December 2013 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 854423] New: Hawk: intermittent "Connection to server timed out - will retry every 15 seconds"
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=854423 https://bugzilla.novell.com/show_bug.cgi?id=854423#c0 Summary: Hawk: intermittent "Connection to server timed out - will retry every 15 seconds" Classification: openSUSE Product: openSUSE Factory Version: 13.2 Milestone 0 Platform: Other OS/Version: Other Status: ASSIGNED Severity: Normal Priority: P5 - None Component: High Availability AssignedTo: tserong(a)suse.com ReportedBy: tserong(a)suse.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- On the status screen, Hawk is intermittently showing "Connection to server timed out - will retry every 15 seconds". openSUSE Factory test VMs on openSUSE 12.3 host. Most recently while trying to generate hb_report from Hawk. Wild guess: too many concurrent long running requests? (This bug description is pretty bad. Please don't use it as a template for other Hawk bug reports. Thank you.) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 854267] New: unable to write to a filebuf open for input and appending
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=854267 https://bugzilla.novell.com/show_bug.cgi?id=854267#c0 Summary: unable to write to a filebuf open for input and appending Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Minor Priority: P5 - None Component: Development AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: giecrilj(a)stegny.2a.pl QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:25.0) Gecko/20100101 Firefox/25.0 Writing to a filebuf open for input and appending fails. Reproducible: Always Steps to Reproduce: 1. Compile and run the following code: #include <cstdlib> #include <fstream> int main () { typedef ::std ::filebuf filebuf; typedef filebuf :: traits_type traits; typedef ::std ::ios_base ios; filebuf a_f; return ! a_f .open ("/dev/null", ios ::in | ios ::app) || traits ::eq_int_type (traits ::eof (), a_f .sputc (0)) || ! a_f .close () ? EXIT_FAILURE : EXIT_SUCCESS; } Actual Results: 1. Failure. Expected Results: 1. Success. Workaround: a_f .open ("/dev/null", ios ::in | ios ::out | ios ::app) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 854427] New: repo caching fails because appdata2solv does not exist
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=854427 https://bugzilla.novell.com/show_bug.cgi?id=854427#c0 Summary: repo caching fails because appdata2solv does not exist Classification: openSUSE Product: openSUSE Factory Version: 13.2 Milestone 0 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: yast2-maintainers(a)suse.de ReportedBy: juwolf(a)suse.com QAContact: jsrain(a)suse.com CC: mls(a)suse.com Found By: --- Blocker: --- During factory installation caching a repo fails (and afterward the complete installation) because appdata2solv which is called in repo2solv cannot be found. This message pops up and can be found in the logs. This appdata2solv call seems being included 6 days ago with this commit: https://github.com/openSUSE/libsolv/commit/3c1f4d97d1d5d469e1bee747776ae547… Therefore I add mls in CC. I can provide full yast-logs if necessary but here is the critical part from y2log: 2013-12-09 04:07:46 <1> haley.arch.suse.de(3126) [zypp] RepoManager.cc(buildCache):1132 openSUSE-13.1-1.40 building cache...yast2 2013-12-09 04:07:46 <1> haley.arch.suse.de(3126) [zypp] RepoManager.cc(buildCache):1163 repo type is yast2 2013-12-09 04:07:46 <1> haley.arch.suse.de(3126) [zypp++] ExternalProgram.cc(start_program):246 Executing 'repo2solv.sh' '-o' '/var/cache/zypp/solv/openSUSE-13.1-1.40/solv' '/var/cache/zypp/raw/openSUSE-13.1-1.40' 2013-12-09 04:07:46 <1> haley.arch.suse.de(3126) [zypp++] ExternalProgram.cc(start_program):402 pid 3446 launched 2013-12-09 04:07:46 <2> haley.arch.suse.de(3126) [zypp] RepoManager.cc(buildCache):1197 /usr/bin/repo2solv.sh: line 226: appdata2solv: command not found 2013-12-09 04:07:46 <2> haley.arch.suse.de(3126) [zypp] RepoManager.cc(buildCache):1197 2013-12-09 04:07:46 <2> haley.arch.suse.de(3126) [zypp] RepoManager.cc(buildCache):1197 gzip: stdout: Broken pipe 2013-12-09 04:07:46 <1> haley.arch.suse.de(3126) [zypp++] ExternalProgram.cc(checkStatus):496 Pid 3446 exited with status 4 2013-12-09 04:07:46 <5> haley.arch.suse.de(3126) [zypp] Exception.cc(log):137 RepoManager.cc(buildCache):1210 THROW: [|] Failed to cache repo (4). 2013-12-09 04:07:46 <5> haley.arch.suse.de(3126) [zypp] Exception.cc(log):137 History: 2013-12-09 04:07:46 <5> haley.arch.suse.de(3126) [zypp] Exception.cc(log):137 - 'repo2solv.sh' '-o' '/var/cache/zypp/solv/openSUSE-13.1-1.40/solv' '/var/cache/zypp/raw/openSUSE-13.1-1.40' 2013-12-09 04:07:46 <5> haley.arch.suse.de(3126) [zypp] Exception.cc(log):137 /usr/bin/repo2solv.sh: line 226: appdata2solv: command not found 2013-12-09 04:07:46 <5> haley.arch.suse.de(3126) [zypp] Exception.cc(log):137 2013-12-09 04:07:46 <5> haley.arch.suse.de(3126) [zypp] Exception.cc(log):137 gzip: stdout: Broken pipe -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 844761] New: Autoyast is missing features from OS12.3
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=844761 https://bugzilla.novell.com/show_bug.cgi?id=844761#c0 Summary: Autoyast is missing features from OS12.3 Classification: openSUSE Product: openSUSE Factory Version: 13.1 Beta 1 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: luizluca(a)tre-sc.gov.br QAContact: jsrain(a)suse.com Found By: --- Blocker: --- Created an attachment (id=562287) --> (http://bugzilla.novell.com/attachment.cgi?id=562287) My autoyast.xml User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.76 Safari/537.36 Hello, I tried my 12.3 autoyast script and some features did not work. 1) Firewall settings not respected. Even with: <firewall> <enable_firewall config:type="boolean">false</enable_firewall> <start_firewall config:type="boolean">false</start_firewall> </firewall> When running installation, at the point that I'm able to configure the setup, firewall will apear as enable. 2) Defined root password is forgot: This question apears correcly. However, when running installation, at the point that I'm able to configure the setup, root is shown as without password. If installed, root does not have a password. The msgs are in pt_BR and they mean: "Senha do root" "Root password" "Digite a senha do root:" "Type the root password:" "Digite a senha que vai ser utilizada pelo usuário root." "Type the password that user root will use." I kept them in pt_BR because it could be something regard utf8. <ask-list config:type="list"> <ask> <title>Senha do root</title> <pathlist config:type="list"> <path>users,0,user_password</path> </pathlist> <question>Digite a senha do root:</question> <stage>initial</stage> <help>Digite a senha que vai ser utilizada pelo usuário root.</help> <password config:type="boolean">true</password> </ask> </ask-list> (...) <users config:type="list"> <user> <fullname>root</fullname> <gid>0</gid> <home>/root</home> <shell>/bin/bash</shell> <uid>0</uid> <username>root</username> </user> </users> 3) sysconfig confs are not applied: I use the configs bellow. None of them got applied after installation. <sysconfig config:type="list"> <sysconfig_entry> <sysconfig_key>DISPLAYMANAGER</sysconfig_key> <sysconfig_path>/etc/sysconfig/displaymanager</sysconfig_path> <sysconfig_value>kdm</sysconfig_value> </sysconfig_entry> <sysconfig_entry> <sysconfig_key>DISPLAYMANAGER_KDM_THEME</sysconfig_key> <sysconfig_path>/etc/sysconfig/displaymanager</sysconfig_path> <sysconfig_value>xxx</sysconfig_value> </sysconfig_entry> <sysconfig_entry> <sysconfig_key>DISPLAYMANAGER_ROOT_LOGIN_LOCAL</sysconfig_key> <sysconfig_path>/etc/sysconfig/displaymanager</sysconfig_path> <sysconfig_value>yes</sysconfig_value> </sysconfig_entry> </sysconfig> kdm is installed correctly (package selecion works) but DISPLAYMANAGER is empty after the installation. I got an old xdm screen. 4) No second stage: I use this mode setup: <mode> <confirm config:type="boolean">true</confirm> <final_halt config:type="boolean">false</final_halt> <final_reboot config:type="boolean">true</final_reboot> <halt config:type="boolean">false</halt> <second_stage config:type="boolean">true</second_stage> </mode> But no second stage apears. So, my second stage scripts did not run. 5) proxy settings is not read I use these settings: <proxy> <enabled config:type="boolean">true</enabled> <ftp_proxy>http://proxy.xxx:3128</ftp_proxy> <http_proxy>http://proxy.xxx:3128</http_proxy> <https_proxy>http://proxy.xxx:3128</https_proxy> <no_proxy>localhost, 127.0.0.1</no_proxy> <proxy_password></proxy_password> <proxy_user></proxy_user> </proxy> But no proxy is defined in /etc/sysconfig/proxy after installation. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 38

[Bug 851708] New: Application:Geo/prunegps: Bug
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=851708 https://bugzilla.novell.com/show_bug.cgi?id=851708#c0 Summary: Application:Geo/prunegps: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Major Priority: P5 - None Component: 3rd party software AssignedTo: opensuse(a)dstoecker.de ReportedBy: erik.kjellson(a)gmail.com QAContact: opensuse-communityscreening(a)forge.provo.novell.com CC: tzotsos(a)gmail.com Found By: Other Blocker: --- After installation of the gpsprune package from the opensuse-application-geo repository I got the following error message when trying to run gpsprune: Error: Could not find or load main class tim.prune.GpsPrune The solution was to change the starter script /usr/bin/gpsprune, I commented the previous content and added this row: java -jar /usr/share/java/gpsprune_15.1.jar $@ After that change to the starter script gpsprune runs fine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 854315] New: Typo in klog.service: Unknown lvalue 'Names' in section 'Unit'
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=854315 https://bugzilla.novell.com/show_bug.cgi?id=854315#c0 Summary: Typo in klog.service: Unknown lvalue 'Names' in section 'Unit' Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jimc(a)math.ucla.edu QAContact: qa-bugs(a)suse.de Found By: Customer Blocker: --- Version: syslog-service-2.0-772.1.2 Upon systemctl daemon-reload, it reports on syslog: Unknown lvalue 'Names' in section 'Unit' Maybe the keyword should be 'Alias'? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 842304] New: Application:Geo: qgis2 crashes on launch
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=842304 https://bugzilla.novell.com/show_bug.cgi?id=842304#c0 Summary: Application:Geo: qgis2 crashes on launch Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86-64 OS/Version: SUSE Other Status: NEW Severity: Critical Priority: P5 - None Component: 3rd party software AssignedTo: opensuse(a)dstoecker.de ReportedBy: pastas4(a)gmail.com QAContact: opensuse-communityscreening(a)forge.provo.novell.com CC: tzotsos(a)gmail.com Found By: --- Blocker: --- Created an attachment (id=560057) --> (http://bugzilla.novell.com/attachment.cgi?id=560057) GDB backtrace When attempting to launch qgis2 on openSUSE 13.1 Beta, with all its Python dependencies met, the program crashes on the splash screen just after loading Python. This happens every time. If I deliberately break a Python dependency, like remove qscintilla, the Python subsystem of qgis2 fails to load, but the program itself launches correctly, so the issue has something to do with Python, possibly with the Python module versions in the current Factory. I'm using Application:Geo Factory, which is at qgis2 2.0.1-1.1 and qgis2-plugin-grass 2.0.1-1.1. The Python packages I'm using are from the main repository of 13.1 Beta. I attached the GDB backtrace. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 849258] New: drop dummy testutf8
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=849258 https://bugzilla.novell.com/show_bug.cgi?id=849258#c0 Summary: drop dummy testutf8 Classification: openSUSE Product: openSUSE Factory Version: 13.1 Beta 1 Platform: All OS/Version: All Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem AssignedTo: lnussel(a)suse.com ReportedBy: sbrabec(a)suse.com QAContact: qa-bugs(a)suse.de CC: jsuchome(a)suse.com Found By: --- Blocker: --- testutf8 no longer exists in its original UTF-8 testing form. The new deprecated testutf8 is just a dummy and does no any UTF-8 detection. All references to it should be dropped: /etc/profile.d/csh.utf8 (aaa_base) /etc/profile.d/sh.utf8 (aaa_base) /usr/lib/YaST2/startup/common/language.sh (yast2-installation) Then testutf8 can be dropped from kbd. For discussion please look at bug 436378. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 748606] New: Need to publish a .treeinfo file in our network install tree for virt-tools
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=748606 https://bugzilla.novell.com/show_bug.cgi?id=748606#c0 Summary: Need to publish a .treeinfo file in our network install tree for virt-tools Classification: openSUSE Product: openSUSE 12.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: vuntz(a)suse.com QAContact: qa(a)suse.de CC: coolo(a)suse.com Found By: --- Blocker: --- Quoting https://www.redhat.com/archives/virt-tools-list/2012-February/msg00201.html ======= We currently have a <media> element for identifying ISO install media. Many distros also provide online install trees, or sysadmin have locally hosted install trees (often from the mounted ISO media). We want to be able to handle install trees, and optionally detect their distro This series adds support for install trees via a new <tree> element. From experiance with virt-install auto-detecting the OS from an install tree is rather hard. The only distros we can reliably do it for are Fedora/RHEL derivatives which publish a '.treeinfo' file with metadata about the OS. virt-install has a bunch of evil hacks for trying to detect other distros based on existance of certain filenames. This series only supports auto-detection for distros which can do a .treeinfo file. I'm not intending to support the other virt-install hacks. ======= Here's an example of such a file: ftp://ftp.proxad.net/mirrors/fedora.redhat.com/fedora/linux/releases/16/Fed… -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 854407] New: yast2 kdump commandline doesn't show any output
by bugzilla_noreply＠novell.com 09 Dec '13

09 Dec '13

https://bugzilla.novell.com/show_bug.cgi?id=854407 https://bugzilla.novell.com/show_bug.cgi?id=854407#c0 Summary: yast2 kdump commandline doesn't show any output Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: yast2-maintainers(a)suse.de ReportedBy: locilka(a)suse.com QAContact: jsrain(a)suse.com Found By: Development Blocker: --- Caused by `Wizard.SetProductName` creating UI by `UI.SetProductName` in constructor. Kdump needs Bootloader, Bootloader needs Product, Product needs Wizard, Wizard needs UI. For obvious reasons, commandline doesn't need UI. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1