https://bugzilla.novell.com/show_bug.cgi?id=795794https://bugzilla.novell.com/show_bug.cgi?id=795794#c0
Summary: installing printer with yast, driver progress bar jump
to 100% and drivers are not shown
Classification: openSUSE
Product: openSUSE 12.2
Version: Final
Platform: Other
OS/Version: openSUSE 12.2
Status: NEW
Severity: Normal
Priority: P5 - None
Component: YaST2
AssignedTo: bnc-team-screening(a)forge.provo.novell.com
ReportedBy: pier_andreit(a)yahoo.it
QAContact: jsrain(a)suse.com
Found By: ---
Blocker: ---
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/17.0
Firefox/17.0
opensuse 12.2 and KDE 4.9.4 on laptop sony vaio VPCEH2N1E
This is a bug that is not reproducible when you want, but it is definitely
reproducible if the progress bar behaviour is like example b).
it happens to me about 2 times on 3 in average when you install a printer by
yast, i doesn't depend on printer, it doesn't depend on driver, I only tested
on network printer connection.
a)when printer installation works (1 time on 3):
a1-click on yast>printer>add
a2-a progress bar (detecting printer) start,
a3-another progress bar (receiving printer driver information) start, fill up
to 60% then suddenly to 100%
a4-the add new printer configuration window appear
a5-click on connection wizard>select TCP port>insert IPaddress>leave TCPport
9100>click on test connection>result is OK>click OK on test>select a printer
manufacturer>click OK on window
a6-the add new printer configuration window appear again
a7-in "find and assign a driver" beside "search for" the printer manufacturer
appear and in the space below a list of drivers appear
a8-I choose my driver, click OK, and printer works ok
with the same printer in the same conditions with the same laptop
b)when printer installation doesn't works (2 time on 3):
b1-click on yast>printer>add
b2-a progress bar (detecting printer) start,
a3-another progress bar (receiving printer driver information) start, fill up
to 4% then suddenly to 100%
b4-the add new printer configuration window appear
b5-click on connection wizard>select TCP port>insert IPaddress>leave TCPport
9100>click on test connection>result is OK>click OK on test>select a printer
manufacturer>click OK on window
b6-the add new printer configuration window appear again
b7-in "find and assign a driver" beside "search for" the printer manufacturer
appear and in the space below NO DRIVERS, TOTALLY EMPTY, EVEN IF I CHANGE THE
PRINTER MANUFACTURER, OR EMPTY PRINTER MANUFACTURER AND CLICK ON FIND MORE
b8-I cannot choose my driver and cannot install the printer, even if in the
previous b-7 I choose "driver packages" and choose a ppd driver that works for
that printer
thnx, ciao, pier :-)
Reproducible: Sometimes
Steps to Reproduce:
1.
2.
3.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=795856https://bugzilla.novell.com/show_bug.cgi?id=795856#c0
Summary: Help text for the YaST NTP module contains duplicate
text (and misses items)
Classification: openSUSE
Product: openSUSE 12.2
Version: Final
Platform: All
OS/Version: openSUSE 12.2
Status: NEW
Severity: Normal
Priority: P5 - None
Component: YaST2
AssignedTo: bnc-team-screening(a)forge.provo.novell.com
ReportedBy: gp(a)suse.com
QAContact: jsrain(a)suse.com
Found By: Product Management
Blocker: ---
Created an attachment (id=518245)
--> (http://bugzilla.novell.com/attachment.cgi?id=518245)
Screenshot
See the attached screenshot.
The first item is described twice (in exactly the same words).
Other items on the same screen are not described at all.
(Possibly this should be two reports; feel free to clone or advise,
and I'll do.)
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=779057https://bugzilla.novell.com/show_bug.cgi?id=779057#c0
Summary: KDE4 Battery monitor doesnt show remaining time
Classification: openSUSE
Product: openSUSE 12.2
Version: Final
Platform: x86-64
OS/Version: openSUSE 12.2
Status: NEW
Severity: Normal
Priority: P5 - None
Component: KDE4 Workspace
AssignedTo: kde-maintainers(a)suse.de
ReportedBy: highwaystar.ru(a)gmail.com
QAContact: qa-bugs(a)suse.de
Found By: ---
Blocker: ---
Created an attachment (id=504703)
--> (http://bugzilla.novell.com/attachment.cgi?id=504703)
KDE battery monitor doesnt show remaining time
User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.4 (KHTML,
like Gecko) Chrome/22.0.1226.0 Safari/537.4 SUSE/22.0.1226.0
KDE4 battery monitor doesn't show remaining time when charging/discharging on
my Thinkpad T61.
I've also tried to manually set showRemainingTime=true in
~/.kde4/share/config/plasma-desktop-appletsrc with no result
Reproducible: Always
Steps to Reproduce:
1. Install openSUSE 12.2 with KDE4 on a laptop
2. Click Battery Monitor Plasmoid
3. Checkif it doesnt show remaining time
Actual Results:
Battery monitor doesnt show remaining time
Expected Results:
Battery monitor should show remaining time
console utils show remaining time - so I think acpi works and it is KDE issue
only
acpi -i
Battery 0: Discharging, 57%, 02:12:21 remaining
Battery 0: design capacity 6375 mAh, last full capacity 6375 mAh = 100%
upower -i /org/freedesktop/UPower/devices/battery_BAT0
native-path:
/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0A:00/power_supply/BAT0
vendor: SANYO
model: 92P1137A
serial: 13
power supply: no
updated: Thu Sep 6 22:30:14 2012 (4 seconds ago)
has history: yes
has statistics: yes
battery
present: yes
rechargeable: yes
state: discharging
energy: 41.28 Wh
energy-empty: 0 Wh
energy-full: 71.28 Wh
energy-full-design: 71.28 Wh
energy-rate: 17.825 W
voltage: 11.197 V
time to empty: 2.3 hours
percentage: 57.9125%
capacity: 100%
technology: lithium-ion
History (charge):
1346938214 57.912 discharging
1346938184 58.123 discharging
1346938154 58.333 discharging
1346938124 58.558 discharging
History (rate):
1346938214 17.825 discharging
1346938184 18.033 discharging
1346938154 20.246 discharging
1346938124 19.728 discharging
solid-hardware details /org/freedesktop/UPower/devices/battery_BAT0
udi = '/org/freedesktop/UPower/devices/battery_BAT0'
parent = '/org/freedesktop/UPower' (string)
vendor = 'SANYO' (string)
product = '92P1137A' (string)
description = 'Lithium Ion Battery' (string)
Battery.plugged = true (bool)
Battery.type = 'PrimaryBattery' (0x3) (enum)
Battery.chargePercent = 58 (0x3a) (int)
Battery.rechargeable = true (bool)
Battery.chargeState = 'Discharging' (0x2) (enum)
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=796254https://bugzilla.novell.com/show_bug.cgi?id=796254#c0
Summary: Simple Scan is outdated
Classification: openSUSE
Product: openSUSE 12.2
Version: Final
Platform: 64bit
OS/Version: openSUSE 12.2
Status: NEW
Severity: Enhancement
Priority: P5 - None
Component: GNOME
AssignedTo: bnc-team-gnome(a)forge.provo.novell.com
ReportedBy: ametedinov(a)gmail.com
QAContact: qa-bugs(a)suse.de
Found By: ---
Blocker: ---
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:14.0) Gecko/20100101
Firefox/14.0.1
The latest packaged version of simple scan available for openSUSE is several
versions older than the current version. Please provide an installer package as
an update with a more recent version.
I recently joined the Simple Scan developers team as a documentation writer but
because of the aforementioned, I am unable to test and document the latest
features. I tried installing from source, but for some reason it did not work
on OpenSUSE.
Reproducible: Always
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.