzilla_noreply＠novell.com 01 Aug '16

01 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=823150 https://bugzilla.novell.com/show_bug.cgi?id=823150#c0 Summary: Network Manager applet does not show mobile broadband connection information. Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: i586 OS/Version: openSUSE 12.3 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: jcarricksmith(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=542576) --> (http://bugzilla.novell.com/attachment.cgi?id=542576) Annotated screen-shot showing where data is expected and output from lsusb for dongle User-Agent: Mozilla/5.0 (X11; Linux i686; rv:21.0) Gecko/20100101 Firefox/21.0 When the mobile broadband item for a connected service is clicked in the left panel of the Network Manager applet there is much information missing in the displayed information: 1. Connection State 2. Connection Speed 3. MAC address 4. Signal quality 5. Access Technology 6. The Traffic graph is not plotted although the Received: and Transmitted: data changes. 7. The Signal Strength bar at the top does not display anything. In version 11.4 I believe this data was present but I have not seen it in any of the 12.x series. The dongle in use is a Vodafone K3565 which appears to be a rebranded Huawei E220 device. I need to use this device in locations with poor coverage and being able to see its state and performance is exceedingly helpful. Reproducible: Always Steps to Reproduce: 1. Plug in mobile broadband dongle 2. Enable mobile broadband in Network Manager applet. 3. Connect to service. 4. Click to reveal service details. Actual Results: Service details not shown. Expected Results: Service details to be shown uname -a gives:- Linux jlin.site 3.7.10-1.11-desktop #1 SMP PREEMPT Thu May 16 20:27:27 UTC 2013 (adf31bb) i686 i686 i386 GNU/Linux openSUSE 12.3 as installed from promo DVD with all updates. Dell Inspiron 6400. Issue occurs with openSUSE Dark and openSUSE Air themes. Same issue occurred in 12.2 but not in 11.4 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2